Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Gawlikowski, M." wg kryterium: Autor


Tytuł:
New design of patient-specific, antimicrobial bioactive finger implants for durable functional reconstruction after amputation
Autorzy:
Dyner, Marcin
Byrski, Adam
Major, Roman
Gawlikowski, Maciej
Kasperkiewicz, Katarzyna
Lackner, Juergen M.
Dyner, Aneta
Major, Bogusław
Powiązania:
https://bibliotekanauki.pl/articles/2058387.pdf
Data publikacji:
2021
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
finger implant
thin coatings
microstructure
cytotoxicity
microbiology
implanty
palce
cytotoksyczność
mikrobiologia
Opis:
The absence of even a single finger results in a major impairment in the hand function (precise grasping, grip power), therefore significantly affecting the social and professional life of victims who are frequently young people. Finger amputation is a surgical treatment for ~69.000 patients in the EU after traumatic injury, in which replantation microsurgery fails due to the severity of tissue damage. The surgical reconstruction is currently possible only via autograft transplantation, e.g. a toe-to-hand transfer, thus leading to foot impairment. Some motion functional restoration is also possible using a bone-anchored silicone prosthesis but without the sense revalidation. Our current research focuses on alternatives for surgical reconstruction by means of novel patient- -specific, durable, biomimetic, bioactive and antibacterial implants for reconstructing lost bone and joints. The implant design – and the improved micro(neuro) surgery (beyond the project) – will consist in the fast successful rehabilitation, including the soft-tissue related mobility, the implantation of state-of-the-art nerve conduits as well as the aesthetic appearance. Key issues for the long-term functionality of the biomaterial-based reconstruction of hard tissue are based on surgical demands, such as: (1) perfect integration of a bone-substituting metal with the surrounding bone tissue (a) with no signs of loosening due to stress shielding at the interface and (b) enhanced with protective activity against bacterial inflammation (antimicrobial properties and formation of vascularized bone tissue (ossification)) even months to years after the injury; (2) biomimetic finger joints based on non-wearing materials without ossification meant to prevent the loss of the motion function.
Źródło:
Engineering of Biomaterials; 2021, 24, 161; 8--14
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Photosensitive polymeric materials dedicated to lightweight heart pump rotor design
Autorzy:
Major, Roman
Gawlikowski, Maciej
Kurtyka, Przemysław
Kustosz, Roman
Lackner, Juergen M.
Powiązania:
https://bibliotekanauki.pl/articles/1844809.pdf
Data publikacji:
2021
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Źródło:
Engineering of Biomaterials; 2021, 24, 163; 28
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Initial biocompatibility assessment of ceramic material intended for application in implantable heart assist device
Autorzy:
Janiczak, K.
Zawidlak-Węgrzyńska, B.
Gawlikowski, M.
Gonsior, M.
Kustosz, R.
Powiązania:
https://bibliotekanauki.pl/articles/284808.pdf
Data publikacji:
2017
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
biomaterials
ceramic materials
implantation
Źródło:
Engineering of Biomaterials; 2017, 20, no. 143 spec. iss.; 67
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polyurethane filtration as an effective method of material cleanliness improvement for implant applications
Autorzy:
Zawidlak-Węgrzyńska, B.
Gonsior, M.
Gawlikowski, M.
Kustosz, R.
Jarosz, A.
Lewczuk, M.
Czerwiński, L.
Powiązania:
https://bibliotekanauki.pl/articles/283917.pdf
Data publikacji:
2017
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
implants
biomaterials
filtration process
Źródło:
Engineering of Biomaterials; 2017, 20, no. 143 spec. iss.; 66
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ti6Al7Nb alloy surface improvement for implantable blood pumps applications
Autorzy:
Gonsior, M.
Tarnowski, M.
Janiczak, K.
Zawidlak-Węgrzyńska, B.
Wierzchoń, T
Gawlikowski, M.
Kustosz, R.
Powiązania:
https://bibliotekanauki.pl/articles/286034.pdf
Data publikacji:
2017
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
Ti6Al7Nb alloys
blood pump
implantation
Źródło:
Engineering of Biomaterials; 2017, 20, no. 143 spec. iss.; 65
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Athrombogenic diffusive TiN surface layers aplication and evaluation in polish implantable rotary continous flow blood pump
Autorzy:
Gonsior, M.
Kustosz, R.
Gawlikowski, M.
Darlak, M.
Altyntsev, I.
Głowacki, M.
Wierzchoń, T.
Powiązania:
https://bibliotekanauki.pl/articles/284351.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
flow blood pump
surface layers
TiN layers
Źródło:
Engineering of Biomaterials; 2016, 19, 138; 100
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biocompatibility normative investigation of new co-polymer intended for manufacturing of ventricular assist devices
Autorzy:
Gawlikowski, M.
Zawidlak-Węgrzyńska, B.
Ciesla, P.
Janiczak, K.
Kustosz, R.
Gonsior, M.
Frey, M. el
Powiązania:
https://bibliotekanauki.pl/articles/285928.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
polymers
ventricular assist devices
biocompatibility
Źródło:
Engineering of Biomaterials; 2016, 19, 138; 76
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected in-vitro study of bionanocellulose toward its utilization in medical devices contacting with blood
Autorzy:
Gawlikowski, M.
Janiczak, K.
Zawidlak-Węgrzyńska, B.
Kustosz, R.
Gonsior, M.
Siondalski, P.
Powiązania:
https://bibliotekanauki.pl/articles/284185.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
bionanocellulose
biomaterials
in vitro study
Źródło:
Engineering of Biomaterials; 2016, 19, 138; 77
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Digital image correlation of coated and uncoated Religa Heart_Ext ventricular assist device
Autorzy:
Kopernik, M.
Gawlikowski, M.
Milenin, A.
Altyntsev, I.
Kustosz, R.
Kąc, S.
Powiązania:
https://bibliotekanauki.pl/articles/307138.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
komorowe wspomaganie pracy serca
VAD
korelacja obrazów
DIC
azotek tytanu
Tin
złoto
ventricular assist device
digital image correlation
titanium nitride
TiN
gold
Opis:
The digital image correlation is used to estimate influence of deposited heamocompatible coatings (gold and titanium nitride) on mechanical response of ventricular assist device Religa Heart_Ext made of Bionate II (thermoplastic polycarbonate urethane) under working conditions by comparison of the coated Religa Heart_Ext with uncoated Religa Heart_Ext. The DIC is applied for experimental investigation of the strains and displacements distribution on external surface of the blood chamber of ventricular assist device during loading. The experiment was conducted in a hydraulic system with water at operating temperatures of 25 and 37 °C, as well as under static pressures: 80, 120, 180, 220 and 280 mmHg, and static underpressures: –25, –45, –75 mmHg. The subsequent images were taken after stabilization of pressure on a set level. The applied research method shows that the nano-coating of 30 nm in thickness significantly affects deformation of the blood chamber of Religa Heart_Ext in macro scale. The proposed composition of coatings increases strain on external surface of the ventricular assist device.
Źródło:
Acta of Bioengineering and Biomechanics; 2015, 17, 4; 49-58
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Tin Coatings Utilisation As Blood Contact Surface Modification In Implantable Rotary Left Ventricle Assist Device ReligaHeart Rot
Wykorzystanie powłok TiN jako zmodyfikowanych powierzchni kontaktowych w implantowalnej rotacyjnej komorze wspomagania serca ReligaHeart ROT
Autorzy:
Kustosz, R.
Altyntsev, I.
Darlak, M.
Wierzchoń, T.
Tarnowski, M.
Gawlikowski, M.
Gonsior, M.
Kościelniak-Ziemniak, M.
Powiązania:
https://bibliotekanauki.pl/articles/355709.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
titanium nitride layers
athrombogenic coatings
implantable rotary pump
heart assistance
warstwy azotku tytanu
zakrzepy
wszczepialna pompa rotacyjna
serce
Opis:
Constructions of the mechanical-bearingless centrifugal blood pumps utilize different types of non-contact physical bearings, which allows to balance the forces that have an impact on the pump impeller, stabilizing its position in the pump house without wall contact. The paper presents investigations of the hybrid (passive magnetic bearings and hydrodynamic bearings) suspension system for the centrifugal blood pump. Numerical simulations were used to evaluate the hydrodynamic bearing lifting force and magnetic bearing forces interaction. An important aspect of rotor suspension system design was the nominal gap in hydrodynamic bearing area in order to reduce the blood damage risk in this region. The analyses results confirmed that for a small diameter centrifugal pump, the nominal operating hydrodynamic bearing gap could be established within the range from 0.033 to 0.072 mm.
Konstrukcje pomp odśrodkowych pozbawionych łożysk mechanicznych wykorzystują różne rodzaje bezkontaktowych łożysk fizycznych, które pozwalają balansować siły oddziałujące na wirnik pompy, stabilizując jego pozycję w obudowie pompy bez kontaktu ze ścianami. Artykuł przedstawia badania hybrydowego (pasywne łożyska magnetyczne i łożyska hydrodynamiczne) systemu zawieszenia wirnika dla odśrodkowej pompy krwi. Symulacji numerycznych użyto dla zbadania siły unoszącej łożyska hydrodynamicznego oraz reakcji łożysk magnetycznych. Ważnym aspektem konstrukcji systemu zawieszenia wirnika było zwiększenie nominalnego prześwitu w obszarze łożyska hydrodynamicznego, aby zredukować ryzyko uszkadzania krwi w tym rejonie. Wyniki analiz potwierdziły możliwość wyznaczenia nominalnego prześwitu w łożysku hydrodynamicznym, dla pomp odśrodkowych małej średnicy, w przedziale od 0,033 do 0,072 mm.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 3; 2253-2260
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Acoustic System of Determining the Instantaneous Volume of the Blood Part of the Ventricular Assist Device POLVAD-EXT
Autorzy:
Konieczny, G.
Pustelny, T.
Opilski, Z.
Gawlikowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/176599.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
acoustic Helmholtz’s
resonator
blood volume estimation
VAD
ventricular assist device
Opis:
The paper presents the results of investigations concerning the noninvasive method of estimating the actual volume of the blood chamber of the POLVAD-EXT type ventricular assist device (VAD) during its operation. The proposed method is based on the principle of Helmholtz’s acoustic resonance. Both the theory, main stages of the development of the measurement method as well as the practical implementation of the proposed method in the physical model of the POLVAD-EXT device are dealt with. The paper contains the results of static measurements by means of the proposed method (conducted at the Department of Optoelectronics, Silesian University of Technology) as well as the dynamic measurements taken at the Foundation of Cardiac Surgery Development (Zabrze, Poland) with the professional model of the human cardiovascular system. The results of these measurements prove that the proposed method allows to estimate the actual blood chamber volume with uncertainties below 10%.
Źródło:
Archives of Acoustics; 2014, 39, 4; 541-548
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Materiały polimerowe i węglowe w aspekcie zastosowania jako materiał konstrukcyjny dysku polskiej mechanicznej zastawki serca - ocena wybranych własności fizycznych i biologicznych
Polymeric and carbon materials applied in the construction of Polish mechanical valve disk - evaluation of selected physical and biological properties
Autorzy:
Szuber, A.
Kościelniak-Ziemniak, M.
Janiczak, K.
Głowacki, M.
Gawlikowski, M.
Kustosz, R.
Gonsior, M.
Wilczek, P.
Duber, S.
Kaczorowski, W.
Niedzielski, P.
Grabarczyk, J.
Walke, W.
Powiązania:
https://bibliotekanauki.pl/articles/284095.pdf
Data publikacji:
2013
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
dysk mechanicznej zastawki serca
biomateriały
biozgodność
mechaniczne wspomaganie serca
mechanical heart valve disc
biomaterials
biocompatibility
mechanical heart support
Opis:
Badania biomateriałów polimerowych i węglowych prowadzone są w celu doboru odpowiednich materiałów konstrukcyjnych dla polskiej dyskowej mechanicznej zastawki serca typu Moll. W obszarze zainteresowania znalazły się: polieteroeteroketon (PEEK), PEEK utwardzony powierzchniowo warstwą węglową typu DLC oraz węgiel szklisty. Biomateriały zostały poddane wybranym badaniom strukturalnym (badaniom mikrotwardości metodą Vickersa i porowatości z wykorzystaniem analizatora Autosorb iQ) oraz badaniom własności mechanicznych na stanowisku badań zmęczeniowych. Własności biozgodne biomateriałów oceniono wykorzystując nowoczesną metodę badań biologicznych biomateriałów - badania trombogenności powierzchni wykonano na urządzeniu Impact-R, w testach dynamicznego kontaktu z krwią w warunkach oddziaływania sił ścinających. Wyniki badań zmęczeniowych i oceny trombogenności materiałów polimerowych potwierdziły właściwe zastosowanie materiału PEEK w konstrukcji dysku zastawki mechanicznej przeznaczonej do stosowania krótkoterminowego (około 12 miesięcy) wpozaustrojowej pulsacyjnej pompie mechanicznego wspomagania serca. Zastosowanie utwardzającej powłoki węglowej typu DLC na polimerze stanowi właściwy kierunek prac mających na celu uzyskanie bardziej wytrzymałej powierzchni dysku w kontakcie z tytanowym pierścieniem zastawek, co potwierdziły testy zmęczeniowe. Przeprowadzone badania mikrotwardości biomateriałów wskazały wysoką wytrzymałość oraz twardość opracowywanego węgla szklistego.
The polymeric and carbon biomaterials tests are performed in order to select the proper constructional materials for Polish mechanical tilting valve type Moll. In the area of interests are: polyetheretherketone (PEEK), PEEK with a DLC (diamond like carbon) surface layer and glassy carbon. The biomaterials were analyzed in selected structural tests (micro hardness tests utilizing Vickers method and porosity tests utilizing Autosorb iQ analyzer) and mechanical properties investigation on the fatigue test stand. Biocompatibility properties of biomaterials were evaluated utilizing new biological investigation method - biomaterial surface thrombogenicity test performed using Impact-R device, in the dynamic blood contact conditions with shear stress impact. The results of fatigue and thrombogenicity tests of polymeric materials confirmed the proper PEEK use in the mechanical valve disk construction dedicated for short term application (approximately 12 months) in the extracorporeal pulsatile ventricular heart assists device. The hardened carbon type DLC surface layer on the polymer is the appropriate direction of investigation in order to obtain more durable disk surface in the contact with titanium valve housing, what was confirmed in fatigue tests. The micro hardness biomaterials tests showed high strength and hardness of investigated glassy carbon.
Źródło:
Engineering of Biomaterials; 2013, 16, 121; 25-32
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Application of Ultrasonic Methods to Flow Measurement and Detection of Microembolus in Heart Prostheses
Autorzy:
Gawlikowski, M.
Lewandowski, M.
Nowicki, A.
Kustosz, R.
Walczak, M.
Karwat, P.
Karłowicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/1399342.pdf
Data publikacji:
2013-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
43.35.Yb
43.80.Qf
43.35.Ae
Opis:
For the last 20 years the world cardiosurgery has presented a considerable change of attitude to mechanical circulatory support. In spite of technological progress the main problems in ventricular assist devices are: thrombosis and low accuracy of flow measurements. In this paper the prototype of multi-gate Doppler flowmeter intended for cardiac assist system ReligaHeart EXT has been presented as well as the possibility of ultrasonic microembolus detection.
Źródło:
Acta Physica Polonica A; 2013, 124, 3; 417-420
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of actual accuracy in cardiac output measurements by means of thermodilution
Autorzy:
Gawlikowski, M.
Pustelny, T.
Powiązania:
https://bibliotekanauki.pl/articles/201601.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cardiac output
hemodynamics monitoring
thermodilution
Opis:
The essential examination in hemodynamic monitoring of the patient is the cardiac output (CO) measurement. Nowadays, in clinical practice the most popular method is indicator dilution, particularly thermodilution. It is realized by applying the Swan-Ganz catheter and observing changes of the indicator concentration. This method is sensitive to many factors and the obtained results should be treated cautiously. The paper presents theoretical and experimental studies of metrological phenomena in CO measurements by means of thermodilution, paying special attention to medical aspects of the measurements. It has been pointed out that the actual unreliability of the mentioned method reaches values from 20% to 45%, which is in opposition to the technical data of patient's monitors (typical accuracy about 5%).
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2012, 60, 3; 581-587
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Enhanced External Counterpulsation in Patients with Advanced Ischemic Cardiomyopathy
Autorzy:
Przywara-Chowaniec, B.
Gawlikowski, M.
Kuczaj, A.
Bachorz, M.
Czechowski, P.
Kowalski, P.
Geodecki, M.
Kawecki, D.
Barańska, K.
Paluch, M.
Pluszczyk, M.
Opara, M.
Puzio, A.
Nowalany-Kozielska, E.
Powiązania:
https://bibliotekanauki.pl/articles/1418031.pdf
Data publikacji:
2012-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
47.63.Ec
82.60.Fa
Opis:
A significant increase in the number of patients with heart failure of varied etiology has been observed in the recent years. Apart from pharmacological and surgical therapies, new, non-invasive assistance methods of cardiovascular system are still sought. One of them is external counterpulsation. Within this study, effectiveness of such a form of therapy has been examined in a group of 10 patients with an ischemic left ventricular systolic dysfunction. It has been shown that external counterpulsation has a beneficial influence onto the result of a six-minute walk test and causes a slight decrease in the creatinine concentration in the patients undergoing the tests.
Źródło:
Acta Physica Polonica A; 2012, 122, 5; 866-869
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies