Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Chung, S." wg kryterium: Autor


Wyświetlanie 1-9 z 9
Tytuł:
DLC Coatings by $PI^{3}D:$ Low-Voltage žersus High-Voltage Biasing
Autorzy:
Ryoo, H.
Nikiforov, S.
Rim, G.
Shenderey, S.
Oh, H.
Chung, S.
Powiązania:
https://bibliotekanauki.pl/articles/1807961.pdf
Data publikacji:
2009-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
52.77.Dq
68.35.Gy
68.55.-a
78.30.-j
Opis:
Diamond-like carbon (DLC), in particular hydrogenated amorphous carbon (a-C:H) films have been formed on various conductive and dielectric materials by plasma immersion ion implantation and deposition $(PI^{3}D)$ processing. Effect of pulse voltage and other process parameters on the film properties was investigated. It was found that for conductive substrates, a low-voltage ( ≈1 kV), high repetition rate pulsing provides better overall film performance comparing to that obtained by applying higher voltages, which is also favourable for conformal treatment of 3D workpieces. However, short 1-2 μs, high-voltage 5-20 kV pulses are required for dielectric workpieces several millimeter thick. Good film adhesion was achieved by forming a Si-containing buffer layer using hexamethyldisiloxane (HMDSO) as a precursor and a low-voltage pulsing. Roughness and wettability of DLC coatings was found to be controlled by varying the bias specs and sample temperature. Very smooth films with average roughness less than 1 Å were prepared at optimised process parameters.
Źródło:
Acta Physica Polonica A; 2009, 115, 6; 1146-1148
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Establishment of feline in-house reference intervals for hematologic and biochemical parameters and potential age-related differences
Autorzy:
Lin, T.L.
Chung, S.H.
Sung, C.H.
Yeh, S.Y.
Cheng, T.L.
Chou, C.C.
Powiązania:
https://bibliotekanauki.pl/articles/2087480.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
feline
reference interval
age
transference study
Źródło:
Polish Journal of Veterinary Sciences; 2019, 3; 599-608
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of External Load at Varying Hand Positions on Perceived Discomfort
Autorzy:
Kee, D.
Na, S.
Chung, M. K.
Powiązania:
https://bibliotekanauki.pl/articles/90584.pdf
Data publikacji:
2013
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
perceived discomfort
postural stress
external load
hand position
pozycja przy pracy
pozycja ręki
dyskomfort
obciążenie zewnętrzne
Opis:
The purpose of this study was to assess the effect of external load at varying hand positions on discomfort, and to provide a new classification of external load. An experiment was carried out in which 16 postures with an external load of 0, 1.5, 3 kg were tested. The postures were controlled by 2 independent variables of hand distance and hand height. The subjects were instructed to rate their perceived discomfort with magnitude estimation after holding a given posture for 1 min. Analysis of variance (ANOVA) exhibited that the main effects of the 3 independent variables were statistically significant for discomfort. Discomfort increased linearly with external load and hand distance. Hand height showed a quadratic relation with discomfort, which exhibited a slightly different trend from hand distance and external load. Based on the results, a new classification of external load was proposed with 3 classes grouped by perceived discomfort.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2013, 19, 3; 397-408
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Image Processing to Predict Compressive Behavior of Aluminum Foam
Autorzy:
Kim, S.
Chung, H. J.
Rhee, K.
Powiązania:
https://bibliotekanauki.pl/articles/357032.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum foam
compute tomography (CT) image
finite element method (FEM)
Opis:
An image processing technique was used to model the internal structure of aluminum foam in finite element analysis in order to predict the compressive behavior of the material. Finite element analysis and experimental tests were performed on aluminum foam with densities of 0.2, 0.25, and 0.3 g/cm3. It was found that although the compressive strength predicted from the finite element analysis was higher than that determined experimentally, the predicted compressive stress-strain curves exhibited a tendency similar to those determined from experiments for both densities. However, the behavior of the predicted compressive stress-strain curves was different from the experimental one as the applied strain increased. The difference between predicted and experimental stress-strain curves in a high strain range was due to contact between broken aluminum foam walls by the large deformation.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 2A; 635-640
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Joining Of Green Body And Dense Substrate For Indium Tin Oxide Under Uniaxial Pressure In An Open Condition
Łączenie zielonej masy i gęstego podłoża z tlenku cyny indu w warunkach jednoosiowego ściskania w stanie otwartym
Autorzy:
Moon, G.-S.
Chung, T.-J.
Yang, S. H.
Hong, G.-S.
Oh, K.-S.
Powiązania:
https://bibliotekanauki.pl/articles/355654.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
transparent conducting oxide
indium tin oxide
green body
joining
tlenek indu
zielona masa
łączenie
Opis:
The green body and dense substrate of indium tin oxide was joined by uniaxially pressing at 0.3 MPa at 1300°C to test the restoring of the eroded part of transparent conducting oxide target. The green body was sintered to 98% of theoretical density under the suppression of shrinkage along the boundary below 5%. The boundary between two parts was free of pore but could be recognized from the difference in grain sizes. The joined part had the virtually same density with the substrate, but the grain size was less than one fifth compared with that of substrate.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1209-1212
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Novel Extraction Process Of Rare Earth Elements From NdFeB Powders Via Alkaline Treatment
Nowy sposób ekstrakcji pierwiastków ziem rzadkich z proszków NdFeB w roztworach alkalicznych
Autorzy:
Chung, K. W.
Kim, C.-J.
Yoon, H.-S.
Powiązania:
https://bibliotekanauki.pl/articles/355324.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
recycling
NdFeB magnet
alkaline treatment
leaching
selective leaching efficiency
recykling
magnes neodymowy
obróbka alkaliczna
ługowanie
wydajność
Opis:
The alkaline treatment of NdFeB powders in NaOH solution at various equivalent amounts of NaOH at 100°C was performed. The resultant powders were then leached in 0.5M H2SO4 solution at 25°C for 2 minutes. At 5 equivalents of NaOH, neodymium in NdFeB powders was partially transformed to neodymium hydroxide. The transformation of neodymium to neodymium hydroxide actually occurred at 10 equivalents of NaOH and was facilitated by increasing the equivalent of NaOH from 10 to 30. In addition, iron was partially transformed to magnetite during the alkaline treatment, which was also promoted at a higher equivalent of NaOH. The leaching yield of neodymium from alkaline-treated powders was increased with an increasing equivalent of NaOH up to 10; however, it slightly decreased with the equivalent NaOH of over 10. The leaching yield of iron was inversely proportional to that of rare earth elements. NdFeB powders treated at 10 equivalents of NaOH showed a maximum leaching yield of neodymium and dysprosium of 91.6% and 94.6%, respectively, and the lowest leaching yield of iron of 24.2%, resulting in the highest selective leaching efficiency of 69.4%.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1301-1305
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation Of Fine Grained SiC At Reduced Temperature By Two-Step Sintering
Wytwarzanie drobnoziarnistego SiC w obniżonej temperaturze przez dwuetapowe spiekanie
Autorzy:
Kim, K.-W.
Oh, K.-S.
Lee, H.
Kim, B. S.
Chung, T.-J.
Powiązania:
https://bibliotekanauki.pl/articles/353772.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
SiC
liquid phase
two step sintering
coarsening
hardness
faza ciekła
spiekanie dwuetapowe
odporność
twardość
Opis:
Two-step sintering route was applied for the densification SiC by promoting the role of liquid phase. The specimen contained 8 vol% of liquid phase composed of Al2O3 and Y2O3. The heating schedule consisted with initial rapid heating to 2000°C and immediate quenching to 1700 or 1750°C. By heating at elevated temperature, even distribution of the liquid phase was intended. The heat treatment at reduced temperature was to suppress the evaporative loss of the liquid and to secure the time for densification. The two-step sintering effectively suppressed loss of mass and coarsening. The resultant SiC was thus dense and was composed of fine grains exhibiting hardness of 2321 kgf/mm2.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1539-1542
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exchange Coupling in Magnetic Semiconductor Multilayers and Superlattices
Autorzy:
Furdyna, J.
Leiner, J.
Liu, X.
Dobrowolska, M.
Lee, S.
Chung, J.
Kirby, B.
Powiązania:
https://bibliotekanauki.pl/articles/1426668.pdf
Data publikacji:
2012-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.Pp
61.05.fj
75.47.De
75.70.Cn
Opis:
The study of ferromagnetic semiconductors continues to be of great interest because of their potential for spintronic devices. While there has been much progress in our understanding of ferromagnetic semiconductor materials - particularly of the canonical III-V system $Ga_{1-x}Mn_xAs$ - many issues still remain unresolved. One of these is the nature of interlayer exchange coupling in GaMnAs-based multilayers, an issue that is important from the point of view of possible spintronic applications. In this connection, it is important to establish under what conditions the interlayer exchange coupling between successive GaMnAs layers is antiferromagnetic or ferromagnetic, since manipulation of such interlayer exchange coupling can then be directly applied to achieve giant magnetoresistance and other devices based on this material. In this review we will describe magneto-transport, magnetization, and neutron reflectometry experiments applied to two types of GaMnAs-based multilayer structures - superlattices and tri-layers - consisting of GaMnAs layers separated by non-magnetic GaAs spacers. These measurements serve to identify conditions under which AFM coupling will occur in such GaMnAs/GaAs multilayer systems, thus providing us the information which can be used for manipulating magnetization (and thus also giant magnetoresistance) in structures based on the ferromagnetic semiconductor GaMnAs.
Źródło:
Acta Physica Polonica A; 2012, 121, 5-6; 973-980
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies