Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Żak, M" wg kryterium: Autor


Tytuł:
Modal analysis of frame structures with semi-rigid joints and viscoelastic connections modeled by fractional derivatives
Autorzy:
Pawlak, Z. M.
Łasecka-Plura, M.
Zak-Sawiak, M.
Powiązania:
https://bibliotekanauki.pl/articles/38697100.pdf
Data publikacji:
2023
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
viscoelastic connection
rotational damping
rheological fractional model
dynamic characteristics of structure
modified finite element
Opis:
The paper presents two methods of solving the problem of the dynamics of a frame structure with viscoelastic bonds in nodes. In the first approach, known from the literature, two-node beam elements with three degrees of freedom in each node were used. Exact shape functions were adopted to obtain a stiffness matrix, a consistent mass matrix and a damping matrix for the beam element. These matrices were then modified by introducing rotational viscoelastic constraints at the boundary nodes. In the second approach, a new method of modelling viscoelastic bonds in frame structures was proposed. It consists in removing rigid bonds between elements along selected degrees of freedom and replacing them with a new, additional element with viscoelastic properties. This approach allows the use of any rheological model to describe viscoelastic bonds (i.e. an additional element) without the need to create a new modified finite element. In this work, an advanced rheological model, i.e. the fractional Kelvin model, was used to describe rotational viscoelastic bonds. The use of fractional derivatives to describe the damping properties reduces the number of parameters needed in the model, but leads to a non-linear eigenproblem. In order to solve the eigenvalue problem, the continuation method was used, and the dynamic characteristics of the structure were determined on the basis of the calculated eigenvalues. Selected structures with viscoelastic nodes were analyzed and the obtained results confirm the effectiveness of the proposed approach.
Źródło:
Archives of Mechanics; 2023, 75, 3; 337-363
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Microstructure, Properties and Machinability of Al-Cu-Si Alloys
Autorzy:
Kozana, J.
Piękoś, M.
Maj, M.
Garbacz-Klempka, A.
Żak, P. L.
Powiązania:
https://bibliotekanauki.pl/articles/1840820.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
casting of non-ferrous metals
aluminum alloys
ternary Al-Cu-Si alloy
mechanical properties
microstructure
thermo-calc
odlewanie metali nieżelaznych
stopy aluminium
stop trójskładnikowy Al-Cu-Si
właściwości mechaniczne
mikrostruktura
Opis:
As part of the studies conducted in the field of broadly understood casting of non-ferrous metals, selected results on the impact of variable additions of copper and silicon in aluminium were presented. A series of melts was carried out with copper content kept constant at a level of 2% (1st stage) and 4% (2nd stage) and variable contents of silicon introduced into aluminium. The crystallization characteristics of the examined alloys and the percentage of structural constituents at ambient temperature were obtained by modelling the thermodynamic parameters of individual phases with the CALPHAD method. The microstructure of the obtained alloys was examined and microhardness was measured by the Vickers-Hanemann method. The alloy properties were assessed based on the results of mechanical tests, including ultimate tensile strength (UTS), hardness (BHN) and elongation (E). The machinability of the tested alloys was analyzed in a machinability test carried out by the Keep-Bauer method, which consisted in drilling with a constant feed force. The obtained results clearly indicate changes in the images of microstructure, such as the reduction in grain size, solution hardening and precipitation hardening. The changes in the microstructure are also reflected in the results of mechanical properties testing, causing an increase in strength and hardness, and plasticity variations in the range of 4 ÷ 16%, mainly due to the introduced additions of copper and silicon. The process of alloy strengthening is also visible in the results of machinability tests. The plotted curves showing the depth of the hole as a function of time and the images of chips produced during the test indicate an improvement in the wear resistance obtained for the tested group of aluminium alloys with the additions of copper and silicon.
Źródło:
Archives of Foundry Engineering; 2020, 20, 4; 145-153
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of Ti and Fe on the Microstructure and Properties of Copper and Copper Alloys
Autorzy:
Piękoś, M.
Garbacz-Klempka, A.
Kozana, J.
Żak, P. L.
Powiązania:
https://bibliotekanauki.pl/articles/1840892.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
copper alloys
thermodynamic modelling
alloying additions
titanium
mechanical properties
microstructure
stopy miedzi
modelowanie termodynamiczne
dodatki stopowe
tytan
właściwości mechaniczne
mikrostruktura
Opis:
The paper discusses issues related to the technology of melting and processing of copper alloys. An assessment was made of the impact of titanium and iron introduced in the form of pre-alloy - Ti73Fe master alloy on the microstructure and selected properties of pure copper and copper-silicon alloy. There are known examples of the use of titanium and iron additive to the copper alloy. Titanium as an additive introduced to copper alloys to improve their properties is sometimes also applicable. In the first stage of the study, a series of experimental castings were conducted with variable content of Ti73Fe master alloy entering copper in quantities of 5 %, 15 %, 25 % in relation to the mass of the metal charge. In the second stage, a silicon additive was introduced into copper in the amount of about 4 % by weight and 0.5 % and 1 % respectively of the initial Ti73Fe alloy. Thermodynamic phase parameters were modelled using CALPHAD method and Thermo-Calc software, thus obtaining the crystallization characteristics of the test alloys and the percentage of structural components at ambient temperature. Experiments confirmed the validity of the use of Ti73Fe master alloy as an additive. The pre-alloy used showed a favourable performance, both in terms of addition solubility and in the area of improvement of strength properties. Changes were achieved in the microstructure, mainly within the grain, but also in the developed dendrites of the solid solution. Changes occur with the introduction of titanium with iron into copper as well as to two-component silicon bronze.
Źródło:
Archives of Foundry Engineering; 2020, 20, 4; 83-90
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of sand accumulation in the gastrointestinal tract and its excretion with stool in silesian foals
Autorzy:
Siwińska, N.
Łuczka, A.
Żak, A.
Słowikowska, M.
Niedźwiedź, A.
Powiązania:
https://bibliotekanauki.pl/articles/2087506.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sand content
sand accumulation
abdomen ultrasonography
sedimentation
horses
Źródło:
Polish Journal of Veterinary Sciences; 2019, 2; 337-343
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling and Simulation of the Magnesium Primary Phase Crystallization in the AZ91/SiCp Composite Dependent on Mass Fraction of SiCp
Autorzy:
Lelito, J.
Krawiec, H.
Vignal, V.
Gracz, B.
Żak, P. L.
Szucki, M.
Powiązania:
https://bibliotekanauki.pl/articles/356885.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
numerical simulation
AZ91/SiCp composite
micro-model
Opis:
The aim of this work is to develop a numerical model capable of predicting the grain density in the Mg-based matrix phase of an AZ91/SiC composite, as a function of the total mass fraction of the embedded SiC particles. Based on earlier work in a range of alloy systems, we assume an exponential relationship between the grain density and the maximum supercooling during solidification. Analysis of data from cast samples with different thicknesses, and mass fractions of added SiCp, permits conclusions to be drawn on the role of SiCp in increasing grain density. By fitting the data, an empirical nucleation law is derived that can be used in a micro model. Numerical simulation based on the model can predict the grain density of magnesium alloys containing SiC particles, using the mass fraction of the particles as inputs. These predictions are compared with measured data.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 1; 29-32
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prevalence and severity of ultrasonographic pulmonary findings in horses with asthma – a preliminary study
Autorzy:
Siwinska, N.
Zak, A.
Slowikowska, M.
Krupinska, P.
Niedzwiedz, A.
Powiązania:
https://bibliotekanauki.pl/articles/2087421.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
comet tail artefact
equine asthma syndrome
horse
lung
ultrasonography
Źródło:
Polish Journal of Veterinary Sciences; 2019, 4; 653-659
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cryogenic carbonates and cryogenic speleothem damage in the Za Hájovnou Cave (Javoříčko Karst, Czech Republic)
Autorzy:
Žak, K.
Lipták, V.
Filippi, M.
Orvošová, M.
Hercman, H.
Matouškova, Š.
Powiązania:
https://bibliotekanauki.pl/articles/2060084.pdf
Data publikacji:
2018
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
cryogenic cave carbonates
speleothem damage
Javoříčko Karst
U-series dating
Opis:
A new locality of coarse-grained cryogenic cave carbonates has been found in the Za Hájovnou Cave in Javoříčko Karst in Central Moravia, Czech Republic. Crystals and crystal aggregates, usually up to 15 mm in size, form typical loose accumulations on the surface of large fallen limestone blocks and clays covering the bottoms of several cave chambers distant from the cave entrance. The cryogenic origin of the carbonates is supported by their mode of occurrence, specific crystal and aggregate morphology, and C and O stable isotope data. U-series dating of one sample of cryogenic carbonate (age 29.5 ±0.1 ka) indicated that a period of karst water freezing occurred in marine isotope stage (MIS) 3, within the Weichselian. The cave also hosts numerous examples of speleothem damage. As shown in this paper, some of these are clearly connected with freezing conditions and cave ice action.
Źródło:
Geological Quarterly; 2018, 62, 4; 829--839
1641-7291
Pojawia się w:
Geological Quarterly
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dependence of Ultrasonic and Magnetic Hyperthermia on the Concentration of Magnetic Nanoparticles
Autorzy:
Kaczmarek, K.
Hornowski, T.
Bielas, R.
Żak, D.
Timko, M.
Józefczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/1030383.pdf
Data publikacji:
2018-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.75.-c
43.35.Cg
43.35.Wa
87.85.-d
Opis:
Hyperthermia treatment is the heating of tumor tissue up to temperatures between 41°C and 45°C, which trigger several physiological reactions in the body. Hyperthermia within tissue can be applied through various mechanisms. One of them is magnetic hyperthermia which uses superparamagnetic iron oxide nanoparticles (SPIONs) heated by an externally applied magnetic field. SPIONs can also be used as sonosensitizers in ultrasound hyperthermia increasing acoustic wave attenuation. The impact of SPION concentration on thermal effect during ultrasonic and magnetic hyperthermia was investigated in agar-gel phantom with added magnetite nanoparticles. The presence of nanoparticles in the tissue-mimicking phantom increases the thermal losses of ultrasound energy and temperature of the phantom.
Źródło:
Acta Physica Polonica A; 2018, 133, 3; 716-718
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of detergent-dispersant additives on B20 fuel oxidation stability
Wpływ dodatku detergentowo-dyspergującego na stabilność paliwa B20
Autorzy:
Żak, G.
Wojtasik, M.
Żółty, M.
Powiązania:
https://bibliotekanauki.pl/articles/1835195.pdf
Data publikacji:
2018
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
oxidation inhibitor
B20 fuel
oxidation stability
detergent-dispersant additives
inhibitor utleniania
paliwo B20
stabilność oksydacyjna
dodatek detergentowo-dyspergujący
Opis:
The impact of detergent-dispersant additives prepared by INiG – PIB and the commercial oxidation inhibitor on the oxidation stability of diesel fuel containing 20% (V/V) FAME is presented. Oxidation stability was monitored during a six-month testing at room temperature. Two method of oxidation stability were used (PN-EN 15751 and PN-EN 16091). Additionally Dynamic Light Scattering technique was used to estimate the subtle stability changes in time. Good antioxidant properties of the polyisobutylene-succinimide-amide detergent-dispersant additive in diesel fuel containing 20% (V/V) FAME have been confirmed for up to five months fuel stored at room temperature. The application of the same substances as effective detergent-dispersant and antioxidant additives in fuel results in significant cost reductions, compared to the application necessity of both detergent-dispersant additives and additionally other substances as antioxidant additives.
W artykule przedstawiono wyniki badania wpływu dodatku detergentowo-dyspergującego opracowanego w INiG – PIB oraz handlowego inhibitora utleniania, na odporność na utlenianie oleju napędowego zawierającego 20% (V/V) FAME. Odporność na utlenianie monitorowano w trakcie sześciomiesięcznego testu przechowywania próbek w temperaturze pokojowej. Do badań wykorzystano dwie metody oznaczania stabilności oksydacyjnej (PN-EN 15751 oraz PN-EN 16091). Dodatkowo w celu oszacowania subtelnych zmian stabilności badanych próbek w czasie wykorzystano technikę dynamicznego rozpraszania laserowego. Potwierdzono dobre właściwości przeciwutleniające dodatku detergentowo-dyspergującego o strukturze poliizobutylenobursztynoimido-amidu w oleju napędowym zawierającym 20% (V/V) FAME do pięciu miesięcy przechowywania paliwa w temperaturze pokojowej. Stosowanie w paliwach tych samych substancji jako skutecznych dodatków detergentowo-dyspergujących oraz przeciwutleniających powoduje znaczne obniżenia kosztów w stosunku do konieczności stosowania zarówno dodatków detergentowo-dyspergujących, jak również dodatkowo innych substancji jako dodatków przeciwutleniających.
Źródło:
Nafta-Gaz; 2018, 74, 3; 237-241
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Komplikacje po iniekcjach domięśniowych u koni
Complications following intramuscular injections in horses
Autorzy:
Zak, A.
Siwinska, N.
Slowikowska, M.
Niedzwiedz, A.
Powiązania:
https://bibliotekanauki.pl/articles/862167.pdf
Data publikacji:
2018
Wydawca:
Krajowa Izba Lekarsko-Weterynaryjna
Tematy:
konie
zastrzyki
podawanie domiesniowe
powiklania
leki
dzialania niepozadane
reakcja ogolna
drzenie miesni
pocenie sie
chwiejnosc
bezdech
ekscytacja
zapasc
reakcje swoiste
ropien poiniekcyjny
martwica miesni
Źródło:
Życie Weterynaryjne; 2018, 93, 01
0137-6810
Pojawia się w:
Życie Weterynaryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Morphology and elemental analysis of free range and stabled Polish Konik horses hair using Energy-dispersive X-ray spectroscopy (EDS)
Autorzy:
Kubiak, K.
Niedźwiedź, A.
Siwińska, N.
Jaworski, Z.
Żak, A.
Słowikowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/2087781.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
diet
elemental composition
hair
horses
Polish Konik
shortages
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 1; 65-72
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Protection against high-frequency radiation of aviation electronic support systems used in air transport
Autorzy:
Dzunda, M.
Cekanova, D.
Cobirka, L.
Zak, P.
Dzurovcin, P.
Powiązania:
https://bibliotekanauki.pl/articles/116582.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
air transport
aviation electronic support systems
high-frequency radiation
radiation
electromagnetic radiation
arport radars
air electronic safety technology
radar electric field
Opis:
The aim of the article is to analyze the impact of electromagnetic radiation of aviation electronic support systems on environmental segments and a human organism. We were looking for effects of electromagnetic radiation on inhabitants and environment in the vicinity of airport radars. We accomplished measuring and found out the level of radiation harmfulness of electromagnetic radiation sources. In the conclusion we suggest to eliminate the negative impact of electromagnetic radiation on the human organism. At the same time we present the ways how workers, performing their jobs in the vicinity of strong electromagnetic radiation source, can protect themselves in compliance with legislative of the Slovak Republic. We have proposed some possibilities of protection for workers who work close to a strong source of electromagnetic radiation.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2018, 12, 1; 183-186
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected aspects of the maintenance system optimisation of the Polish Armed Forces helicopters
Autorzy:
Kowalski, M.
Waślicki, P.
Żak, J.
Powiązania:
https://bibliotekanauki.pl/articles/241597.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
helicopters
maintenance system
optimization of system
Opis:
The maintenance of helicopters at the airports of the Polish Armed Forces in the state of technical efficiency determines the possession – by the entity securing their maintenance, repair – of appropriate resources and the maintenance system. The article presents the current state of the operation processes of helicopters in the Polish Army. The characteristics of the helicopter maintenance system model and the basic assumptions were described, and the mathematical records of input data to the system were identified and presented. The selected elements of the optimisation task, its decision variables, and constraints were formulated. The initial assessment of the quality of the proposed solution of the helicopter maintenance system model. The essence of the system optimisation problem, which relates to minimising the cost function and maximising the system’s readiness function, was emphasised. In addition, an example of appropriateness of applying such an approach is presented on the basis of the School Aviation Base. The article was concluded with a short summary, which stressed the importance of this type of the optimisation system.
Źródło:
Journal of KONES; 2018, 25, 3; 289-297
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The recycling-oriented material characterization of hard disk drives with special emphasis on NdFeB magnets
Autorzy:
Dańczak, A.
Chojnacka, I.
Matuska, S.
Marcola, K.
Leśniewicz, A.
Wełna, M.
Żak, A.
Adamski, Z.
Rycerz, L.
Powiązania:
https://bibliotekanauki.pl/articles/109315.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
hard disk drives
rare earth elements
permanent magnets
recycling
Opis:
Hard disk drives (HDDs) consist of many components made from various materials: e.g. aluminum, steel, copper and rare earth elements (REEs). Recycling and reuse of these materials is desirable for economic and environmental reasons. Developing of potential HDDs recycling methods requires knowledge about HDDs material characteristic. The study aims to explore knowledge about structure and chemical composition of HDDs main components with special emphasis on NdFeB magnets. HDDs collected for the experiments came from Desktop PCs and Notebooks. The dependence between the average mass of HDDs components and such parameters as producer, year and country of production and disk capacity was analyzed. Chemical composition of NdFeB magnets and the heaviest components (i.e. top cover, mounting chassis, platters and metallic plates from magnet assembly of actuator) was analyzed by various analytical methods. The heaviest HDDs main components: top cover and mounting chassis, with the highest recycling potential, are made of aluminum and steel respectively. The majority of HDDs components showed also the existence of different alloy additions: C, Mg, Si, P, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Sn and Pb. NdFeB magnets constitute 2.2 ± 1.1% of the average HDD from Desktop PC (517.3 ± 64.2 g) and 3.2 ± 1.2% from Notebook (108.2 ± 24.3 g). The chemical composition of NdFeB magnets from collected HDDs changes in the wide range: Fe (53–62%), Nd (25–29%), Pr (2–13%), Dy (0.1– 1.4%), Ni (2–6%), Co (0.5–3.6%), B (0.8–1.0%). Recycling of permanent magnets based on NdFeB alloys is potential remedy to fill the gap in the supply of rare earth elements on the global REEs market.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 363-376
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza i ocena wielokryterialna wybranych, innowacyjnych rozwiązań transportowych wobec potrzeb osób z niepełnosprawnością i starszych
Analysis and multiple-criteria evaluation of selected, innovative transportation solutions in view of the needs of disabled and elderly people
Autorzy:
Kruszyński, M.
Żak, J.
Powiązania:
https://bibliotekanauki.pl/articles/202582.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
ograniczona mobilność
innowacyjne rozwiązania transportowe
analiza wielokryterialna
reduced mobility
innovative transportation solutions
multiple-criteria analysis
Opis:
W niniejszym artykule autorzy zaprezentowali wybrane, innowacyjne rozwiązania transportowe dla systemu transportu miejskiego i dokonali ich wielokryterialnej oceny z uwzględnieniem analizy potrzeb osób z niepełnosprawnością i starszych (w zaawansowanym wieku). Przedstawili takie nowoczesne rozwiązania transportowe jak: system personal rapid transit (PRT), system bus rapid transit (BRT), czy zintegrowany węzeł przesiadkowy. Wymienione rozwiązania zastosowali do zaprojektowania różnych wariantów systemu transportu miejskiego i poddali je ocenie wielokryterialnej z uwzględnieniem interesów (preferencji i oczekiwań) osób o ograniczonej mobilności. W artykule zaprezentowano wyniki komputerowych eksperymentów obliczeniowych z wykorzystaniem metody AHP. Na podstawie uzyskanego rankingu końcowego przeprowadzono odpowiednie wnioskowanie.
In this paper the authors have presented selected, innovative transportation solutions for the urban transportation system and have conducted a multiple-criteria evaluation of them, taking into consideration the analysis of the needs of disabled and elderly (in advanced age) people. They have presented modern transportation solutions, such as: Personal Rapid Transit (PRT) system, Bus Rapid Transit (BRT) system and integrated transfer nodes. They have used the above mentioned solutions to design different variants of an urban transportation system and have carried out their multiple-criteria evaluation taking into consideration the interests (preferences and expectations) of people with reduced mobility. In this paper the results of the computer based computational experiments, carried out using the AHP method have been presented. On the basis of the final ranking of considered variants, the appropriate reasoning has been conducted.
Źródło:
Zeszyty Naukowe Politechniki Poznańskiej. Organizacja i Zarządzanie; 2017, 75; 141-162
0239-9415
Pojawia się w:
Zeszyty Naukowe Politechniki Poznańskiej. Organizacja i Zarządzanie
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies