Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "vinyl ester resin" wg kryterium: Wszystkie pola


Wyświetlanie 1-5 z 5
Tytuł:
Synthesis and Characterization of Mineral Wollastonite Particulate Filled Vinyl-Ester Resin Composites
Autorzy:
Amarababu, B.
Rangadu, V. P.
Powiązania:
https://bibliotekanauki.pl/articles/412589.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
vinylester
wollastonite
SEM
TGA
mechanical properties
Opis:
In the present research presents influence of coupling agent 1 % triethoxymethyl silane sprayed on to the wollastonite particulate powder before it dispersed into the vinylester/composites. Firstly two different composites were developed in which wollastonite is filled with vinylester resin and same wollastonite was sprayed with coupling agent 1 % triethoxymethyl silane then filled with vinylester resin. The particle functionalization with a bi-functional coupling agent 1 % triethoxymethyl silane was observed to have a significant effect on the curing process and subsequent physical properties of the composites. Wollastonite functionalization favors the composite fabrication with a lower curing temperature as compared to the as-received particle filled vinyl ester resin composites. Thermogravimetric analysis showed an increased thermo-stability in the particles functionalized filled vinyl ester resin composites as compared to the unmodified particle filled counterparts. The uniform particle dispersion and the chemical bonding between filler and vinyl ester resin matrix were found to contribute to the increased thermal stability and enhanced tensile strength and modulus.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2014, 18; 91-102
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Morphological, Mechanical and Physio-chemical Performance of ortho-Cresol Epoxy Novolac Based Vinyl Ester Resin
Autorzy:
Jaswal, S.
Gaur, B.
Powiązania:
https://bibliotekanauki.pl/articles/779370.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
thermosetting resins
crosslinking reactions
thermal behavior
mechanical properties
chemical resistance
Opis:
Vinyl ester resin (VEOCN) was prepared from o-cresol epoxy resin (EOCN) and methacrylic acid in the presence of triphenyl phosphine as catalyst and hydroquinone as inhibitor with acid value of ~ 7 mg of KOH per gram of solid. O-cresol based novolac resin (OCN), OCN based epoxy resin (EOCN) and VEOCN were characterized by Fourier transform infra red spectroscopy (FT-IR), 1H-NMR and 13C-NMR. The thermal and mechanical behavior of the samples prepared at 30°C from VEOCN using styrene and methyl-methacrylate respectively as reactive diluents, in the presence of benzoyl peroxide (2 phr) as initiator was studied using Differential Scanning Calorimetry (DSC), Thermogravimetric analysis (TGA) and Universal Testing Machine (UTM). Chemical resistance of above VER samples was also evaluated as a function of % weight loss and with the help of Scanning Electron Microscopy (SEM), upon immersing the VEOCN samples in different solutions for 90 days.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 3; 1-7
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Nanofillers on the Mechanical Properties of Vinyl Ester Resin Used as a Carbon Fiber Reinforced Polymer Matrix
Autorzy:
Kubit, Andrzej
Bucior, Magdalena
Kluz, Rafał
Ochałek, Krzysztof
Burnat, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/2201802.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
composites
nanofillers
vinyl ester resin
nano-reinforced polymers
reinforced polymer
Opis:
This article presents the results of research aimed at determining the influence of selected nanofillers of vinyl ester resin on the mechanical properties of the cured resin. The influence of the resin with nanofillers as a matrix on the properties of the unidirectional CFRP composite was also investigated. Graphite, silicon oxide and titanium dioxide nanopowders were used as resin nanofillers. Each of the fillers was considered in two different contents, i.e. 1 wt.% and 2 wt.%. The variants with such nanofillers content were compared with the unfilled reference variant. The uniaxial tensile strength tests of the resin samples were carried out, showing the possibility of increasing the strength by 19.35% for the variant 1 wt.% of silica nanopowder content. For CFRP composites, the possibility of increasing the strength in the three-point bending test by 25.57% due to the use of a matrix reinforced with graphite nanopowder with a content of 1 wt.% was demonstrated. Based on the analysis of fracture surfaces performed using SEM microscopy, it was shown that the fillers used lead to a significant improvement in the adhesion of the matrix to the composite fibers.
Źródło:
Advances in Science and Technology. Research Journal; 2022, 16, 4; 10--21
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies on Viscoelastic, Thermal and Morphological Properties of Vinyl Ester - Mixed Diluents System
Autorzy:
Ranjan, J. K.
Raghu Raja Pandiyan, K.
Goswami, S.
Powiązania:
https://bibliotekanauki.pl/articles/354420.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
vinyl ester resin
dynamic mechanical analysis
TGA
DSC
morphology
Opis:
Vinyl ester resin networks formed by using mixture of diluents were prepared. Methyl methacrylate (MMA) diluent was mixed in various proportions with vinyl ester resin which was already premixed with styrene diluent (45 wt. %). Weight ratios e.g. 80:20, 70:30 and 60:40 of VE resin: MMA diluents were studied. Viscoelastic properties of the cross-linked resin were studied by dynamic mechanical analyzer in terms of storage modulus and tanδ. Thermal analysis was performed using non-isothermal mode of Differential scanning calorimetry. The samples with mixed diluents, showed higher modulus, and glass transition temperature in comparison to that of the pure vinyl ester-styrene resin cross-linked in presence of styrene only. The difference in thermal stability between vinyl ester-styrene and vinyl ester-MMA-styrene was checked. Vinyl Ester – 20 wt. % MMA-Styrene samples have the best thermal property among all other prepared samples. Multiphase morphology was formed for the thermoset crosslinked with mixed diluents in contrast to that formed with single diluent. With increase in MMA content in the resin dispersed domain size increased.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 3; 1845-1850
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design, preparation and properties of novel flame retardant thermosetting vinyl ester copolymers based on castor oil and industrial dipentene
Autorzy:
Mao, W.
Li, S.
Li, M.
Huang, K.
Xia, J.
Powiązania:
https://bibliotekanauki.pl/articles/777956.pdf
Data publikacji:
2017
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
castor oil
vinyl ester resin
copolymers
flammability
thermal properties
Opis:
A novel bio-based flame-retardant thermosetting vinyl ester resin monomer was synthesized from castor oil. The chemical structures of the monomer was characterized by FTIR and 1H-NMR. In order to improve its rigidity and expand its application in the field of bio-based materials, it was mixed with certain proportions of another reactive bio-based VER monomer, which had rigid and strong polar groups, and then a series of copolymers were prepared with thermal curing method. Then their tensile property, hardness, morphology of fractured surface, flame retardant property, DMA and thermostability were all investigated. The results indicated that the copolymers had relatively high tensile strength of 11.2 MPa, and the limiting oxygen index is above 23% in all prepared copolymers. DMA demonstrates that the glass transition temperature of the cured resins is up to 56.1°C. Thermogravimetric analysis shows that the copolymers have excellent thermal stability.
Źródło:
Polish Journal of Chemical Technology; 2017, 19, 3; 1-8
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-5 z 5

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies