Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Gao, Chen" wg kryterium: Autor


Tytuł:
Vertex-Distinguishing IE-Total Colorings of Complete Bipartite Graphs Km,N(m < n)
Autorzy:
Chen, Xiang’en
Gao, Yuping
Yao, Bing
Powiązania:
https://bibliotekanauki.pl/articles/30146641.pdf
Data publikacji:
2013-05-01
Wydawca:
Uniwersytet Zielonogórski. Wydział Matematyki, Informatyki i Ekonometrii
Tematy:
complete bipartite graphs
IE-total coloring
vertex-distinguishing IE-total coloring
vertex-distinguishing IE-total chromatic number
Opis:
Let G be a simple graph. An IE-total coloring f of G is a coloring of the vertices and edges of G so that no two adjacent vertices receive the same color. Let C(u) be the set of colors of vertex u and edges incident to u under f. For an IE-total coloring f of G using k colors, if C(u) ≠ C(v) for any two different vertices u and v of G, then f is called a k-vertex-distinguishing IE-total-coloring of G, or a k-VDIET coloring of G for short. The minimum number of colors required for a VDIET coloring of G is denoted by χievt(G), and is called vertex-distinguishing IE-total chromatic number or the VDIET chromatic number of G for short. VDIET colorings of complete bipartite graphs Km,n(m < n) are discussed in this paper. Particularly, the VDIET chromatic numbers of Km,n(1 ≤ m ≤ 7, m < n) as well as complete graphs Kn are obtained.
Źródło:
Discussiones Mathematicae Graph Theory; 2013, 33, 2; 289-306
2083-5892
Pojawia się w:
Discussiones Mathematicae Graph Theory
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Two Gln187 mutants of human soluble APRIL inhibit proliferation of lung carcinoma A549 cells
Autorzy:
Dai, Shuangshuang
Zheng, Yingru
Chen, Bin
Gao, Min
Zhang, Yan
Zhang, Li
Gong, Wei
He, Fengtain
Powiązania:
https://bibliotekanauki.pl/articles/1040492.pdf
Data publikacji:
2009
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
APRIL
Gln187 mutant of sAPRIL
anti-tumor activity
Opis:
Soluble APRIL (sAPRIL), the active form of a proliferation-inducing ligand (APRIL), is implicated in the proliferation of tumor cells. Suppressing APRIL function has been considered as a potential strategy for the therapy of APRIL-associated tumors. In the present study, we generated human sAPRIL and its two mutants, Gln187-D-sAPRIL (Gln187 deleted) and Gly187-sAPRIL (Gln187 replaced by Gly). In vitro experiments showed that the two mutants had similar specific binding capacity to lung carcinoma A549 cells compared to the wild-type sAPRIL, and both, especially Gly187-sAPRIL, exhibited significant antagonistic effect on sAPRIL-induced tumor cell proliferation in a dose-dependent manner, which might be predominantly mediated by blocking sAPRIL-induced MEK and ERK phosphorylation but not p38MAPK or JNK signaling. In vivo experiments with nude mice bearing A549 cell-derived xenograft tumor showed that only the Gly187-sAPRIL mutant could significantly suppress the tumor growth. These results suggest that Gln187 may be a crucial amino acid in APRIL-mediated tumor cell proliferation via the MEK-ERK signaling pathway and that the sAPRIL mutants may serve as novel potential antagonists of APRIL for the therapy of APRIL-associated cancers.
Źródło:
Acta Biochimica Polonica; 2009, 56, 4; 703-710
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tool wear condition monitoring in milling process based on data fusion enhanced long short-term memory network under different cutting conditions
Autorzy:
Zheng, Guoxiao
Sun, Weifang
Zhang, Hao
Zhou, Yuqing
Gao, Chen
Powiązania:
https://bibliotekanauki.pl/articles/2038054.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
tool wear condition monitoring
empirical mode decomposition
variational mode decomposition
fourier synchro squeezed transform
neighborhood component analysis
long short-term memory network
Opis:
Tool wear condition monitoring (TCM) is essential for milling process to ensure the machining quality, and the long short-term memory network (LSTM) is a good choice for predicting tool wear value. However, the robustness of LSTM- based method is poor when cutting condition changes. A novel method based on data fusion enhanced LSTM is proposed to estimate tool wear value under different cutting conditions. Firstly, vibration time series signal collected from milling process are transformed to feature space through empirical mode decomposition, variational mode decomposition and fourier synchro squeezed transform. And then few feature series are selected by neighborhood component analysis to reduce dimension of the signal features. Finally, these selected feature series are input to train the bidirectional LSTM network and estimate tool wear value. Applications of the proposed method to milling TCM experiments demonstrate it outperforms significantly SVR- based and RNN- based methods under different cutting conditions.
Źródło:
Eksploatacja i Niezawodność; 2021, 23, 4; 612-618
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The selective depression effect of sodium hexametaphosphate on the separation of chlorite and specularite
Autorzy:
Zhao, Fugang
Yu, Xiankun
Gao, Xiangpeng
Li, Mingyang
Chen, Xiangxiang
Powiązania:
https://bibliotekanauki.pl/articles/24085963.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation
depressant
chlorite
specularite
adsorption
Opis:
Flotation is the most known beneficiation method for the separation of complex and refractory iron ores. As a typical iron-containing silicates, it is difficult to separate chlorite from specularite, because of the similar surface physicochemical properties. In this study, the selective depression effect of sodium hexametaphosphate (SHMP) was conducted via the cationic micro-flotation. The surface adsorption mechanism between SHMP and the two mineral surface was explored through surface adsorption amount tests, Zeta-potential measurements, Fourier transform infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS) analyses. The micro-flotation results indicated that SHMP could selectively depress around 90% of chlorite, while its effect on the floatability of specularite was negligible (<20% depressing). The surface adsorption amount tests, Zeta-potential measurements analysis demonstrated that SHMP selectively adsorb on chlorite surface while on the surface of specularite is feeble. The further surface adsorption analysis via FT-IR and XPS proved that SHMP selective adsorption occurred on the chlorite surface mainly by chemisorption mainly through the chelation reaction between O in the phosphate groups of SHMP molecular and metal ions on surface of chlorite.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 2; art. no. 166495
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Preparation of Soluble Cellouronic Acid Sodium Salt by 4-Acetamide-TEMPO Mediated Oxidation of Ultrasound-Pretreated Parenchyma Cellulose from Bagasse Pith
Autorzy:
Gao, X.
Chen, K.
Zhang, H.
Peng, L.
Powiązania:
https://bibliotekanauki.pl/articles/177150.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ultrasonic pretreatment
bagasse pith
parenchyma cellulose
cellouronic acid sodium salt
4-acetamide-TEMPO
Opis:
The parenchyma cellulose isolated from bagasse pith was used as an alternative resource for preparation of water-soluble cellouronic acid sodium salt (CAS). The influence of ultrasound treatment on the cellulose was investigated for obtaining CAS by regioselective oxidization using 4-acetamide-TEMPO and NaClO with NaClO2 as a primary oxidant in an aqueous buffer at pH 6.0. The yield, carboxylate content and polymerization degree (DP) of CAS were measured as a function of ultrasonic power, agitating time and cellulose consistency by an orthogonal test. The ultrasound-treated conditions were further improved by discussion of ultrasonic power, the most important factor influencing the yield and DP. An optimized CAS yield of 72.9% with DP value (DPv) of 212 was found when the ultrasonic strength is 550 W, agitating time is 3 h and cellulose consistency is 2.0%. The oxidation reactivity of cellulose was improved by ultrasonic irradiation, whereas no significant changes in crystallinity of cellulose were measured after ultrasonic treatment. Moreover, the ultrasound treatment has a greater effect on yielding CAS from parenchyma cellulose than from bagasse fibrous’ one. The CAS was further characterized by Fourier transform infrared spectroscopy (FT-IR) and Scanning electron microscopy (SEM).
Źródło:
Archives of Acoustics; 2014, 39, 2; 267-275
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tensile-tensile Fatigue Behavior of Multi-axial Warp-knitted Reinforced Composite
Ocena właściwości mechanicznych i zmęczeniowych kompozytowych dzianin wieloosiowych
Autorzy:
Gao, X.
Tao, N.
Chen, S.
Wang, L.
Wu, W.
Powiązania:
https://bibliotekanauki.pl/articles/232142.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
multi-axial warp-knitted fabric composite
fatigue behavior
S-N curve
equivalent residual strength
kompozytowe dzianiny wieloosiowe
zmęczenie materiału
krzywa S-N
równoważna wytrzymałość resztkowa
Opis:
An experimental study was carried out on the fatigue behaviour of multi-axial warp-knitted fabric composites. Composite samples reinforced with multi-axial warp-knitted fabric/matrix were manufactured by the vacuum-assisted resin transfer moulding method. Tensile-tensile fatigue cycling was carried out at different load levels, and S-N curves, tensile stress-strain curve and stiffness degradation of the multi-axial composite samples were obtained. Finally post-fatigue tensile tests were done at a stress level of 75%, at the stages of 1/3N and 2/3N, and the equivalent residual strength and stiffness degradation were obtained.
Dokonano oceny właściwości mechanicznych i zmęczeniowych kompozytowych dzianin wieloosiowych. Kompozyty wzmocnione dzianiną wieloosiową wytworzono przy zastosowaniu próżniowej metody formowania. Dokonano oceny zmęczenia materiału i właściwości wytrzymałościowych przy różnych poziomach obciążenia. Przedstawiono krzywe S-N, krzywą naprężenie-odkształcenie i degradację sztywności wieloosiowych próbek kompozytowych. Wykonano również testy zmęczenia materiału przy poziomie naprężenia 75%, w etapach 1/3N i 2/3N. Omówiono równoważną wytrzymałość szczątkową i degradację sztywności kompozytowych dzianin wieloosiowych.
Źródło:
Fibres & Textiles in Eastern Europe; 2018, 1 (127); 73-80
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis of nanoscale zero-valent iron doped carbonized zeolitic imidazolate framework-8 for methylene blue removal in water
Autorzy:
Chen, Shuai
Qiao, Lemeng
Feng, Xuejiao
Huang, Yufu
Gao, Guilan
Guan, Jie
Lin, Donghai
Powiązania:
https://bibliotekanauki.pl/articles/2204144.pdf
Data publikacji:
2023
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Nanoscale zero-valent iron
Carbonized zeolitic imidazolate framework-8
Mesoporous carbon
Methylene blue
Opis:
Nanoscale zero-valent iron-doped carbonized zeolitic imidazolate framework-8 (nZVI/CZIF-8) was prepared by carbonation of ferric nitrate and ZIF-8 at 800 °C and used as an adsorbent to remove methylene blue (MB) from water. The synthesized nZVI/CZIF-8 has a specific surface area of 806.9 m2/g, a pore volume of 0.86 cm3/g and an nZVI content of 1.35%, respectively. Both the nZVI/CZIF-8 and CZIF-8 have identical functional groups of O-H, C-H and C=C. With the increase of CZIF-8 size, MB removal rate increased. The doping of nZVI increased the MB removal percentage from 74.5% for ZIF-8 to 96.2% within 80 min for nZVI/CZIF-8. The MB removal percentage increased with the dosage of nZVI/CZIF-8. The MB adsorption with the adsorbents conforms to the Freundlich adsorption isothermal model and the removal rate fitted well to a pseudo-first-order model. The results demonstrate the feasibility of synthesizing high active and stable nZVI/CZIF-8 particles.
Źródło:
Polish Journal of Chemical Technology; 2023, 25, 1; 12--19
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on the mechanism and kinetics of sulfuric acid leaching scandium from rich scandium anatase
Autorzy:
He, Fei
Gao, Likun
Chen, Long
Rao, Bing
Shen, Hairong
Peng, Kebo
Gao, Guangyan
Powiązania:
https://bibliotekanauki.pl/articles/2146896.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
anatase ore
sulfuric acid
leaching
kinetics
scandium
Opis:
Scandium and its compounds have excellent properties, and are widely used in cutting-edge fields such as optics, electronics, and alloys. Thus, scandium is an important strategic metal. However, scandium is extremely sparsely distributed in the earth's crust, rarely occurs as an independent mineral, and requires a complex recovery process. Therefore, the study of the extraction of scandium is of great practical significance. This study examined the leaching test and kinetics of scandium under the acid leaching system of refractory anatase ore. Under appropriate two-stage countercurrent leaching conditions, the first stage of the particle size of fraction of -0.074 mm 82.6%, initial H2SO4 concentration of 6 mol/L, leaching temperature of 100 °C, acid/solid ratio of 3 ml/g, stirring speed of 300 rpm, and leaching time of 50 min; and the second stage of the initial H2SO4 concentration of 11 mol/L, leaching temperature of 150 °C, acid/solid ratio of 4 ml/g, stirring speed of 300 rpm, and leaching time of 50 min, a scandium leaching rate of 96.98% was achieved. The kinetics of scandium leaching conformed to a shrinking-core model, and sulfuric acid concentration and temperature were the most important parameters affecting the scandium leaching rate. The kinetic analysis of scandium leaching at different sulfuric acid concentrations showed that as the concentration increased, the sulfuric acid leaching of scandium changed from being chemical reaction-controlled to internal diffusion-controlled, and the apparent reaction order was 1.2429. The kinetics of scandium leaching at different temperatures showed that the sulfuric acid leaching of scandium was reaction-controlled and the apparent activation energy was 42.21 kJ-mol-1.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 3; art. no. 146171
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on Tensile Properties and Microstructures of Different Sites in Al-Si Alloy Casting Component
Autorzy:
Tao, Jianquan
Xiang, Lin
Chen, Xidong
Sun, Jipeng
Wang, Yanbin
Du, Chuanhang
Peng, Feifei
Gao, Shiqing
Chen, Qiang
Powiązania:
https://bibliotekanauki.pl/articles/27765052.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
ZL114A alloy
plaster-mold casting
tensile properties
microstructure
fracture
Opis:
The tensile properties and microstructures of ZL114A alloy component with a complex shape are investigated at room temperature and 200°C, using the tensile tests, scanning electron microscopy and electron backscattering diffraction. Both thin wall and thick structure exhibit excellent properties, of which max ultimate tensile strength and elongation at break reach 314 MPa and 2.5% at room temperature, respectively. The ultimate tensile strengths of thin wall are 40 MPa and 25 MPa greater than those of thick structure at room temperature and 200°C, respectively. Moreover, the eutectic Si phases of thin wall exhibit a predominantly spherical morphology while of the morphology of thick structure are rod-like, resulting in the different mechanical properties between thin wall and thick structure. The fracture morphologies of thin wall and thick structure are studied to explain the difference in performance between thin wall and thick structure.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 2; 585--589
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selective comminution and grinding mechanisms of spent carbon anode from aluminum electrolysis using ball and rod mills
Autorzy:
Ni, Chao
Zhou, Shaoqi
Gao, Jixuan
Bu, Xiangning
Chen, Yuran
Alheshibri, Muidh
Xie, Guangyuan
Li, Biao
Powiązania:
https://bibliotekanauki.pl/articles/2146907.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
selective comminution
ball mill
rod mill
spent carbon anode
grinding mechanizm
Opis:
The recovery of spent carbon anode (SCA) materials plays important roles in environment protection and resources recycling, while this cannot be efficiently achieved without liberation. In this study, grinding characteristics of spent carbon anode from aluminum electrolysis in both ball mill and rod mill were analyzed, and compared based on the utilization of the selective Fuerstenau upgrading curves. In addition, the different grinding mechanisms of ball and rod milling were evaluated by analyzing the shape factor and surface roughness of the ground samples. Results of mineralogical characterizations indicated that carbon particles (d50 = 46.86 μm) presented in the SCA were closely associated with cryolite particles. At 5 min grinding time, the maximum selective comminution factor (β) values of ball milling and rod milling were 2.00 and 1.63, respectively, indicating a higher degree of selective comminution of SCA was achieved from ball milling. Comparisons of the valuable component content (cv, cum) of -125 μm ground particles and the shape characterizations of 74–125 μm ground particles generated from ball and rod milling manifest that a direct relationship exists between the degree of selective comminution and the grinding mechanism.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 3; art. no. 145667
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research of Fluorinated Acrylate Copolymer on Flax Fabric
Badania wpływu emulsji kopolimeru akrylanowego zawierającej fluor na właściwości tkanin lnianych
Autorzy:
Sui, Z.
Yang, K.
Chen, J.
Zhao, X.
Gao, S.
Powiązania:
https://bibliotekanauki.pl/articles/234076.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
fluorine-containing acrylate
core-shell polymerisation
linen fabric
finishing agent
hydrophobicity
lipophobicity
fluor
akrylan
polimeryzacja rdzeń-otoczka
tkanina lniana
hydrofobowość
lipofobowość
Opis:
A fluorine-containing acrylate copolymer emulsion was prepared in this study, which was applied to finishing linen fabric. Dodecafluloroheptry methacrylate (G04) was used as a modified monomer, butylacrylate (BA) and methylacrylate (MMA) as soft and hard monomers.respectively, and acrylic acid as a functional monomer. Structure and properties of the products were characterised and analyzed by FTIR, TEM, PSD and CA measurements, respectively. The water and air permeability as well as the breaking force of the fabric treated were also investigated. The results showed that the fluorine-containing acrylate copolymer emulsion obtained had a core-shell structure, and the microsphere was of nanoscale size. Because of the latex film on the fabric surface, it became smooth and flat. And the increase in G04 was beneficial to the mechanical properties, waterproofness and antifouling ability of the linen fabric. When the content of G04 were increased from 0% to 20%, the water in the linen sample and hexadecane contact angles to the copolymer film increased from 113.02° to 136.08° and from 65.1° to 87.6°,respectively. Furthermore the breaking force of the linen samples was enhanced from 648 N to 721N. However, the increasing content of G04 had negative effects on the flexural rigidity as well as water and air permeability of the fabric, which were essential requirements for the fabric’s application. However, the wash resistance was excellent and the wear-resistance of the finished linen fabric was better than the unfinished linen fabric.
W pracy przygotowano emulsję kopolimeru akrylanowego zawierającą fluor, którą następnie zastosowano do wykańczania tkanin lnianych. Jako modyfikowany monomer zastosowano metakrylan dodekafluoroheptan (G04), a jako miękkie i twarde monomery użyto akrylan butylu (BA) i akrylan metylu (MMA), a kwas akrylowy jako monomer funkcjonalny. Strukturę i właściwości produktów scharakteryzowano i przeanalizowano za pomocą pomiarów FTIR, TEM, PSD i CA. Przebadano również przepuszczalność wody i powietrza oraz siłę zrywania tkaniny poddanej obróbce. Wyniki wykazały, że otrzymana fluorowa emulsja kopolimeru akrylanowego miała strukturę rdzeń-otoczka, a mikrosfera miała rozmiar w nanometrach. Ze lateksowej powłoce tkanina stała się gładka i matowa. Stwierdzono, że wzrost G04 wpływa korzystnie na właściwości mechaniczne, wodoodporność i zdolność przeciwporostową tkaniny lnianej. Zwiększenie zawartości G04 spowodowało wzrost kąta zwilżania, a siła zrywania próbek zwiększyła się z 648 do 721 N. Jednak wzrastająca zawartość G04 miała negatywny wpływ na sztywność zginania, a także przepuszczalność wody i powietrza tkaniny, które były zasadniczymi cechami wymaganymi dla aplikacji tkaniny. Jednakże odporność na pranie i zużycie była lepsza w przypadku próbek powleczonych.
Źródło:
Fibres & Textiles in Eastern Europe; 2017, 6 (126); 83-88
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recent progress, opportunities and challenges in collaborative learning and orchestrating creativity
Autorzy:
Chen, Junjie
Gao, Xuhui
Yan, Longfei
Xu, Deguang
Powiązania:
https://bibliotekanauki.pl/articles/1194013.pdf
Data publikacji:
2015
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Collaborative learning
Creativity
Orchestrating learning
Sociocultural approach
Teachers working methods
Opis:
The role of teacher is increasingly related to designing and arranging collaborative learning situations in which fruitful and creative group work may occur. This thematic review presents recent studies on creativity and collaborative learning from the perspective of the teacher as conductor of learning processes. The precondition for the design and orchestration of these kinds of learning situations is analyzing and understanding of creative and collaborative processes and their contextual adaption. Therefore, the first section of this review focuses on the theoretical vantage points of creativity and collaborative learning mainly from socio-cultural perspective. Based on this theoretical grounding, the second section describes principles for orchestrating productive collaborative learning and supporting creativity from the teacher’s perspective. We discuss three dimensions related to how teachers can bring about collaborative learning and creativity: general pedagogical bases, teachers’ pre- and real-time activities as well as opportunities and challenges for teacher activities. The review is concluded with theoretical and practical implications regarding collaborative learning and creativity.
Źródło:
World Scientific News; 2015, 9; 124-143
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recent progress in monoaromatic pollutants removal from groundwater through bioremediation
Autorzy:
Chen, J.
Gao, X.
Yan, L.
Xu, D.
Powiązania:
https://bibliotekanauki.pl/articles/11447.pdf
Data publikacji:
2015
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
monoaromatic pollutant
ground water
bioremediation
biodegradation
benzene
toluene
ethylbenzene
xylene
Opis:
Monoaromatic pollutants such as benzene, toluene, ethylbenzene and mixture of xylenes are now considered as widespread contaminants of groundwater. In situ bioremediation under natural attenuation or enhanced remediation has been successfully used for removal of organic pollutants, including monoaromatic compounds, from groundwater. Results published indicate that in some sites, intrinsic bioremediation can reduce the monoaromatic compounds content of contaminated water to reach standard levels of potable water. However, engineering bioremediation is faster and more efficient. Also, studies have shown that enhanced anaerobic bioremediation can be applied for many BTEX contaminated groundwaters, as it is simple, applicable and economical.This paper reviews microbiology and metabolism of monoaromatic biodegradation and in situ bioremediation for BTEX removal from groundwater under aerobic and anaerobic conditions. It also discusses the factors affecting and limiting bioremediation processes and interactions between monoaromatic pollutants and other compounds during the remediation processes.
Źródło:
International Letters of Natural Sciences; 2015, 07
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies