Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "voltage control" wg kryterium: Wszystkie pola


Tytuł:
Comparative Measurements on Loudspeaker Distortion: Current vs. Voltage Control
Autorzy:
Meriläinen, E.
Powiązania:
https://bibliotekanauki.pl/articles/176516.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
current driving
current control
loudspeaker distortion
current distortion
inductance non-linearity
voice coil former
Opis:
Modulation and harmonic distortion produced by ordinary moving-coil direct-radiator drive units are measured under current control and voltage control. A realistic two-tone test signal is used to investigate the detrimental effect of the voice coil electromotive forces on the voltage-to-current conversion that is critical with voltage control. Dramatic improvements in distortion performance are obtained with current control. Current nonlinearities in voltage-controlled speakers are shown to be the dominant source of modulation and odd harmonic distortions at signal frequencies above the fundamental resonance region. Currents in conductive voice coil formers also seem to be significant sources of distortion; with current control and non-conductive formers, odd harmonics and related modulation products virtually vanished in the upper midrange.
Źródło:
Archives of Acoustics; 2017, 42, 1; 71-81
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The reactive power and voltage control management strategy based on virtual reactance cloud control
Autorzy:
Zhang, Wei Min
Zhang, Yan Xia
Powiązania:
https://bibliotekanauki.pl/articles/949903.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cloud model
graph theory
virtual reactance
voltage reactive power management
Opis:
The paper aims at the higher reactive power management complexity caused by the access of distributed power, and the problem such as large data exchange capacity, low accuracy of reactive power distribution, a slow convergence rate, and so on, may appear when the controlled objects are large. This paper proposes a reactive power and voltage control management strategy based on virtual reactance cloud control. The coupling between active power and reactive power in the system is effectively eliminated through the virtual reactance. At the same time, huge amounts of data are treated to parallel processing by using the cloud computing model parallel distributed processing, realize the uncertainty transformation between qualitative concept and quantitative value. The power distribution matrix is formed according to graph theory, and the accurate allocation of reactive power is realized by applying the cloud control model. Finally, the validity and rationality of this method are verified by testing a practical node system through simulation.
Źródło:
Archives of Electrical Engineering; 2020, 69, 4; 921-936
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Distributed collaborative optimization DC voltage control strategy for VSC–MTDC system with renewable energy integration
Autorzy:
Li, Jingye
Dong, Haiyimg
Powiązania:
https://bibliotekanauki.pl/articles/2086694.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
DC voltage control
distributed model prediction
droop control
VSC–MTDC
PSCAD/EMTDC
Opis:
Aiming at the problem of DC voltage control deviation and instability caused by a large-scale renewable energy access VSC–MTDC system, this paper combines voltage margin control and droop control. A strategy for controlling collaborative optimization in a sparsely distributed communication network has been proposed. Firstly, the distributed modeling of the system is carried out by combining MAS technology with small signal modeling. Then, a distributed model predictive controller is designed for a single droop control converter station. On this basis, a distributed cooperative optimization control strategy is proposed. According to the DC voltage deviation, the system adopts different control methods to control the receiving converter station. Finally, based on PSCAD/EMTDC and MATLAB co-simulation platforms, a six-terminal flexible HVDC system is built to verify the effectiveness of the control strategy under different conditions such as input power fluctuation, any converter station out of operation and system communication failure.
Źródło:
Archives of Electrical Engineering; 2022, 71, 2; 325--342
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Generator z maszyną pierścieniową o bezpośrednim sterowaniu napięcia wyjściowego
Slip-ring induction generator with direct output voltage control
Autorzy:
Iwański, G.
Koczara, W.
Powiązania:
https://bibliotekanauki.pl/articles/1374935.pdf
Data publikacji:
2005
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
generator indukcyjny
generator pierścieniowy
maszyna pierścieniowa
regulacja napięcia
Opis:
The main advantage of the variable speed power generation systems with slip-ring induction generator related to cage or synchronous generator is low power and low costs of the power electronics. As the speed range is limited the power converter can be designed on few percent of the generator power, that provide lower losses and costs and higher efficiency. The Direct Voltage Control method of slip ring induction generator is presented in this paper. This method bases on stator voltage vector feedback, that permits the generator can operate as a stand-alone set e.g. in island power systems. Moreover an autonomous operation mode provide the grid connected generator is useful even after the mains outage and can supply isolated part of a grid load. The Direct Voltage Control method uses a space vector theory. A stator voltage vector represented in the reference frame rotating with synchronous speed has fixed magnitude and position when the stator voltage amplitude, frequency and phase are fixed. To obtain the fixed values of the voltage vector amplitude and position, two voltage regulators are applied. One of them based on reference and actual stator voltage amplitude is responsible for rotor current amplitude. The second regulator based on reference and actual stator voltage angle referred to synchronous frame is responsible for rotor current frequency. Applied stator voltage control method do not use any information about the rotor speed or position, therefore it can be called sensorless. Moreover an instantaneous value of the generated stator voltage is controlled that provide not only fixed voltage frequency and amplitude but also controlled voltage phase. This is an important advantage in grid and generated voltage synchronization process.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2005, 72; 45-51
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Large Customer Reactive Power Control Possibilities
Wykorzystanie możliwości regulacyjnych mocy biernej wielkich odbiorców
Autorzy:
Małkowski, R.
Szczerba, Z.
Powiązania:
https://bibliotekanauki.pl/articles/397060.pdf
Data publikacji:
2014
Wydawca:
ENERGA
Tematy:
voltage control
reactive power control
large customer
Opis:
In this paper the authors wish to draw attention to the rationale for, and the possibility of, the use of local reactive power sources by the Transmission Node Master Controller (TNMC). Large Customers (LC) are one of the possible reactive power sources. The paper presents the issues related to the need for coordination between the control systems installed in the LC network, and coordination between control systems of the LC as well as master control systems in the network.
Autorzy artykułu zwracają uwagę na celowość i możliwość wykorzystania lokalnych źródeł mocy biernej przez układy regulacji grupowej węzła przesyłowego (RGWP). Jednym z takich źródeł są wielcy odbiorcy (WO). W artykule przedstawiono również zagadnienia związane z potrzebą koordynacji pomiędzy układami regulacji zainstalowanymi w sieci WO oraz koordynacji pomiędzy układami regulacji WO a układami regulacji nadrzędnej w sieci.
Źródło:
Acta Energetica; 2014, 1; 114-125
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reliable energy supply and voltage control for hybrid microgrid by PID controlled with integrating of an EV charging station
Autorzy:
Nasri, Elmehdi
Jarou, Tarik
Benchikh, Salma
El Koudia, Younes
Powiązania:
https://bibliotekanauki.pl/articles/27313830.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
PID controller
DC microgrid
energy supply reliability
renewable energy system
EV charging station
regulator PID
niezawodność systemów zasilania
energia odnawialna
stacja ładowania
Opis:
The integration of an electric vehicle (EV) charging station into the DC-microgrid requires management control of the energy supply and the voltage variation. The hybrid energy sources of the microgrid consist of battery storage, wind energy, and photovoltaic (PV) energy sources. To optimize power generation from renewable energy sources such as wind and PV, the source-side converters (SSCs) are regulated by the leading edge intelligent PID technique. This strategy enhances the quality of power delivered to the DC-microgrid. The microgrid comprises AC/DC loads, battery storage, EV charging stations, backup power from the main grid, and renewable energy supplies comprising wind and solar energy. The proposed control system relies on monitoring the state of charge of the battery and utilizing renewable energy sources to supply loads efficiently. The final results of the simulation obtained from the simulation software MATLAB and Simulink are used to validate the effectiveness of the suggested energy control technique, which performs well in terms of accurate control and maintaining a stable energy supply even under various load and weather conditions.
Źródło:
Diagnostyka; 2023, 24, 4; art. no. 2023409
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adaptacyjny algorytm regulacji transformatorów zasilających sieć rozdzielczą
Autorzy:
Małkowski, R.
Szczerba, Z.
Powiązania:
https://bibliotekanauki.pl/articles/396879.pdf
Data publikacji:
2010
Wydawca:
ENERGA
Tematy:
transformator
sieć rozdzielcza
układ regulacji
transformer
voltage control
control system
Opis:
W niniejszym artykule opisano przykład nowego inteligentnego regulatora transformatora. Układ regulacji transformatorów 110/SN, z proponowanym algorytmem działania, umożliwia automatyczne dostosowanie algorytmu działania regulatorów do aktualnych stanów systemu elektroenergetycznego (np. lawina napięcia) i w ten sposób może wpłynąć na wzrost bezpieczeństwa elektroenergetycznego.
Źródło:
Acta Energetica; 2010, 2; 27-33
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Intelligent multi-agent system for DC microgrid energy coordination control
Autorzy:
Qaderi-Baban, P.
Menhaj, M. B.
Dosaranian-Moghadam, M.
Fakharian, A.
Powiązania:
https://bibliotekanauki.pl/articles/200811.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
multi-agent system
DC microgrid
energy management
coordinated control
voltage control
Opis:
In this paper, an energy coordination control method based on intelligent multi-agent systems (MAS) is proposed for energy management and voltage control of a DC microgrid. The structure of the DC microgrid is designed to realize the mathematical modeling of photovoltaic cells, fuel cells and batteries. A two-layer intelligent MAS is designed for energy coordination control: grid-connection and islanding of a DC microgrid is combined with energy management of PV cells, fuel cells, loads and batteries. In the hidden layer and the output layer of the pro-posed neural network there are 17 and 8 neurons, respectively, and the “logsig” activation function is used for the neurons in the network. Eight kinds of feature quantities and 13 different actions are taken as the input and output parameters of the neural network from the micro-source and the load, and the as the control center agent’s decision-makers. The feasibility of the proposed intelligent multi-agent energy coordination control strategy is verified by MATLAB/Simulink simulation, and three types of examples are analyzed after increasing the load. The simulation results show that the proposed scheme exhibits better performance than the traditional approaches.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2019, 67, 4; 741-748
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Designing a PID controller to control a fuel cell voltage using the imperialist competitive algorithm
Autorzy:
Shamel, A.
Marefati, M.
Alayi, R.
Gholaminia, B.
Rohl, H.
Powiązania:
https://bibliotekanauki.pl/articles/101872.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
imperialist competitive algorithm
PEM fuel cell
optimized voltage control
PID controller
Opis:
In this article, an optimized PID controller for a fuel cell is introduced. It should be noted that we did not compute the PID controller’s coefficients based on trial-and-error method; instead, imperialist competitive algorithms have been considered. At first, the problem will be formulated as an optimization problem and solved by the mentioned algorithm, and optimized results will be obtained for PID coefficients. Then one of the important kinds of fuel cells, called proton exchange membrane fuel cell, is introduced. In order to control the voltage of this fuel cell during the changes in the charges, an optimal controller is introduced, based on the imperialist competitive algorithm. In order to apply this algorithm, the problem is written as an optimization problem which includes objectives and constraints. To achieve the most desirable controller, this algorithm is used for problem solving. Simulations confirm the better performance of proposed PID controller.
Źródło:
Advances in Science and Technology. Research Journal; 2016, 10, 30; 176-181
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An optimization model for reactive power control of super high voltage grid systems
Autorzy:
Shaban, M. A.
Powiązania:
https://bibliotekanauki.pl/articles/377699.pdf
Data publikacji:
2012
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
MVAR
super high voltage grid systems
power control
voltage control
reactive power
Opis:
This paper develops an optimization model to control the excessive (MVAR) generation by super high voltage gird systems for maintaining the nodal voltages within the required acceptable margin. The model enhances an approximate solution on the condition of balanced real power. The pseudo-inverse method of optimization is implemented as an optimal optimization is implemented as an optimal means of solving non-square systems of equations based on LaGrange's theory of optimization. It recommends the locations and ratings of the minimum required reactors from the preinstalled ones that to be in service for optimum nodal reactive power and voltage controls.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2012, 69; 89-93
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
FPGA-based control of output voltage of SRG drive system
Autorzy:
Powrózek, A.
Powiązania:
https://bibliotekanauki.pl/articles/141099.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
switched reluctance generator
single-pulse mode
output voltage control
FPGA-based control
Opis:
The paper presents an FPGA-based output voltage control system of a fourphase switched reluctance generator above base speed. The presented control strategy uses a digital PI controller to vary turn-off angle at fixed turn-on angle under single-pulse mode. Simulation tests were conducted based on the simulation model built in the Matlab/Simulink environment. The results of the simulation and laboratory tests as waveforms of voltages and currents are presented. Based on the presented control system, the dependencies of overall efficiency in the function of turn-on angle and ratio of output power to rms phase current (Pout av=Iph rms) in the function of turn-on angle were determined. They allow for the selection of a proper value of turn-on angle for the optimal performance of the generator during the output voltage control. The results obtained from laboratory and simulation tests are discussed in the conclusions.
Źródło:
Archives of Electrical Engineering; 2018, 67, 1; 95-108
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydro Power Plant in the Process of Voltage Control in the Electric Power System and the System Restoration
Elektrownia wodna w procesie regulacji napięcia w systemie elektroenergetycznym i odbudowie systemu
Autorzy:
Lubośny, Zbigniew
Łosiński, Maciej
Powiązania:
https://bibliotekanauki.pl/articles/952931.pdf
Data publikacji:
2019
Wydawca:
ENERGA
Tematy:
elektrownia wodna
stabilność napięciowa
regulacja napięcia
hydro power plant
voltage stability
voltage control
Opis:
Artykuł obejmuje wybrane zagadnienia związane z udziałem elektrowni wodnych w procesie odbudowy systemu elektroenergetycznego po blackoucie oraz regulacji napięcia w czasie trwania tego procesu. Przedstawiono wybrane wyniki pomiarów dokonanych w czasie tworzenia ciągu przesyłowego na potrzeby uruchamiania bloku elektrowni cieplnej z elektrowni wodnej.
The article covers selected issues related to the share of hydroelectric power in the process of rebuilding the power system after black-out and voltage regulation during that process. Selected results of measurements made during the creation of the transmission chain for the need to start a block of a thermal power plant from a hydroelectric power plant were presented.
Źródło:
Acta Energetica; 2019, 3; 39-43
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development and modeling of the antenna system the direction finder unmanned aerial vehicle
Opracowanie i modelowanie systemu antenowego celownika bezzałogowego statku powietrznego
Autorzy:
Boiko, Juliy
Polikarovskykh, Oleksiy
Tkachuk, Vitalii
Powiązania:
https://bibliotekanauki.pl/articles/27315356.pdf
Data publikacji:
2023
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
antennas
radiation pattern
modeling
voltage control
anteny
charakterystyka promieniowania
modelowanie
sterowanie napięciem
Opis:
The article is devoted to the design the proposed construction of the antenna system for the direction-finding complex of the unmanned aerial vehicle (UAV). The experimental part is represented by the results of mathematical modeling the behavior of the antenna in different parts the operating frequency range. The effectiveness of the adopted design solutions was evaluated in comparison with analogues of leading companies in the world. Based on the results of the research, the areas of application the antenna as part of the built-in functional mobile UAV direction finding systems were determined.
Artykuł poświęcony jest zaprojektowaniu proponowanej konstrukcji systemu antenowego dla zespołu radionawigacyjnego bezzałogowego statku powietrznego (BSP). Część eksperymentalna jest reprezentowana przez wyniki matematycznego modelowania zachowania anteny w różnych częściach zakresu częstotliwości pracy. Skuteczność przyjętych rozwiązań konstrukcyjnych została oceniona w porównaniu z odpowiednikami wiodących firm na świecie. Na podstawie wyników przeprowadzonych badań określono obszary zastosowania anteny w ramach wbudowanych funkcjonalnych mobilnych systemów radionamierzania bezzałogowych statków powietrznych.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2023, 13, 1; 26--32
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sterowanie przepływami mocy w systemie elektroenergetycznym z wykorzystaniem transformatorów z regulacją wzdłużno-poprzeczną
The control of power flows in power system using phase-angle voltage control transformers
Autorzy:
Przygrodzki, M.
Rzepka, P.
Szablicki, M.
Powiązania:
https://bibliotekanauki.pl/articles/266590.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
rozpływ mocy
zespół transformatorowy
regulacja wzdłużono-poprzeczna
power flow
transformer unit
phase-angle voltage control
Opis:
Transformatory z regulacją wzdłużno-poprzeczną pozwalają na kształtowanie zarówno poziomu, jak i kąta napięcia. Daje to możliwość regulacji parametrów stanu układu przesyłowego, a w efekcie wpływa na zmianę rozpływu mocy (w tym mocy czynnej) w sieciach elektroenergetycznych. W artykule przedstawiono ideę regulacji wzdłużno-porzecznej oraz model zespołu transformatorowego. Wykorzystując model sieciowy zespołu transformatorowego przeprowadzono analizy sieciowe skupione na ocenie możliwości sterowania rozpływem mocy. Dla wybranego zespołu transformatorowego przedstawiono wyniki wykonanych obliczeń.
The functioning of the power transmission system is the result of using, among others, devices for the transmission and transformation electricity. Proper operation and control of these devices allows to maintain the correct parameters and continuity of electricity supply to final customers. In the group of devices of electricity transformation it can be distinguished from control transformers that have the ability to shape both the magnitude and the angle of voltage. In this way, it can be adjusted state parameters of power system allow the selection of the size of active and reactive power transmission. This property lets they provide a potential opportunity to influence the power load flow (including active power) in electric power networks. The paper is presented a problem of phase-angle voltage control in power system and model of such a transformer unit. The presented transformer unit model are used for power network calculation, especially to power flows control. It was prepare some power flows cases in high voltage networks. There is presented results of power flow system study with using the voltage angle control of such transformer units.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2015, 42; 73-80
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simple three-level neutral point voltage balance control strategy based on SVPWM
Autorzy:
Bo, G.
Shanmei, Ch.
Yi, Q.
Powiązania:
https://bibliotekanauki.pl/articles/141238.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
space vector
neutral point voltage
voltage offset
PWM
Opis:
The unbalance of the neutral point voltage is an inherent problem of three-level neutral-point-clamped (NPC) inverter, the effect of neutral point voltage balancing which is caused by voltage vector is analyzed, and the relationship of the voltage offset and neutral point voltage is studied in this paper. This paper proposes a novel neutral point balance strategy for three-level NPC inverter based on space vector pulse width modulation (SVPWM). A voltage offset is added to the modulation wave, and a closed-loop neutral point voltage balance control system is designed. In the control system, the dwelling time of synthesis voltage vectors for SVPWM is varied to solve the problem of the unbalance of the neutral point voltage, the sequence of the voltage vectors maintains unchanging. Simulation and experimental results show the neutral point voltage balancing control strategy based on SVPWM is effective.
Źródło:
Archives of Electrical Engineering; 2013, 62, 1; 15-23
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies