Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Fang, S." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Fault monitoring and fault recovery control for position-moored vessels
Autorzy:
Fang, S.
Blanke, M.
Powiązania:
https://bibliotekanauki.pl/articles/907618.pdf
Data publikacji:
2011
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
diagnostyka uszkodzeń
sterowanie tolerujące uszkodzenia
usuwanie błędu
wykrywanie zmian
fault diagnosis
fault tolerant control
fault recovery
position mooring
non Gaussian change detection
Opis:
This paper addresses fault-tolerant control for position mooring of a shuttle or floating production storage and offloading vessels. A complete framework for fault diagnosis is presented. A loss of a sub-sea mooring line buoyancy element and line breakage are given particular attention, since such failures might cause high-risk abortion of an oil-loading operation. With significant drift forces from waves, non-Gaussian elements dominate forces and the residuals designed for fault diagnosis. Hypothesis testing is designed using dedicated change detection for the type of distribution encountered. A new position recovery algorithm is proposed as a means of fault accommodation in order to keep the mooring system in a safe state, despite faults. The position control is shown to be capable of accommodating serious failures and preventing breakage of a mooring line, or a loss of a buoyancy element, from causing subsequent failures. Properties of the detection and fault-tolerant control algorithms are demonstrated by high fidelity simulations.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2011, 21, 3; 467-478
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laser Ignition of an Optically Sensitised Secondary Explosive by a Diode Laser
Autorzy:
Fang, X.
Ahmad, S. R.
Powiązania:
https://bibliotekanauki.pl/articles/358053.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
laser ignition
explosive
optical sensitizers
Opis:
As a green technology, laser ignition of a relatively insensitive secondary explosive has been experimentally investigated. The explosive, hexanitrostilbene (HNS), was doped with one of two optical sensitizers, carbon black or a laser absorbing dye, and a continuous-wave (CW) infrared diode laser was used as the igniting source. The ignition sensitivities of HNS with each of the two optical sensitizers were analysed and compared in terms of: optical power threshold for ignition, ignition delay and full burn delay at various laser powers. The results have shown that both the chemical dye and carbon black optically sensitize the explosive with similar efficiencies. In contrast to the carbon black, the dye provides wavelength specificity and selectivity in the laser ignition process and its solubility in some specific solvents improves the coating of the explosive material. It was therefore concluded that the laser absorbing dye is a better candidate for optical sensitization in laser ignition than the commonly used carbon black. The combination of laser ignition sensitivity with wavelength selectivity potentially offers higher reliability and safety at a low optical power for future ignitors of secondary explosives.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 1; 103-115
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Processing Techniques on Mechanical Properties and Impact Initiation of an Al-PTFE Reactive Material
Autorzy:
Feng, B.
Fang, X.
Li, Y.-C.
Wu, S.-Z.
Mao, Y.-M.
Wang, H.-X.
Powiązania:
https://bibliotekanauki.pl/articles/358654.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
Al-PTFE
reactive materials
quasi-static compression
impact initiation
Opis:
Reactive materials (RMs) or impact-initiated materials have received much attention as a class of energetic materials in recent years. To assess the influence of processing techniques on mechanical properties and impact initiation behaviors of an Al-PTFE reactive material, quasi -static compression tests and drop-weight tests were performed. Scanning electron microscopy (SEM) was used to identify the characteristics of the interior microstructures of the Al-PTFE samples. A sintering process was found to transform Al-PTFE from a brittle to a ductile material with an increased elasticity modulus (from 108-160 MPa to 256-336 MPa) and yield stress (from 12-16 MPa to 19-20 MPa). Increasing the molding pressure from 36 MPa to 182 MPa increased the elastic modulus of all Al-PTFE samples and also the yield stress of unsintered ones. Unsintered samples in general required less energy to initiate than sintered ones. As the molding pressure increased, the impact initiation energy for sintered Al-PTFE fell from 96 J to 68 J, whereas the initiation energy for unsintered Al-PTFE rose from 68 J to 85 J. PTFE nanofiber networks observed in sintered samples formed under the higher molding pressures could contribute to the opposite trends observed in the impact initiation energy of unsintered and sintered Al-PTFE samples.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 989-1004
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies