Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Gieleta, Roman." wg kryterium: Autor


Wyświetlanie 1-11 z 11
Tytuł:
Effect of Test Velocity on the Specific Energy Absorption under Progressive Crushing of Composite Tubes
Autorzy:
Ryzińska, Grażyna
Gieleta, Roman
Powiązania:
https://bibliotekanauki.pl/articles/102741.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
CFRP
energy absorption
progressive crushing
crashworthiness
SHPB
velocity
pochłanianie energii
stopniowe kruszenie
odporność na uderzenia
prędkość
Opis:
The paper presents the results of the compression tests for carbon-epoxy composites in order to assess the amount of energy absorbed depending on the process velocity and content of axial fibres. Two types of prepreg (UD 200 g/m2 and woven 160 g/m2) were used to prepare the specimens with a diameter of 20 mm and a height of 34 mm. The specimens were subjected to compression under various speed conditions (static, dynamic and SHPB tests). The calculated specific energy absorption values showed a 50–60% decrease with increasing process velocity and depending on the type of specimens architecture. The highest energy values were absorbed by the specimens with the highest share of axial fibres in the sample.
Źródło:
Advances in Science and Technology. Research Journal; 2020, 14, 2; 94-102
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of temperature on the damping characteristic of hydraulic shock absorbers
Autorzy:
Hryciów, Zdzisław
Rybak, Piotr
Gieleta, Roman
Powiązania:
https://bibliotekanauki.pl/articles/1841747.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
hydraulic shock absorber
performance
damping factor
temperature
dissipation energy
Opis:
This paper presents the results of bench-tests and calculations assessing the influence of temperature on the performance of a two-pipe hydraulic shock absorber. The shock absorber prepared for the tests was cooled with dry ice to a temperature corresponding to that associated with the average winter conditions in a temperate climate. The temperature range of the shock absorber during testing was ensured via equipping it with a thermocouple and monitoring it with a thermal imaging camera. During testing, the shock absorber was subjected to kinematic forces of a selected frequency with two different, fixed displacement amplitudes. The results of the tests showed a direct correlation between the decrease of component resistance at lower temperatures. The rate of change in resistance was higher at lower temperatures. It was also found that the energy dissipated in one shock cycle decreased linearly with an increasing temperature. Finally, a method for determining the ideal use temperature of the shock absorber for the assumed operating conditions was also presented.
Źródło:
Eksploatacja i Niezawodność; 2021, 23, 2; 346-351
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Testing the attenuation capabilities of ballistic shields made using 3D printing
Badanie zdolności tłumiących osłon balistycznych wykonanych techniką druku 3D
Autorzy:
Wierzbicka, Karolina
Paszula, Józef
Gieleta, Roman
Komorek, Zenon
Powiązania:
https://bibliotekanauki.pl/articles/27787795.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
blast wave
blast wave attenuation
3D printing technique
sandwich structures
negative Poisson’s ratio
auxetic structures
fala podmuchowa
tłumienie fali podmuchowej
technika druku 3D
struktury typu sandwich
ujemny współczynnik Poissona
struktury auksetyczne
Opis:
The paper describes a study of the blast wave energy absorption capabilities of sandwich ballistic shields. A comparative study of multilayer structures containing cores with different elementary cell shapes in their structure was performed. Energy-absorbing layers of different types of polymers were made. Tests of static and dynamic properties of the ballistic shield layers were carried out. The attenuation capabilities of these shields were determined by measuring the force acting on the base substrate of the shield.
W pracy zaprojektowano i wykonano osłony balistyczne typu sandwich oraz przeprowadzono badania zdolności absorbowania energii fali podmuchowej. Przeprowadzono porównawcze badania struktur wielowarstwowych zawierających w swojej strukturze rdzenie o różnych kształtach komórek elementarnych. W badaniach przygotowano warstwy wykonane z różnych typów materiałów. Przeprowadzono badania właściwości statycznych i dynamicznych zaprojektowanych warstw osłon balistycznych. Zdolność tłumiącą wytypowanych osłon określano poprzez pomiar siły działającej na podstawę osłony.
Źródło:
Materiały Wysokoenergetyczne; 2022, 14; 58--75
2083-0165
Pojawia się w:
Materiały Wysokoenergetyczne
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-11 z 11

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies