Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Dobkowska, A." wg kryterium: Autor


Wyświetlanie 1-7 z 7
Tytuł:
Ocena wpływu niezgodności położenia działów wód podziemnych i powierzchniowych na wielkość obliczonych zasobów odnawialnych na przykładzie obszaru bilansowego P-IX w regionie wodnym Warty
Assessment of the influence of discrepancy of the location of groundwater and surface watersheds on the quantity of calculated renewable resources, exemplified by the P-IX balance basin in the Warta water region
Autorzy:
Wieteska, Z.
Dobkowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/2061869.pdf
Data publikacji:
2018
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
metoda hydrologiczna
modelowanie hydrogeologiczne
kaptaż zasobów wód podziemnych
odpływ podziemny
hydrological methods
modelling
groundwater resources capture
groundwater runoff
Opis:
W artykule przedstawiono rezultaty badań odnawialności wód podziemnych systemu wodonośnego, który charakteryzuje znaczna niezgodność położenia wododziałów wód powierzchniowych i podziemnych. Rozpoznanie warunków hydrogeologicznych i hydrologicznych oraz bilans zasobów wód podziemnych sporządzono dla fragmentu obszaru bilansowego P-IX (Warta od Prosny do Kanału Mosińskiego) usytuowanego na południe od rzeki Warty. Obliczenia bilansowe wykonano metodą modelowania matematycznego oraz hydrologiczną. Ponieważ w metodzie hydrologicznej stanowiącej powszechnie stosowaną metodę kontrolną w obliczeniach bilansowych zakłada się, że linie wododziałów wód powierzchniowych i podziemnych są tożsame, porównanie wyników obliczeń bilansowych uzyskanych obiema metodami wymagało przeprowadzenia oceny ich zgodności. Dokonano tego poprzez obliczenie różnicy między wielkościami zasobów odnawialnych wyznaczonych dwoma wariantami metody hydrologicznej. W pierwszym (standardowym) zasoby odnawialne określono na podstawie danych z profili wodowskazowych i hydrometrycznych zamykających zlewnie dopływów Warty drenujących analizowaną jednostkę bilansową. W drugim (rozszerzonym) obliczono na podstawie danych z posterunków kontrolujących zlewnię różnicową Warty. Powiększenie bilansowanej jednostki do granic zlewni różnicowej Warty było zgodne z zasadą, że wiarygodność obliczeń zasobów wód podziemnych rośnie proporcjonalnie do powierzchni bilansowanej zlewni oraz znaczenia jej strefy drenażu w krążeniu regionalnym (Toth, 1963). Wielkość zasobów odnawialnych określona standardowym i rozszerzonym wariantem metody hydrologicznej wyniosła odpowiednio: 107,1 tys. i 184,0 tys. m3/d. Różnica stanowi 72% wartości wyznaczonej metodą standardową. W artykule analizowano ponadto zmienny, w przestrzeni i czasie, charakter związku hydraulicznego wód powierzchniowych i podziemnych oraz wpływ tej zmienności na wiarygodność obliczeń bilansowych, bazujących na stacjonarnych obserwacjach przepływu wód powierzchniowych.
The article presents the results of research on the renewal of a hydrogeological system that is characterized by a significant discrepancy of the location of groundwater and surface watersheds. The area of the hydrological and hydrogeological studies is part of the P-IX balance region (Warta River from the Prosna to the Mosiński Canal) located south of the Warta River. The evaluation of groundwater renewability has been made using a hydrological method and mathematical modelling. When using the hydrological method, which is a commonly used control method for water balance calculations, it is assumed that the surface and groundwater watersheds are identical. Comparison of the results of water balance calculations obtained with both methods required the assessment of the compatibility of the groundwater catchment and morphological boundaries. This was done by calculating the difference between the quantities of renewable resources determined by two variants of the hydrological method. In the first (standard) variant, renewable resources were determined based on data from water-gauge and hydrometric profiles closing the catchments of the Warta tributaries draining the analyzed water-management regions. In the second (extended) method, they were determined based on data from water gauges controlling the Warta sub-basin. Enlargement of the balanced unit as far as the boundaries of the Warta basin was consistent with the principle that the reliability of calculations of groundwater resources increases proportionally to the analyzed catchment area and the significance of its drainage zone in the regional groundwater circulation (Toth, 1963). The quantity of renewable resources determined by the standard and extended variants of the hydrological method amounted to 107,100 m3/day and 184,000 m3/day, respectively. The difference is 72% of the value determined using the standard method. The article also provides an analysis of the spatial and temporal variability of the nature of the hydraulic relationship between surface water and groundwater, and the influence of this variability on the reliability of water balance calculations, based on stationary observations of surface water flow.
Źródło:
Biuletyn Państwowego Instytutu Geologicznego; 2018, 471, Hydrogeologia, z. 15; 185--191
0867-6143
Pojawia się w:
Biuletyn Państwowego Instytutu Geologicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of the Microstructural Evolution on the Corrosion Resistance of Cold Drawn Copper Single Crystals in NaCl
Autorzy:
Koralnik, M.
Dobkowska, A.
Adamczyk-Cieslak, B.
Mizera, J.
Powiązania:
https://bibliotekanauki.pl/articles/353064.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
copper single crystal
microstructure evolution
texture evolution
impedance spectroscopy
potentiodynamic polarization
open circuit potential
Opis:
The aim of the present work was to determine the influence of the microstructural evolution of copper single crystals with the initial orientations of <001> and <111> after cold drawing on their corrosion resistance. Transmission electron microscopy, X-ray diffraction, and electron backscattering diffraction were used to characterize the microstructural changes. To evaluate the corrosion resistance after deformation, open circuit potential, electrochemical impedance spectroscopy, and potentiodynamic polarization analyses were conducted. The microstructural observations showed the presence of dislocation cell structures and shear bands indeformed sample with initial orientation <001> single crystal, as well as a strongly-developed substructure in sample <111>. The material with initial orientation of <001> was more resistive in analyzed medium than material with the initial orientation of <111>.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 1; 55-64
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Development of Rapidly Solidified Magnesium – Copper Ribbons
Autorzy:
Pastuszak, M.
Cieślak, G.
Dobkowska, A.
Mizera, J.
Kurzydłowski, K. J.
Powiązania:
https://bibliotekanauki.pl/articles/958209.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnesium-based alloys
rapid solidification
microstructure
mechanical properties
corrosion properties
Opis:
The aim of the present work was to plan and carry out an experiment consisting of amorphization of industrial magnesium alloy WE 43 (Mg - 4 Y - 3 RE - 0.5 Zr) modified by the copper addition. Investigated alloy modified with 20% of copper was rapidly quenched with the use of melt spinning technique. The effects of cooling rate on the structure and properties of the obtained material were extensively analyzed. The structure and phase analysis of samples were examined using X-ray diffraction method (XRD) while the thermal stability of the samples was determined by differential scanning calorimetry (DSC). Microstructure observations were also conducted. The microhardness tests (HV0.02) and corrosion resistance tests were carried out to investigate the properties of the material. Corrosion resistance measurements were held using a typical three-electrode system. As the result of the research, the effect of cooling rate on microstructure and properties of investigated alloy was determined.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 2B; 1083-1088
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Comparison of the Microstructure and Corrosion Resistance of Sand Cast Aluminum Alloys
Autorzy:
Dobkowska, A.
Adamczyk–Cieślak, B.
Mizera, J.
Kurzydłowski, K. J.
Kiełbus, A.
Powiązania:
https://bibliotekanauki.pl/articles/352870.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminium-silicon-magnesium alloys
microstructure
corrosion
Opis:
The influence of different types of precipitation on the corrosion behavior was investigated in three aluminum-siliconmagnesium alloys. The microstructures of the alloys were studied through optical (OM) and scanning electron microscopy (SEM). The structures consisted of an α-Al solid solution matrix, Si eutectic crystals, secondary phases AlFeSi and AlMgFeSi (Chinese script), as well as Mg2Si. The corrosion behavior was examined with the use of a potentiodynamic polarization test followed by a SEM surface analysis. The results indicate that all the analyzed samples were in the passive state and AlSi10Mg was less reactive in the corrosive environment.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 1; 209-212
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Various Organic Additives in Galvanic Bath on Properties of Ni-SiC Composite Coatings
Autorzy:
Nowak, M.
Mizera, J.
Kłyszewski, A.
Dobkowska, A.
Boczkal, S.
Kozik, A.
Koprowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/357020.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
organic additives
SiC
composite coatings
nickel coatings
zeta potential
Opis:
The paper presents the results of the electrodeposition of nickel composite coatings reinforced with the ceramic SiC particles. A Watts type galvanic bath modified with various organic additives was used. These additives were: 2-sulfobenzoic acid imide (LSA), dioctyl sulfosuccinate sodium salt (DSS), sodium dodecyl sulfate (SDS), tris (hydroxymethyl) aminomethane (THAM) and hexamethyldisilizane (HMDS). The nickel composite coating was electrodeposited on a 2xxx aluminum alloy series substrate (EN-AW 2017) with zinc interlayer. Studies concerned the effect of the applied organic additives on properties of composite coatings such as: microstructure, microhardness, adhesion to the substrate, corrosion resistance and roughness. The structure of the coatings was assessed by scanning electron microscopy and light microscopy. Based on the studies of zeta potential it was found that the bath modification had a significant impact on the amount of the ceramic phase embedded in metal matrix. The tests conducted in a model 0.01 M KCl solution were not fully representative of the true behavior of particles in a Watts bath.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 4; 1327-1333
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nickel Composite Coatings Reinforced Nano SiC Particles
Autorzy:
Nowak, M.
Mizera, J.
Kłyszewski, A.
Dobkowska, A.
Boczkal, S.
Kozik, A.
Koprowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/356955.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanoparticles
organic additives
SiC
composite coatings
nickel coatings
zeta potential
Opis:
The paper presents the results of the electrodeposition of nickel composite coatings reinforced with the nano size SiC ceramic particles. The type and size of the ceramic particles or organic additives used play a important role during electrodeposition processes. A Watts type galvanic bath with various organic additives was used. These additives were: 2-sulfobenzoic acid imide, dioctyl sulfosuccinate sodium salt (DSS), sodium dodecyl sulfate, tris (hydroxymethyl) aminomethane and hexamethyldisilizane. The nickel composite coating was electrodeposited on a 2xxx aluminum alloy series substrate (EN-AW 2017) with zinc interlayer. The work concerns the determination of the impact of the change in the zeta potential of SiC nanoceramic particles used on properties of composite coatings (wear resistance, corrosion, etc.). The paper characterized the composite nickel coatings on aluminum alloy using SEM techniques, wear resistance tests by TABER method and coating adhesion to the substrate using the “scratch test” method. The corrosion resistance of coatings was also tested using electrochemical methods. The research allowed to determine the effect of SiC nanoceramic particle size on the value of the zeta potential in the model KCl solution.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 2; 935-940
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of the magnetic resonance imaging and acoustocerebrography signals in the assessment of focal cerebral microangiopathic lesions in patients with asymptomatic atrial fibrillation. (Preliminary clinical study results)
Autorzy:
Dobkowska-Chudon, W.
Wrobel, M.
Frankowska, E.
Dabrowski, A.
Karlowicz, P.
Zegadlo, A.
Krupienicz, A.
Nowicki, A.
Olszewski, R.
Powiązania:
https://bibliotekanauki.pl/articles/331720.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Akustyczne
Tematy:
ultrasounds
dispersion
brain
atrial fibrillation
stroke
Opis:
Acoustocerebrography (ACG) is a set of techniques designed to capture states of human brain tissue, and its changes. It is based on noninvasive measurements of various parameters obtained by analyzing an ultrasound pulse emitted through the human’s skull. ACG and Magnetic Resonance Imaging (MRI) results were compared in a clinical study assessment of focal white-matter-lesions (WML) in the brains of patients with asymptomatic atrial fibrillation (AAF). The clinical study included 55 patients (age 66.1 ± 6.7 years). According to MRI data, the patients were assigned into four groups depending on the number of lesions: L0 - 0 to 4 lesions, L5 - 5 to 9 lesions, L10 - 10 to 29 lesions, and L30 - 30 or more lesions. As a result, it has been concluded that the ACG method could clearly differentiate the groups L0 (with 0 ÷ 4 lesions) and L30 (with more than 30 lesions) of WML patients. Fisher’s Exact Test shows that this correlation is highly significant (p < 0.001). ACG seems to be a new, effective, method for detecting WML for patients with AAF and can become increasingly useful in both diagnosing, and in stratifying, them. This, in turn, can be helpful in individualizing their treatment, so that the risk of strokes may become essentially reduced.
Źródło:
Hydroacoustics; 2016, 19; 83-92
1642-1817
Pojawia się w:
Hydroacoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies