- Tytuł:
- Microstructure and Properties of Magnesium Alloy AZ61 After Extrusion with KoBo Method
- Autorzy:
- Bednarczyk, I.
- Powiązania:
- https://bibliotekanauki.pl/articles/354461.pdf
- Data publikacji:
- 2019
- Wydawca:
- Polska Akademia Nauk. Czytelnia Czasopism PAN
- Tematy:
-
AZ61 magnesium alloy
KoBo method extrusion
static tensile test
microstructure
plastic deformation - Opis:
- The article presents tests results of metalforming of magnesium alloy AZ61. Materials for tests were ingots sized ϕ 40×90 mm from magnesium alloy marked with symbol AZ61. Before the shaping process the ingots underwent heat treatment. As a result of conduction of the deformation processes there were rods achieved with diameter of 8 mm. There were axisymmetrical compression tests conducted on the samples taken from rods in temperature range from RT to 350ºC in order to determine the plasticity and formability of the alloy AZ61. Static tensile test was conducted in room temperature (RT), in 300ºC and in 350ºC. With the use of light and electron microscopy techniques the changes which occurred in the microstructure of AZ61 alloy in initial condition and after plastic deformation (classic extrusion, KoBo method extrusion) were described. The deformation of alloy AZ61 using the KoBo method contributes to an increase in strength and plastic properties. The effect of superplastic flow was found at a temperature of 350ºC, where a 300% increase in plastic properties – elongation value was obtained. The analysis of the microstructure showed a significant grain size reduction in the microstructure of alloy AZ61 after deformation by the KoBo method and after anaxisymmetric compression test, where grains of an average diameter of d = 13 μm were obtained.
- Źródło:
-
Archives of Metallurgy and Materials; 2019, 64, 3; 1125-1130
1733-3490 - Pojawia się w:
- Archives of Metallurgy and Materials
- Dostawca treści:
- Biblioteka Nauki