Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Beck, R.B." wg kryterium: Autor


Wyświetlanie 1-12 z 12
Tytuł:
Ultrathin oxynitride films for CMOS technology
Autorzy:
Beck, R.B.
Jakubowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/308025.pdf
Data publikacji:
2004
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
MOS technology
gate stack
ultrathin oxynitride layers
high temperature processing
plasma processing
Opis:
In this work, a review of possible methods of oxynitride film formation will be given. These are different combinations of methods applying high-temperature oxidation and nitridation, as well as ion implantation and deposition techniques. The layers obtained using these methods differ, among other aspects in: nitrogen content, its profile across the ultrathin layer,... etc., which have considerable impact on device properties, such as leakage current, channel mobility, device stability and its reliability. Unlike high-temperature processes, which (understood as a single process step) usually do not allow the control of the nitrogen content at the silicon-oxynitride layer interface, different types of deposition techniques allow certain freedom in this respect. However, deposition techniques have been believed for many years not to be suitable for such a responsible task as the formation of gate dielectrics in MOS devices. Nowadays, this belief seems unjustified. On the contrary, these methods often allow the formation of the layers not only with a uniquely high content of nitrogen but also a very unusual nitrogen profile, both at exceptionally low temperatures. This advantage is invaluable in the times of tight restrictions imposed on the thermal budget (especially for high performance devices). Certain specific features of these methods also allow unique solutions in certain technologies (leading to simplifications of the manufacturing process and/or higher performance and reliability), such as dual gate technology for system-on-chip (SOC) manufacturing.
Źródło:
Journal of Telecommunications and Information Technology; 2004, 1; 62-69
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oxidation kinetics of silicon strained by silicon germanium
Autorzy:
Grabowski, J.
Beck, R. B.
Powiązania:
https://bibliotekanauki.pl/articles/308659.pdf
Data publikacji:
2007
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
oxidation
kinetics
modeling
silicon
silicon-germanium
Opis:
This paper reports on the studies of oxidation kinetics of silicon strained by silicon germanium layers. Experimental results of natural, chemical and thermal oxide formation are presented. The oxidation rates of silicon strained by SiGe layers have been compared with the rates of pure Si oxidation. The oxidation kinetics was studied using the parallel model proposed by Beck and Majkusiak. This model was fitted with good result to the obtained experimental data and the parameter that is most probably responsible for the strain effect was identified, as well as its dependence on Ge content in the SiGe layer.
Źródło:
Journal of Telecommunications and Information Technology; 2007, 3; 30-32
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Novel Method of Improving Electrical Properties of Thin PECVD Oxide Films by Fluorination of Silicon Surface Region by RIE in RF CF4 Plasma
Autorzy:
Kalisz, M.
Głuszko, G.
Beck, R. B.
Powiązania:
https://bibliotekanauki.pl/articles/308057.pdf
Data publikacji:
2010
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
capacitance-voltage characteristics
current-voltage characteristics
fluorine plasma
radio frequency reactive ion etching
Opis:
This study describes a novel technique to form good quality low temperature oxide (< 350 C degree). Low temperature oxide was formed by N2O + SiH4:N2 plasma in a plasma enhanced chemical vapour deposition (PECVD) system on the silicon surface reactively etched in CF4 plasma (RIE - reactive ion etching). The fabricated oxide demonstrated excellent (for low temperature dielectric formation process) currentvoltage (I-V) characteristics, such as: low leakage current, high breakdown voltage and good reliability. Experimental results indicate that the proposed method of fluorine incorporation into the SiO2/Si inteface improves electrical parameters of MOS structures.
Źródło:
Journal of Telecommunications and Information Technology; 2010, 1; 20-24
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of High Temperature Annealing on Fluorine Distribution Profile and Electro-Physical Properties of Thin Gate Oxide Fluorinated by Silicon Dioxide RIE in CF4 Plasma
Autorzy:
Kalisz, M.
Głuszko, G.
Beck, R. B.
Powiązania:
https://bibliotekanauki.pl/articles/308059.pdf
Data publikacji:
2010
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
capacitance-voltage characteristics
current-voltage characteristics
fluorine plasma
high temperature annealing process
radio frequency reactive ion etching
Opis:
This study describes the effects of high temperature annealing performed on structures fluorinated during initial silicon dioxide reactive ion etching (RIE) process in CF4 plasma prior to the plasma enhanced chemical vapour deposition (PECVD) of the final oxide. The obtained results show that fluorine incorporated at the PECVD oxide/Si interface during RIE is very stable even at high temperatures. Application of fluorination and high temperature annealing during oxide layer fabrication significantly improved the properties of the interface (Ditmb decreased), as well as those of the bulk of the oxide layer (Qeff decreased). The integrity of the oxide (higher Vbd ) and its uniformity (Vbd distribution) are also improved.
Źródło:
Journal of Telecommunications and Information Technology; 2010, 1; 25-28
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ultra-shallow nitrogen plasma implantation for ultra-thin silicon oxynitride (SiOxNy) layer formation
Autorzy:
Bieniek, T.
Beck, R. B.
Jakubowski, A.
Kudła, A.
Powiązania:
https://bibliotekanauki.pl/articles/308830.pdf
Data publikacji:
2005
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
MOS technology
plasma processing
shallow implantation
radiation damage
Opis:
The radiation damage caused by low energy r.f. plasmas has not been, to our knowledge, studied so far in the case of symmetric planar plasma reactors that are usually used for PECVD processes. The reason is that, unlike nonsymmetrical RIE reactors, such geometry prevents, basically, high-energy ion bombardment of the substrate. In this work, we present the results of experiments in which we have studied the influence of plasma processing on the state of silicon surface. Very low temperature plasma oxidation has been used as a test of silicon surface condition. The obtained layers were then carefully measured by spectroscopic ellipsometry, allowing not only the thickness to be determined accurately, but also the layer composition to be evaluated. Different plasma types, namely N2, NH3 and Ar, were used in the first stage of the experiment, allowing oxidation behaviour caused by the exposure to those plasma types to be compared in terms of relative differences. It has been clearly proved that even though the PECVD system is believed to be relatively safe in terms of radiation damage, in the case of very thin layer processing (e.g., ultra-thin oxynitride layers) the effects of radiation damage may considerably affect the kinetics of the process and the properties of the formed layers.
Źródło:
Journal of Telecommunications and Information Technology; 2005, 1; 70-75
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The role of fluorine-containing ultra-thin layer in controlling boron thermal diffusion into silicon
Autorzy:
Kalisz, M.
Beck, R. B.
Barcz, A.
Ćwil, M.
Powiązania:
https://bibliotekanauki.pl/articles/308657.pdf
Data publikacji:
2007
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
fluorine
reactive ion etching
silicon fluoride
boron thermal diffusion
fluorocarbon plasma
Opis:
We have investigated the influence of silicon dioxide reactive ion etching (RIE) parameters on the composition of the polymer layer that is formed during this process on top of the etched layer, and finally, the role of this layer in high-temperature thermal diffusion of boron into silicon. The polymeric layer formed on the etched surface appeared to consist of fluorine and silicon fluoride (SiOF and SiF). Concentration of these components changes depending on the parameters of RIE process, i.e., rf power, gas pressure and etching time. The composition of this polymeric layer affects, in turn, boron thermal diffusion into silicon. With increasing rf power, the depth of boron junction is increased, while increasing time of etching process reduces boron diffusion into silicon.
Źródło:
Journal of Telecommunications and Information Technology; 2007, 3; 25-29
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Challenges in ultrathin oxide layers formation
Autorzy:
Beck, R.B.
Jakubowski, A.
Łukasiak, L.
Korwin-Pawłowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/307646.pdf
Data publikacji:
2001
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
silicon technology
oxidation
PECVD
RTO
gate oxide
ultrathin
layers
Opis:
In near future silicon technology cannot do without ultrathin oxides, as it becomes clear from the "Roadmap'2000". Formation, however, of such layers, creates a lot of technical and technological problems. The aim of this paper is to present the technological methods, that potentially can be used for formation of ultrathin oxide layers for next generations ICs. The methods are briefly described and their pros and cons are discussed.
Źródło:
Journal of Telecommunications and Information Technology; 2001, 1; 27-34
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Applying shallow nitrogen implantation from rf plasma for dual gate oxide technology
Autorzy:
Bieniek, T.
Beck, R. B.
Jakubowski, A.
Głuszko, G.
Konarski, P.
Ćwil, M.
Powiązania:
https://bibliotekanauki.pl/articles/308685.pdf
Data publikacji:
2007
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
CMOS
dual gate oxide
gate stack
oxynitride
plasma implantation
Opis:
The goal of this work was to study nitrogen implantation from plasma with the aim of applying it in dual gate oxide technology and to examine the influence of the rf power of plasma and that of oxidation type. The obtained structures were examined by means of ellipsometry, SIMS and electrical characterization methods.
Źródło:
Journal of Telecommunications and Information Technology; 2007, 3; 3-8
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorption properties of porous silicon
Autorzy:
Domański, K.
Grabiec, P.
Gotszalk, T.
Beck, R.B.
Dębski, T.
Rangelow, I.W.
Powiązania:
https://bibliotekanauki.pl/articles/308412.pdf
Data publikacji:
2001
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
porous silicon
cantilever beam
gas sensor
Opis:
Porous silicon shows some interesting features for micromechanical applications. Some applications make use of its high surface-to-volume ratio. A capacitive gas or humidity sensor using the adsorption of gases on the porous surface can be easily fabricated. However an opportunity for more sensitive device is given by micromechanical structure. In this paper we report on the piezoresistive cantilever beam structure with porous silicon adsorbing spot as a gas sensor.
Źródło:
Journal of Telecommunications and Information Technology; 2001, 1; 53-56
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Composition and electrical properties of ultra-thin SiOxNy layers formed by rf plasma nitrogen implantation/plasma oxidation processes
Autorzy:
Bieniek, T.
Beck, R. B.
Jakubowski, A.
Konarski, P.
Ćwil, M.
Hoffman, P.
Schmeißer, D.
Powiązania:
https://bibliotekanauki.pl/articles/308689.pdf
Data publikacji:
2007
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
CMOS
gate stack
oxynitride
plasma implantation
Opis:
Experiments presented in this work are a summary of the study that examines the possibility of fabrication of oxynitride layers for Si structures by nitrogen implantation from rf plasma only or nitrogen implantation from rf plasma followed immediately by plasma oxidation process. The obtained layers were characterized by means of: ellipsometry, XPS and ULE-SIMS. The results of electrical characterization of NMOS Al-gate test structures fabricated with the investigated layers used as gate dielectric, are also discussed.
Źródło:
Journal of Telecommunications and Information Technology; 2007, 3; 9-15
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of composition of ultra-thin silicon oxynitride layers fabricated by PECVD and ultrashallow rf plasma ion implantation
Autorzy:
Mroczyński, R.
Bieniek, T.
Beck, R. B.
Ćwil, M.
Konarski, P.
Hoffman, P.
Schmeißer, D.
Powiązania:
https://bibliotekanauki.pl/articles/308687.pdf
Data publikacji:
2007
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
ultra-thin dielectrics
oxynitride
SIMS
XPS
PECVD
Opis:
In this paper differences in chemical composition of ultra-thin silicon oxynitride layers fabricated in planar rf plasma reactor are studied. The ultra-thin dielectric layers were obtained in the same reactor by two different methods: ultrashallow nitrogen implantation followed by plasma oxidation and plasma enhanced chemical vapour deposition (PECVD). Chemical composition of silicon oxynitride layers was investigated by means of X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS). The spectroscopic ellipsometry was used to determine both the thickness and refractive index of the obtained layers. The XPS measurements show considerable differences between the composition of the fabricated layers using each of the above mentioned methods. The SIMS analysis confirms XPS results and indicates differences in nitrogen distribution.
Źródło:
Journal of Telecommunications and Information Technology; 2007, 3; 20-24
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of annealing (900?C) of ultra-thin PECVD silicon oxynitride layers
Autorzy:
Mroczyński, R.
Głuszko, G.
Beck, R. B.
Jakubowski, A.
Ćwil, M.
Konarski, P.
Hoffman, P.
Schmeißer, D.
Powiązania:
https://bibliotekanauki.pl/articles/308691.pdf
Data publikacji:
2007
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
ultra-thin dielectrics
silicon oxynitride
PECVD
CMOS
Opis:
This work reports on changes in the properties of ultra-thin PECVD silicon oxynitride layers after high- temperature treatment. Possible changes in the structure, composition and electrophysical properties were investigated by means of spectroscopic ellipsometry, XPS, SIMS and electrical characterization methods (C-V, I-V and charge- pumping). The XPS measurements show that SiOxNy is the dominant phase in the ultra-thin layer and high-temperature annealing results in further increase of the oxynitride phase up to 70% of the whole layer. Despite comparable thickness, SIMS measurement indicates a densification of the annealed layer, because sputtering time is increased. It suggests complex changes of physical and chemical properties of the investigated layers taking place during high-temperature annealing. The C-V curves of annealed layers exhibit less frequency dispersion, their leakage and charge-pumping currents are lower when compared to those of as-deposited layers, proving improvement in the gate structure trapping properties due to the annealing process.
Źródło:
Journal of Telecommunications and Information Technology; 2007, 3; 16-19
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-12 z 12

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies