Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Gu, X.-H." wg kryterium: Autor


Wyświetlanie 1-6 z 6
Tytuł:
A generalized equivalent temperature model in a time-varying environment
Uogólniony model temperatury równoważnej w zmiennym w czasie otoczeniu
Autorzy:
Sun, L.
Gu, X.-H.
Song, P.
Di, Y.
Powiązania:
https://bibliotekanauki.pl/articles/301556.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
przyspieszone badania starzenia
temperatura równoważna
przechowywanie w warunkach naturalnych
krzywa degradacji
oringi nitrylowe
accelerated degradation test
equivalent temperature
nature storage
degradation path
rubber Orings
Opis:
Accelerated degradation test at high temperature level is a common method to accelerate the degradation of products by elevating temperature, and the obtained degradation data are then used to obtain the estimate of the performance at normal temperature after extrapolating the degradation through accelerating model. However, the normal temperature is ever-changing rather than constant. Therefore, a generalized equivalent temperature model based on power law degradation path is proposed to establish a connection between accelerated degradation data and degradation data at normal temperature. The model takes the equal degradation measure as a principle and the conclusion is demonstrated that the increments of the degradation under the same magnitude, same time and different orders of temperature stresses are same. The result shows that the empirical equivalent temperature model is a special case of the proposed model. The accuracy of the proposed model is finally demonstrated by a case study of nitrile rubber O-rings.
Przyspieszone badania degradacji (badania starzeniowe) prowadzone w warunkach wysokiej temperatury stanowią powszechnie stosowaną metodę przyspieszania starzenia produktów poprzez podwyższanie temperatury. Otrzymane w takich badaniach dane degradacyjne wykorzystuje się do szacowania wydajności produktu w temperaturze normalnej na zasadzie ekstrapolacji. Głównym ograniczeniem tej metody jest fakt, że normalna temperatura nie jest stała lecz zmienia się w czasie. Dlatego też, aby skorelować dane z przyspieszonej degradacji z danymi dotyczącymi starzenia w normalnej temperaturze, zaproponowaliśmy uogólniony model temperatury równoważnej oparty na krzywej degradacji opisanej prawem potęgowym. W modelu przyjęto zasadę równego stopnia degradacji i wykazano, że przyrosty degradacji przy tej samej wartości i czasie działania naprężeń termicznych różnego rzędu są takie same. Wyniki pokazują, że empiryczny model temperatury równoważnej jest szczególnym przypadkiem proponowanego przez nas modelu. Trafność opisanego w pracy modelu wykazano na podstawie studium przypadku dotyczącego uszczelek nitrylowych, tzw. oringów.
Źródło:
Eksploatacja i Niezawodność; 2017, 19, 3; 432-440
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hybrid methodology of degradation feature extraction for bearing prognostics
Metodyka hybrydowa ekstrakcji cech degradacji do zastosowań w prognozowaniu czasu życia łożysk
Autorzy:
Gu, H.
Zhao, J.
Zhang, X.
Powiązania:
https://bibliotekanauki.pl/articles/302055.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
ekstrakcja cech
degradacja
sygnał
łożysko
feature extraction
degradation
signal
bearing
Opis:
Hybrid methodology of degradation feature extraction was presented which may enable prediction of remaining useful life of a product. In this methodology, firstly, the signal was de-noised by wavelet analysis. Then the autoregressive model was used to remove the discrete frequencies from de-noised signal. Further, the residual signal which mainly contained impulsive fault signal was enhanced by minimum entropy deconvolution filter. The kurtosis was extracted which was taken as the feature for prognostics. At last, the empirical mode decomposition was used to reduce fluctuation of feature value and to extract the trend content. A case study was presented to verify the effectiveness of the proposed method.
Przedstawiono hybrydową metodę ekstrakcji cech degradacji, która umożliwia przewidywanie pozostałego okresu użytkowania produktu. W tej metodyce, sygnał został najpierw odfiltrowany z wykorzystaniem analizy falkowej. Następnie, za pomocą modelu autoregresyjnego usunięto z pozbawionego szumów sygnału częstotliwości dyskretne. W dalszej kolejności, sygnał resztkowy, który zawierał głównie impulsowy sygnał uszkodzenia został wzmocniony z zastosowaniem filtru dekonwolucji minimum entropii. Obliczono kurtozę, którą przyjęto jako cechę w procesie prognozowania. Na koniec, zastosowano empiryczną dekompozycję sygnału (EMD) w celu zmniejszenia wahań wartości cechy oraz w celu ekstrakcji trendu. Studium przypadku demonstruje efektywność proponowanej metody.
Źródło:
Eksploatacja i Niezawodność; 2013, 15, 2; 195-201
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ship Course Following and Course Keeping in Restricted Waters Based on Model Predictive Control
Autorzy:
Liu, H.
Ma, N.
Gu, X. C.
Powiązania:
https://bibliotekanauki.pl/articles/116264.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Ship Movement, Multiple-Input Multiple-Output (MIMO)
Very Large Crude Carrier (VLCC)
Model Predictive Control (MPC)
Linear Quadratic Regulator (LQR)
course
restricted waters
safety at sea
Opis:
Ship navigation safety in restricted water areas is of great concern to crew members, because ships sailing in close proximity to banks are significantly affected by the so-called ship-bank interaction. The purpose of this paper is to apply the optimal control theory to help helmsmen adjust ships’ course and maintain the target course in restricted waters. To achieve this objective, the motion of a very large crude carrier (VLCC) close to a bank is modeled with the linear equations of manoeuvring and the influence of bank effect on the ship hydrodynamic force is considered in the model. State-space framework is cast in a Multiple-Input Multiple-Output (MIMO) system, where the offset-free model predictive control (MPC) is designed for course following and the linear quadratic regulator (LQR) is used for course keeping. Simulation results show that the control methods effectively work in ship course following and course keeping with varying ship-bank distances and water depths. The advantage of adopting speed variation as the second control input is obvious.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2018, 12, 2; 305-312
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical study of hydrodynamic derivatives and course stability under ship-bank interaction
Autorzy:
Liu, H.
Ma, N.
Gu, X. C.
Powiązania:
https://bibliotekanauki.pl/articles/116925.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
safety at sea
ship-bank interaction
Reynolds-Averaged Navier-Stokes (RANS)
hydrodynamic derivatives
hydrodynamics
Planar Motion Mechanism (PMM)
Circulating Water Channel (CWC)
User Defined Functions (UDF)
Opis:
Since ship-bank interaction affects the manoeuvrability of a ship navigating close to a bank, the determination of hydrodynamic derivatives is of great importance to assess the ship manoeuvrability. To obtain the hydrodynamic derivatives of the KVLCC2 model ship with different water depths and ship-bank distances, the simulation of PMM tests are carried out using an unsteady Reynolds-Averaged Navier–Stokes (RANS) based solver. Hybrid dynamic mesh technique is proposed to realize the simulation of pure yaw tests in confined water. Studies on the grid convergence and time-step-size convergence are firstly performed. Hydrodynamic derivatives for the ship in different water depths and ship-bank distances are compared. The course stability is investigated based on time-domain simulations and eigenvalue analysis, and the results show that the ship-bank interaction and shallow water effect have a remarkable influence on the course stability.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2018, 12, 4; 747-753
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geometric Model for Multi-axial Warp-knitted Fabric Based on NURBS
Model geometryczny wieloosiowej dzianiny osnowowej oparty na krzywych NURBS
Autorzy:
Jiang, G
Gu, L
Cong, H L
Miao, X H
Zhang, A
Gao, Z
Powiązania:
https://bibliotekanauki.pl/articles/232674.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
warp knitting
multi-axial
geometric model
3D simulation
fibre volume fraction
struktura systemu przędz
modelowanie przędz
osnowowe dzianiny wieloosiowe
3D przędz
Opis:
Based on studying the constitution of yarn system and the geometric modality of relevant yarns in the multi-axial warp-knitted structure, 3D solid models of the loop yarns, insertion yarns and chopped strand mat in modern multi-axial warp-knitted fabrics were built to reflect the geometric structures of the three items by using NURBS curves and the principle of curved surfaces. Besides, OpenGL was employed to explore the corresponding 3D computer simulation system under the condition of VC++.NET, which could simulate the geometric model of multi-axial warp-knitted fabric. Meanwhile, through the selection of the unit cell of the fabric, the unit cell model of modern multi-axial warp-knitted fabric with chopped strand mat was developed and the relation between geometric parameters and process variables was deduced. The theoretical fibre volume fraction formula of modern multi-axial warp-knitted fabric with chopped strand mat was obtained as well. Furthermore, by using different specifications of fabric as samples, theoretical and experimental values of the fibre volume fraction were compared. The results revealed that there was good agreement between the theoretical and experimental values, which proved that the model was scientific and practical.
Na podstawie badań struktury systemu przędz i geometrycznej modalności odpowiednich przędz w wieloosiowej dzianej strukturze osnowowej opracowano modele brył 3D przędz pętli, przędz wprowadzanych i struktur z włókien odcinkowych we współczesnych wieloosiowych dzianinach osnowowych w celu zobrazowania ich geometrycznych struktur dzięki zastosowaniu krzywych NURBS i reguł dotyczących zakrzywionych powierzchni. Oprócz tego zastosowano program OpenGL dla zbadania systemu symulacji komputerowej 3D przy warunkach VC++.NET, co pozwala na symulację geometrycznego modelu wieloosiowych dzianin osnowowych. Jednocześnie dzięki selekcji komórki podstawowej dzianiny opracowano model takiej komórki podstawowej dla konfiguracji wcześniej opisanej. Określono również zależności pomiędzy parametrami geometrycznymi a zmiennymi procesowymi. Uzyskano teoretyczną objętość włókien, następnie korzystając ze specyfikacji różnego rodzaju próbek określono zależności pomiędzy teoretycznymi i eksperymentalnymi wartościami objętości poszczególnych frakcji włókien. Wyniki wykazały, że istnieje zgodność pomiędzy teoretycznymi i eksperymentalnymi wartościami, co oznacza, że opracowany model jest naukowo uzasadniony i możliwy do stosowania w praktyce.
Źródło:
Fibres & Textiles in Eastern Europe; 2014, 3 (105); 91-97
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
17 beta-estradiol affects proliferation and apoptosis of canine bone marrow mesenchymal stem cells in vitro
Autorzy:
Zhou, Z.-H.
Gu, C.-W.
Li, J.
Huang, X.-Y.
Deng, J.-Q.
Shen, L.-H.
Cao, S.-Z.
Deng, J.-L.
Zuo, Z.-C.
Wang, Y.
Ma, X.-P.
Ren, Z.-H.
Yu, S.-M.
Powiązania:
https://bibliotekanauki.pl/articles/2087308.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
apoptosis
bone marrow mesenchymal stem cells (BMSCs)
canine
proliferation
17 beta-estradiol (E2)
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 2; 235-245
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-6 z 6

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies