Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Filipkowska, Urszula" wg kryterium: Autor


Tytuł:
The influence of chitosan flake deacetylation degree on orthophosphate sorption efficiency from aqueous solutions
Autorzy:
Bugajska, Paula
Filipkowska, Urszula
Jóźwiak, Tomasz
Kuczajowska-Zadrożna, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/1034433.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
chitosan
deacetylation degree
orthophosphate
sorption
Opis:
The article presents the effectiveness of orthophosphate sorption from aqueous solutions depending on the deacetylation degree of chitosan flakes. The first stage of the research was to determine the pH value at which the sorption process was the most effective (from the pH range 2–11). In the second stage, research was carried out to determine the maximum sorption capacities of chitosan with deacetylation degrees of 75%, 85% and 90% in relation to PO43-. The highest effectiveness of orthophosphate removal on chitosan, regardless of its deacetylation degree, was obtained at pH 4. At pH 2 and 3, the chitosan flakes dissolved. This study showed that the sorption effectiveness of phosphorus compounds depends on the deacetylation degree of chitosan. Along with the increase in deacetylation degree, the sorption capacity of chitosan also increases in relation to orthophosphates. It is related to the higher number of amino groups in the structure of chitosan, which are responsible for the sorption of pollutants in the form of anions. The maximum sorption capacity of chitosan-DD = 75% in relation to biogen was 5.13 mg/g, chitosan-DD = 85% was 5.65 mg/g, and chitosan-DD = 90% was 5.91 mg/g. After 60 minutes, the desorption process had begun and was most likely caused by an increase in the pH of the solution. Due to chitosan's ability to neutralise the sample and the associated risk of desorption, the time of sorbent contact with sewage cannot be longer than 60 minutes.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2018, 23; 33-44
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorption of basic yellow 28 (by 28) and acid yellow 23 (ay 23) dyes onto chitin
Autorzy:
Filipkowska, Urszula
Kuczajowska-Zadrożna, Małgorzata
Jóźwiak, Tomasz
Szymczyk, Paula
Kaczyński, Adrian
Powiązania:
https://bibliotekanauki.pl/articles/1034812.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
ARE
adsorption
chitin flakes
dyes
isotherm models
Opis:
The present study investigated the sorption of Basic Yellow 28 (BY 28) and Acid Yellow 23 (AY 23) by chitin flakes. The study determined the influence of pH value on adsorption effectiveness and the adsorption capacity of chitin flakes. The results were described with Freundlich, Langmuir, Sips and double Langmuir isotherms. Similar values of adsorption capacities were achieved for both tested dyes using Langmuir, Sips and Langmuir2 models, i.e. 16.804, 17.740 and 18687 mg/g d.m. for BY28 as well as 24.195, 27.930 and 24.196 mg/g d.m. for AY23, respectively. The isotherms were compared with the use of average relative error (ARE) of approximation. In the case of both dyes, the best fit to experimental data was achieved with the use of tri-parametric Sips equilibrium isotherm, which was indicated by ARE values of 3.10% (BY 28) and 5.26% (AY 23).
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2015, 20; 34-42
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of cross-linked chitosan for phosphate removal from aqueous solutions
Autorzy:
Filipkowska, Urszula
Jóźwiak, Tomasz
Szymczyk, Paula
Powiązania:
https://bibliotekanauki.pl/articles/1035181.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
adsorption
chitosan
cross-linked chitosan
epichlorohydrin
glutaraldehyde
phosphates
Opis:
This study investigated the effectiveness of phosphate adsorption onto non-cross-linked chitosan beads [CHs], and onto chitosan beads cross-linked with glutaraldehyde [ALD-CHs] and epichlorohydrin [ECH-CHs]. The weight ratio of glutaraldehyde to chitosan was 1:2 (w/w), whereas that of epichlorohydrin to chitosan was 2:1 (w/w). The optimal pH value of the phosphate adsorption process was determined at pH 3 for cross-linked chitosan and at pH 4 for noncross- linked chitosan. The time needed to reach the equilibrium concentration reached 60 min for both adsorbents. Experimental data were described with the heterogeneous Langmuir model (double Langmuir equation). The most effective adsorbent of phosphates was shown to be chitosan cross-linked with epichlorohydrin [ECH-CHs] - for which the adsorption capacity reached 139.4 mg/g d.m.CHs. In the case of the remaining adsorbents (chitosan [CHs] and chitosan crosslinked with glutaraldehyde [ALD-CHs]) the adsorption capacity was lower and accounted for 44.38 mg/g d.m.CHs and 108.24 mg/g d.m.CHs, respectively.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2014, 19; 5-14
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cyclic sorption and desorption of reactive dyes onto chitosan beads
Autorzy:
Filipkowska, Urszula
Rodziewicz, Joanna
Powiązania:
https://bibliotekanauki.pl/articles/1035454.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
chitosan
cyclic sorption/desorption
reactive dyes
Opis:
The study was undertaken to analyze cyclic sorption and desorption of four reactive dyes: Reactive Yellow 84, Reactive Red 11, Reactive Black 5 and Reactive Black 8. onto chitosan beads. In all experimental series, dye and sorbent concentrations were constant and reached 50 mg/dm3 and 1 mg d.m./dm3, respectively. Determinations were conducted to investigate the effect of the sorbent on the effectiveness of dye removal. The number of feasible sorption/desorption cycles ranged from 6 to 3 and was found to depend on the type of dye tested. For all dyes examined, the quantity of dye accumulated onto chitosan beads and released from the solution was determined after each process of sorption and desorption.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2011, 16; 71-78
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of ph value and adsorbent concentration on the effectiveness of adsorption onto chitin and chitosan
Autorzy:
Filipkowska, Urszula
Rodziewicz, Joanna
Sobotka, Renata
Powiązania:
https://bibliotekanauki.pl/articles/1035550.pdf
Data publikacji:
2010
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
chitin
chitosan
reactive dye RB5
Opis:
The study was aimed at determining the effectiveness of reactive dye RB5 removal in the adsorption process onto chitin and chitosan as affected by the quantity of an adsorbent and pH value of the solution. The experiment was conducted at two concentrations of a sorbent, i.e. 1 and 5 mg d.m./dm3 and at three values of the reaction, i.e. pH 3.0, pH 5.0, and pH 9.0. The kinetics of RB5 sorption onto chitin and chitosan was described with the use of Langmuir model. In the case of both adsorbents examined, the highest adsorption capacity was achieved at pH 3.0 and adsorbent concentration of 1 g d.m./dm3. Increasing pH value up to pH 5.0 and 9.0 and adsorbent concentration in the sample from 1 to 5 g d.m./dm3 caused a decrease in the quantity of dye absorbed.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2010, 15; 79-86
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effectiveness of dye adsorption onto non-cross-linked and cross-linked chitosan beads
Autorzy:
Filipkowska, Urszula
Powiązania:
https://bibliotekanauki.pl/articles/1035401.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
adsorption
chitosan beads
cross-linked chitosan beads
dyes
glutaraldehyde
Opis:
The study was established to analyze the effectiveness of Reactive Black (RB5) and Basic Green (BG4) dyes adsorption onto chitosan beads and onto chitosan beads cross-linked with glutaraldehyde depending on the initial dye concentration in the solution (1, 5, 100 and 200 mg/dm3). It demonstrated that both the initial concentration of dye in the solution as well as the type of adsorbent affected the effectiveness of the adsorption process. An increase in the initial dye concentration in the solution was increasing adsorption effectiveness, irrespective of the type of dye and adsorbent. The cross-linking of chitosan beads with glutaraldehyde turned out to be beneficial only in the case of the RB5 dye.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2012, 17; 43-52
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of chitosan cross-linking on rb 5 dye adsorption efficiency
Autorzy:
Filipkowska, Urszula
Kuczajowska-Zadrożna, Małgorzata
Jóźwiak, Tomasz
Szymczyk, Paula
Nierobisz, Malwina
Powiązania:
https://bibliotekanauki.pl/articles/1034754.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
adsorption
cross-linked chitosan
dye RB5
Opis:
In this work, the effect of cross-linking of chitosan beads on the removal efficiency of dye RB 5 from aqueous solutions was defined. In the studies not crosslinked chitosan as well as chitosan cross-linked with a chemical cross-linking agent - glutaraldehyde and ionic cross-linking agent - pentasodium tripolyphosphate were used. The scope of the research included the determination of pH at which the adsorption process proceeded efficiently, study time, in order to designate the time, after which the reaction equilibrium is reached and to determine the kinetics of the adsorption process and constants in the Langmuir 2 equation. The work sets maximum sorption capacity of the sorbent non-crosslinked and two crosslinked sorbents. Based on these results, it was found that the highest removal efficiency of dye RB 5 was obtained for chitosan crosslinked with ion agent - pentasodium tripolyphosphate. The maximum sorption capacity of the sorbent amounted 1125.7 mg / g d.m. of chitosan.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2016, 21; 46-54
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of chitin amination on the effectiveness of rb5 and ry84 dye sorption
Autorzy:
Filipkowska, Urszula
Jóźwiak, Tomasz
Bugajska, Paula
Kuczajowska-Zadrożna, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/1034498.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
ammonification
chitin
dye
sorption
Opis:
This article presents the influence of chitin amination on the effectiveness of RB5 and RY84 dye sorption. For chitin and chitin modified by amination, the optimal pH of sorption and the maximum sorption capacity were determined in relation to two reactive dyes: Reactive Black 5 (RB5) and Reactive Yellow 84 (RY84), differing in the active group and molecular weight. Three sorption models were used to describe the experimental data: Langmuir, Langmuir 2 and Freundlich. The highest sorption capacity was obtained for aminated chitin for both tested dyes: 386.53 mg/g for RB5 and 261.56 mg/g for RY84. In the case of sorption on unmodified chitin, the sorption capacities were lower: up to 235.65 mg/g.d.m. for RB5 and 208.88 mg/g.d.m. for RY84. The modification of chitin by amination has a beneficial effect on the amount of dye adsorbed in the process. The adsorptive capacity increased by 1.6-times in the case of RB5 and 1.25-times in case of RY84.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2018, 23; 66-75
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of chitosan content in hydrogel beads on the sorption effectiveness of reactive black 5 dye
Autorzy:
Filipkowska, Urszula
Jóźwiak, Tomasz
Gache, Luminita
Bolozan, Ludmila
Powiązania:
https://bibliotekanauki.pl/articles/1034191.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
chitosan
dye
hydrogel beads
sorption
Opis:
The influence of chitosan content in hydrogel beads on the sorption effectiveness of Reactive Black 5 (RB5) dye from aqueous solutions is presented in the following work. The dry mass of chitosan in the tested hydrogel chitosan sorbents was from 2 to 10%. The influence of pH (4–11) on the sorption effectiveness of RB5 on chitosan hydrogels as well as the sorption capacity of the tested chitosan sorbents in relation to RB5 were studied. The optimal pH of RB5 sorption was determined along with the pH at the potential at zero point charge (pHPZC) of the tested sorbents. The maximum sorption capacity of the tested sorbents, depending on the amount of chitosan dry mass in the hydrogel beads, was determined. The obtained data was fit to Langmuir 1, Langmuir 2, and Freundlich models.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2019, 24; 36-48
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The use of active carbon immobilised on chitosan beads for rb5 and bv10 dye removal from aqueous solutions
Autorzy:
Filipkowska, Urszula
Jóźwiak, Tomasz
Szymczyk, Paula
Kuczajowska-Zadrożna, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/1034631.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
activity carbon
adsorption
chitosan
immobilisation
Opis:
This paper presents the adsorption of dyes – the anionic Reactive Black 5 (RB5) and cationic Basic Violet 10 (BV10) dyes – on activated carbon (AC) immobilised on chitosan (CHs). The results were compared with the removal efficiency of RB5 and BV10 on the individual sorbents: chitosan beads and activated carbon. In this study, the sorption capacities of the sorbents, sorption pH and the point of zero charge (pHZPC) were determined. For the description of the obtained results, the Freundlich, Langmuir and double Langmuir models were used. The results show that the developed sorbent (CHs-AC) is effective for both types of dye (RB5 or BV10) over a broad pH range 4–10, which makes it a universal sorbent. The maximum sorption capacity of CHs-AC with RB5 was 639.8 mg/g, while for BV10 it was 50.7 mg/g.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2017, 22; 14-26
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of chitosan ionically crosslinked with sodium edetate for reactive dyes removal from aqueous solutions
Autorzy:
Jóźwiak, Tomasz
Filipkowska, Urszula
Szymczyk, Paula
Kuczajowska-Zadrożna, Małgorzata
Mielcarek, Artur
Powiązania:
https://bibliotekanauki.pl/articles/1034883.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
chitosan beads
crosslinking
dyes sorption
sodium edetate
Opis:
In this study, we investigated the effect of chitosan crosslinking with sodium edetate (SE) on its sorption capacity of Reactive Black 5 and Reactive Yellow 84 dyes. The first stage of the study allowed establishing conditions of chitosan crosslinking. The process of ionic crosslinking was effective only at pH 4 and at the optimal dose of sodium edetate ranging from 0.046 to 0.462 g/g CHs. Process temperature in the range of 20-60oC had no significant effect on the stability of crosslinked chitosan. Contrary to the non-crosslinked chitosan (CHs), chitosan crosslinked with sodium edetate (CHs-SE) was capable of dyes sorption at pH 3. Sorption of reactive onto both CHs and CHs-SE was the most effective at pH 4. Chitosan crosslinking with SE had a positive effect on the effectiveness of RB5 and RY84 sorption. This effect was especially tangible within the first ten or so hours of sorption. After 24 h of the process, the sorption capacity of CHs-SE against RB5 and RY84 reached 1296.69 mg/g and 1883.62 mg/g, respectively. In the case of CHs, sorption capacity achieved after the same time was lower and accounted for 1025.55 mg RB5/g and 1539.67 mg RY84/g.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2015, 20; 82-96
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of cross-linked chitosan for nitrate nitrogen (v) removal from aqueous solutions
Autorzy:
Jóźwiak, Tomasz
Filipkowska, Urszula
Szymczyk, Paula
Mielcarek, Artur
Powiązania:
https://bibliotekanauki.pl/articles/1035179.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
adsorption
chitosan beads
cross-linked chitosan beads
dyes
glutaraldehyde
Opis:
This study was aimed at determining the possibility of applying non-cross-linked chitosan (CHs) as well as chitosan cross-linked with glutaraldehyde (CHs-GLA) and epichlorohydrin (CHSECH) for the removal of nitrates (V) from aqueous solutions. The scope of the study included determinations of: optimal pH value of nitrates sorption (from pH range of 2-11), equilibrium time of sorption process, and maximum N-NO3 sorption capacity of the analysed chitosan sorbents. Kinetics of nitrates sorption was described with pseudo-first and pseudo-second order equations, and with the intraparticle diffusion model. Sorption capacity analysis was conducted with the heterogeneous Langmuir model, the double Langmuir model and the Freundlich model. The optimal pH value of N-NO3 sorption onto CHs-GLA and CHs-ECH was pH 3, whereas onto CHs this was pH 4. The equilibrium time of sorption reaction was the same for all chitosan sorbents and reached 120 min. The maximum sorption capacity of CHs, CHs-GLA and CHs- ECH accounted for 12.71 mg N-NO3/g, 34.99 mg N-NO3/g and 38.47 mg N-NO3/g.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2014, 19; 41-52
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of cross-linking with glutaraldehyde on adsorption capacity of chitosan beads
Autorzy:
Jóźwiak, Tomasz
Filipkowska, Urszula
Rodziewicz, Joanna
Nowosad, Ewa
Powiązania:
https://bibliotekanauki.pl/articles/1035335.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
adsorption
chitosan beads
crosslinking chitosan beads
dyes
glutaraldehyde
Opis:
The study was undertaken to analyze the effect of chitosan cross-linking with glutaraldehyde on the adsorption capacity of chitosan beads during adsorption of Reactive Black (RB5) and Basic Green (BG4) dyes. Analyses were conducted at three pH values: pH 3.0; 5.0 and 9.0. Results obtained were evaluated with the use of four models of adsorption isotherms Freundlich, Langmuir, Double Langmuir and Redlic-Petreson. The cross-linking of beads with glutaraldehyde turned out to be beneficial for the anionic dye RB5. Compared to the non-cross-linked beads, a comparable adsorption capacity (over 500 mg/g d.m.) was obtained at pH 3.0 and pH 5.0. In the case of the cationic dye, chitosan cross-linking reduced the quantity of adsorbed dye, irrespective of the pH value of the adsorption process.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2013, 18, 18; 35-47
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of dyes from aqueous solutions by glauconite immobilised on chitosan hydrogel beads
Autorzy:
Jóźwiak, Tomasz
Filipkowska, Urszula
Szymczyk, Paula
Kuczajowska-Zadrożna, Małgorzata
Mielcarek, Artur
Powiązania:
https://bibliotekanauki.pl/articles/1034580.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
Basic Violet 10
Reactive Black 5
chitosan
glauconite
hydrogel beads
immobilisation
sorption
Opis:
The sorption capacity of glauconite, glauconite immobilised on chitosan hydrogel beads and unmodified chitosan hydrogel beads against Reactive Black 5 and Basic Violet 10 was compared in this article. The effect of pH on the sorption effectiveness of dyes on the tested sorbents was investigated and the sorption capacity of sorbents after 24 and 72 h was determined. Langmuir sorption, double Langmuir and Freundlich isotherms were used to describe the experimental data. The adsorption efficiency of the dyes on sorbents containing chitosan was highest at pH 4. In the case of glauconite, Reactive Black 5 removal efficiency was the highest at pH 3, and Basic Violet 10 removal efficiency was highest at pH 2. The sorption capacity of glauconite immobilised on chitosan hydrogel spheres obtained after 72 h was -656.73 mg/g and -32.77 mg/g for Reactive Black 5 and Basic Violet 10, respectively.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2017, 22; 54-65
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of chitosan deacetylation degree on reactive black 5 sorption efficiency from aqueous solutions
Autorzy:
Jóźwiak, Tomasz
Filipkowska, Urszula
Szymczyk, Paula
Kuczajowska-Zadrożna, Małgorzata
Mielcarek, Artur
Zyśk, Michał
Powiązania:
https://bibliotekanauki.pl/articles/1034679.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
Reactive Black 5
chitosan
deacetylation degree
sorption
Opis:
In the paper sorption capacity of chitosan having a deacetylation degree DD=75%, DD=85% and DD=90% relatively to the Reactive Black 5 were compared. Studies on the effectiveness of the dye sorption were carried out in a wide pH range – from 3 to 11. For each of the tested chitosan sorbents, sorption capacity has been determined. The results were described by isotherms Freundlich and Lagmuir isotherms, and a double Langmuir isotherm. Sorption of Reactive Black 5 most efficiently occurred at pH 4. At pH <4 chitosan sorbents underwent dissolution, regardless of the degree of deacetylation. The efficiency of dye sorption increased with the degree of deacetylation. The sorption capacity calculated after 12 h of the chitosan sorption with DD=75%, DD=85% and DD =90% was, relatively to the Reactive Black 5, respectively 433.03 mg/g and 464.52 mg/g and 532.14 mg/g. The impact of the deacetylation degree on pHZPC (zero point of charge) of the sorbent was also examined. Along with the increase in the deacetylation degree the value of chitosan pHZPC increased as well and at DD=75% DD=85% and DD=90%, pHZPC amounted respectively 7.6, 7.7 and 7.8.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2016, 21; 83-92
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies