Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Gawron, B." wg kryterium: Autor


Tytuł:
A method of assessing the tendency of aviation fuels to generate thermal degradation products under the influence of high temperatures
Autorzy:
Sarnecki, J.
Gawron, B.
Powiązania:
https://bibliotekanauki.pl/articles/246718.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
jet fuel
turbine engine
thermal stability
test rig
non-standard method
Opis:
The subject of the article concerns the issues associated with thermal degradation of aviation fuels under high temperature conditions. Due to the intensive development towards increasingly higher thermal loads for both, turbine aviation engines, as well as the used fuels, the issue of thermal stability of the fuel itself is extremely important. In aviation, the fuel, apart from direct participation in energy generation during the combustion process of a fuel-air mixture, also takes part in the heat transfer in many aircraft systems. As a result, requirements in terms of the fuel’s thermal potential are increasingly higher. The standard method for determining the thermal stability of fuel executed on a JFTOT device proves to be insufficient in the context of the appearing issues in current operation. The article presents a non-standard approach to the assessment of aviation fuel thermal degradation with the use of a specialist test rig. The authors believe that the presented methodology and the measurement capabilities of the test rig are valuable supplementary material for the standardized thermal stability test. It allows more thoroughly understanding the phenomena undergoing in the fuel impacted by high temperatures. The article has been prepared within the research project no. 2011/01/D/ST8/06567 funded by the National Science Centre in Poland.
Źródło:
Journal of KONES; 2017, 24, 4; 377-384
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement of exhaust gas emissions from miniature turbojet engine
Autorzy:
Gawron, B.
Białecki, T.
Powiązania:
https://bibliotekanauki.pl/articles/133535.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
combustion process
effect on environment
exhaust gas emission
miniature turbojet engine
proces spalania
wpływ na środowisko
emisja spalin
miniaturowe silniki turboodrzutowe
Opis:
This paper presents a methodology developed to measure exhaust gas emissions during operation of a miniature turbojet engine, using a laboratory test rig. The rig has been built for research and development works aimed at modelling and investigating processes and phenomena occurring in jet engines. The miniature jet engines, similarly to full–scale ones used commonly in air transport, are characterized by variable exhaust gas emissions, depending on engine operating parameters. For this reason, an attempt has been made to determine the characteristic features of miniature engine operation modes and to define the variability of operation parameters and exhaust gas emissions as a function of time. According to the authors, the preliminary tests allowed for defining specific profile of engine test, which enables proper measurement regarding exhaust gas emissions using the miniature jet engine. The paper also presents test results for Jet A-1 fuel, according to the used methodology.
Źródło:
Combustion Engines; 2016, 55, 4; 58-63
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of adding 2-ethylhexanol to jet fuel on the performance and combustion characteristics of a miniature turbojet engine
Autorzy:
Gawron, B.
Białecki, T.
Król, A.
Powiązania:
https://bibliotekanauki.pl/articles/247180.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
alternative fuels
alcohol to jet
combustion process
miniature jet engine
exhaust emission
paliwa alternatywne
proces spalania
miniaturowy silnik odrzutowy
emisja spalin
Opis:
There are currently many studies undergoing in the field of using alternative fuels for supplying different types of propulsion units. The ASTM standard in the aerospace industry, allows using five different technologies of manufacturing synthetic components apart from standard oil-based fuel for the propulsion of turbine engines (as a blend up to 50% with conventional fuel). One of these is a technology associated with the process of converting alcohols (isobutanol) to jet fuel – Alcohol to Jet (ATJ). In the research performance, emission parameters were measured on laboratory test rig with miniature turbojet engine (MiniJETRig). The test rig has been created in Air Force Institute of Technology for research and development works aimed at alternative fuels for aviation. The miniature engine was fuelled with conventional jet fuel – Jet A-1 and blend of Jet A-1 with 2-ethylhexanol. The results for this blend were compared with the results obtained for neat Jet A-1 fuel in terms of different engine operating modes, according to specified methodology. The conducted tests did not show significant differences in engine operating parameters (thrust, fuel consumption and thrust specific fuel consumption) and the values of CO, CO2 and NOx emission indices between the tested fuels. The engine tests took place in similar ambient conditions. Laboratory tests of selected physicochemical properties were also carried out for both fuel samples.
Źródło:
Journal of KONES; 2018, 25, 1; 101-109
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of transient heat transfer in composite walls using carbon/epoxy composites as an example
Autorzy:
Terpiłowski, J.
Gawron, B.
Woroniak, G.
Powiązania:
https://bibliotekanauki.pl/articles/240268.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermal properties
flash method
thermal diffusivity
carbon composites
epoxy composites
carbon fiber
epoxy resin
właściwości termiczne
metoda impulsowa
dyfuzyjność cieplna
kompozyty węglowe
kompozyty epoksydowe
włókno węglowe
żywica epoksydowa
Opis:
The paper presents the application of similarity theory to investigations of transient heat transfer in materials with complex structure. It describes the theoretical-experimental method for identification and design of the structure of two-component composite walls based on the research of the thermal diffusivity for the composite and its matrix separately. The thermal diffusivity was measured by means of the modified flash method. The method was tested on two samples of double-layer ‘epoxy resin – polyamide’. All the investigated samples had the same diameter of 12 mm and thickness ranging from 1.39–2.60 mm and their equivalent value of thermal diffusivity ranging from (1.21–1.98)×10-7 m2/s. Testing the method and research on carbon/epoxy composites was carried out at temperatures close to room temperature.
Źródło:
Archives of Thermodynamics; 2015, 36, 4; 87-105
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Low temperature properties of fuel mixtures of kerosene and fame type used to supply turbine engines in marine and other non-aeronautical applications
Autorzy:
Dzięgielewski, W.
Gawron, B.
Kulczycki, A.
Powiązania:
https://bibliotekanauki.pl/articles/260024.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
jet fuel
biocomponents
marine turbine engine
low temperature properties
Opis:
A worldwide trend to popularise gradually increasing use of biofuels in various applications was a motivation for gaining interest in FAME as a commonly available biocomponent to fuels combusted in turbine engines. These engines are mainly used in aeronautics, but many of them are also used in other, non-aeronautical areas, including marine navigation. Specific conditions in which fuels are combusted in turbine engines used in these applications are the reason why fuel mixtures of kerosene and FAME type should reveal relevant low temperature characteristics. The article presents results of tests of low temperature properties of mixtures of the jet fuel Jet A-1 and methyl esters of higher fatty acids (FAME). The prepared mixtures contained different contents of FAME. The obtained results present changes of: viscosity, cloud point, pour point, crystallising point, and cold filter plugging point, depending on the percentage by volume of FAME. They also prove that the course of changes of low temperature properties of these mixtures is affected by chemical structure of the biocomponent.
Źródło:
Polish Maritime Research; 2015, 2; 101-105
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance and emission characteristic of miniature turbojet engine FED Jet A-1/alcohol blend
Autorzy:
Gawron, B.
Białecki, T.
Dzięgielewski, W.
Kaźmierczak, U.
Powiązania:
https://bibliotekanauki.pl/articles/244998.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
miniature jet engine
alternative fuels
exhausts emission
Opis:
This paper presents differences between fossil fuel (Jet A-1) and alcohol/Jet A-1 blend, during combustion process using laboratory test rig with miniature turbojet engine (MiniJETRig). The test rig has been created in Air Force Institute of Technology for research and development works aimed at alternative fuels for aviation. Fuel from different feedstock (non-fossil sources) is introduced into market due to ecological aspects, fuel price stability and energy security. Application of alcohol to propel aircraft has started form using a blend of aviation gasoline with ethanol in spark-ignited internal-combustion engines. Taking into account that large part of aviation fuels used by commercial aircraft is jet fuels, so in this area it has begun to look for possibilities to apply alcohol component. In 2016, international standard (ASTM) approved a synthetic blending component for aviation turbine fuels for use in civil aircraft and engines – alcohol-to-jet synthetic paraffinic kerosene (ATJ-SPK). According to standard, ATJ-SPK synthetic blending components shall be comprised hydro processed synthetic paraffinic kerosene wholly derived from isobutanol processed through dehydration, oligomerization, hydrogenation and fractionation. Two different fuel samples, a traditional fossil jet fuel (Jet A-1) and a blend of 10% butanol with Jet A-1 were tested. Laboratory tests of selected physicochemical properties and bench tests with the same profile of engine test were carry out for both fuel samples. The obtained results: engine parameters and exhaust gas emissions are compared and discussed.
Źródło:
Journal of KONES; 2016, 23, 1; 123-129
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The role of molecularly ordered structures in energy transport enhancement during combustion process : a new conception of a reaction mechanism of fuel components oxidation
Autorzy:
Białecki, T.
Dzięgielewski, W.
Gawron, B.
Kaźmierczak, U.
Kulczycki, A.
Powiązania:
https://bibliotekanauki.pl/articles/245703.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
molecular clusters
turbojet engine
butanol
combustion process
carbon oxide emission
Opis:
This article presents the results of investigations focused on the role of molecularly ordered structures (molecular clusters) on combustion process. The proposed new mechanism of the reactions initiation takes into account the role of molecular clusters in energy (heat and energy of electrons emitted by the surface of the walls of combustion chamber) conductivity regulation. Literature survey shows that molecular clusters created by aromatic hydrocarbons are responsible for particulate matter. The combustion process itself is not uniform in whole combustion chamber. Such diversity, caused mainly by heterogeneous thermal state of combustion chamber is recognized as significant reason to create various products of combustion including carbon oxides, carbon dioxides and nitrogen oxides. Jet fuel and its blends with n-butanol and biobutanol in concentration from 10 to 75 % (V/V) were subjected to laboratory tests. Such blends were also tested on the test rig with a miniature turbojet engine – MiniJETRig. Engine operating parameters and carbon oxide emission were measured. The relations between electrical conductivity and parameters of engine test (e.g. temperature in selected points in combustion chamber) were assessed. Engine tests were carried out according to specific profile of engine test, which models different engine operating modes. The results of experimental investigations, shown in the article, initially confirm the proposed mechanism of the oxidation reactions initiation during combustion process.
Źródło:
Journal of KONES; 2018, 25, 4; 17-24
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Emission of volatile organic compounds during combustion process in a miniature turbojet engine
Autorzy:
Janicka, A. B.
Zawiślak, M.
Gawron, B.
Górniak, A.
Białecki, T.
Powiązania:
https://bibliotekanauki.pl/articles/208236.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
turbojet engine
alternative fuels
organic compounds
aviation fuel
volatile organic compounds
silnik turboodrzutowy
paliwa alternatywne
związki organiczne
paliwo lotnicze
lotne związki organiczne
Opis:
Aviation is one of the fastest growing modes of transport. Due to the growing number of flights, the consumption of aviation fuels (mainly jet fuels) keeps increasing. The combustion process in the aircraft engine results in harmful exhaust emissions having an adverse impact on the environment. Alternative fuels based on bio-components and biofuels are a way of reducing the harmful exhaust emissions. Analyses and measurements performed on real aircraft engines are complex and expensive. For this reason, increasingly more research and development projects have been carried out on small-scale engines. This paper presents investigations into volatile organic compound emissions from jet fuel combustion in a miniature turbojet engine. Based on chromatography tests, the compositions of exhaust gases produced by the jet engine fed with various fuels were determined, which in turn led to evaluation of its toxicity and harmfulness. Conventional fossil-based fuel Jet A-1 and a blend of Jet A-1 with 25 vol. % of biobutanol were tested at the same fuel flow rates. The engine working parameters such as, e.g., thrust or emission index have been determined with respect to the type of fuel. The test results have been compared and analyzed.
Źródło:
Environment Protection Engineering; 2018, 44, 4; 57-67
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zarządzanie nieruchomościami we Wrocławiu w kontekście przygotowania bazy hotelowej dla potrzeb EURO 2012
Management of hotel real estate in Wrocław city in context of hotel base preparations for the european football Championships EURO 2012
Autorzy:
Berdychowska, E.
Gawron, K.
Hoła, B.
Powiązania:
https://bibliotekanauki.pl/articles/402912.pdf
Data publikacji:
2011
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
zarządzanie nieruchomościami
nieruchomość komercyjna
hotel
property management
commercial property
Opis:
W referacie przedstawiono analizy dotyczące rozwoju inwestycji hotelowych we Wrocławiu na przestrzeni ostatnich 20 lat, ze szczególnym uwzględnieniem działań związanych z organizacją Mistrzostw Europy w Piłce Nożnej EURO 2012. Nakreślono problemy związane z zarządzaniem nieruchomościami hotelowymi, należącymi do licznej grupy nieruchomości komercyjnych. Zaprezentowano także nowe spojrzenie na zarządzanie nieruchomościami komercyjnymi, polegające na poszerzeniu pola zainteresowań nieruchomością pod kątem zwiększenia zadowolenia jej użytkowników.
The paper presents the analysis concerning the development of the hotel investments in Wrocław during the last 20 years, and particularly the activities concerning the organization of the European Football Championships EURO 2012. The authors indicated problems concerning the hotels real estate management, which belong to the wide group of commercial real estate. It was also presented the new outlook on the management of commercial real estate that consists in extension of the scope of interest of real estate with taking into account satisfaction increase of their users.
Źródło:
Budownictwo i Inżynieria Środowiska; 2011, 2, 4; 469-474
2081-3279
Pojawia się w:
Budownictwo i Inżynieria Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identyfikacja procesów zarządzania w przedsiębiorstwie budowlanym
Identification of management processes in a construction firm
Autorzy:
Hoła, B.
Gawron, K.
Polak, A.
Sawicki, M.
Powiązania:
https://bibliotekanauki.pl/articles/163321.pdf
Data publikacji:
2012
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
budownictwo
proces budowlany
zarządzanie procesowe
identyfikacja procesu
building industry
construction process
process management
process identification
Opis:
W artykule przedstawiono wyniki badań, których celem była identyfikacja procesów realizowanych w różnych obszarach zarządzania w przedsiębiorstwie budowlanym. Wnioski z badań będą wykorzystane podczas budowy systemu informatycznego wspomagającego zarządzanie opartego na podejściu procesowym.
This article presents the results of research which aimed to identify the processes taking place in various areas of management in a construction firm. The conclusions from the research will be applied in the building of a computerized management support system using a process-based approach.
Źródło:
Przegląd Budowlany; 2012, R. 83, nr 10, 10; 52-55
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Glass surface as potential in vitro substratum for Candida famata biofilm
Autorzy:
Malm, A
Chudzik, B.
Piersiak, T.
Gawron, A.
Powiązania:
https://bibliotekanauki.pl/articles/51150.pdf
Data publikacji:
2010
Wydawca:
Instytut Medycyny Wsi
Tematy:
microorganism
artificial habitat
glass surface
biofilm
Candida famata
confocal laser scanning microscopy
thickness
Źródło:
Annals of Agricultural and Environmental Medicine; 2010, 17, 1; 115-118
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identyfikacja procesów zarządzania w przedsiębiorstwie budowlanym
Identification of management processes in a construction firm
Autorzy:
Hoła, B.
Gawron, K.
Polak, A.
Sawicki, M.
Powiązania:
https://bibliotekanauki.pl/articles/160607.pdf
Data publikacji:
2012
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
przedsiębiorstwo budowlane
struktura
zarządzanie przedsiębiorstwem
construction enterprise
structure
enteenterprise management
managemant process
Opis:
Przedsiębiorstwo budowlane jest złożonym systemem dynamicznym składającym się z kilku lub kilkunastu powiązanych ze sobą podsystemów. Wyróżnić w nim można między innymi podsystem: produkcyjny, finansowy, planistyczny, logistyczny, jakości itp. W artykule przedstawiono wyniki badań, których celem była identyfikacja procesów realizowanych w różnych obszarach zarządzania w przedsiębiorstwie budowlanym. Wnioski z badań będą wykorzystane podczas budowy systemu informatycznego wspomagającego zarządzanie opartego na podejściu procesowym, które obecnie należy do najbardziej popularnych trendów w zarządzaniu.
A construction firm is a complex dynamic system consisting of several or more interconnected subsystems, including subsystems for production, finance, planning, logistics, quality and so on. This article presents the results of research which aimed to identify the processes occurring in various areas of management in a construction firm. The conclusions from the research will be used in the building of a computer system for management support using a process-based approach, this being among the most popular current trends in management.
Źródło:
Przegląd Budowlany; 2012, R. 83, nr 7-8, 7-8; 59-62
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ kwasów organicznych na fitotoksyczność oraz akumulację kadmu przez rośliny słonecznika
The impact of organic acids on the phytotoxicity and accumulation of cadmium by sunflower plants
Autorzy:
Hawrylak-Nowak, B.
Matraszek-Gawron, R.
Rubinowska, K.
Michałek, S.
Powiązania:
https://bibliotekanauki.pl/articles/7402639.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Tematy:
zanieczyszczenia gleb
metale ciezkie
kadm
fitotoksycznosc
gleby skazone
dodatki do gleb
kwasy organiczne
kwas cytrynowy
kwas szczawiowy
doswiadczenia wazonowe
rosliny oleiste
slonecznik
Helianthus annuus
pobieranie pierwiastkow
pobranie kadmu
translokacja pierwiastkow
akumulacja kadmu
Źródło:
Annales Horticulturae; 2017, 27, 3; 47-55
2544-4484
Pojawia się w:
Annales Horticulturae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kształtowanie zróżnicowanej struktury drzewostanów w warunkach nizinnych
Promoting diverse forest stand structure under lowland conditions
Autorzy:
Brzeziecki, B.
Drozdowski, S.
Bielak, K.
Buraczyk, W.
Gawron, L.
Powiązania:
https://bibliotekanauki.pl/articles/994357.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Leśne
Tematy:
lesnictwo
Puszcza Bialowieska
drzewostany
struktura drzewostanu
struktura warstwowa
struktura gatunkowa
ksztaltowanie struktury
postepowanie hodowlane
struktura grubosci
rozklad piersnic
metoda BDq
białowieża forest
close−to−nature silviculture
stand structure
silvicultural planning
stocking control
Opis:
The paper presents preliminary results and experiences concerning promoting diverse structures in forest stands dominated by light demanding tree species, i.e. those that prevail under conditions of Polish lowlands. Data was collected in the ‘Control Unit Browsk 28C', established in 2002 in the managed part of the Białowieża Forest (eastern Poland) and surveyed again in 2011.
Źródło:
Sylwan; 2013, 157, 08; 597-606
0039-7660
Pojawia się w:
Sylwan
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Podejście procesowe do zarządzania w budownictwie
Process approach to management in construction industry
Autorzy:
Hoła, B.
Polak, A.
Gawron, K.
Sawicki, M.
Morka, M.
Powiązania:
https://bibliotekanauki.pl/articles/1395624.pdf
Data publikacji:
2013
Wydawca:
Akademia Wojsk Lądowych imienia generała Tadeusza Kościuszki
Tematy:
budownictwo
przedsiębiorstwo budowlane
zarządzanie przedsiębiorstwem
podejście procesowe
modele procesów
construction industry
construction company
company management
process approach
models of processes
Opis:
W pracy zaprezentowano metodykę zapisu i oceny procesów realizowanych w przedsiębiorstwie budowlanym. Podstawą opracowania metodyki jest podejście procesowe propagowane przez normy ISO. Procesy występujące w każdym przedsiębiorstwie są powiązane wzajemnymi oddziaływaniami i powinny być stale identyfikowane i udoskonalane. Celem wprowadzania podejścia procesowego jest poprawa skuteczności działania przedsiębiorstwa w osiąganiu zamierzonych wyników. W pracy przedstawiono zidentyfikowane, na podstawie badań ankietowych, procesy realizowane w branży budowlanej. Opracowano prosty ale nowatorski sposób prezentowana przebiegu procesu, który umożliwia filtrowanie bazy procesów i operacji oraz uzyskiwanie informacji wykorzystywanych w ocenie i zarządzaniu przedsiębiorstwem.
The paper presents partial results of the model of knowledge management system built on the basis of the process approach designed for construction companies. The process approach is defined in the management system application processes. These processes and related interactions are constantly identified and improved. The aim of implementing the process approach is to improve the performance of the company in achieving the intended results. The paper presents the processes in the construction industry that were identified on the basis of a survey. A simple but innovative way of presenting the process flow was developed. It allows one to filter the database of processes and operations, and to obtain the information used in the assessment and management of the company.
Źródło:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki; 2013, 1; 132-141
1731-8157
Pojawia się w:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies