Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Chen, J.Y." wg kryterium: Autor


Tytuł:
Traffic fatalities prediction based on support vector machine
Autorzy:
Li, T.
Yang, Y.
Wang, Y.
Chen, C.
Yao, J.
Powiązania:
https://bibliotekanauki.pl/articles/223743.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
traffic accident
support vector machine
SVM
particle swarm optimization (PSO)
PSO
prediction model
optimal parameters
wypadek drogowy
Particle Swarm Optimization
model prognostyczny
optymalne parametry
Opis:
To effectively predict traffic fatalities and promote the friendly development of transportation, a prediction model of traffic fatalities is established based on support vector machine (SVM). As the prediction accuracy of SVM largely depends on the selection of parameters, Particle Swarm Optimization (PSO) is introduced to find the optimal parameters. In this paper, small sample and nonlinear data are used to predict fatalities of traffic accident. Traffic accident statistics data of China from 1981 to 2012 are chosen as experimental data. The input variables for predicting accident are highway mileage, vehicle number and population size while the output variables are traffic fatality. To verify the validity of the proposed prediction method, the back-propagation neural network (BPNN) prediction model and SVM prediction model are also used to predict the traffic fatalities. The results show that compared with BPNN prediction model and SVM model, the prediction model of traffic fatalities based on PSO-SVM has higher prediction precision and smaller errors. The model can be more effective to forecast the traffic fatalities. And the method using particle swarm optimization algorithm for parameter optimization of SVM is feasible and effective. In addition, this method avoids overcomes the problem of “over learning” in neural network training progress.
Źródło:
Archives of Transport; 2016, 39, 3; 21-30
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tracking and disturbance rejection in a nonlinear control system with time delay
Autorzy:
Chien, T.-L.
Chen, C.-C.
Wu, C.-J.
Huang, Y.-C.
Chen, C.-Y.
Powiązania:
https://bibliotekanauki.pl/articles/969741.pdf
Data publikacji:
2007
Wydawca:
Polska Akademia Nauk. Instytut Badań Systemowych PAN
Tematy:
disturbance rejection
automobile idle-speed control system
differential geometry approach
composite Lyapunov approach
Opis:
We consider the problem of designing a feedback control law in order to reject the unknown bounded disturbance and achieve tracking of reference inputs in control systems described by a class of nonlinear time-delay differential-algebraic equations. Based on the input-output feedback linearization technique and Lya-pimov method for nonlinear state feedback synthesis, a robust globally asymptotical output tracking controller design methodology for nonlinear time-delay control systems with delays on the states and the input is developed. The underlying theoretical approaches are the differential geometry approach and the composite Lyapunov approach. For the view of practical application, the proposed control methodology has been successfully applied to the famous nonlinear automobile idle-speed control system problem.
Źródło:
Control and Cybernetics; 2007, 36, 1; 59-74
0324-8569
Pojawia się w:
Control and Cybernetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Toluene Mono-nitration in a Semi-batch Reactor
Autorzy:
Chen, L. P.
Chen, W. P.
Liu, Y.
Peng, J. H.
Liu, R. H.
Powiązania:
https://bibliotekanauki.pl/articles/358853.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
toluene mono-nitration
apparent activation energy
semi-batch reaction
thermal hazard
Opis:
Toluene mono-nitration in a semi-batch reactor was investigated with reaction calorimeter (RC1). The mixed acid HNO3/H2SO4/H2O (wt%) was used in proportion 13/66/21, which is similar to industrial parameters. The exothermic rates at different reaction temperatures were compared, and then the curves of heat generation rate after dosing were analyzed. The Maximal Temperature attainable by runaway of the desired Synthetic Reaction (MTSR) under different conditions were calculated for the course hazard evaluation. The results showed that the average reaction heat of mono-nitration was between 169.07~177.11 kJ mol-1, and the special heat of reactant was about 2 kJ kg-1 K-1. Average Ea of second order kinetic was about 30 kJ mol-1, and reaction rate was 10-4 mol s-1 l-1 order of magnitude when the strength of sulphuric acid was about 73.5%. It was also found that when temperature or stirring speed increases, the potential heat accumulation decreases.
Źródło:
Central European Journal of Energetic Materials; 2008, 5, 2; 37-47
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thidiazuron enhanced somatic embryogenes is fromcallus lines of Arabica Coffee and subsequent plant regeneration
Autorzy:
Wang, Y.-C.
Lin, M.-Z.
Huang, B.
Chung, H.-H.
Chen, J.-T.
Powiązania:
https://bibliotekanauki.pl/articles/19649.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Źródło:
Acta Biologica Cracoviensia. Series Botanica; 2018, 60, 2
0001-5296
Pojawia się w:
Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermodynamic and Electronic Properties of $OsB_2$ from First-Principles Calculations
Autorzy:
Cheng, Y.
Yang, J.
Wang, Y.
Ji, G.
Chen, X.
Powiązania:
https://bibliotekanauki.pl/articles/1365243.pdf
Data publikacji:
2014-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
71.15.Mb
61.50.Ks
67.25.de
71.20.-b
Opis:
The pressure induced phase transitions of $OsB_2$ from the orthorhombic structure (Orth) to the hexagonal structure (Hex) is investigated by using ab initio plane-wave pseudopotential density functional theory, together with quasi-harmonic Debye model. We find that the pressure-induced phase transition occurs at 2.8 GPa and 12.5 GPa by local density approximation and general gradient approximation, respectively. It is predicted that $OsB_2$ has no phase transition temperature from the Orth structure to the Hex structure. Moreover, the dependences of the relative volume V/$V_0$ on the pressure, thermal expansion coefficient α on the pressure and temperature are also successfully obtained. The electronic properties including energy band, total and partial density of states and electron density difference for two structures are also analyzed. The Mulliken charges and Bond populations for both Orth and Hex structures are also obtained.
Źródło:
Acta Physica Polonica A; 2014, 125, 5; 1186-1190
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical Predictions of Lattice Parameters and Mechanical Properties of Pentaerythritol Tetranitrate under the Temperature and Pressure by Molecular Dynamics Simulations
Autorzy:
Tan, J.J.
Hu, C.
Li, Y.
Ge, N.
Chen, T.
Ji, G.
Powiązania:
https://bibliotekanauki.pl/articles/1033453.pdf
Data publikacji:
2017-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
molecular dynamics
lattice parameter
equation of state
elasticity
mechanical properties
Opis:
Molecular dynamics simulations with condensed-phase optimized molecular potentials for atomistic simulation studies force field are performed to investigate the structure, equation of state, and mechanical properties of high energetic material pentaerythritol tetranitrate. The equilibrium structural parameters, pressure-volume relationship and elastic constants at ambient conditions agree excellently with experiments. In addition, fitting the pressure-volume data to the Birch-Murnaghan or Murnaghan equation of state, the bulk modulus B₀ and its first pressure derivative B'₀ are obtained. Moreover, the elastic constants are calculated in the pressure range of 0-10 GPa at room temperature and in the temperature range of 200-400 K at the standard pressure, respectively. By the Voigt-Reuss-Hill approximation, the mechanical properties such as bulk modulus B, shear modulus G, and the Young modulus E are also obtained successfully. The predicted physical properties under temperature and pressure can provide powerful guidelines for the engineering application and further experimental investigations.
Źródło:
Acta Physica Polonica A; 2017, 131, 2; 318-323
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Microstructural Evolution in HMX Based Plastic-bonded Explosive During Heating and Cooling Process: an in situ Small-angle Scattering Study
Autorzy:
Yan, G.
Tian, Q.
Liu, J.
Fan, Z.
Sun, G.
Zhang, C.
Wang, Y.
Chen, B.
Gong, J.
Zhou, X.
Yang, Z.
Nie, F.
Li, J.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/358618.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
SANS
SAXS
HMX-PBX
thermal damages
phase transition
Opis:
The thermal damage in octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) based plastic-bonded explosive (PBX) was investigated using in situ small-angle neutron and X-ray scattering techniques. The microstructural evolution was quantitatively characterized by the model fitting parameters of total interfacial surface area (Sv) and void volume distribution. The Sv of HMX-PBX decreased markedly above 100 °C, indicating the movement of binder into the voids. After subsequent cooling to room temperature, the scattering intensity increased significantly with increasing storage time, and a new population of voids with average diameter of 20 nm was observed, accompanied by the gradual phase transition of HMX from δ- to β-phase. The experimental results implied that serious damage within the HMX-PBX was developed during storage after heating.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 916-926
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The implementation of the Balanced Critical Factor Index methodology in the strategy redevelopment process
Autorzy:
Rymaszewska, A.
Koskinen, J.
Takala, J.
Zhao, S.
Chen, Y.
Powiązania:
https://bibliotekanauki.pl/articles/407087.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Balanced Critical Factor Index
BCFI
decision-making
strategy
Opis:
Strategic planning and development is a critical yet often overlooked issue in company's operations. The planning of development as well as addressing the distribution of available resources should be done systematically rather than instinctively however, many companies still do not have any reliable method that would facilitate the decision making processes at their disposal. This article aims at presenting the innovative analytical method- Balanced Critical Factor Index (BCFI) for addressing the need for change in company's operational strategy according to changes in available technology and knowledge. By examining a wide array of indexes, the presented method is expected to suggest the directions of development. The presented method also addresses the challenges of the complex process of decision-making. Moreover, the empirical evidence gathered in the studied case company serves as a source of important feedback regarding the further improvement of the BCFI method.
Źródło:
Management and Production Engineering Review; 2013, 4, 1; 50-56
2080-8208
2082-1344
Pojawia się w:
Management and Production Engineering Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of temperature and nitrogen deprivation on cell morphology and physiology of Symbiodinium
Autorzy:
Pasaribu, B.
Li, Y.-S.
Kuo, P.-C.
Lin, I.-P.
Tew, K.-S.
Tzen, J.T.C.
Liao, Y.K.
Chen, C.-S.
Jiang, P.-L.
Powiązania:
https://bibliotekanauki.pl/articles/49111.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Źródło:
Oceanologia; 2016, 58, 4
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Early Cambrian origin of thylacocephalan arthropods
Autorzy:
Vannier, J
Chen, J.Y.
Huang, D.Y.
Charbonnier, S.
Wang, X.Q.
Powiązania:
https://bibliotekanauki.pl/articles/23320.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
fauna
thylacocephalan arthropod
Lagerstatte
Zhenghecaris shankouensis
China
arthropod
Arthropoda
Early Cambrian
Cambrian
paleontology
Opis:
Zhenghecaris shankouensis gen. et sp. nov. is one of the largest “bivalved” arthropods of the Lower Cambrian Maotianshan Shale fauna. Its non−mineralized carapace was dome−like, laterally compressed, armed with rostral features, and probably enclosed the entire body of the animal. Zhenghecaris was provided with elliptical stalked lateral eyes. The carapace design, external ornament and visual organs of Zhenghecaris suggest affinities with the Thylacocephala, an extinct (Lower Silurian to Upper Cretaceous) group of enigmatic arthropods whose origins remain poorly understood. The bivalved arthropodsIsoxys and Tuzoia (Lower and Middle Cambrian) are two other potential thylacocephalan candidates making this group of arthropods a possible new component of Cambrian marine communities. Zhenghecaris, Isoxys, and Tuzoia are interpreted as nektonic animals that probably inhabited the lower level of the water column in shallow shelf settings at depths of perhaps 100–150 m or less. Their feeding mode either in the water column (e.g., mesozooplankton) or on the substrate (e.g., small epibenthos, detritus) is uncertain, although some of these arthropods were possibly mid−water predators (e.g., Isoxys with raptorial appendages).
Źródło:
Acta Palaeontologica Polonica; 2006, 51, 2
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Design and the First Test Results of a Fast LTD Stage
Autorzy:
Chen, L.
Zhou, L.
Zou, W.
Ren, J.
Li, Y.
Wu, S.
Xie, W.
Feng, S.
Deng, J.
Powiązania:
https://bibliotekanauki.pl/articles/1807988.pdf
Data publikacji:
2009-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
84.70.+p
52.75.Kq
84.60.Ve
Opis:
Linear transformer driver stages are designed to be used as a primary energy storage in high power pulsed generators. In this report, the design and test results of the linear transformer driver stage prototype that delivers ≈100 kA fast pulse with 133 ns FWHM into a ≈0.87 Ω resistive load are described. This stage consists of 20 (100 kV, 20 nF) storage capacitors that are arranged in 10 identical bricks located evenly around the axis of the stage. Each brick contains two capacitors, a multi-gap switch, and the output connector that transfers the energy to the resistive load. The outer diameter of the stage is ≈1.5 m, at a length of ≈20 cm. The stage is developed to demonstrate the possibility of the fast linear transformer driver technology to create high power pulsed generators.
Źródło:
Acta Physica Polonica A; 2009, 115, 6; 1186-1188
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Bending, Impact Fracture Behavior and Characteristics of Stainless Steel Clad Plates with Different Rolling Temperature
Autorzy:
An, Q.
Fan, K. Y.
Ge, Y. F.
Liu, B. X.
He, J.
Wang, S.
Chen, C. X.
Ji, P. G.
Tolochko, O.
Powiązania:
https://bibliotekanauki.pl/articles/2049433.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stainless steel clad plate
interface characteristics
bending behavior
impact morphologies
delamination crack
Opis:
The interface characteristics, bending and impact behavior, as well as fracture characteristics of stainless steel clad plates fabricated by vacuum hot rolling at different rolling temperatures of 1100°C, 1200°C and 1300°C are investigated in detail. The interface bonding strength is gradually increased with the increasing rolling temperature due to the sufficient diffusion behavior of alloy element. The bending toughness and impact toughness are gradually decreased, while the bending strength increase with the increase of the rolling temperature, which is attributed to mechanisms of matrix softening and interface strengthening at high rolling temperature. Due to the weak interface at 1100°C, the bending and impact crack propagation path was displaced by delamination cracks, which in turn lead to reduction in stress intensity of the main crack, playing an effective role in toughening the stainless steel clad plates. Moreover, the impact fracture morphologies of clad plates show a typical ductile-brittle transition phenomenon, which is attributed to the matrix softening behavior with the increasing rolling temperature.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 1; 229-239
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on Hybrid Filtering Solution for Marine Electric Network
Autorzy:
Xu, X - Y.
Mindykowski, J.
Chen, C. L. P.
Powiązania:
https://bibliotekanauki.pl/articles/259582.pdf
Data publikacji:
2010
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
electrical engineering
marine vehicle power systems
power system harmonics
power system measurements
quality control
Opis:
This paper presents a Hybrid APF/PFC/PPF Circuit (active power filtering and power factor correction circuit aided by shunt passive filter) for harmonic suppression and power factor correction in a marine electric network. By employing the proposed hybrid circuit, marine electric power network voltage and current can be maintained as being sinusoidal, and the power factor is close to 1. The effectiveness of the proposed method that is applied to a marine electric network is demonstrated through a simulation experiment. The results show that the expected performances are achieved.
Źródło:
Polish Maritime Research; 2010, 2; 72-78
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stability analysis and H control of discrete T–S fuzzy hyperbolic systems
Autorzy:
Duan, R.
Li, J.
Zhang, Y.
Yang, Y.
Chen, G.
Powiązania:
https://bibliotekanauki.pl/articles/331173.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
discrete T–S fuzzy hyperbolic model
parallel distributed compensation
positive diagonally dominant matrices
robust stability
model Takagi-Sugeno
kompensacja rozproszona
sterowanie odporne
Opis:
This paper focuses on the problem of constraint control for a class of discrete-time nonlinear systems. Firstly, a new discrete T–S fuzzy hyperbolic model is proposed to represent a class of discrete-time nonlinear systems. By means of the parallel distributed compensation (PDC) method, a novel asymptotic stabilizing control law with the “soft” constraint property is designed. The main advantage is that the proposed control method may achieve a small control amplitude. Secondly, for an uncertain discrete T–S fuzzy hyperbolic system with external disturbances, by the proposed control method, the robust stability and H performance are developed by using a Lyapunov function, and some sufficient conditions are established through seeking feasible solutions of some linear matrix inequalities (LMIs) to obtain several positive diagonally dominant (PDD) matrices. Finally, the validity and feasibility of the proposed schemes are demonstrated by a numerical example and a Van de Vusse one, and some comparisons of the discrete T–S fuzzy hyperbolic model with the discrete T–S fuzzy linear one are also given to illustrate the advantage of our approach.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2016, 26, 1; 133-145
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spectral degrees of cross-polarization of stochastic anisotropic electromagnetic beams in modified non-Kolmogorov atmospheric turbulence
Autorzy:
Chen, F.
Chen, J.
Zhao, Q.
Chen, Y
Xin, Y.
Li, J.
Pan, H.
Powiązania:
https://bibliotekanauki.pl/articles/174614.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
quasi-homogenous source
modified non-Kolmogorov turbulence
generalized Stokes parameters
Opis:
Based on the extended Huygens–Fresnel principle, variations in generalized Stokes parameters of stochastic anisotropic electromagnetic beams propagating through modified non-Kolmogorov atmospheric turbulence have been analyzed. The changes in generalized Stokes parameters with different turbulence parameters and source parameters were analyzed first. After that, the distributions of the spectral degrees of cross-polarization (SDCP) of isotropic beams and anisotropic beams were simulated. The results show that the profiles of distribution of SDCP of these two kinds of beams are very different in the near field, and will fluctuate through the propagation in atmospheric turbulence, but at last, when the propagation distance is long enough, the difference in the source makes a slight difference in the final profiles of SDCP in the output plane. They mainly depended on the turbulence perturbation, and in the weak turbulence, the profiles of final distribution show more flatter features.
Źródło:
Optica Applicata; 2013, 43, 4; 773-783
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies