Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Czyż, K." wg kryterium: Autor


Tytuł:
Przydatność oznaczania wskaźnika kwaśnego steatokrytu u niemowląt chorych na mukowiscydozę
The applicability of acid steatocrit in cystic fibrosis infants
Autorzy:
Filipiak-Wieczorek, Mirosława
Drzymała-Czyż, Sławomira
Walkowiak, Dariusz
Nowak, Jan K.
Woźniak, Dagmara
Walkowiak, Jarosław
Powiązania:
https://bibliotekanauki.pl/articles/762679.pdf
Data publikacji:
2020-04-27
Wydawca:
Polskie Towarzystwo Farmaceutyczne
Tematy:
stężenie tłuszczu w stolcu
wydalanie tłuszczu
suplementacja enzymatyczna
niewydolność zewnątrzwydzielnicza trzustki
faecal fat concentration
faecal fat excretion
enzymatic supplementation
exocrine pancreatic function
Opis:
Background: Steatorrhea, which is a consequence of pancreatic insufficiency, occurs in 85% of patients with cystic fibrosis. In clinical practice, fecal fat concentration is used to diagnose and monitor fecal fat losses. Because compliance with this method is insufficient, new tests are needed. One of the alternatives may be the acid steatocrit. Aim: This study aimed to investigate the value of acid steatocrit in the assessment of fecal fat excretion in pancreatic-insufficient infants with cystic fibrosis: before and after the initiation of pancreatic enzyme supplementation. Patients and methods: The study included 10 infants with cystic fibrosis diagnosed through the newborn screening program and 16 healthy control infants. In all the children, fecal elastase-1, fecal fat concentration (%) and acid steatocrit were measured. Results: Fecal fat concentration in cystic fibrosis infants (range: 14.5%–32,1%) was significantly higher (p<0.0001) compared with control subjects (1.7%–15.1%). Acid steatocrit in cystic fibrosis (19.8%–68.7%) was also greater (p<0.0001) than in the control group (10.7%–22.7%). The area under the receiver operating characteristic curve (ROC) for the 95th percentile of normal values was 0.981 (95% confidence interval: 0.941–1.0) indicating high diagnostic accuracy of acid steatocrit. When acid steatocrit and fecal fat concentration cut-offs were set at 90th and 95th percentile for healthy infants, the specificity of acid steatocrit in detecting elevated fecal fat concentration was 100%, and the sensitivity 80% and 100%, respectively. Conclusions: Compared with the assessment of fecal fat concentration, sensitivity/specificity of acid steatocrit in steatorrhea detection in infants are potentially lower, but still satisfactory. The measurement of acid steatocrit may constitute a useful method of fecal fat concentration assessment in infants identified by the newborn screening program in whom the replacement enzyme therapy has not yet been commenced.
Przedmiot badań: U 85% pacjentów z mukowiscydozą (ang.: cystic fibrosis, CF) stwierdza się niewydolności zewnątrzwydzielniczej trzustki (nzt). Złotym standardem rozpoznawania biegunki tłuszczowej jest ocena stężenia tłuszczu w stolcu. Ze względu na małą akceptowalność tej metody szuka się nowych procedur. Alternatywę może stanowić pomiar wskaźnika kwaśnego steatokrytu (KS). Cel badań: Celem badania była ocena przydatności oznaczania KS w ocenie wydalania tłuszczu w stolcu u niemowląt z CF z nzt, przed włączeniem suplementacji enzymatycznej. Materiał i metody: Do badania włączono 10 niemowląt z CF wykrytą w przesiewie noworodkowym oraz 16 zdrowych niemowląt. U wszystkich dzieci wykonano oznaczenie stężenia elastazy-1 w kale, stężenia tłuszczu (%) w kale w oparciu o metodę Van de Kamera oraz wartości wskaźnika KS. Wyniki: Stężenie tłuszczu w stolcu dzieci z CF wynosiło od 14,5% do 32,1% i było statystycznie większe (p<0,0001) niż w grupie zdrowych niemowląt, w której wynosiło od 1,7% do 15,1%. Wartość wskaźnika KS w grupie badanej mieściła się w zakresie od 19,8% do 68,7% i również była większa niż w grupie kontrolnej (p<0,0001), w której wynosiła od 10,7% do 22,7%. Nie wykazano korelacji między wskaźnikiem KS a stężeniem tłuszczu w stolcu. Pole pod krzywą ROC dla wartości 95 percentyla wartości prawidłowych wynosiło 0,981 (95% przedział ufności: 0,941-1,0) odzwierciedlając dużą wartość diagnostyczną metody oznaczania KS. Wnioski: Pomiar wskaźnika KS dobrze różnicuje grupy niemowląt zdrowych oraz niemowląt chorych na CF z nzt. W porównaniu do metody Van de Kamera, czułość/swoistość oznaczania KS w wykrywaniu biegunki tłuszczowej u niemowląt, jest potencjalnie mniejsza, ale wciąż bardzo zadowalająca. Należy podkreślić prostotę oznaczania KS i możliwość uzyskania wyniku danego dnia. To sprawia, że oznaczenie KS może być przydatną metodą oceny stężenia tłuszczu w stolcu u niemowląt ze skryningu noworodkowego, u których nie włączono jeszcze suplementacji enzymatycznej.
Źródło:
Farmacja Polska; 2020, 76, 3; 156-152
0014-8261
2544-8552
Pojawia się w:
Farmacja Polska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the content of impurities and greasy on the results of heat resistance and hair cover dielectricity on the basis of wool from Huacaya alpaca and Racka sheep
Wpływ zawartości zanieczyszczeń i tłuszczopotu na wyniki ciepłochronności i dielektryczność włosa na podstawie wełny z alpaki huacaya i owcy rackiej
Autorzy:
Cholewińska, P.
Michalak, M.
Wyrostek, A.
Czyż, K.
Łuczycka, D.
Powiązania:
https://bibliotekanauki.pl/articles/2082385.pdf
Data publikacji:
2019
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
impedance
heat resistance
dielectic
wool
Huacaya alpaca
Racka sheep
Opis:
Infl uence of the content of impurities and grease on the results of heat resistance and hair cover dielectricity on the basis of wool from Huacaya alpaca and Racka sheep. In recent years, the test method has become more and more popular by defi ning the electrical characteristics of various materials. The test is based on the difference in characteristic of the material in the electromagnetic fi eld, which is described by the level of resistance or dielectric properties of the test material. The use of phenomena related to current fl ow and resistance makes it possible to evaluate the material being tested. Determination of the material quality by this method shows differences at molecular level, which makes it more accurate than in the case of traditional methods. The study investigated the effect of impurities and grease content on the results of heat resistance and dielectricity on hair cover on the basis of wool from Huacaya alpaca and Hungarian’s Racka sheep. Studies have shown that washed wool has a better dielectric strength than greasy wool, as it has a higher resistance (P < 0.05). Wool from the Racka sheep contained more organic, organic matter and grease than alpaca wool, so the heat insulation of sheep was higher than in alpaca. Research has also shown that greasy matter together with non-organic and organic infl uences the results of electric characteristics testing, reducing wool resistance of the tested species. Wool wash affected the level of heat resistance of sheep wool and alpaca wool (P < 0.05). To conclude, washed wool is a better dielectric, which has a more positive effect on the skin coatings of people wearing clothes. However, wool washing causes a decrease in the thermal insulation of the wool.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Animal Science; 2019, 58[1]; 5-12
1898-8830
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Animal Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Crystallization of FeSiB Amorphous Ribbons Induced by Laser Interference Irradiation
Autorzy:
Kusinski, J.
Czyż, O.
Radziszewska, A.
Morgiel, J.
Ostrowski, R.
Strzelec, M.
Czyż, K.
Rycyk, A.
Powiązania:
https://bibliotekanauki.pl/articles/379811.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
laser interference heating
FeSiB alloy
amorphous alloy
scanning electron microscopy
transmission electron microscopy
stop FeSiB
stop amorficzny
skaningowa mikroskopia elektronowa
transmisyjna mikroskopia elektronowa
Opis:
Detailed studies on the effects of pulsed laser interference heating on surface characteristics and subsurface microstructure of amorphous Fe80Si11B9 alloy are reported. Laser interference heating, with relatively low pulsed laser energy (90 and 120 mJ), but with a variable number (from 50-500) of consecutive laser pulses permitted to get energy accumulation in heated areas. Such treatment allowed to form two- Dimensional micro-islands of laser-affected material periodically distributed in amorphous matrix. The crystallization process of amorphous FeSiB ribbons was studied by means of scanning and transmission electron microscopy. Detailed microstructural examination showed that the use of laser beam, resulted in development of nanostructure in the heated areas of the amorphous ribbon. The generation of nanocrystalline seed islands created by pulsed laser interference was observed. This key result may evidently give new knowledge concerning the differences in microstructure formed during the conventional and lased induced crystallization the amorphous alloys. Further experiments are needed to clarify the effect of pulsed laser interference crystallization on magnetic properties of these alloys.
Źródło:
Archives of Foundry Engineering; 2018, 18, 2; 27-30
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza okrywy włosowej kotów domowych ze szczególnym uwzględnieniem budowy histologicznej
Analysis of the hair coat of domestic cats with special focus on histological structure
Autorzy:
Wyrostek, A.
Roman, K.
Czyz, K.
Janczak, M.
Patkowska-Sokola, B.
Powiązania:
https://bibliotekanauki.pl/articles/843564.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Zootechniczne
Tematy:
kot domowy
okrywa wlosowa
wlosy puchowe
wlosy osciste
wlosy kierunkowe
budowa histologiczna
Źródło:
Roczniki Naukowe Polskiego Towarzystwa Zootechnicznego; 2017, 13, 1
1733-7305
Pojawia się w:
Roczniki Naukowe Polskiego Towarzystwa Zootechnicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of noise generated by driving set of autogyro using an acoustic camera
Autorzy:
Magryta, P.
Skiba, K.
Czyż, Z.
Powiązania:
https://bibliotekanauki.pl/articles/103388.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
autogyro
noise
acoustic camera
Noise Inspector software
Opis:
The article discusses the advantages of using an acoustic camera to analyze noise distribution. Location of noise sources was based on example of an autogyro model. Tests were performed using a 16-microphone acoustic camera using Noise Inspector software. Acoustic maps and sound power levels for two aircraft operations conditions were obtained. The results obtained during the various states of the model work were compared.
Źródło:
Advances in Science and Technology. Research Journal; 2017, 11, 4; 247-251
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling a fuel injector for a two-stroke diesel engine
Autorzy:
Sochaczewski, R.
Czyż, Z.
Siadkowska, K.
Powiązania:
https://bibliotekanauki.pl/articles/133849.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel engine
two-stroke
fuel injector
modeling
silnik diesla
silnik dwusuwowy
wtryskiwacz paliwowy
modelowanie
Opis:
This paper discusses the modeling of a fuel injector to be applied in a two-stroke diesel engine. A one-dimensional model of a diesel injector was modeled in the AVL Hydsim. The research assumption is that the combustion chamber will be supplied with one or two spray injectors with a defined number of nozzle holes. The diameter of the nozzle holes was calculated for the defined options to provide a correct fuel amount for idling and the maximum load. There was examined the fuel mass per injection and efficient flow area. The studies enabled us to optimize the injector nozzle, given the option of fuel injection into the combustion chamber to be followed.
Źródło:
Combustion Engines; 2017, 56, 3; 147-153
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bezpośrednia laserowa litografia interferencyjna w periodycznej obróbce biomateriałów
Direct laser interference lithography in periodical treatment of biomaterials
Autorzy:
Czyż, K.
Strzelec, M.
Marczak, J.
Rycyk, A.
Sarzyński, A.
Major, R.
Patron, Z.
Jach, K.
Świerczyński, R.
Warchulak, P.
Garbacz, H.
Powiązania:
https://bibliotekanauki.pl/articles/208791.pdf
Data publikacji:
2016
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
inżynieria materiałowa
mikroobróbka laserowa
litografia interferencyjna
stopy tytanu
warstwy diamentopodobne
biomateriały
materials engineering
laser micromachining
interference lithography
titanium alloys
diamond-like carbon layers
biomaterials
Opis:
W artykule przedstawiono wyniki badań nowoczesnej technologii mikroobróbki laserowej biomateriałów opartej na wykorzystaniu interferencji impulsowych wiązek laserowych o dużej energii. Przeanalizowano wpływ polaryzacji promieniowania na formę wzorów w obrazie interferencyjnym. Eksperymentalnie wyznaczono wartości progów ablacji laserowej dla tytanu i warstw diamentopodobnych. W serii eksperymentów potwierdzono szczególne zalety metody bezpośredniej interferencyjnej litografii laserowej w periodycznej modyfikacji powierzchni dla uzyskania różnych jej topografii, włącznie ze strukturami hierarchicznymi, o różnym okresie i wymiarach wzorów. Opisano zastosowania tej technologii do kształtowania powierzchni materiałów wszczepialnych oraz rusztowań dla hodowli komórek i tkanek w bioinżynierii.
The paper presents the results of research on modern laser micromachining technology based on utilization of the interference field of high energy, pulse laser beams. The influence of radiation polarization on a pattern shape in an interference image has been analyzed theoretically. Values of laser ablation threshold for titanium and diamond-like coatings were determined experimentally. The particular advantages of the direct laser interference lithography method have been shown in a series of tests devoted to the periodical surface topography modification, including creation of hierarchical structures with different periods and feature dimensions. Another trial of tests has confirmed also the application potential of this technique in shaping of implant surfaces as well as preparation of scaffolds for cells and tissues culturing in bioengineering.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2016, 65, 4; 31-53
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka okrywy włosowej konika polskiego i konia huculskiego z uwzględnieniem właściwości fizycznych oraz budowy histologicznej różnych rodzajów włosów
Characterization of the hair coat of the Polish Konik and Hucul pony focusing on the physical features and histological structure of different hair types
Autorzy:
Roman, K.
Wyrostek, A.
Czyz, K.
Janczak, M.
Patkowska-Sokola, B.
Powiązania:
https://bibliotekanauki.pl/articles/843946.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Zootechniczne
Tematy:
konie
koniki polskie
konie huculskie
okrywa wlosowa
wlosy
cechy fizyczne
budowa histologiczna
Opis:
Celem badań była analiza porównawcza okrywy włosowej konika polskiego i konia huculskiego, ze szczególnym uwzględnieniem budowy histologicznej oraz parametrów fizycznych włosów. Włosy do badań pochodziły od 20 klaczy, po 10 z każdej rasy. Próby włosów zostały pobrane w okresie zimowym, z boku kłody, grzywy, ogona oraz szczotek. Włosy z boku kłody zostały podzielone na frakcję pokrywową i puchową. U obu ras zaobserwowano większy procentowy udział włosów puchowych (ok. 70%) w stosunku do włosów pokrywowych (ok. 30%). Włosy pokrywowe konika polskiego były o ok. 50% dłuższe w porównaniu do włosów konia huculskiego, natomiast długość włosów puchowych nie różniła się istotnie pomiędzy rasami. Zarówno włosy pokrywowe, jak i puchowe konika polskiego były o ok. 25% grubsze w porównaniu do włosów konia huculskiego. Zdolność do wydłużenia poszczególnych rodzajów włosów nie różniła się istotnie pomiędzy rasami. Najmniejsze wydłużenie (ok. 45%) stwierdzono dla włosów szczotek, natomiast największe (ok. 55%) – dla włosów grzywy. Budowa histologiczna kutikuli włosów nie wykazała różnic między analizowanymi rasami koni.
The aim of the study was a comparative analysis of the hair coat of the Polish Konik and Hucul pony, focusing on the histological structure and physical parameters of the hair. Hair samples were obtained from 20 mares—10 of each breed. They were collected in winter, from the side of barrel, the mane, the tail, and front and rear fetlock. The hairs from the barrel were divided into overhair and underhair fractions. A higher percentage of underhair (about 70%) as compared to overhair (30%) was noted in both breeds. The overhair of the Polish Konik was about 50% longer than that of the Hucul pony, while the length of underhair did not differ between breeds. Both the overhair and the underhair of the Polish Konik were about 25% thicker than that of the Hucul pony. Elongation of particular types of hair did not differ significantly between the breeds. It was lowest for fetlock hair (about 45%) and highest for mane hair (about 55%). The histological structure of the cuticle layer of the hair did not differ between breeds.
Źródło:
Roczniki Naukowe Polskiego Towarzystwa Zootechnicznego; 2016, 12, 4
1733-7305
Pojawia się w:
Roczniki Naukowe Polskiego Towarzystwa Zootechnicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The expression of HBV antigens in transgenic lettuce micropropagated in vitro cultures for the purpose of anti-HBV vaccine
Autorzy:
Czyz, M.
Wyrwa, K.
Bociag, P.
Dembczynski, R.
Marecik, R.
Krajewski, P.
Kapusta, J.
Pniewski, T.
Powiązania:
https://bibliotekanauki.pl/articles/951182.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
conference
hepatitis B virus
vaccine
vaccination
vaccine production
antigen expression
micropropagation
transgenic plant
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2015, 96, 1
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ nawożenia odpadami pofermentacyjnymi z biogazowni na zawartość biomasy żywych drobnoustrojów w glebie
The effect of fertilization with fermentation wastes from biogas plant on the content of live microbial biomass in soil
Autorzy:
Cybulska, K.
Wrońska, I.
Kitczak, T.
Dłużewska, J.
Mahdi-Oraibi, S.
Czyż, H.
Powiązania:
https://bibliotekanauki.pl/articles/338531.pdf
Data publikacji:
2015
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
gleba
odpad pofermentacyjny
trawy
zawartość biomasy żywych mikroorganizmów
content of live microbial biomass
fermentation wastes
grasses
soil
Opis:
W pracy przedstawiono wpływ nawożenia gleby odpadem pofermentacyjnym, pochodzącym z biogazowni rolniczej, na zawartość biomasy żywych mikroorganizmów. Analizy laboratoryjne przeprowadzono na próbkach glebowych pobranych z poletek doświadczalnych Zachodniopomorskiego Uniwersytetu Technologicznego w Szczecinie, na których wysiano dwie kombinacje mieszanek traw: M1 – kostrzewa czerwona (Festuca rubra L.), wiechlina łąkowa (Poa pratensis L.), życica trwała (Lolium perenne L.) i M2 – kostrzewa trzcinowata (Festuca arundinacea Schreb.), kostrzewa czerwona (Festuca rubra L.), kostrzewa owcza (Festuca ovina L.), życica trwała (Lolium perenne L.). Badania przeprowadzono w latach 2011 i 2014. Z analizy otrzymanych danych wynika, że na badany wskaźnik biologiczny miał wpływ skład gatunkowy wysianej mieszanki traw oraz intensywność rozkładu odpadu pofermentacyjnego w środowisku glebowym. Na podstawie uzyskanych wyników stwierdzono, że zawartość biomasy żywych drobnoustrojów po pięciu miesiącach od zastosowania pulpy pofermentacyjnej pod uprawą mieszanki traw M2 była większa niż pod uprawą mieszanki traw M1. Wykazano, że po 3 latach od założenia doświadczenia zawartość biomasy żywych mikroorganizmów w glebie zmniejszyła się, za wyjątkiem gleby pochodzącej z poletka obsianego mieszanką M1 nienawożonej odpadem, gdzie utrzymała się na zbliżonym poziomie.
The study shows the effect of fertilization with fermentation wastes from agriculture biogas plant on the content of live microbial biomass in soil. Soil samples collected from experimental plots of the West Pomeranian University of Technology in Szczecin were analysed. The combination of two grass mixtures was sown on the experimental plot. Analyses were made in 2011 and 2014. The results showed that the microbial biomass in soil was affected by specific composition of planted grass mixtures and the intensity of decay of fermentation wastes in the soil environment. Five months after the application of post-fermentation wastes, the content of live microbial biomass in soil was bigger under the M2 grass mixture (Festuca arundinacea, Festuca rubra, Festuca ovina and Lolium perenne) than under the M1 mixture (Festuca rubra, Poa pratensis and Lolium perenne). Three years after the beginning of the experiment, the content of live microbial biomass was reduced except in soil sown with the grass mixture M1 without the application of fermentation wastes, where it remained constant.
Źródło:
Woda-Środowisko-Obszary Wiejskie; 2015, 15, 1; 28-36
1642-8145
Pojawia się w:
Woda-Środowisko-Obszary Wiejskie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bezpośrednie laserowe wytwarzanie struktur periodycznych metodą litografii interferencyjnej
Creating of periodic structures with direct laser interference litography
Autorzy:
Czyż, K.
Rycyk, A.
Strzelec, M.
Sarzyński, A.
Marczak, J.
Powiązania:
https://bibliotekanauki.pl/articles/160244.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
Tematy:
bezpośrednia litografia interferencyjna
bezpośrednie strukturowanie powierzchni
inżynieria powierzchni
materiały biozgodne
struktury periodyczne
direct interference litography
direct surface structuring
surface engineering
biosuitable materials
periodic structures
Opis:
W pracy przedstawiono metodę bezpośredniej, laserowej litografii interferencyjnej do modyfikacji przypowierzchniowej warstwy materiałów. Zmiana topografii oraz mikrostruktury powierzchni prowadzi do wielu korzystnych zmian właściwości materiału, poczynając od zmian typowo mechanicznych, takich jak zmiana współczynnika tarcia, po zmiany właściwości optycznych, magnetycznych i innych. W artykule opisano dwukanałowy impulsowy układ laserowy na krysztale Nd:YAG z Q-modulacją, generujący impulsy o czasie trwania 8-10 ns oraz energii 1,5 J w każdym kanale. Laser służył do naświetlania struktur interferencyjnych na powierzchni różnych materiałów. Ramiona dwukanałowego układu laserowego stanowiły jednocześnie interferometr Macha-Zehndera. Zaprezentowano również wybrane struktury periodyczne jedno- oraz dwuwymiarowe, wytworzone w warunkach impulsowego naświetlania powierzchni metali, półprzewodników, polimerów oraz tzw. warstw diamentopodobnych. We wnioskach przedyskutowano potencjalne obszary zastosowania technologii bezpośredniej, laserowej litografii interferencyjnej.
In this article a direct laser interference lithography method is described. This method is one of the best solutions for top surface of material modifications – changes of topography and microstructure. These changes lead to many beneficial modifications of material properties from mechanical ones like change of friction coefficient to change of optical or magnetic properties etc. In the article we introduce laser system based on Nd:YAG crystal with Q-modulation, generating pulses of 8-10 ns duration with maximal energy 1,5 J in each channel. The laser was used to produce interference structures on surfaces of photo-active materials. Two chanels of interferometer laser system make simultaneously Mach-Zehnder interferometer. We intruduce periodical structures (1D and 2D) created on surfa ces of polimers, metals, and DLC type surfaces. In the conclusion, possibile practical applications of manufactured structures are shown.
Źródło:
Prace Instytutu Elektrotechniki; 2014, 266; 99-113
0032-6216
Pojawia się w:
Prace Instytutu Elektrotechniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CFD model of the CNG direct injection engine
Autorzy:
Czyż, Z.
Pietrykowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/957987.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
simulation and modeling
gas injection
methane injection
direct injection
Opis:
The paper presents CFD analysis of fuel flow in the CNG injector. The issues such a pressure drop along an injector channel, mass flow through the key sections of the injector geometry, flow rates, the impact of the needle shape on the deflection of the sprayed gas cone and the impact of the wall head are analyzed in the article. The simulation was made in the transient states conditions for full injection process, including the opening and closing of the injector. An injection time of 6 ms, velocity of 0.33 mm/ms and a lift of 0.5 mm were selected for opening and closing of injector based on experimental test. The simulation shows that the volume inside the injector is a kind of fuel accumulator, and the opening process of the needle influence the flow parameters in an inlet cross-section after a certain time, depending on a channel cross section. The calculations allowed to select the ratio of an injector duct cross sectional area to the aperture area of the injection capable of the reducing pressure loss. The unusual location of the injector in the socket of a glow plug in the Andoria ADCR engine makes a stream be impaired by a part of the head. This research result would be useful in developing an injector construction which will be used for an investigation of CNG addition into diesel engine.
Źródło:
Advances in Science and Technology. Research Journal; 2014, 8, 23; 45-52
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laser interference patterning of diamond-like carbon layers for directed migration and growth of smooth muscle cell depositions
Autorzy:
Marczak, J.
Kusinski, J.
Major, R.
Rycyk, A.
Sarzynski, A
Strzelec, M.
Czyz, K
Powiązania:
https://bibliotekanauki.pl/articles/174984.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
laser interference lithography
Nd
YAG laser
diamond-like carbon (DLC) structuring
biocompatible scaffolds
Opis:
Seeding of cells on functional, biocompatible scaffolds is a crucial step in achieving the desired engineered tissue. The authors show the constructional solutions of the Nd:YAG pulse laser system with the Q-switch modulation for direct and interferential shaping of the surface of biocompatible materials. The two-channel interference system is distinguished by high control, simplicity and repetitiveness regarding laser energy level and dimensions of the surface structures. The experiments were conducted on hard, biocompatible substrates of amorphous carbon (diamond-like carbon, DLC) and were preliminarily tested on smooth muscle cell depositions.
Źródło:
Optica Applicata; 2014, 44, 4; 575-586
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Układ aktywnej redukcji hałasu pracujący pod kontrolą systemu uClinux
Active Noise Control running under uClinux
Autorzy:
Czyż, K.
Zając, T.
Powiązania:
https://bibliotekanauki.pl/articles/156647.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
aktywna redukcja hałasu
systemy sterowania
systemy wbudowane
active noise control
control systems
digital signal processing
discrete-time systems
embedded systems
Opis:
Idea Aktywnej Redukcji Hałasu (ARH) jest związana z redukcją niepożądanego niskoczęstotliwościowego dźwięku, w rezultacie tworzona jest przestrzenna strefa ciszy wokół wybranego mikrofonu. Artykuł opisuje praktyczną implementacje systemu ARH pracującego pod kontrolą systemu operacyjnego uClinux na dwurdzeniowym procesorze sygnałowym Blackfin firmy Analog Devices. System operacyjny uClinux okazuje się być tanim, dynamicznym środowiskiem rozwojowym dla procesorów sygnałowych Blackfin, dodatkowo wykorzystując wielordzeniowe procesory jest możliwe pokonanie głównej wady Linux'a mianowicie braku funkcjonalności systemu operacyjnego czasu rzeczywistego niezbędnej do zastosowań przetwarzania sygnałów. Można to osiągnąć poprzez oddzielenie kodu który musi być wykonywany w czasie rzeczywistym i uruchamianie go na osobnym rdzeniu podczas gdy drugi rdzeń jest wykorzystywany przez systemem operacyjny Linux. Zastosowanie systemu operacyjnego Linux w implementacji układu ARH przynosi szereg korzyści zwłaszcza zwiększa możliwości rozwoju i debuggingu oprogramowania, Linux daje również dostęp do ogromnej ilości otwartego oprogramowania. W prezentowanym rozwiązaniu w oparciu o system operacyjny Linux stworzono aplikację integrującą funkcje webserwera z układem aktywnej redukcji hałasu, dynamicznie tworzone strony internetowe tworzą graficzny interfejs użytkownika systemu ARH dostępny poprzez przeglądarkę internetową.
The idea of ANC is concerned with attenuation of unwanted low frequency sound (noise). As a result, a three-dimensional zone of quiet is created around the selected microphones. The paper describes ANC system implementation running under the uClinux system on dual core Analog Devices Blackfin DSP. The uClinux is proving to be a low-cost, dynamic development environment. On multi-core Blackfin DSPs, it is possible to overcome the main disadvantage of Linux - lack of hard-real time functionality indispensable for signal processing applications. It can be achieved by separation of the real-time signal processing code and handling it on a dedicated core, while the other core is running Linux. Such a solution offers advantages to designers, most notably by opening up a wide range of applications, drivers and protocols which often are open-source or free software. In most cases, only a compilation or some minor tweaking is necessary to get that software up and running. The advantages for using Linux in the ANC system are ease of use, better system control, easy possibility of creating web based user interfaces and improved debugging capabilities. In this particular application, use of Linux enables a Web server integration into the ANC system. Dynamically created web pages can be accessed by any web browser and become the graphical user interface to the ANC system.
Źródło:
Pomiary Automatyka Kontrola; 2011, R. 57, nr 1, 1; 33-35
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ ogrzewania w temperaturze 180°C na paramagnetyczne właściwości diklofenaku - badania EPR
Effect of heating at 180°C on paramagnetic properties of diclofenac - EPR studies
Autorzy:
Ramos, P.
Pilawa, B.
Wilczyński, S.
Czyż, K.
Adamczyk, J.
Powiązania:
https://bibliotekanauki.pl/articles/284672.pdf
Data publikacji:
2009
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
diklofenak
centra paramagnetyczne
wolne rodniki
spektroskopia EPR
diclofenac
paramagnetic centers
free radicals
EPR spectroscopy
Opis:
Przeprowadzono badania wolnych rodników powstających w diklofenaku podczas ogrzewania w temperaturze 180°C. Jako technikę badawczą zastosowano spektroskopię elektronowego rezonansu paramagnetycznego (EPR). Dla wyjściowej próbki diklofenaku nie poddanego obróbce termicznej nie obserwowano widm EPR. Asymetryczne linie EPR rejestrowano natomiast w przypadku ogrzewanego diklofenaku. Zbadano wpływ czasu przechowywania na właściwości i koncentrację wolnych rodników w ogrzewanym diklofenaku. Stwierdzono, że w diklofenaku poddanym obróbce termicznej występuje duża ilość wolnych rodników (∼10(19) spin/g). Koncentracja wolnych rodników w ogrzewanym diklofenaku rośnie podczas przechowywania próbki. Oddziaływania wolne rodniki - tkanki mogą być odpowiedzialne za efekty toksyczne w organizmie oraz zmiany struktury biomateriałów. Obróbkę termiczną w przypadku diklofenaku należy więc odrzucić jako metodę sterylizacji leku. W pracy opisano wpływ mocy mikrofalowej na kształt, amplitudę i szerokość linii EPR dikofenaku. Metodą ciągłego nasycenia mikrofalowego linii EPR wykazano, że w diklofenaku zachodzą wolne procesy relaksacji spin-sieć.
Electron paramagnetic resonance (EPR) examinations of free radicals formed in diclofenac heated at 180°C were performed. EPR spectrum for the non-heated sample was not obtained. Asymmetrical EPR lines were measured for the studied heated drug. Properties and free radicals concentration in heated diclofenac during storage of the sample were studied. High amount of free radicals (∼10(19) spin/g) characterizes diclofenac after heating of the sample. Free radicals concentration in heated diclofenac increases with increasing storage time of the sample. Free radicals - tissues interactions may be accompanied by toxic effects in organisms and changes of biomaterial's structure, so thermal sterilization is rather rejected as sterlization process for diclofenac. Influence of microwave power on lineshape, amplitudes and linewidth of EPR spectra was described. Continuous microwave saturation of EPR lines points out that slow spin-lattice relaxation processes exist in the heated diclofenac.
Źródło:
Engineering of Biomaterials; 2009, 12, 87; 7-12
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies