Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "thermal performance" wg kryterium: Wszystkie pola


Tytuł:
Thermal performance evaluation of an earth-to-air heat exchanger for the heating mode applications using an experimental test rig
Autorzy:
Ahmad, Saif Nawaz
Prakash, Om
Powiązania:
https://bibliotekanauki.pl/articles/2091363.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat transfer
earth-to-air heat exchanger
ground heat exchanger
geothermal energy
renewable energy
assive heating
assive cooling
effectiveness
Opis:
This paper presents the experimental investigation of an earth-to-air heat exchanger for heating purposes in the Patna region of India, using an experimental test rig. In the view of the author, real field experiments have several limitations such as lack of repeatability and uncontrolled conditions. It also takes more time for the response of parameters that depends on nature and climate. Moreover, earth-to-air heat exchangers may be expensive to fabricate and require more land area. Thus, in this work authors executed their experimental work in indoor controllable environments to investigate the thermal performance of an earth-to-air heat exchanger. The actual soil conditions were created and maintained the temperature at 26°C throughout the soil in the vicinity of pipes. Three horizontal PVC pipes of equal lengths and diameters of 0.0285 m, 0.038 m and 0.0485 m were installed in the test rig. The experiments were performed for different inlet air velocities at ambient air temperature. This study acknowledges that the maximum rise in outlet temperature occurs at a lower speed for smaller pipes. Also, the maximum effectiveness of 0.83 was observed at 2 m/s for the smallest diameter pipe.
Źródło:
Archives of Thermodynamics; 2022, 43, 1; 185--207
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal performance of novel indirect passive solar dryer
Autorzy:
Al-Jethelah, Manar
Deyab, Hussam
Yaseen, Tadahmun
Powiązania:
https://bibliotekanauki.pl/articles/35534092.pdf
Data publikacji:
2021
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
solar dryer
passive
flat collector
efficiency
Opis:
An experimental investigation was conducted to study the performance of a novel indirect type free convection solar dryer. The novel and a conventional indirect passive solar dryer were built. Solar irradiation and temperature of different locations were recorded. The air at the drying chamber entrance, lower space, and upper space temperatures besides the thermal efficiency of the novel dryer were 68, 39, 49 and 85%, respectively, higher than the conventional one.
Źródło:
Scientific Review Engineering and Environmental Sciences; 2021, 30, 2; 293-303
1732-9353
Pojawia się w:
Scientific Review Engineering and Environmental Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Phosphates and Fluorides, Included in TiO2 Nanotube Layers on the Performance of Hydrogen Peroxide Detection
Autorzy:
Arkusz, K.
Krasicka-Cydzik, E.
Powiązania:
https://bibliotekanauki.pl/articles/354114.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
titania nanotubes
thermal modification
biosensor
hydrogen peroxide
Opis:
Titania nanotube (TNT) arrays fabricated by anodizing of titanium foil in organic (ethylene glycol) and inorganic (phosphoric acid) electrolytes and thermally modified in argon revealed much improved properties to detect hydrogen peroxide. Horseradish peroxidase and acetate thionine co-absorbed by a dip coating on the TNT electrode were used to detect hydrogen peroxide in phosphate buffered saline. The morphology and electrochemical properties of TNT arrays were studied by scanning electron microscopy, electrochemical impedance spectroscopy and cyclic voltammetry. Well defined oxidation and reduction peaks for potassium ferricyanide have been observed for TNT formed in ethylene glycol and annealed in argon. TNT arrays formed in organic electrolyte and annealed in argon indicated more favorable adsorption and electrochemical properties what was confirmed by detection of hydrogen peroxide towards analyte in phosphorate buffered saline solution.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 765-772
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical modeling of hydrogen production performance in thermocatalytic reactor based on the intermetallic phase of Ni3Al
Autorzy:
Badur, Janusz
Stajnke, Michał
Ziółkowski, Paweł
Jóźwik, Paweł
Bojar, Zbigniew
Ziółkowski, Piotr Józef
Powiązania:
https://bibliotekanauki.pl/articles/240134.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermal decomposition
species transport
catalyst
CFD
rozkład termiczny
katalizator
Opis:
The main goal of the considered work is to adjust mathematical modeling for mass transfer, to specific conditions resulting from presence of chemical surface reactions in the flow of the mixture consisting of helium and methanol. The thermocatalytic devices used for decomposition of organic compounds incorporate microchannels coupled at the ends and heated to 500ºC at the walls regions. The experiment data were compared with computational fluid dynamics results to calibrate the constants of the model’s user defined functions. These extensions allow to transform the calculations mechanisms and algorithms of commercial codes adapting them for the microflows cases and increased chemical reactions rate on the interphase between fluid and solid, specific for catalytic reactions. Results obtained on the way of numerical calculations have been calibrated and compared with the experimental data to receive satisfactory compliance. The model has been verified and the performance of the thermocatalytic reactor with microchannels under hydrogen production regime has been investigated.
Źródło:
Archives of Thermodynamics; 2019, 40, 3; 3-26
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal performance of the thermal storage energy with phase change material
Autorzy:
Bałon, Paweł
Kiełbasa, Bartłomiej
Kowalski, Łukasz
Smusz, Robert
Powiązania:
https://bibliotekanauki.pl/articles/2204648.pdf
Data publikacji:
2023
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
energy storage
phase change material
PCM
heat accumulation
Opis:
Values of energy supply and demand vary within the same timeframe and are not equal. Consequently, to minimise the amount of energy wasted, there is a need to use various types of energy storing systems. Recently, one can observe a trend in which phase change materials (PCM) have gained popularity as materials that can store an excess of heat energy. In this research, the authors ana-lysed paraffin wax (cheese wax)’s capability as a PCM energy storing material for a low temperature energy-storage device. Due to the relatively low thermal conductivity of wax, the authors also analysed open-cell ceramic Al2O3/SiC composite foams’ (in which the PCM was dispersed) influence on heat exchange process. Thermal analysis on paraffin wax was performed, determining its specific heat in liquid and solid state, latent heat (LH) of melting, melting temperature and thermal conductivity. Thermal tests were also performed on thermal energy container (with built-in PCM and ceramic foams) for transient heat transfer. Heat transfer coefficient and value of accumulated energy amount were determined.
Źródło:
Acta Mechanica et Automatica; 2023, 17, 1; 76--84
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ jakości wykonania szyb zespolonych na zachowanie ich parametrów użytkowych
The impact of quality performance insulating glass units to preserve their usefull parameters
Autorzy:
Balon-Wróbel, A.
Marczewska, A.
Powiązania:
https://bibliotekanauki.pl/articles/168902.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Ceramiki i Materiałów Budowlanych
Tematy:
szyba zespolona
właściwości użytkowe
izolacyjność cieplna
izolacyjność akustyczna
insulating glass unit
utility properties
thermal insulation
acoustic insulation
Opis:
Budownictwo pasywne wymaga zastosowania energooszczędnych wyrobów budowlanych. Dążenie do osiągnięcia wysokiej izolacyjności cieplnej przegród przezroczystych w budynkach znajduje odzwierciedlenie w produkcji szyb zespolonych stosowanych w tych przegrodach. Ważne jest, aby szyby zamontowane w obiekcie (oknie) były wysokiej jakości, gdyż tylko wtedy będą mogły spełniać swoją rolę. W artykule omówiono podstawowe funkcje izolacyjnych szyb zespolonych, wymagania normatywne oraz metody ich kontroli. Przedstawiono jakość izolacyjnych szyb zespolonych oraz czynnik wpływający na uzyskanie przez te materiały najkorzystniejszych parametrów użytkowych.
Passive construction requires the use of energy-efficient building materials. Striving to achieve high thermal insulation of buildings is reflected also in the production of insulating glass units. It is important that the glass installed in the building were of high quality because only then will be able to perform its function. The article discussed the basic functions insulating glass units, normative requirements and methods of their control. Presented quality insulating glass units and a factor in obtaining these materials good performance characteristics.
Źródło:
Szkło i Ceramika; 2015, R. 66, nr 4, 4; 9-12
0039-8144
Pojawia się w:
Szkło i Ceramika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Uniwersalny system monitoringu parametrów procesów cieplnego utrwalania żywności hermetycznie zamkniętej
Universal monitoring system of performance thermal processes of hermetically sealed food heat preservation
Autorzy:
Baranowski, P. A.
Mizgalski, I.
Poliszko, S.
Szczepka, M.
Powiązania:
https://bibliotekanauki.pl/articles/271328.pdf
Data publikacji:
2013
Wydawca:
Centralny Ośrodek Badawczo-Rozwojowy Aparatury Badawczej i Dydaktycznej, COBRABiD
Tematy:
sterylizacja konserw
pasteryzacja konserw
jakość konserw
canned food sterilization
canned food pasteurization
canned food quality
Opis:
W publikacji dokonano prezentacji opracowanego w COBRABiD sp. z o.o. uniwersalnego systemu monitoringu parametrów przebiegu procesów apertyzacji żywności hermetycznie zamkniętej w oparciu o innowacyjne rozwiązania, zastosowane w wykonanym prototypie tego systemu oraz pierwsze efekty wdrożeniowe w praktyce badawczej i produkcyjnej.
The paper presents the developed by COBRABiD Ltd. universal parameter monitoring system of processes hermetically sealed food appertization. It presents innovative solutions used in the prototype of this system and the first results of implementation in practice, research and production.
Źródło:
Aparatura Badawcza i Dydaktyczna; 2013, 18, 1; 69-76
2392-1765
Pojawia się w:
Aparatura Badawcza i Dydaktyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An effect of binary fluid on the thermal performance of pulsation heat pipe
Autorzy:
Barrak, Anwar S.
Ali, Nawfal M
Ali, Hussein Hayder Mohammed
Powiązania:
https://bibliotekanauki.pl/articles/2174164.pdf
Data publikacji:
2022
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
rura cieplna
przepływ dwufazowy
przepływ ciepła
binary fluid
oscillation heat pipe
two phase flow
thermal resistance
heat transfer
Opis:
A pulsation heat pipe is an efficient heat pipe used in many engineering applications. This study aims to test the effect of working fluids on the thermal performance of pulsation heat pipe. Seven turned pulsation heat pipes were designed and manufactured from a copper pipe with a 3.5 mm inner diameter. The lengths of an evaporation part, an adiabatic passage, and a condenser part were 300 mm, 210 mm, and 300 mm, respectively. In this study, three different fluids were used as the working fluid: distilled water, methanol, and binary fluid (a mixture of water and methanol) with a 50% filling ratio. Compared to water, the experimental results suggested that methanol had a better thermal performance when used as a working fluid in the PHP. On the other hand, a binary fluid enhanced the lower thermal performance of water (29% reduction in the thermal resistance and a 20% increase in the effective thermal conductivity of the PHP).
Źródło:
International Journal of Applied Mechanics and Engineering; 2022, 27, 1; 21--34
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Refurbished Thermal Insulation of Exterior Partitions in a Building on the Primary Energy and the Air Pollutant Emission Factors
Autorzy:
Bogacz, P.
Zabielski, J.
Powiązania:
https://bibliotekanauki.pl/articles/298093.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
izolacja termiczna
renowacja
świadectwo charakterystyki energetycznej
odnawialne źródła energii
thermal insulation renovation
energy performance certificate
airborne pollutant emission
renewable energy sources
Opis:
The paper contains an analysis of a multi-flat building located in Lębork. The calculations made for the existing building as required to issue an energy performance certificate demonstrated its high energy consumption. Renovation of the thermal insulation of the building was simulated, including all partitions enclosing rooms with regulated temperature, independent from the outdoor environment, and other unheated rooms. The effect of the thermal insulation renovation on the Primary Energy Factor and the Air Pollutant Emission Factor was tested. It was proven that the analyzed refurbishment of thermal insulation was insufficient to fulfill the reference value of primary non-renewable energy input, which would ensure considerable savings on costs (amounts of fuels) of heating.
Źródło:
Technical Sciences / University of Warmia and Mazury in Olsztyn; 2012, 15(2); 251-263
1505-4675
2083-4527
Pojawia się w:
Technical Sciences / University of Warmia and Mazury in Olsztyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of modified calcium carbonate on the thermal and mechanical properties of biodegradable poly(L-lactic acid)
Wpływ modyfikowanego węglanu wapnia na termiczne i mechaniczne właściwości biodegradowalnego poli(kwasu L-mlekowego)
Autorzy:
Cai, Y.-H.
Zhang, Y.-H.
Zhao, L.-S.
Powiązania:
https://bibliotekanauki.pl/articles/945831.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
poly(L-lactic acid)
calcium carbonate
thermal behavior
mechanical performance
poli(kwas L-mlekowy)
węglan wapnia
właściwości termiczne
właściwości mechaniczne
Opis:
Modified calcite CaCO3 (M-CaCO3) was synthesized from calcium nitrate, sodium carbonate, ethylene diamine tetraacetic acid and sodium dodecyl sulfate. Then, poly(L-lactic acid) (PLLA)/ M-CaCO3 composites were fabricated using melt blending and hot-press forming technologies. The effect of M-CaCO3 on the thermal and mechanical performance of PLLA was investigated. The results showed that the crystallization temperature and M-CaCO3 content significantly affected the crystallization of PLLA but the effect of M-CaCO3 on the crystallization of PLLA was very complicated. Compared to neat PLLA, 1 % M-CaCO3 decreased the t1/2 from 3999.4 s to 342.7 s at 100 °C. The melt index measurements indicated that a small amount of M-CaCO3 could block the fluidity of PLLA. However, the addition of a high content M-CaCO3 increased the fluidity of PLLA. The results of tensile strengths and elongation at break of PLLA/M-CaCO3 composites showed that both M-CaCO3 content and defective modification CaCO3 affected the mechanical performance of the PLLA/M-CaCO 3composites.
Z zastosowaniem azotanu wapnia, węglanu sodu, kwasu etylenodiaminotetraoctowego idodecylosiarczanu sodu syntezowano modyfikowany kalcyt (M-CaCO3), a następnie mieszając składniki wstanie stopionym wytwarzano kompozyty poli(kwas L-mlekowy)/M-CaCO3. Badano zależność właściwości termicznych i mechanicznych wytworzonych kompozytów (z matrycą polilaktydową) od zawartości M-CaCO3.Wykazano, że istotny wpływ na krystalizację PLLA wywiera temperatura oraz zawartość modyfikowanego kalcytu. W temperaturze 100 °C czas połowicznej krystalizacji (t1/2) kompozytu z udziałem 1 % M-CaCO3 znacznie się zmniejszył (342,7 s) w porównaniu do wartość t1/2 czystego PLLA (3999,4 s). Pomiar masowego wskaźnika szybkości płynięcia (MFR) dowodzi, że dodatek modyfikowanego kalcytu (powyżej 3 %) do matrycy polilaktydowej wpływa na zwiększenie wartości MFR. Wyniki wytrzymałości na rozciąganie i wydłużenia przy zerwaniu kompozytów PLLA/M-CaCO3 wykazały, że zarówno zawartość węglanu wapnia, jak i jego modyfikacja wpływają na wytrzymałość mechaniczną wytworzonych kompozytów PLLA/M-CaCO3.
Źródło:
Polimery; 2015, 60, 2; 95-99
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface roughness and wettability performance of thermally modified rowan wood as a fast-growing species
Autorzy:
Candan, Zeki
Görgün, Hızır Volkan
Korkut, Süleyman
Ünsal, Öner
Powiązania:
https://bibliotekanauki.pl/articles/2067429.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Drewna
Tematy:
fast-growing species
rowan wood
surface roughness
thermal modification
wettability
Opis:
This study aims to examine the effect of the thermal modification process on the surface roughness properties of the wood of rowan (Sorbus aucuparia L.) as a fast-growing species. Four thermal modification processes were applied, with temperatures of 160 and 180°C and durations of 2 and 4 hours. In total five groups were compared, including the untreated group. Arithmetical mean roughness, maximum height, ten-spot average roughness, and root-mean-square deviation were measured using a stylus-type profilometer, both parallel and perpendicular to the grain, according to the JIS B 0601 standard. Wettability was determined by measuring the contact angle of a droplet of distilled water. After dripping, the camera captured several images to measure the contact angle. The results showed that thermal modification decreases the wettability of the samples. Moreover, increments in temperature and duration may further decrease wettability. On the other hand, there are no significant differences between groups in terms of the surface roughness values, measured both parallel and perpendicular to the grain, except for two groups. It is concluded that these process conditions did not substantially change the surface roughness properties of rowan wood panels. However, the decrease in wettability may provide new possibilities for the use of less-known wood species.
Źródło:
Drewno. Prace Naukowe. Doniesienia. Komunikaty; 2021, 64, 208; 35--44
1644-3985
Pojawia się w:
Drewno. Prace Naukowe. Doniesienia. Komunikaty
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Budynki z konstrukcją przysłupową. Termomodernizacja ścian zewnętrznych i dachu
Buildings with a corner timbered-framework. Thermal performance improvement of external walls and roof
Autorzy:
Chądzyński, A.
Piróg, M.
Powiązania:
https://bibliotekanauki.pl/articles/293668.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
konstrukcja przysłupowa
termomodernizacja
corner timbered-framework construction
thermal performance improvement
Opis:
Tematem artykułu jest termomodernizacja przegród zewnętrznych (dachu i ścian) budynków drewnianych o konstrukcji przysłupowej. Zagadnienie to dotyczy obiektów liczących w większości kilkadziesiąt i więcej lat. W artykule poruszono kwestię konieczności ich remontów i dostosowania przegród do współczesnych wymagań w zakresie izolacyjności termicznej. Na podstawie analizy formy budynków drewnianych z konstrukcją przysłupową zaproponowano sposoby wykonania docieplenia zewnętrznych ścian wieńcowych, ryglowych i połaci dachu. Przedstawiono kierunek postępowania w tym procesie, biorąc szczególnie pod uwagę rodzaj materiału, jakim jest drewno, wyjątkowy charakter budynków o konstrukcji przysłupowej oraz ich znaczenie dla krajobrazu kulturowego.
The subject of the article is thermal performance improvement of external partitions (roof and walls) of wooden buildings with a corner timbered-framework structure. This problem concerns objects which are several dozen and more years old. The article discusses the need of renovation and adapting partitions to modern requirements in the field of thermal insulation. Based on the analysis of the form of wooden buildings with a timbered structure, methods of thermal insulation of external corrugated walls, timbered walls and roof slopes have been proposed. The article presents the course of action in this process, taking into account in particular the type of material which is wood, the unique character of the buildings with a corner timbered-framework structure and their meaning for the cultural landscape.
Źródło:
Architectus; 2018, 3 (55); 101-110
1429-7507
2084-5227
Pojawia się w:
Architectus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study of Computer-Based Task Performance Under Thermal Stress
Autorzy:
Chase, B.
Karwowski, W.
Benedict, M. E.
Quesada, P. M.
Irwin-Chase, H. M.
Powiązania:
https://bibliotekanauki.pl/articles/90836.pdf
Data publikacji:
2003
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
dual task
thermal environment
cognitive performance
środowisko pracy
obciążenie cieplne
aklimatyzacja w wysokiej temperaturze
mikroklimat
Opis:
A visual-visual dual computer task was designed to test the effect of the thermal environment on dual task performance. The temperatures selected for testing were 20 and 35 °C Wet Bulb Globe Temperature (WBGT). 34 volunteers were randomly assigned to 1 of the 2 temperature conditions. Individual differences in single task performance were controlled by equating the baselines of single task performance. Once individual differences in single task capacity were con-trolled, statistically significant differences in performance were demonstrated. Mean Accuracy was computed over a 1-hr testing period in each temperature condition. Participants’ mean accuracy in the 35° condition (38.18%) was substantially lower than in the 20° condition (50.88%).
Źródło:
International Journal of Occupational Safety and Ergonomics; 2003, 9, 1; 5-15
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exergetic performance analysis of solar air heater with inverted L-shape ribs as roughness element
Autorzy:
Chaudhari, Manmohan
Sharma, Sohan Lal
Debbarma, Ajoy
Powiązania:
https://bibliotekanauki.pl/articles/27312231.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
solar air heater
heat transfer
exergy loss
exergy efficiency
thermal efficiency
Opis:
Improvement in the exegetic efficiency of a solar air heater (SAH) can be done by enhancing the rate of heat transfer. In this work, the exergetic efficiency optimization of an artificially roughened solar air heater having an inverted L-shape rib has been performed. The numerical analysis of the exergetic performance of the solar air heater was carried out at a constant heat flux of 1000 W/m2 . The study was conducted to investigate the effect of different relative roughness pitch (7.14–17.86) on the exergy losses, under the Reynolds number range of 3000 to 18 000. The roughness parameter of this geometry has been optimized and found to be among functional operating parameters like average solar intensity and temperature rise across the collector. The optimized value of relative roughness pitch is 17.86 at the isolation of 1000 W/m2 , and the parameter of temperature rise ranges from 0.005 to 0.04.
Źródło:
Archives of Thermodynamics; 2023, 44, 3; 241--267
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of glassy carbon and cancellous bone admixture on performance and thermal properties of acrylic bone cements
Autorzy:
Choryłek, P.
Postawa, P.
Powiązania:
https://bibliotekanauki.pl/articles/1818510.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
bone cement
PMMA
acrylic bone cement
vertebroplasty
kyphoplasty
glassy carbon
cancellous bone
cement kostny
akrylowy cement kostny
wertebroplastyka
kyfoplastyka
węgiel szklisty
kość gąbczasta
Opis:
Purpose: of the research is to physically modify the composition of bone cements with glassy carbon and cancellous bone to improve its performance, reduce polymerization temperature and reduce the ability of cements the effect of admixture on the phenomenon of relaxation. Design/methodology/approach: SpinePlex bone cement was modified with glassy carbon powder with 20-50 pm granulation with Maxgraft®. Maxgraft cancellous bone has been ground to 20-50 pm grains. Samples of unmodified cements (reference) and modified with glassy carbon and cancellous bone were prepared for the tests. The glassy carbon powder and ground cancellous bone were premixed with the cement copolymer powder, and then the premix prepared this way was spread in a liquid monomer. To delay the polymerization process, all components were cooled before mixing to 15°C. The addition of glassy carbon was 0.4 g and the addition of cancellous bone was 0.2 g per 20 g of cement powder, i.e. about 1.96% by mass. Polymerization temperature, relaxation and differential scanning calorimetry tests were performed on the samples made. Findings: Additives used allow: to reduce the polymerization temperature, as well as rheological properties. During the studies it was found that the additive which can meet the requirements is glassy carbon in form of powder and cancellous bone. Research limitations/implications: The results presented in the publication require further advanced research, which will be the subject of further modification attempts by the research team. Practical implications: The conducted tests showed a significant effect of glassy carbon as a modifier on the mechanical properties of cement after its solidification, but also on the course of the polymerization process. Temperature registration tests during crosslinking, tests of mechanical properties (behaviour of cement samples under load) and DSC differential scanning calorimetry analysis confirmed that the addition of glassy carbon had an effect on each of these aspects. Originality/value: The original in these studies is the possibility to improve fundamental properties of the selected bone cements by using different than commonly used additives.
Źródło:
Archives of Materials Science and Engineering; 2020, 104, 1; 30--40
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies