Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Dziedzic, J." wg kryterium: Autor


Tytuł:
Voice command recognition using hybrid genetic algorithm
Autorzy:
Wroniszewska, M.
Dziedzic, J.
Powiązania:
https://bibliotekanauki.pl/articles/1955309.pdf
Data publikacji:
2010
Wydawca:
Politechnika Gdańska
Tematy:
voice command recognition
genetic algorithms
K-nearest neighbour
hybrid approach
Opis:
Speech recognition is a process of converting the acoustic signal into a set of words, whereas voice command recognition consists in the correct identification of voice commands, usually single words. Voice command recognition systems are widely used in the military, control systems, electronic devices, such as cellular phones, or by people with disabilities (e.g., for controlling a wheelchair or operating a computer system). This paper describes the construction of a model for a voice command recognition system based on the combination of genetic algorithms (GAs) and K-nearest neighbour classifier (KNN). The model consists of two parts. The first one concerns the creation of feature patterns from spoken words. This is done by means of the discrete Fourier transform and frequency analysis. The second part constitutes the essence of the model, namely the design of the supervised learning and classification system. The technique used for the classification task is based on the simplest classifier – K-nearest neighbour algorithm. GAs, which have been demonstrated as a good optimization and machine learning technique, are applied to the feature extraction process for the pattern vectors. The purpose and main interest of this work is to adapt such a hybrid approach to the task of voice command recognition, develop an implementation and to assess its performance. The complete model of the system was implemented in the C++ language, the implementation was subsequently used to determine the relevant parameters of the method and to improve the approach in order to obtain the desired accuracy. Different variants of GAs were surveyed in this project and the influence of particular operators was verified in terms of the classification success rate. The main finding from the performed numerical experiments indicates the necessity of using genetic algorithms for the learning process. In consequence, a highly accurate recognition system was obtained, providing 94.2% correctly classified patterns. The hybrid GA/KNN approach constituted a significant improvement over the simple KNN classifier. Moreover, the training time required for the GA to learn the given set of words was found to be on a level that is acceptable for the efficient functioning of the voice command recognition system.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2010, 14, 4; 377-396
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of selected properties of raw material on quality features of granular fertilizers obtained from digestates and ash mixtures
Wpływ wybranych właściwości surowca na cechy jakościowe granulatów nawozowych uzyskanych z mieszanek substancji pofermentacyjnej i popiołu
Autorzy:
Wróbel, M.
Frączek, J.
Jewiarz, M.
Mudryk, K.
Dziedzic, K.
Powiązania:
https://bibliotekanauki.pl/articles/93673.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
biomass ash
digestate
organic-mineral fertilizer
granular fertilizer
popiół z biomasy
substancja pofermentacyjna
nawóz organiczno-mineralny
granulat nawozowy
Opis:
The paper presents the results of research, the objective of which was to determine the impact of particle size distribution and density of digestates and ash on density and tensile strength of granular fertilizer obtained from mixtures of these substrates. Particle size distribution, absolute density, envelope density and porosity of substrates were determined. Granular fertilizers were made of clean substrates and their mixtures. Envelope density of the obtained granulates was within 0.81-1.88 g⋅cm-3. The determined compaction degree was within 3.65- 10.12. While, the compaction index IS of granulates made of mixtures was within 0.5-0.55 and was lower in comparison to IS of granulates from digestates (0.6) and ash (0.76).
W pracy przedstawiono wyniki badań, których celem było określenie wpływu składu ziarnowego i gęstości substancji pofermentacyjnej oraz popiołu na gęstość i wytrzymałość granulatów nawozowych, uzyskanych z mieszanek tych substratów. Wyznaczono skład ziarnowy, gęstość bezwzględną, gęstość pozorną oraz porowatość substratów. Wykonano granulaty nawozowe z czystych substratów oraz z ich mieszanek. Gęstość pozorna uzyskanych granulatów zawierała się w przedziale 0,81-1,88 g⋅cm-3 . Wyznaczony stopień zagęszczenia zawierał się w przedziale 3,65-10,12. Natomiast wskaźnik zagęszczenia IS granulatów z mieszanek mieścił się w przedziale 0,5- 0,55 i był niższy w porównaniu do IS granulatów z substancji pofermentacyjnych (0,6) i popiołu (0,76).
Źródło:
Agricultural Engineering; 2016, 20, 4; 207-217
2083-1587
Pojawia się w:
Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Verification of navigational decision supporting system on the ECDIS simulator
Weryfikacja nawigacyjnego systemu wspomagania decyzji na symulatorze ECDIS
Autorzy:
Wołejsza, P.
Magaj, J.
Dziedzic, T.
Wielgosz, M.
Powiązania:
https://bibliotekanauki.pl/articles/360399.pdf
Data publikacji:
2010
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
ECDIS
zderzenie
system wspierania decyzji
collision
decision support system
Opis:
The report presents the results of simulations carried out at the ECDIS laboratory of the Maritime University in Szczecin. Their purpose was to verify the correctness of results obtained from authors’ programme, in particular the calculated meeting parameters of vessels and the collision prevention manoeuvre made.
W raporcie przedstawiono wyniki symulacji dokonanych w laboratorium ECDIS w Akademii Morskiej w Szczecinie. Celem było sprawdzenie poprawności wyników otrzymanych z autorskiego programu, w szczególności wskazanie parametrów spotkania statków i manewrów zapobiegających kolizjom.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2010, 22 (94); 78-82
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ promieniowania UV na stan mikrobiologiczny skorupy oraz jakość treści jaj
Effect of UV radiation on microbiological condition of eggshell and on quality of egg content
Autorzy:
Szablewski, T.
Kijowski, J.
Cegielska-Radziejewska, R.
Dziedzic, A.
Kaminska, A.
Powiązania:
https://bibliotekanauki.pl/articles/826490.pdf
Data publikacji:
2009
Wydawca:
Polskie Towarzystwo Technologów Żywności
Tematy:
analiza mikrobiologiczna
higienizacja
jaja kurze
jaja spozywcze
jakosc
powierzchnia skorupy jaj
promieniowanie ultrafioletowe
skorupy jaj
stan mikrobiologiczny
tresc jaj
Opis:
Celem pracy była ocena stanu mikrobiologicznego powierzchni skorup jaj konsumpcyjnych higienizowanych przy użyciu promieniowania UV-C 254 nm oraz określenie wpływu tego procesu na wybrane wyróżniki jakościowe treści jaj. Jaja poddano działaniu promieniowania UV-C 254 nm w naświetlaczu do jaj typu UV 254 (CompArt). Analiza mikrobiologiczna obejmowała oznaczenie na powierzchni skorup ogólnej liczby drobnoustrojów i bakterii z grupy coli oraz obecność pałeczek z rodzaju Salmonella. Oznaczenia wykonano bezpośrednio po naświetlaniu powierzchni skorup jaj oraz po 2 i 4 tygodniach przechowywania – wobec prób kontrolnych (nienaświetlanych). Stosowano różne dawki promieniowania wyrażone czasem naświetlania: 30, 60 i 90 s. Jaja użyte w eksperymencie miały różne stopnie zabrudzenia skorupy: brudne, wizualnie czyste i myte. Następnie oceniono indeksy białka i żółtka, wyznaczono jednostki Haugha, określono pienistość, trwałość piany oraz zmierzono pH. Stwierdzono, że naświetlanie jaj kurzych promieniowaniem UV-C 254 nm przez 30, 60 i 90 s nie spowodowało statystycznie istotnej redukcji ogólnej liczby drobnoustrojów na powierzchni skorupy jaj konsumpcyjnych. W przypadku naświetlania jaj przez 30 i 90 s zaobserwowano jednak tendencję zmniejszania się ogólnej liczby drobnoustrojów. Wykazano, że proces mycia jaj brudnych w połączeniu z zastosowaniem naświetlania promieniowaniem UV-C 254 nm może skutecznie redukować liczbę bakterii z grupy coli na powierzchni skorupy jaj konsumpcyjnych. Statystyczna analiza danych eksperymentalnych za pomocą testu Tukey`a nie wykazała istotnego wpływu promieniowania UV-C 254 nm na którykolwiek z badanych wyróżników jakości treści jaj. Obserwowane zmiany badanych cech związane były jedynie z naturalnie postępującym w czasie przechowywania procesem starzenia się jaj. Uzyskane wyniki dowodzą, że promieniowanie UV-C 254 nm może być bezpiecznym sposobem higienizacji skorupy jaj konsumpcyjnych. Przedstawiony eksperyment skłania do dalszych badań nad skutecznością promieniowania UV-C 254 nm.
The objective of the study was to assess the microbiological condition of eggshell surface of eggs suitable for eating, which were treated (for the purpose of their hygienization) using an UV-C 254 nm ultraviolet radiation, as well as to determine the effect of this process on some selected quality factors of the egg content. The eggs were exposed to the UV-C 254 nm ultraviolet radiation in an egg radiator type UV 254 (CompArt). A microbiological analysis of the quality of eggshell surface included the determination of the following: - total number of micro-organisms on the eggshell surface; - the count of bacteria belonging to the coli group; - the occurrence of Salmonella enteritidis. The determination procedure was performed directly after the eggshell irradiation and after 2 and 4 weeks storage thereof, and compared with the control sample of eggs (which were not irradiated). Various radiation doses were applied; those doses were expressed using a radiation time duration of 30, 60, and 90 sec. In the experiment, there were used eggs showing different dirt on their eggshells, i.e.: dirty, visually clean, and washed eggshells. Next, the following was determined: white and yolk indices, Haugh units, foaming, foam stability; also, the pH was measured. It was found that the exposure of eggs to the UV-C 254 nm radiation for a period of 30, 60, and 90 sec caused no statistically significant reduction in the count of microbes on the eggshell surface of eggs suitable for eating. However, it was found that when the eggs were treated with this radiation during 30 and 90 sec, the total count of microbes tended to fall. Furthermore, it was proved that it was possible to effectively reduce the count of E. coli, when the eggs were, at the same time, washed and irradiated using the UV-C 254 nm radiation. The statistical analysis of the experimental data using a Tukey’s test did not show any significant impact of the UV-C 254 nm radiation on any of the quality factors of the egg content. The changes that were stated in the egg features studied were correlated exclusively with the aging process of eggs progressing during their storage. The results obtained prove that the UV-C 254 nm radiation can be a safe eggshell higienization method of the eggs suitable for eating. The experiment presented in this paper encourages further studies on the efficacy of the UV-C 254 nm.
Źródło:
Żywność Nauka Technologia Jakość; 2009, 16, 2
1425-6959
Pojawia się w:
Żywność Nauka Technologia Jakość
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metodyka oceny uszkodzenia elementów konstrukcyjnych na przykładzie belki izotropowej jednostronnie utwierdzonej
Methodology of structures damage estimation in case of cantilever isotropic beam
Autorzy:
Samborski, S.
Wieczorkiewicz, J.
Rusinek, R.
Dziedzic, J.
Powiązania:
https://bibliotekanauki.pl/articles/101810.pdf
Data publikacji:
2015
Wydawca:
Politechnika Lubelska. Polskie Towarzystwo Promocji Wiedzy
Tematy:
detekcja uszkodzeń
belka wspornikowa
płaszczyzna fazowa
damage detection
cantilever beam
phase space diagram
Opis:
W pracy zbudowano model numeryczny belki wspornikowej z uszkodzeniem i bez uszkodzenia oraz wyznaczono ichczęstości własne dla zadanych charakterystyk mate-riałowych. Następnie przeprowadzono badania na fizycznym obiekcie przy użyciu wibrometru laserowego PSV-500 firmy Polytec. Otrzymane rezultaty doświadczalne porównano z wynikami obliczeń nume-rycznych stosując metody analizy sygnału oparte na wykresach płaszczyzny fazowej.
This paper focuses on analysis of damage detection cantilever beam. Finite Element Method was used to simulate vibrations of the intact and the damaged beams. Analysis of natural frequencies of both the intact and the damaged beams was performed in order to observe the effect of damage on the beams dynamics. Next, the phase diagrams technique was applied andfinally, experimental verification was performed to check the numerical results.
Źródło:
Journal of Technology and Exploitation in Mechanical Engineering; 2015, 1, 1-2; 5-16
2451-148X
Pojawia się w:
Journal of Technology and Exploitation in Mechanical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
EPR study on biominerals as materials for retrospective dosimetry
Autorzy:
Sadło, J.
Michalik, J.
Stachowicz, W.
Strzelczak, G.
Dziedzic-Gocławska, A.
Ostrowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/146095.pdf
Data publikacji:
2006
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
dosimetry
EPR dating
accidental dosimetry
hydroxyapatite
Opis:
Stable paramagnetic species, induced by irradiation in biominerals, can be successfully used as an EPR dosimeter in numerous domains of scientific activity. In hydroxyapatite, the main mineral component of bones, the most stable signal is assigned to CO2 - ion radical. The signal is dose dependent and allows to determine the absorbed dose in a wide range till 20 kGy, with detection limit for tooth enamel below 1 Gy. The additive dose method was applied to EPR dating of archeological objects and EPR dosimetry after accidental overexposing during radiotherapy. It was found that the age of remains excavated from the “tomb of giants” belonging to Nuraghic culture developed in Sardinia island is about 3160 years old (1160 years BC). The dose obtained by patients during the accident at the Białystok Oncological Center was evaluated at about 75 Gy. Searching for potential dosimeters among other biominerals shows that mollusc shells have very promising properties. The lowest dose detection limit was found for an Arcidae shell. Both fresh water and sea mollusc shells are useful to be used for dosimetry in the low dose range.
Źródło:
Nukleonika; 2006, 51,suppl.1; 95-100
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
MD simulations of ultraprecision machining of fcc monocrystals
Autorzy:
Rychcik-Leyk, M.
Białoskorski, M.
Dziedzic, J.
Rybicki, J.
Powiązania:
https://bibliotekanauki.pl/articles/1943186.pdf
Data publikacji:
2010
Wydawca:
Politechnika Gdańska
Tematy:
nanomachining
nanocutting
nanomechanical properties
nanoplasticity
Opis:
In technical sciences, the term "machining" refers to the process of forming an object into a desired shape and size, with a desired quality of surface, by removing layers of its material by means of a cutting tool. The paper describes research on ultra-precision machining (UPM), where the abovementioned process takes place on the atomic level and involves systems (a machined object and a tool) several dozen nanometers in size. Three-dimensional computer simulations (virtual experiments) of UPM of monocrystalline copper with an infinitely hard tool were performed utilizing the classical molecular dynamics (MD) method with a many-body potential to describe the interatomic interactions. Among the examined issues were: the effect of the tool shape, machining speed and depth on the obtained workmaterial surfaces, and on the stresses, slip patterns and local temperature increases generated during the process.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2010, 14, 1-2; 35-167
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Shearing strength test of orthopaedic titanium alloy screw produced in the process of 3D printing technology
Autorzy:
Ruszniak, P.
Józwik, J.
Ostrowski, D.
Dziedzic, K.
Powiązania:
https://bibliotekanauki.pl/articles/102259.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
3D printing
incremental technologies
titanium alloy
shear stress
orthopaedic screws
Opis:
The aim of the present article is the assessment of technical shear resistance (technological shear) of orthopedic screw made of titanium alloy Ti6Al4V, produced using incremental technology in the process of 3D printing process. The first part of the work presents incremental techniques in production engineering. The second part of the present work contains a specification of the 3D printing process of samples as well as the description of the used material. The fundamental part of the article is composed out of endurance tests for orthopaedic screws as well as the analysis of the obtained results and conclusions. The method of incremental production SLM using SLM 280HL metal printer was used during the technological process. The resistance tests were performed using ZWICK/ROELL Z150 machines. Identical endurance trials were performed for monolithic bars made of titanium alloys (of bar core size ) made on a wire electric discharge machine Sodick SL600Q for comparative purposes. The obtained test results enabled comparative assessment of the value of shear resistance Rt in the conditions of technological shear. According to the performed tests, the shear resistance Rt of orthopaedic screws is nearly 33% lower than of monolithic bars of the same core size.
Źródło:
Advances in Science and Technology. Research Journal; 2017, 11, 1; 128-137
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Potrzeba integracji właściwości wytrzymałościowych skał - baza danych geomechanicznych
A need to integrate geomechanical properties of rocks - a geomechanical database
Autorzy:
Pinińska, J.
Łukaszewski, P.
Dziedzic, A.
Domonik, A.
Powiązania:
https://bibliotekanauki.pl/articles/2063243.pdf
Data publikacji:
2008
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
surowce skalne
baza danych
geomechanika
geomatyka
GIS
rock resources
database
geomechanics
geomatics
Opis:
W artykule przedstawiono koncepcję usystematyzowanego i ujednoliconego systemu gromadzenia i przetwarzania danych geomechanicznych, opartego na obiektowo-relacyjnej bazie danych. Istniejąca w Polsce bogata dokumentacja właściwości geomechanicznych ośrodków skalnych nie jest dotychczas zintegrowana i zunifikowana, co uniemożliwia ich identyfikację i kategoryzację. Baza ma służyć do inwentaryzacji właściwości skał i masywów skalnych w ujęciu litologicznym i regionalnym oraz będzie współpracować z zewnętrznym serwerem geoinformacyjnym. W proponowanym systemie założono, że do obiektów geoprzestrzennych, takich jak odsłonięcia, otwory wiertnicze, wyrobiska górnicze czy też zabytkowe konstrukcje kamienne, można w prosty sposób przypisać określone współrzędne geograficzne, zgodnie z założeniami systemu G1S. W ten sposób stwarza się możliwość integracji przestrzennej z mapami geologicznymi, gospodarczymi czy też z planami zagospodarowania przestrzennego. Zastosowany pojęciowy model obiektu, opracowany zgodnie z normami dotyczącymi geoinformacji, definiuje elementy i atrybuty danych występujących w systemie oraz wzajemne ich relacje, a do jego budowy wykorzystano metodykę języka UML. Model dotyczy danych laboratoryjnych i terenowych uzyskanych w nawiązaniu do normy PN-EN ISO 14689-1, z zadaniem stosowania jej wymogów odnośnie geologicznych podstaw systemowych.
This paper describes the concept of systematized and unified data acquisition and processing based on Object-Relative database. In Poland, the existing rich documentation of geomechanical properties of rocks has not been integrated and unified, making categorization and identification impossible. The database should be useful for inventory of properties of rocks and rock massifs in lithological and regional meaning, and should be able to cooperate with external geoinformation server. The presented system is based on the statement that geospatial objects, e.g. exposures, boreholes, excavations or historic stone monuments, have simple attributes like geographic coordinates according to GIS assumptions. In this way the possibility of integration with geological and economic maps or land development plans is obtainable. The implemented conceptual model of object, developed in accordance with geoinformation standards, defines elements and attributes of information contained in the database and their interrelation. The UML language is used to define the model. The model concerns laboratory and field data obtained according to the PN-EN ISO 14689-1 standard designed for creation of geological system foundations.
Źródło:
Biuletyn Państwowego Instytutu Geologicznego; 2008, 429; 139-144
0867-6143
Pojawia się w:
Biuletyn Państwowego Instytutu Geologicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The methodology of a complex engineering-geological approach to establish a Geopark : case study of the Małopolska Vistula River Gorge
Autorzy:
Pinińska, J.
Domonik, A.
Dziedzic, A.
Łukasiak, D.
Powiązania:
https://bibliotekanauki.pl/articles/2060277.pdf
Data publikacji:
2015
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
geopark
geosite
Małopolska Vistula Gorge
touristic safety
maintenance safety
GIS
integrated digital engineering-geological maps
Opis:
Małopolska Vistula River Gorge is located in the middle stretch of the Vistula valley between Zawichost and Puławy. Its great portion is supposed to be turned into a Geopark safely approachable by tourists along walking trails leading to planned geosites. While general criteria of geosite selection are oriented on promoting expected interesting attributes of the planned Geopark or, in a special case, on recognizing possible strong geological hazards such as volcanic, earthquake and tsunami phenomena, the inner problems of tourist safety are not commonly recognized. The Vistula Gorge and its close vicinity of Geopark is dedicated to cultural heritage, geological history, landscape and local folklore. The inner hazards of disasters are created here by steep, slippery paths, collapsible loessial canyons, rock-falls from weathered rock-walls, and high waters of the nearby river channel running alongside or flooding tourist footpaths. Recognition and preventing measures against such hazard require determination of the current engineering-geological conditions by testing rock and soil properties along the gorge, and by checking the likelihood of natural disturbance of the terrain safety. The vulnerability of exposed rocks to processes of natural erosion, steady weathering progress, turning steep clayey bluffs into slippery ground, and to an impact of long-term anthropogenic factors had to be recognized, checked, and tested for a final assessment of suitability of the selected place to serving as a Geopark. The special prognostic procedure of engineering-geological hazards was recommended, applicable prior to the Geopark planning stage. The procedure encompasses a thorough assessment of possible safe accessibility to particular geosites in the area designated to become a Geopark. The suitability of the selected area to serving as a Geopark was, thus, analyzed methodically with regard to a detailed engineering-geological and geomechanical evaluation of possible hazard factors within the whole terrain. Proven engineering geological methodologies were employed for the hazard assessment procedure. Each of the factors was subjected individually to close examination, with results recorded into a GIS integrated informative layer, and envisioned upon digital thematic maps. These maps remain to be used for the preparation of regional suitability maps of specific engineering-geological conditions.
Źródło:
Geological Quarterly; 2015, 59, 2; 408--418
1641-7291
Pojawia się w:
Geological Quarterly
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Volume density and longitudinal wave velocity changes of the Ciężkowice and Krosno flysch sandstones under high pressure and temperature in the triaxial test condition
Zmiany gęstości objętościowej i prędkości fali podłużnej skał fliszowych: piaskowców Ciężkowickich i Krośnieńskich pod wpływem wysokiego ciśnienia i temperatury w warunkach trójosiowego ściskania
Autorzy:
Pinińska, J.
Dziedzic, A.
Powiązania:
https://bibliotekanauki.pl/articles/230495.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
głębokość duża
ciśnienie wysokie
temperatura
głębokość objętościowa
prędkość fali podłużnej
piaskowiec
ściskanie trójosiowe
Ciężkowice
Krosno
great depth
high pressure
temperature
volume density
longitudinal wave velocity
sandstone
triaxial tests
Opis:
The poorly cemented Ciężkowice poorly sorted sandstone and the compact Mucharz fine grain sandstone have been laboratory tested at the triaxial compressing conditions in thermo-pressurized chamber of a rigid press MTS-815. The confining pressure range from 0 to 96 MPa and the temperature: T from 22°C to 120°C (simulated 500 m intervals from the surface to the depth of 3500 m). During each test, the characteristics of deformation and the elastic wave velocity paths were simultaneously monitored. The volume density and longitudinal wave velocity showed a non-linear increase with the progress of simulated depth, a volume density growth by 1.6 to 4.0%, and the elastic wave velocity up to 250% of the primary value (surface condition), dependable on loading path, phase of deformation, and varying type of lithology. That may lead to wide error margin in a determination of rock's engineering properties and also create discrepancies between the static parameters of rocks (Est,gvst) determined by standard laboratory load tests, and the dynamic parameters (Ed, vd) determined from the wave velocity and volume density.
Gęstość objętościowa skał oraz prędkość fal sprężystych są stosowane do identyfikacji właściwości i litologii skał na dużych, niedostępnych dla bezpośrednich obserwacji głębokościach. Znaczne ciśnienie (P) oraz wysoka temperatura (T) powodują zmiany prędkości propagacji fali (Vp) oraz gęstości objętościowej (Ps), co utrudnia zdalne rozpoznanie odmiennych litologicznie skał oraz prowadzi do znacznych błędów w ocenie inżynierskiej ich parametrów. W wyniku laboratoryjnych badań wytrzymałościowych w komorze termociśnieniowej, w warunkach trójosiowego ściskania przy zróżnicowanych ciśnieniach obwodowych w przedziale od 0 do 90 MPa i temperaturze (T) od 22 do 120°C (symulujących co 500 m interwały wzrostu głębokości od powierzchni do 3500 m), słabo zwięzłe, różnoziarniste piaskowce ciężkowickie oraz zwięzłe, drobnoziarniste piaskowce z Mucharza, wykazały nieliniowy wzrost gęstości objętościowej od 1,4 do 4,0% i dochodzący do 250% wzrost prędkości fali podłużnej w stosunku do wartości początkowej (warunki powierzchniowe). Zmiany zależały od ścieżki obciążania, faz deformacji oraz zróżnicowania litologicznego skały.
Źródło:
Archives of Civil Engineering; 2011, 57, 1; 73-85
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Variscan multistage granitoid magmatism in Brunovistulicum: petrological and SHRIMP U-Pb zircon geochronological evidence from the southern part of the Strzelin Massif, SW Poland
Autorzy:
Oberc-Dziedzic, T.
Kryza, R.
Białek, J.
Powiązania:
https://bibliotekanauki.pl/articles/2059086.pdf
Data publikacji:
2010
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
Variscides
Bohemian Massif
Strzelin Massif
granitoids
Opis:
U-Pb SHRIMP ages of one granodiorite and two tonalite samples from the Strzelin Massif, northern part of Brunovistulicum, reveal three distinct stages of Carboniferrous-early Permian granitoid magmatism: tonalitic I - 324 Ma, granodioritic - 305 Ma and tonalitic II/granitic - 295 Ma. The first stage of magmatism coincided with the first migmatization event which took place shortly after the first deformation. The second stage of granitoid plutonism was coeval with the second migmatization event which produced abundant pegmatites. It took place after compressional phases of the second deformation and was related to decompression at the beginning of tectonic denudation. The third, most abundant stage of magmatism was connected with late extension in that part of the Variscan Orogen.
Źródło:
Geological Quarterly; 2010, 54, 3; 301-324
1641-7291
Pojawia się w:
Geological Quarterly
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of endoscopic tattooing in intraoperative localization of colon tumours and sentinel lymph nodes
Autorzy:
Nowak, N.
Dziedzic, J.
Nurczyk, K.
Zakoscielny, A.
Bury, P.
Zgodzinski, W.
Zinkiewicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/2097996.pdf
Data publikacji:
2020
Wydawca:
Instytut Medycyny Wsi
Tematy:
colorectal cancer
surgical treatment
endoscopy
endoscopic tatooing
non-invasive technique
Opis:
Introduction. Minimally invasive techniques in colorectal surgery have become increasingly popular and are considered a standard of care in most surgical cenres. Locating the tumour during laparoscopic procedure can be technically challenging. Incorrect localization of the primary lesion may lead to a non-radical resection margin. The technique of endoscopic tattooing (ET) prior to surgery or endoscopic treatment is considered a useful tool. Various dyes can be used for this purpose, such as: Indian ink, methylene blue, indigocarmine, toluidine blue, isosulfan blue, haematoxylin and eosin, indoxin green. This procedure is recommended by international scientific societies (ASGE and ESGE). Objective. The purpose of the study is to review the current literature on the use of ET in large intestine tumour lesions. Materials and method. A MEDLINE literature search of English language articles addressing the use of ET to enable intraoperative tumour localization in colorectal surgery was performed to evaluate and summarize the feasibility of this technique. Results. The use of ET enables the easy and safe localization of colorectal tumurs during minimally invasive colorectal procedures. The percentage of complications is insignificant. Conclusions. The available literature proves the safety and benefits of using the ET prior to surgical or endoscopic treatment. ASGE and ESGE recommend the use of ET in marking tumours before surgical treatment, and the area after endoscopic resection for further evaluation.
Źródło:
Journal of Pre-Clinical and Clinical Research; 2020, 14, 4; 134-138
1898-2395
Pojawia się w:
Journal of Pre-Clinical and Clinical Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of mechanical dewatering of digestate
Analiza procesu mechanicznego odwadniania pofermentu
Autorzy:
Mudryk, K.
Frączek, J.
Jewiarz, M.
Wróbel, M.
Dziedzic, K.
Powiązania:
https://bibliotekanauki.pl/articles/93405.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
mechanical dewatering
digestate
screw press
moisture
odwadnianie mechaniczne
poferment
prasa ślimakowa
wilgotność
Opis:
Technology of processing of agricultural raw material and production residues from agri-food industry often requires their dewatering. Digestate is one of such materials i.e. the mass remaining after the bio-gasification process, which has great hydration (above 85%). The objective of the research was to know the impact of dewatering on the change of water content in digestate from biogas in Piekoszów. A mechanical dewatering process was carried out and reflected the conditions of operation of screw presses for dewatering of plant raw materials, whose screen internal diameter is 160 mm. Knowing the impact of pressure on the dynamics of raw material moisture decrease will allow modelling of the operation of industrial devices with similar operation parameters. Thus, a research on the dewatering process with the use of pressure within 0.58-2.91 MPa and slotted screens with meshes size of 0.1; 0.2 and 0.3 mm were carried out. The analysis of the obtained results indicates that an effective process of dewatering of the investigated digestate takes place at the working pressure to 1.74 MPa regardless the applied screen. Further increase of pressure does not cause a significant decrease of moisture in the investigated material.
Technologie przetwarzania surowców rolniczych, jak i pozostałości produkcyjnych z przemysłu rolno-spożywczego wymagają często przeprowadzenia procesów ich odwadniania. Jednym z takich materiałów jest poferment tj. masa pozostała po procesie biogazyfikacji, która charakteryzuje się dużym uwodnieniem (powyżej 85%). Celem badań było poznanie wpływu ciśnienia odwadniania na zmianę zawartości wody w pofermencie z biogazowni w Piekoszowie. Proces mechanicznego odwadniania przeprowadzono odzwierciedlając warunki pracy pras ślimakowych do odwadniania surowców roślinnych, o średnicy wewnętrznej sita 160 mm. Poznanie wpływu ciśnienia na dynamikę spadku wilgotności surowca, pozwoli na modelowanie pracy urządzeń przemysłowych o podobnych parametrach pracy. W związku z tym przeprowadzono badania procesu odwadniania przy zastosowaniu ciśnienia w zakresie 0,58-2,91 MPa oraz sit szczelinowych o wielkości otworów 0,1; 0,2 oraz 0,3 mm. Przeprowadzona analiza uzyskanych wyników wskazuje, iż efektywny proces odwadniania badanego pofermentu zachodzi przy ciśnieniu roboczym do 1,74 MPa, niezależnie od zastosowanego sita. Dalszy wzrost ciśnienia nie powoduje istotnego spadku wilgotności w badanym materiale.
Źródło:
Agricultural Engineering; 2016, 20, 4; 157-166
2083-1587
Pojawia się w:
Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dielectric Properties of the (CH$\text{}_{3}$NH$\text{}_{3}$)$\text{}_{5}$Bi$\text{}_{2(1- x)}$Sb$\text{}_{2x}$Cl$\text{}_{11}$ Mixed Crystals
Autorzy:
Mróz, J.
Dziedzic, J.
Pykacz, H.
Powiązania:
https://bibliotekanauki.pl/articles/2047087.pdf
Data publikacji:
2006-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
64.70.Kb
Opis:
The (CH$\text{}_{3}$NH$\text{}_{3}$)$\text{}_{5}$Bi$\text{}_{2(1-x)}$Sb$\text{}_{2x}$Cl$\text{}_{11}$ crystals were examined from the point of view of their applicability in pyroelectric detectors. It was shown that they can be useful so far as the construction of infrared detectors is concerned due to high values of both their pyroelectric coefficient and figure of merit p/sqrtε which are both comparable with those of triglycine sulphate crystals.
Źródło:
Acta Physica Polonica A; 2006, 110, 4; 479-483
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies