Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Španková, M." wg kryterium: Autor


Wyświetlanie 1-6 z 6
Tytuł:
DC nanoSQUID from Nb thin films
Autorzy:
Štrbík, V.
Pisarčík, M.
Gaži, Š.
Španková, M.
Powiązania:
https://bibliotekanauki.pl/articles/1054826.pdf
Data publikacji:
2017-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.78.-w
74.70.Ad
85.25.Dq
Opis:
We have prepared Nb thin film (thickness 80-100 nm) nanoSQUID with two symmetrically placed nanosized constrictions in superconducting loop. The nanoSQUID was prepared in two steps: at first a microsized SQUID was prepared and in the second step nanosized constrictions of the width of 120 nm in the SQUID loop were created by a focused ion beam technique. We studied the electrical and magnetic properties. From the obtained results, SQUID and constriction dimensions, the spin sensitivity was estimated to be about 50 μ_{B} Hz^{-1/2}. Further improvement of spin sensitivity is possible by lowering the SQUID and constriction dimensions.
Źródło:
Acta Physica Polonica A; 2017, 131, 4; 1054-1056
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Approximation of Electrical and Magneto Transport Properties of LSMO Thin Films
Autorzy:
Štrbík, V.
Reiffers, M.
Chromik, Š.
Španková, M.
Powiązania:
https://bibliotekanauki.pl/articles/1368199.pdf
Data publikacji:
2014-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.43.Qt
75.47.-m
75.70.-i
Opis:
We have used a three term polynomial expression to approximate electrical and magneto transport properties of epitaxial $La_{0.67}Sr_{0.33}MnO_{3}$ (LSMO) thin films in wide temperature range (2-350 K) and in magnetic field up to 9 T. The first term is determined by a low temperature (T<20 K) residual resistivity $ρ_{0}$ and this term is magnetic field independent. The second term describes the electron-electron scattering in LSMO, it shows ~ $T^{2}$ dependence of resistivity up to temperature about 160 K and depends only weakly on magnetic field. The third term, proportional to ~ $T^{4.5}$ dependence, describes a significant increase of resistivity in temperature range 160-350 K and due to its sensitivity to applied magnetic field it is possible to approximate temperature dependence of magnetorestivity below 350 K.
Źródło:
Acta Physica Polonica A; 2014, 126, 1; 210-211
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
LSMO Films with Increased Temperature of MI Transition
Autorzy:
Španková, M.
Chromik, Š.
Dobročka, E.
Štrbík, V.
Sojková, M.
Powiązania:
https://bibliotekanauki.pl/articles/1368201.pdf
Data publikacji:
2014-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.05.cp
75.47.Lx
81.15.Cd
81.15.Fg
Opis:
Epitaxial $La_{0.67}Sr_{0.33}MnO_{3}$ thin films with a significant increased temperature of metal-insulator transition (~450 K) are prepared on single crystal MgO (001) substrates using different deposition techniques - a dc magnetron sputtering or a pulsed laser deposition. The crystalline perfection of the films is characterized by X-ray diffraction technique (rocking curve measurements and reciprocal space maps). As a consequence of different methods of the film preparation we show various types of the LSMO crystal structure. Our results indicate that all the LSMO layers grown on the MgO substrate with a lattice misfit of about 8% are relaxed.
Źródło:
Acta Physica Polonica A; 2014, 126, 1; 212-213
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
LSMO/YBCO heterostructures and investigation of "negative" resistance effect in the interface
Autorzy:
Sojková, M.
Nurgaliev, T.
Štrbík, V.
Chromik, Š.
Blagoev, B.
Španková, M.
Powiązania:
https://bibliotekanauki.pl/articles/1053094.pdf
Data publikacji:
2017-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.40.-c
73.40.Cg
74.78.Fk
74.72.-h
75.50.Cc
Opis:
Samples containing the ferromagnetic manganite La_{0.67}Sr_{0.33}MnO₃ (LSMO) and high temperature superconducting YBa₂Cu₃O₇ (YBCO) single thin film areas and YBCO/LSMO bilayer area were prepared on LaAlO₃ (LAO) substrates and were used for investigation of the electrical properties of the interface. The measurements in the YBCO/LSMO interface demonstrated "negative" values of the resistance. A good interpretation of the obtained results was performed in the framework of a 1D model, which took into account the resistance of the interface R_{if} and the temperature dependence of the resistance of YBCO and LSMO films. It was shown that the effect of "negative" resistance arises because of the redistribution of the measuring electrical current in the interphase area if the resistance of the interface R_{if} is small in comparison with the resistances of the neighboring electrodes.
Źródło:
Acta Physica Polonica A; 2017, 131, 4; 842-844
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of epitaxial LSMO films grown on STO substrates
Autorzy:
Španková, M.
Štrbík, V.
Chromik, Š.
Zheng, D.
Li, J.
Machajdík, D.
Kobzev, A.
Plecenik, T.
Sojková, M.
Powiązania:
https://bibliotekanauki.pl/articles/1054697.pdf
Data publikacji:
2017-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.37.Ps
75.47.Lx
75.70.Ak
81.15.Fg
Opis:
Epitaxial manganite La_{0.67}Sr_{0.33}MnO₃ (LSMO) layers, with a thickness of 20-50 nm, are prepared on single crystal (001) SrTiO₃ (STO) substrates by pulsed laser deposition technique. Structural characterization (composition analysis, surface morphology), investigated by the Rutherford backscattering spectroscopy and atomic force microscopy, reveals the growth of stoichiometric LSMO films with a smooth surface (root-mean-square value of 0.21-1.6 nm). The prepared LSMO films possess high Curie temperature ( ≈ 412 K), low room temperature resistivity (1-2 mΩ cm) and maximum of temperature coefficient of resistivity TCR = 2.7% K¯¹ at 321 K.
Źródło:
Acta Physica Polonica A; 2017, 131, 4; 848-850
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Porosity of Knitted Fabrics in the Aspect of Air Permeability - Discussion of Selected Assumptions
Porowatość dzianin w aspekcie przepuszczalności powietrza – omówienie wybranych założeń
Autorzy:
Havlová, M.
Špánková, J.
Powiązania:
https://bibliotekanauki.pl/articles/233869.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
knitted fabric
yarn
porosity
air permeability
image analysis
trykot
przędza
porowatość
przepuszczalność powietrza
analiza obrazu
Opis:
The main focus of this paper is to look into the relationship between the structure and air permeability of single jersey knitted fabric – especially verifying some basic assumptions. First, if it is possible to neglect the permeability of yarns themselves when we evaluate that of knits, and second, if yarn hairiness plays a significant role when we evaluate the relationship between air permeability and the porosity of knits. Theoretical calculations and experiments which were performed using an analysis of microscopic images of the structure of textile materials are used for the determination of inter-yarn and intra-yarn porosity. The paper aims to show that the characteristic dimension of inter-yarn pores is significantly higher than that of intra-yarn pores, and also that the values of inter-yarn porosity measured using image analysis methods with hairiness and after the removal of hairiness are statistically significantly different. The correlation coefficients for the porosity values measured and calculated are very high.
Głównym celem opracowania było spojrzenie na zależność pomiędzy strukturą a przepuszczalnością powietrza dzianin, w szczególności zweryfikowanie niektórych podstawowych założeń. Po pierwsze, czy podczas oceny przepuszczalności powietrza dzianiny możliwe jest pominięcie przepuszczalności powietrza przędzy, z której została ona wykonana? Po drugie, czy włochatość przędzy odgrywa istotną rolę w ocenie zależności pomiędzy przepuszczalnością powietrza a porowatością dzianin? Obliczenia teoretyczne i wyniki badań, które zostały przeprowadzone przy użyciu analizy mikroskopowych obrazów struktury materiałów włókienniczych, wykorzystano do określania porowatości przędzy. Współczynniki korelacji dla zmierzonych i wyliczanych wartości porowatości były bardzo wysokie.
Źródło:
Fibres & Textiles in Eastern Europe; 2017, 3 (123); 86-91
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-6 z 6

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies