Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "static characteristics" wg kryterium: Wszystkie pola


Tytuł:
Torque characteristics of double-stator permanent magnet synchronous machines
Autorzy:
Awah, C. C,
Okoro, O. I.
Powiązania:
https://bibliotekanauki.pl/articles/140529.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
fault-tolerance
mutual-and self-inductance
power
static torque and torque-density
Opis:
The torque profile of a double-stator permanent magnet (PM) synchronous machine of 90 mm stator diameter having different rotor pole numbers as well as dual excitation is investigated in this paper. The analysis includes a comparative study of the machine’s torque and power-speed curves, static torque and inductance characteristics, losses and unbalanced magnetic force. The most promising flux-weakening potential is revealed in 13- and 7-rotor pole machines. Moreover, the machines having different rotor/stator (Nr/Ns) pole combinations of the form Nr = Ns ± 1 have balanced and symmetric static torque waveforms variation with the rotor position in contrast to the machines having Nr = Ns ± 2. Further, the inductance results of the analyzed machines reveal that the machines with odd rotor pole numbers have better fault-tolerant capability than their even rotor pole equivalents. A prototype of the developed double-stator machine having a 13-pole rotor is manufactured and tested for verification.
Źródło:
Archives of Electrical Engineering; 2017, 66, 4; 815-828
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics of the Microstructure and Properties of Mg-Li Magnesium Alloy after Deformation by the KoBo Method
Autorzy:
Bednarczyk, Iwona
Powiązania:
https://bibliotekanauki.pl/articles/2134107.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Mg-Li alloys
metod SPD
static compression test
microstructure
Opis:
The article presents the results of tests of plastic shaping of magnesium alloy Mg-Li. Magnesium alloy for an extrusion process was obtained with the method of vacuum smelting and casting into graphite moulds. The materials for tests were slabs cast from magnesium alloys with symbols: Mg-4%Li-1%Ca (LX41). Before the process of deformation the castings were subject to homogenization. Conventional extrusion tests were conducted in a complex state of deformation (KoBo method). An assessment was performed of the influence of the deformation process parameters on the structure and properties of the tested alloy. Results of mechanical tests were presented both for static compression test in room temperature. On the basis of the achieved tests results, the susceptibility to plastic working for the Mg-4%Li-1%Ca alloy was determined. An analysis of the microstructure was conducted both in the initial condition and after plastic deformation with the use of light and scanning microscopy techniques. The applied deformation methods allowed the determination of the influence of process parameters on changes in the microstructure and properties of the Mg-4%Li-1%Ca alloy.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 3; 1179--1184
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Symulacyjne wyznaczanie charakterystyk statycznych dla typoszeregu odbojnic cylindrycznych
The Simulated Determination of Static Characteristics for Type-Series of Cylindrical Fenders
Autorzy:
Berczyński, S.
Galor, W.
Grządziel, Z.
Powiązania:
https://bibliotekanauki.pl/articles/360604.pdf
Data publikacji:
2005
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
OMiUO 2005
materiały hiperelastyczne
symulacja komputerowa
zagadnienia kontaktowe
odbojnice nabrzeżowe
hyperelastic substances
computer simulation
contact issue
cylindrical fenders
Opis:
W artykule przedstawiono wyniki badań symulacyjnych polegających na wyznaczeniu charakterystyk statycznych dla typoszeregu cylindrycznych odbojnic. Wykonano dyskretyzację elementami skończonymi modelu geometrycznego przekroju odbojnicy cylindrycznej z uwzględnieniem własności hiperelastycznych materiału i zjawisk kontaktowych. Przedstawiono deformacje oraz charakterystyki otrzymane z obliczeń numerycznych i eksperymentów.
The paper presents the results of simulation research based on static characteristics determination for the type series of cylindrical fenders. The discretization by finite elements of geometrical model of cylindrical fender plane section was performed, taking into account hyperelastic elements and contact phenomena. The deformations and curves of the characteristics achieved in numerical calculations and experimental method is presented.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2005, 5 (77); 65-72
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dobór parametrów konstrukcyjnych silnika reluktancyjnego przełączalnego oraz ich wpływ na charakterystyki statyczne momentu
Assortment of constructional parameters of Switched Reluctance Motor and their influence on static torque characteristics
Autorzy:
Bieńkowski, K.
Rogalski, A.
Flaszczyński, M.
Powiązania:
https://bibliotekanauki.pl/articles/2076297.pdf
Data publikacji:
2005
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
silnik reluktancyjny przełączalny
SRM
silniki elektryczne
charakterystyka statyczna
moment
Opis:
The influences of geometrical parameters of three phase 12/8 SRM on static torque were presented on this paper. Electromagnetic torque was obtained in result of solving FEM magnetostatic model of the motor. Assortment of internal stator diameter, breaths of the poles in dependence of external stator diameter for maximum torque was presented.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2005, 73; 107-112
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza konstrukcji trójpasmowej silnika reluktancyjnego przełączalnego 6/4 o niesymetrycznym obwodzie stojana - wyznaczanie charakterystyk statycznych
Analysis of Three-Phase Switched Reluctance Motor 6/4 with Asymmetrical Stator Circuit – Static Charakteristic Determination
Autorzy:
Bogusz, P.
Korkosz, M.
Prokop, J.
Powiązania:
https://bibliotekanauki.pl/articles/1368649.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
silnik reluktancyjny przełączalny
niesymetria stojana
charakterystyki statyczne
switched reluctance motor
asymmetrical stator
static characteristics
Opis:
Asymmetry of magnetic circuit of stator or motor leads to changes in static characteristics shape of switched reluctance motor. Analysis of influence of a stator magnetic circuit asymmetry on static characteristics of designed motor was achieved. The asymmetry of magnetic circuit was forced by overall dimensions of designed motor. Static characteristics were determined based on simulation model. Due to asymmetry of a stator magnetic circuit, characteristics were determined for two various phases of motor. Measurement verification was achieved in laboratory conditions . Conclusions concerning the influence of stator magnetic circuit on static characteristics of motor were placed.
Niesymetria obwodu magnetycznego stojana czy też wirnika prowadzi do zmiany kształtu charakterystyk statycznych silnika reluktancyjnego przełączalnego. W danym przypadku dokonano analizy wpływu niesymetrii obwodu magnetycznego stojana na charakterystyki statyczne projektowanego silnika. Niesymetria obwodu magnetycznego została wymuszona ograniczeniami gabarytowymi projektowanego napędu. Na bazie modelu symulacyjnego zostały wyznaczone charakterystyki statyczne silnika. Z uwagi na niesymetrię obwodu magnetycznego stojana wyznaczono charakterystyki dla dwóch różnych pasm silnika. W warunkach laboratoryjnych dokonano weryfikacji pomiarowej. Zamieszczono wnioski dotyczące wpływu niesymetrii obwodu magnetycznego stojana na charakterystyki statyczne silnika.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2013, 4, 100/2; 19-24
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza wpływu grubości szczeliny powietrznej na charakterystyki statyczne silnika reluktancyjnego przełączalnego
Influence of air-gap thickness on static characteristics in switched reluctance motor
Autorzy:
Bogusz, P.
Korkosz, M.
Prokop, J.
Powiązania:
https://bibliotekanauki.pl/articles/1373784.pdf
Data publikacji:
2009
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
silnik reluktancyjny przełączalny
maszyna reluktancyjna przełączalna
szczelina powietrzna
Opis:
In the article we discuss the influence of an air-gap thickness on the switched reluctance motor with 6/4 configuration static characteristics. This motor has been designed for household equipment purpose and it is characterized by non-symmetrical construction of magnetic circuit. In the work we present field computation results of motor magnetic circuit for particular changes of air-gap thickness range for two different (because of non-symmetrical construction) motor phases. There is also presented the dependence of mean value of motor torque versus current on air-gap thickness changes for two different phases. We present laboratory research results of windings self-inductances profiles estimation versus rotor angle for few cases of motor air-gap thickness.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2009, 82; 141-146
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczanie charakterystyk statycznych maszyn reluktancyjnych przełączalnych
Assign of static characteristics for switched reluctance machines
Autorzy:
Bogusz, P.
Korkosz, M.
Prokop, J.
Powiązania:
https://bibliotekanauki.pl/articles/1374923.pdf
Data publikacji:
2005
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
SRM
maszyna reluktancyjna
charakterystyka statyczna
silnik reluktancyjny przełączalny
Opis:
The issue assign of static characteristics of switched reluctance machines with using finite element method and experimental tests are described in the present work. Computation with using ANSYS software are made for four work out SRM constructions (12/8, 8/6, 6/4, and 4/2). Analysis of magnetic field for discusses SRM models are presented. Characteristics of electromagnetic torque, magnetic flux and inductance coil coefficients as a function current and rotor position angle are also shown. There are presented the results of experimental tests of described machines. Experimental tests are made on laboratory stand with card DS 1104. There are presented conclusion too.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2005, 72; 53-58
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania właściwości magnetycznych rdzeni transformatorów i dławików do przekształtników
Investigations into magnetic properties of cores of transformers and inductors for converters
Autorzy:
Buze, A.
Powiązania:
https://bibliotekanauki.pl/articles/160250.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
Tematy:
przekształtniki mocy
transformatory specjalne
dławiki indukcyjne
badania właściwości magnetycznych
power static converters
special transformers
induction reactors
magnetic characteristics test
Opis:
W Zakładzie Trakcji Elektrycznej Instytutu Elektrotechniki prowadzone są systematyczne badania stosowanych rdzeni i materiałów magnetycznych. W artykule omówiono typowe przebiegi prądów i napięć, a następnie rodzaje wykonywanych badań specjalnych w nawiązaniu do ich wykorzystania. Podano także przykładowe wyniki pomiarów wykonywanych w laboratorium Instytutu.
Systematic investigations of the cores and magnetic materials applied are conducted at the Department of Electric Traction of the Electrotechnical Institute. The paper discusses typical variations of currents and voltages and then the kinds of special investigations carried out with reference to their applications. Exemplary results of measurements performed at the laboratory of the Institute are also given.
Źródło:
Prace Instytutu Elektrotechniki; 2013, 261; 67-76
0032-6216
Pojawia się w:
Prace Instytutu Elektrotechniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stan awaryjny wiaduktu kolejowego w Bydgoszczy
State of emergency of railway viaduct in Bydgoszcz
Autorzy:
Chróścielewski, J.
Banaś, A.
Malinowski, M.
Sitarski, A.
Sochacki, J.
Powiązania:
https://bibliotekanauki.pl/articles/160952.pdf
Data publikacji:
2014
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
wiadukt kolejowy
stan awaryjny
charakterystyka techniczna
stan techniczny
analiza statyczno-wytrzymałościowa
railway viaduct
emergency state
technical characteristics
technical condition
static-strength analysis
Opis:
W artykule przedstawiono opis stanu awaryjnego wiaduktu kolejowego. Omówiono wyniki badań in situ oraz teoretycznych analiz statyczno-wytrzymałościowych ponad 100-letniego obiektu. Przedstawiono wnioski i zalecenia dotyczące doraźnego zabezpieczenia obiektu oraz warunki jego dalszej eksploatacji.
The aim of this paper is to describe the damage of railway viaduct. The results of load tests and theoretical static analysis of over 100-years old viaduct are shown. Finally temporary preservation and the perspective of future exploitation are discussed.
Źródło:
Przegląd Budowlany; 2014, R. 85, nr 2, 2; 44-50
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie statycznych i dynamicznych stanów pracy małego silnika indukcyjnego
Modelling of static and dynamic characteristics of small induction motor
Autorzy:
Dems, M.
Komęza, K.
Wiak, S.
Zadrożny, J.
Powiązania:
https://bibliotekanauki.pl/articles/159223.pdf
Data publikacji:
2003
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
Tematy:
silniki elektryczne małe
silniki indukcyjne
modelowanie
Opis:
W pracy przedstawiono wyniki modelowania obwodowego i obwodowo-polowego charakterystyk elektromagnetycznych małego (370 W) silnika indukcyjnego przy biegu jałowym i w stanie zwarcia. Pomierzone charakterystyki pozwoliły na weryfikację obliczonych parametrów schematu zastępczego silnika. Parametry te zostały wykorzystane w obliczeniach obwodowych przebiegów rozruchowych silnika zasilanego napięciem sieciowym. Porównanie wyników wskazuje na dobrą adekwatność stosowanego modelu obwodowego.
In last years the speed-control drives with inverter-fed induction motors more and more are used. In inverter-fed motors additional phenomena due to high voltage/current harmonics may occur. Thus, the necessity to modify mathematical models of induction motor's should be taken seriously into consideration to make possible electromagnetic calculations in static and dynamic states as well. In the paper are presented the results of the electromagnetic characteristics' modelling of a small induction motor (370 W) using circuit method and circuit-field one as well, in no-load and short-circuit states of the machine. The modified motor's model should take into consideration the higher motor's harmonics as well as non linear phenomena such as magnetic circuit saturation, displacement of currents in rotor bars [3] and parametric resonance [5], if any, i.e. their influence on equivalent circuit parameters of the motor. Therefore, the calculation of motor's field distribution was necessary using field and circuit calculation methods. Next, these parameters have been used in order to calculate - using the circuit method - the start characteristics of the motor when supplying with network voltage. Applying the measured motor characteristics the verification of the calculated motor's equivalent circuit parameters has been done, in no-load and short-circuit states of the motor. The calculations and measurements of currents have been done when supplying motor with network sinusoidal voltage as well as with PWM inverter. Relevant results are shown in sequence in Fig. 2 (r.m.s. currents' values) and Fig. 3 (relative differences between calculated and measured currents related to measured value when supplying with sinusoidal voltage). In Figs 10, 11, 12 the measured and calculated courses of phase currents, electromagnetic torque and speed during free acceleration of the motor are presented. The comparison of measured and calculated results proves a good adequacy of the circuit model used.
Źródło:
Prace Instytutu Elektrotechniki; 2003, 216; 103-115
0032-6216
Pojawia się w:
Prace Instytutu Elektrotechniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Static characteristics of pulsed actuator with combined plunger
Autorzy:
Doležel, I.
Pánek, D.
Ulrych, B.
Powiązania:
https://bibliotekanauki.pl/articles/97389.pdf
Data publikacji:
2012
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
electromagnetic actuator
plunger
pulsed actuator
Opis:
A novel type of pulsed electromagnetic actuator is presented and modelled. Its plunger consists of two cylindrical parts made of classical magnetic material and permanent magnet, respectively. Its motion is controlled by short current pulses of the prescribed amplitude. The paper starts with the definition of the technical problem and formulation of its mathematical model. This model is then solved numerically and the whole methodology is illustrated by a typical example, whose results are discussed.
Źródło:
Computer Applications in Electrical Engineering; 2012, 10; 127-136
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Static characteristics of pulsed actuator with plunger consisting of carbon steel and permanent magnet
Autorzy:
Doležel, I.
Pánek, D.
Ulrych, B.
Powiązania:
https://bibliotekanauki.pl/articles/376540.pdf
Data publikacji:
2012
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
pulsed actuator
electromagnetic actuator
Opis:
A novel type of pulsed electromagnetic actuator is presented and modeled. Its plunger consists of two separate (but mutually connected) cylindrical parts made of classical magnetic material and permanent magnet, respectively, and its motion is controlled by short current pulses of the defined amplitude. The paper starts with the definition of the technical problem and formulation of its mathematical model. This model is then solved numerically and the whole methodology is illustrated by a typical example. It is shown that unlike the classical devices the above actuator exhibits high holding force and low consumption of energy.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2012, 72; 65-74
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The static characteristics of a torsionally flexible metal coupling
Charakterystyki statyczne metalowego sprzęgła podatnego skrętnie
Autorzy:
Filipowicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/374553.pdf
Data publikacji:
2008
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
sprzęgło metalowe
sprzęgło podatne skrętnie
charakterystyka quasi-dynamiczna
charakterystyka statyczna
metal coupling
flexible torsional coupling
quasi-dynamic characteristic
static characteristic
Opis:
The paper presents a description of test stands and the methodology of determining the static characteristics of a metal coupling of high torsional flexibility. In addition, the paper presents preliminary tests results which enable to determine the above characteristics.
W pracy przedstawiono budowę nowego rozwiązania konstrukcyjnego metalowego sprzęgła o dużej podatności skrętnej i opis stanowisk badawczych oraz metodykę wyznaczania jego charakterystyk statycznych. Zaprezentowano także uzyskane wstępne wyniki badań, pozwalające na wyznaczenie wymienionych charakterystyk.
Źródło:
Transport Problems; 2008, 3, 1; 69-75
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Szybka korekcja statycznych charakterystyk termometrycznych termistorów
Fast static correction of thermometric NTC thermistor characteristics
Autorzy:
Gołębiowski, J.
Gozdur, R.
Majocha, A.
Powiązania:
https://bibliotekanauki.pl/articles/155917.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pomiar temperatury
termistory NTC
charakterystyki termometryczne
korekcja charakterystyk
measurement of temperature
NTC thermistors
thermometric characteristic
correction of characteristic
Opis:
W artykule przedstawiono metodę szybkiej korekcji statycznych charakterystyk termometrycznych termistorów. Zastosowano komputerowy system pomiarowy z wzorcowym czujnikiem platynowym oraz elementem wykonawczym w postaci pompy ciepła Peltiera. Zaprezentowano wyniki pomiarów. Przestawiono metodę wyznaczania zmodyfikowanych parametrów charakterystyki termometrycznej na podstawie przeprowadzonych pomiarów.
The paper presents a method for fast correction of static characteristics of NTC thermistors and a measurement-control system with dedicated software. The measurement system uses a high performance current source and ADC card with 16-bit converter and a USB interface. The control unit uses a three-stage Peltier heat pump that enables fast and simple stabilization of the temperature in the range (20 ÷ 85) °C. Using a software PID controller and a standard Pt100 temperature sensor the stability achieved was at the level of š 0.02°C over the full range. Corrections were carried out by classifying sensors to one of three categories (I, II, III) and then a specific set of coefficients was assigned for the static characteristics. The paper presents the detailed algorithm for the procedure including the method for determining the adjusted static characteristic coefficients. The coefficients were determined by the optimal value search method minimising along orthogonal directions. Approximately 20% of the test sample that contained 35 pcs sensors did not require correction. The accuracy of other sensors was improved three times at least by the correction applied.
Źródło:
Pomiary Automatyka Kontrola; 2012, R. 58, nr 1, 1; 19-22
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The measuring position designed to determine the metrological properties of air gauges
Autorzy:
Jakubowicz, M.
Derezynski, J.
Powiązania:
https://bibliotekanauki.pl/articles/102919.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
air gauges
static characteristics
metrology
Opis:
This article describes the measurement system designed in order to determine the metrological properties of air gauges. The said scientific study makes it possible to determine the static pk = f(s) and flow qv = f(s) characteristics. It consists of three modules: a mechanical module, a control and register data module and a special software module. Apart from the possibility of determining the static and flow characteristics, the presented study makes it possible to measure the temperature in the duct that supplies the compressed air to the transducer as well as in the measuring chamber. The above-mentioned measurement system makes it possible to determine the pressure applied on the surface measured by an air stream coming from the nozzle. Apart from a detailed description of a test station and the software, the article also contains sample results of tests performed on air gauges.
Źródło:
Advances in Science and Technology. Research Journal; 2017, 11, 4; 198-205
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies