Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Świątnicki, W. A." wg kryterium: Autor


Wyświetlanie 1-6 z 6
Tytuł:
Structural Basis of Interface Engineering
Autorzy:
Świątnicki, W. A.
Powiązania:
https://bibliotekanauki.pl/articles/1945184.pdf
Data publikacji:
1996-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.72.Mm
Opis:
The paper analyses in a systematic manner these structural factors of interfaces in relation to their properties that constitute the background of "interface engineering". It is shown that the specific properties of interfaces are related to their structure. A brief description of recent structural models of interfaces is therefore presented. A new concept of interface microstructure composed of different kinds of interfacial defects is introduced and their role in determining the interface properties is emphasised. It is shown that interfaces control the processes taking place in the material under external solicitations or during the microstructure formation, mainly through their interaction with other crystal defects. Various examples illustrating the possibility of controlling and improving the material properties by appropriate changes of interface structures are presented in the case of metals, alloys, intermetallics and ceramics.
Źródło:
Acta Physica Polonica A; 1996, 89, 2; 235-249
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Stability of Nanocrystalline Structure In X37CrMoV5-1 Steel
Stabilność cieplna struktury nanokrystalicznej w stali X37CrMoV5-1
Autorzy:
Skołek, E.
Marciniak, S.
Świątnicki, W. A.
Powiązania:
https://bibliotekanauki.pl/articles/354372.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanocrystalline structure
carbide-free bainite
tool steel
thermal stability
TEM
struktura nanokrystaliczna
bainit bezwęglikowy
stal narzędziowa
stabilność cieplna
Opis:
The aim of the study was to investigate the thermal stability of the nanostructure produced in X37CrMoV5-1 tool steel by austempering heat treatment consisted of austenitization and isothermal quenching at the range of the bainitic transformation. The nanostructure was composed of bainitic ferrite plates of nanometric thickness separated by thin layers of retained austenite. It was revealed, that the annealing at the temperature higher than temperature of austempering led to formation of cementite precipitations. At the initial stage of annealing cementite precipitations occurred in the interfaces between ferritic bainite and austenite. With increasing temperature of annealing, the volume fraction and size of cementite precipitations also increased. Simultaneously fine spherical Fe7C3 carbides appeared. At the highest annealing temperature the large, spherical Fe7C3 carbides as well as cementite precipitates inside the ferrite grains were observed. Moreover the volume fraction of bainitic ferrite and of freshly formed martensite increased in steel as a result of retained austenite transformation during cooling down to room temperature.
Celem pracy było zbadanie stabilności cieplnej nanostruktury wytworzonej w stali narzędziowej X37CrMoV5-1 za pomocą obróbki cieplnej polegającej na austenityzacji i hartowaniu z przystankiem izotermicznym w zakresie przemiany bainitycznej. Utworzona nanostruktura składała się z płytek ferrytu bainitycznego nanometrycznej grubości rozdzielonych cienkimi warstwami austenitu szczątkowego. Ujawniono, że wyżarzanie stali w temperaturze wyższej niż temperatura przystanku izotermicznego prowadzi do wytworzenia w nanostrukturze wydzielenia cementytu. W początkowym etapie wyżarzania wydzielenia cementytu utworzyły się na granicach ferrytu bainitycznego i austenitu. Ze wzrostem temperatury wyżarzania następował wzrost udziału objętościowego i wielkości wydzieleń cementytu. Jednocześnie pojawiły się drobne wydzielenia węglika Fe7C3. Po wyżarzaniu w jeszcze wyższych temperaturach zaobserwowano duże, kuliste wydzielenia węglika Fe7C3 oraz wydzielenia cementytu w obrębie ziaren ferrytu. udział objętościowy tej fazy w stali. Nastąpił również wzrost udziału objętościowego ferrytu bainitycznego oraz świeżo utworzonego martenzytu w blokach w wyniku przemiany austenitu szczątkowego podczas chłodzenia stali do temperatury pokojowej.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 1; 511-516
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Microstructure and Phase Composition of 35CrSiMN5-5-4 Steel After Quenching and Partitioning Heat Treatment
Autorzy:
Skołek, E.
Wasiak, K.
Świątnicki, W. A.
Powiązania:
https://bibliotekanauki.pl/articles/356870.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
quenching and partitioning treatment
astenitic-martensitic microstructure
dilatometric studies
phase composition
Opis:
The aim of the study was to characterise the microstructure of 35CrSiMn5-5-4 steel which was subjected to a new heat treatment technology of quenching and partitioning (Q&P). The parameters of the treatment were chosen on the basis of computer simulations and dilatometric studies of phase transformations occurring in steel. The transmission electron microscopy (TEM) observations of steel microstructure after the Q&P treatment revealed the presence of martensite as well as significant amount of retained austenite in form of layers between the martensite laths. The rod-like carbides in the ferritic areas were also observed, which indicates the presence of lower bainite in steel. It was found that the retained austenite content measured by means of TEM was about 28% for partitioning at 400°C and 25% for partitioning at 260°C. These results are in good agreement with the phase composition calculated theoretically as well as those determined experimentally by use of dilatometric tests.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 3; 1683-1688
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Corrosion Resistance of The Bearing Steel 67SiMnCr6-6-4 with Nanobainitic Structure
Odporność korozyjna stali łożyskowej 67SiMnCr6-6-4 o strukturze nanokrystalicznej
Autorzy:
Skołek, E.
Dudzińska, K.
Kamiński, J.
Świątnicki, W. A.
Powiązania:
https://bibliotekanauki.pl/articles/351527.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bearing steel
austempering
nanocrystalline structure
corrosion resistance
nanobainite
stal łożyskowa
hartowność
struktura nanokrystaliczna
odporność na korozję
nanobainit
Opis:
The paper describes a comparative study of the corrosion resistance of bearing steel 67SiMnCr6-6-4 after two kinds of nanostructuring treatments and two kinds of conventional quenching and tempering treatments. The nanostructuring treatment consisted of austempering with an isothermal quenching at 240°C and 300°C. The conventional heat treatment consisted on quenching and tempering at 350°C for 1 h and quenching and tempering at 550°C for 1 h. Time and temperature of tempering was chosen so that the hardness of both samples (nanostructured as well as quenched and tempered) was similar. The microstructure of steel after each heat treatment was described with the use of transmission electron microscopy (TEM). It was shown, that the austempering conducted at 240°C produced homogenous nanobainitic structure consisting of carbide-free bainite plates with nanometric thickness separated by the layers of retained austenite. The austempering at 300°C produced a sub-micrometric carbide-free bainite with retained austenite in form of layers and small blocks. The conventional heat treatments led to a tempered martensite microstructure. The corrosion resistance study was carried out in Na2SO4 acidic and neutral environment using potentiodynamic and electrochemical impedance spectroscopy (EIS) methods. The corrosion resistance of nanostructured steel samples were compared to the steel samples with tempered martensite. The obtained results indicate, that the corrosion resistance of bearing steel with nanobainitic structure is similar to steel with tempered martensite in both acidic and neutral environment. This means that the high density of intercrystalline boundaries in nanobinite does not deteriorate the corrosion properties of the bearing steel.
W pracy przedstawiono porównawcze badania odporności korozyjnej łożyskowej stali 67SiMnCr6-6-4 poddanej dwóm typom procesów nanostrukturyzacji oraz dwóm typom konwencjonalnych obróbek hartowania i odpuszczania. Obróbka na-nostrukturyzacji polegała na hartowaniu z przystankiem izotermicznym w temperaturze 240°C oraz 300°C. Konwencjonalna obróbka cieplna obejmowała hartowanie i odpuszczanie w temperaturze 350°C przez 1 h oraz hartowanie i odpuszczanie w temperaturze 550°C przez 1 h. Czas i temperatura odpuszczania dobrane były tak, aby twardość próbek (po nanostrukturyzacji oraz hartowaniu i odpuszczaniu) była zbliżona. Mikrostruktura stali po różnych obróbkach cieplnych określona była przy użyciu transmisyjnego mikroskopu elektronowego. Wykazano, że hartowanie izotermiczne w temperaturze 240°C pozwoliło na wytworzenie jednorodnej struktury nanobainitycznej, zbudowanej z płytek bezwęglikowego bainitu, porozdzielanych warstwami austenitu szczątkowego. Podczas hartowania izotermicznego w temperaturze 300°C wytworzono bainit bezwęgli-kowy o submikronowej wielkości ziaren z austenitem szczątkowym w postaci warstw oraz niewielkich bloków. W wyniku konwencjonalnych obróbek hartowania i odpuszczania wytworzono martenzyt odpuszczony. Badania odporności korozyjnej przeprowadzono metodą elektrochemicznej spektroskopii impedancyjnej (EIS) oraz metodą potencjo dynamiczną, w kwaśnym oraz obojętnym środowisku Na2SO4. Odporność korozyjną stali po obróbkach nanostrukturyzacji porównano z odpornością korozyjną stali o strukturze martenzytu odpuszczonego. Otrzymane wyniki wskazują że zarówno w środowisku kwaśnym jak i obojętnym odporność korozyjna stali łożyskowej o strukturze nanokrystalicznej jest zbliżona do odporności korozyjnej tej stali o strukturze martenzytu odpuszczonego. Oznacza to, że duża gęstość granic ziaren w strukturze nanobainitu nie pogarsza odporności korozyjnej stali łożyskowej.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 1; 503-509
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Corrosion Resistance of the Nanostructured X37CrMoV5-1 Steel
Autorzy:
Skołek, E.
Kamiński, J.
Marciniak, S.
Świątnicki, W. A.
Powiązania:
https://bibliotekanauki.pl/articles/356529.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanobainitic steel
quenched and tempered steel
TEM
EIS
polarization
corrosion
Opis:
The aim of this study is to compare the corrosion resistance of X37CrMoV5-l tool steel after nanostructurization and after a conventional heat treatment. The nanostructuring treatment consisted of austempering at 300°C, which produced a microstructure composed of nanometric carbide-free bainite separated by nanometric layers of retained austenite. The retained austenite occurred also in form of blocks which partially undergo martensitic transformation during final cooling. For comparison, a series of steel samples were subjected to a standard quenching and high tempering treatment, which produced a microstructure of tempered martensite. The obtained results showed that the corrosion resistance of steel after both variants of heat treatment is similar. The results indicate that the nanocrystalline structure with high density of intercrystalline boundaries do not deteriorate the corrosion resistance of steel, which depends to a greater extent on its phase composition.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 1; 133-140
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nanocrystalline Steels’ Resistance to Hydrogen Embrittlement
Odporność na kruchość wodorową stali nanokrystalicznych
Autorzy:
Skołek, E.
Marciniak, S.
Skoczylas, P.
Kamiński, J.
Świątnicki, W. A.
Powiązania:
https://bibliotekanauki.pl/articles/351874.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
carbide-free bainite
tool steel
austempering
hydrogen embrittlement
bainit bezwęglikowy
stal narzędziowa
hartowanie
kruchość wodorowa
Opis:
The aim of this study is to determine the susceptibility to hydrogen embrittlement in X37CrMoV5-1 steel with two different microstructures: a nanocrystalline carbide-free bainite and tempered martensite. The nanobainitic structure was obtained by austempering at the bainitic transformation zone. It was found, that after hydrogen charging, both kinds of microstructure exhibit increased yield strength and strong decrease in ductility. It has been however shown that the resistance to hydrogen embrittlement of X37CrMoV5-1 steel with nanobainitic structure is higher as compared to the tempered martensite. After hydrogen charging the ductility of austempered steel is slightly higher than in case of quenched and tempered (Q&T) steel. This effect was interpreted as a result of phase composition formed after different heat treatments.
Celem pracy było określenie wrażliwości na kruchość wodorową stali X37CrMoV5-1 o dwóch różnych mikrostrukturach: nanokrystalicznego bainitu bezwęglikowego i odpuszczonego martenzytu. Struktura nanobainityczna została otrzymana w wyniku procesu hartowania izotermicznego w zakresie przemiany bainitycznej. Zaobserwowano, że po procesie katodowego nasycania wodorem oba typy mikrostruktury wykazują zwiększenie granicy plastyczności i znaczący spadek plastyczności. Wykazano jednak, że odporność na kruchość wodorową stali X37CrMoV5- 1o strukturze nanobainitycznej jest lepsza w porównaniu do stali o strukturze martenzytu odpuszczonego. Po katodowym nasycaniu wodorem plastyczność stali hartowanej izotermicznie jest nieznacznie wyższa niż w przypadku stali hartowanej i odpuszczanej (Q&T). Zjawisko to zostało zinterpretowane jako wynik składu fazowego wytworzonego podczas różnych obróbek cieplnych.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 1; 491-496
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-6 z 6

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies