Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "residual strength" wg kryterium: Wszystkie pola


Tytuł:
Analysis of residual strength of a helicopter tail boom
Autorzy:
Reymer, P.
Leski, A.
Powiązania:
https://bibliotekanauki.pl/articles/246055.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
residual strength
tail boom
crack tip opening angle
Opis:
The aim of this work is to determine the residual strength of a Mi-24 helicopter's tail boom with a structural damage. The idea of this work has come from the fact that these helicopters are operated on a battlefleld and often suffer such damages. It may be crucial to make a quick estimation whether any particular damage can cause a critical failure to the whole structure. The scope of this work covers static loading of the structure during landing. The analysis has been based on a numerical model that makes use of the Finite Element Method. The model has been developed using reverse engineering techniques. Structural discontinuities have been modelled in characteristic sections where stress concentrations occur. Boundary conditions and loads applied have been chosen to simulate normal and hard landings. Two failure criteria have been chosen: one based on the Crack Tip Opening Angle (CTOA) method that enables very efficient verification, and the second concerning the tail boom tip dislocation, taken from the helicopter,s alignment manual. The specific load history has been designed to enable detection of tail boom tip dislocation due to plastic strain in the vicinity of damage tips after the hard landing.
Źródło:
Journal of KONES; 2010, 17, 1; 343-349
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A modified model of residual strength prediction for metal plates with through-thickness cracks
Autorzy:
Li, Yanping
Wang, Jianjun
Guo, Weiguo
Guo, Jin
Powiązania:
https://bibliotekanauki.pl/articles/281643.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
residual strength
damage degree factor
crack
multiple site damage
Opis:
A new model, accurate and easy-to-apply, has been proposed to predict the residual strength for metal plates intact or with different damage degrees. In this model, we introduced the damage degree factor (DDF) to quantify the initial damage condition of a plate. The middle crack tension (M(T)) tests and multiple site damage (MSD) tension tests were performed on plate specimens in aluminum alloy LY12-CZ and 2524-T3, respectively. For various damage degrees, the predicted results of this new model showed an improved correlation with test results compared to the net section yield criterion, K-apparent criterion and Duong’s method.
Źródło:
Journal of Theoretical and Applied Mechanics; 2019, 57, 3; 537-547
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of bentonite addition on residual strength of microwave-hardened waterglass-containing moulding sands
Autorzy:
Stachowicz, M.
Granat, K.
Nowak, D.
Powiązania:
https://bibliotekanauki.pl/articles/381138.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
moulding sand
sodium waterglass
bentonite
residual strength
microwave hardening
masa formierska
szkło wodne sodowe
bentonit
wytrzymałość końcowa
hartowanie mikrofalowe
Opis:
The paper presents results of a preliminary research of the effect of bentonite addition on residual strength of microwave-hardened moulding sands, containing sodium waterglass. Strength was determined at ambient temperature, on cylindrical specimens baked in an oven. Moulding sands for examinations were based on high-silica sand with addition of 2.5 % of non-modified, domestic-made waterglass grade 145. The prepared standard cylindrical specimens were hardened using the innovative microwave heating process and next baked for 30 minutes at temp eratures between 100 and 1200 °C. Strength parameters of the specimens were determined on the specimens cooled-down to ambient temperature. The obtained results were compared with literature data to evaluate the effect of the applied hardening method and of the special additive on residual strength as a function of baking temperature. A favourable effect was found of both the innovative heating process and the applied bentonite addition.
Źródło:
Archives of Foundry Engineering; 2011, 11, 3 spec.; 199-204
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Residual strength and toughness after impact loading for RC slabs strengthened with different layers of geogrid
Autorzy:
Ahmed, Aya M. E.
Hamdy, Osman
Saad, Youssef L. Z.
Ahmad, Seleem S. E.
Powiązania:
https://bibliotekanauki.pl/articles/36064265.pdf
Data publikacji:
2023
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
impact load
geogrid
RC slab
residual strength
static flexural load
toughness
toughness index
Opis:
This study presents an experiment for investigating the residual strength and toughness of reinforced concrete, RC, and slab reinforced by a geogrid as shrinkage reinforcement along with lower tensile steel reinforcement. Three different parameters were considered, slab thickness, number of geogrid layers, and thickness of the upper concrete cover. Fifteen slab samples with sizes of 50 × 50 cm exposed to the impact load on its center before being re-load by the static load and six slab samples exposed to the static load only. The load and deflection relation were recorded through the static loading process for all specimens, where loading capacity, toughness, and toughness index were measured. The results show an enhancement in the slabs residual strength as the slab thickness and concrete cover increased. On the other hand, the residual strength of slabs has a remarkable decrease with the increase in geogrid layers. Moreover, the toughness has a positive relationship with the concrete cover and has an inverse relation with the slab thickness and the number of layers. A geogrid reduced the number and distribution of cracks and mitigated their severity, especially for double layers with the same concrete cover.
Źródło:
Scientific Review Engineering and Environmental Sciences; 2023, 32, 2; 117-134
1732-9353
Pojawia się w:
Scientific Review Engineering and Environmental Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Residual strength assessment of wind turbine rotor blade composites under combined effects of natural aging and fatigue loads
Autorzy:
Gao, Jian-Xiong
An, Zong-Wen
Ma, Qiang
Bai, Xue-Zong
Powiązania:
https://bibliotekanauki.pl/articles/1841943.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
wind turbine rotor blade
natural aging
fatigue loads
residual strength
composite material
Opis:
In this paper, the combined effects of natural aging and fatigue loads are considered to assess the residual strength of wind turbine rotor blade composites under actual service environments. Firstly, a comprehensive environmental factor (CEF) methodology is adopted to quantify the combined effects of environmental factors on residual strength. Meanwhile, the artificial accelerated aging test data are used to determine the weight coefficients of the CEF. Subsequently, a two-variable function is presented to characterize the relationship among residual strength, aging time and the CEF. The natural aging test data are utilized to estimate the unknown parameters of the two-variable function. Finally, the combined effects of natural aging and fatigue loads are considered, and a residual strength model is proposed to analyze the strength degradation behaviors of the wind turbine rotor blade composites. The results indicate that fatigue loads have negative effect on the residual strength, while natural aging has both positive and negative effects on the residual strength.
Źródło:
Eksploatacja i Niezawodność; 2020, 22, 4; 601-609
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Residual Ultimate Strength of Box Girders with Variable Cracks
Autorzy:
Ao, L.
Wang, D.
Powiązania:
https://bibliotekanauki.pl/articles/116262.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
cracks
Ship Stability
Hydrodynamics
Box Girders
FEA
Ultimate Strength
Residual Ultimate Strength
Crack Parameters
Opis:
The aim of the present study is to investigate the residual ultimate strength characteristics of box girders with variable cracks under torsional loading. A series of finite element models are established by changing the crack length and crack angle using a commercial FEA program, ABAQUS. The cracks are located at the center and torques are applied on both ends of the box beam. Different aspect ratios are considered to evaluate the effects of cracks on box beams for various widths and lengths of panels in the middle yielding region. The accuracy of the nonlinear FEA results is veri?ed by a comparison with previous predicted formulas. Based on the FEA results, the relationship between the residual ultimate strength and crack parameters can be indicated in a function with period of in the form of Fourier series.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2015, 9, 2; 193-198
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adhesion of structural steel to concrete with recycled crushed sanitary ceramics aggregate
Przyczepność stali konstrukcyjnej do betonu z kruszywem recyklingowym z ceramiki szlachetnej
Autorzy:
Ogrodnik, P.
Powęzka, A.
Ghamari, A.
Powiązania:
https://bibliotekanauki.pl/articles/28765737.pdf
Data publikacji:
2022
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
steel
concrete
recyclable material
residual strength
Źródło:
Acta Scientiarum Polonorum. Architectura; 2022, 21, 4; 33-40
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the Curing Process on the Fatigue Strength and Residual Strength of a Fiber Composite Estimation Using the Theory of Markov Chains
Autorzy:
Chatys, Rafał
Kłonica, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/2201932.pdf
Data publikacji:
2023
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
component of composite
destruction
fatigue strength
residual strength
curing process
Theory of Markov Chains
Markov chains
Opis:
The paper deals with the influence of quality failure of matrix post-curing on the strength of such complex and difficult "new generation" materials as fiber composites, especially those with polymer matrix. The performed statistical analysis of the components determined the complexity of the layered composite structure. And the developed model of the weakest micro-volume presented in this paper has helped to describe not only the pre-dictable strength of the laminate, but also the nature of failure, taking into account the fiber stresses and/or the distribution of end strains in the structure of the composite under consideration. The strength of fibre composi-te structures based on Markov chain theory takes into account technological aspects during the curing process. The presented model was verified on the basis of literature examples and experimental data obtained during the testing process. Numerical results show good agreement with literature examples and measured data. The pre-sented model may represent a novel method that provides further insight into the curing process of epoxy re-sins.
Źródło:
Advances in Science and Technology. Research Journal; 2023, 17, 2; 53--62
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczanie otworu ekwiwalentnego dla uszkodzeń poudarowych na podstawie badań wytrzymałości resztkowej
Determination of open hole equivalent to after impact damage based on residual strength tests
Autorzy:
Bajurko, P.
Powiązania:
https://bibliotekanauki.pl/articles/213171.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
otwór ekwiwalentny
wytrzymałość resztkowa
próby udarowe
delaminacja
laminat węglowo-epoksydowy
open hole equivalent
compressive residual strength
impact tests
delimination
carbon-epoxy laminate
Opis:
Prezentowane w artykule badania stanowią fragment prac, których celem było opracowanie wzorcowej metodyki oceny wpływu uszkodzeń na trwałość i wytrzymałość konstrukcji wykonanych z nowoczesnych materiałow kompozytowych. Prace te realizowano w Instytucie Lotnictwa w ramach projektu POIG TEBUK „Opracowanie technologii badań odporności na uszkodzenia lotniczych i kosmicznych kompozytowych struktur nośnych". W artykule zamieszczono porównanie wytrzymałości resztkowej prostokątnych próbek o wymiarach 150x100x3,96 mm po uderzeniu z energią 9 J i 18 J oraz czterech próbek z centralnie nawierconymi otworami o średnich 6,3 mm; 10 mm; 20 mm i 30 mm. Próbki wykonano z kompozytu węglowo-epoksydowego o konfiguracji zbrojenia tożsamej z układem warstw poszycia demonstratora TEBUK. Próbki po badaniach udarowych poddano badaniom ultradźwiękowym w celu określenia obrysu powstałej delaminacji. Zaprezentowano próby wyznaczenia średnicy otworu, który powoduje obniżenie wytrzymałości resztkowej do poziomu wytrzymałości, jaką ma próbka po uderzeniu z powyższymi energiami. Zebrane wyniki nie wystarczyły do jednoznacznego określenia średnicy ekwiwalentnego otworu, co spowodowane bylo brakiem wyraźnego związku między średnicą delaminacji/otworu a wytrzymałością resztkową badanych próbek.
Studies presented in this article are part of work conducted in order to develop a reference methodology for assessing the impact of damage to the durability and strength of structures made of advanced composite materials. This work was carried out under the project TEBUK "Development of the technology for testing the resistance to damage of aviation and space composite load bearing structures, which is carried out in the Institute of Aviation. The paper presents comparisons of residual strength of carbon-epoxy rectangular plate 150x100x3.96 mm with damage after impact (9 J and 18 J) and holes of different diameters (6.3 mm; 10 mm; 20 mm and 30 mm). Tested samples were made of carbon-epoxy composite with reinforcement configuration identical to the layer system of TEBUK demonstrator. Samples after the impact test were subjected to ultrasonic inspection in order to determine the outline of delamination. The aim of the present study was to determine the hole diameter, which reduces the residual strength to the strength level of impacted plate. The collected results were insufficient to uniquely identify an equivalent diameter of the hole, which was caused by the lack of a clear relationship between the diameter of the delami nation/hole and residual strength of the tested samples.
Źródło:
Prace Instytutu Lotnictwa; 2016, 3 (244); 18-25
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the shape of the impactor on residual strength, size and nature of damage to CFRP
Wpływ kształtu bijaka na wytrzymałość szczątkową, wielkość i charakter uszkodzeń CFRP
Autorzy:
Przybyłek, Paweł
Komorek, Andrzej
Kaczor Di Paola, Simone Taddeo
Komorek, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/31232913.pdf
Data publikacji:
2022
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
laminates
puncture resistance
impact strength
residual strength
bending strength
laminaty
odporność na przebicie
wytrzymałość na uderzenie
wytrzymałość resztkowa
wytrzymałość na zginanie
Opis:
The experimental tests presented in this work concern the impact resistance test and residual strength properties after an impact performed by a drop tower INSTRON CEAST 9340. The authors prepared samples of a composite material with a polymeric matrix L285 and H285 hardener, reinforced with eight ply fabric of carbon fibre. Two shapes of the impactor (spherical and V-shape) were used to perform the testing. The samples were impacted by three values of energy (10, 15, 20 [J]). Three-point bending tests were performed to the residual strength of the samples subjected to impact tests and compared to samples which had not been damaged earlier. The study showed differences in the influence of the shapes of the impactor on the nature of the composite damage. After the test, conclusions were drawn about the influence of the shape of the impactor on the area of composite damage and its character. Also, its influence on residual strength was described. Despite the clear differences in the area of damage to composites impacted by different impactors, this does not have a significant influence on the residual strength.
Przedstawione w pracy badania eksperymentalne dotyczą badania udarności oraz właściwości wytrzymałości szczątkowej po uderzeniu wieżą zrzutową INSTRON CEAST 9340. Autorzy przygotowali próbki materiału kompozytowego z osnową polimerową L285 i utwardzaczem H285, wzmocnionego tkaniną ośmiowarstwową z włókna węglowego. Do badań wykorzystano dwa kształty impaktora (kulisty i V). Próbki były poddawane działaniu trzech wartości energii (10, 15, 20 [J]). Próby zginania trzypunktowego przeprowadzono do wytrzymałości szczątkowej próbek poddanych próbom udarności i porównano z próbkami, które wcześniej nie uległy uszkodzeniu. Badania wykazały różnice we wpływie kształtów impaktora na charakter uszkodzenia kompozytu. Po przeprowadzeniu badań wyciągnięto wnioski dotyczące wpływu kształtu impaktora na obszar uszkodzenia kompozytu i jego charakter. Opisano również jego wpływ na wytrzymałość resztkową. Pomimo wyraźnych różnic w obszarze uszkodzeń kompozytów pod wpływem różnych impaktorów, nie ma to istotnego wpływu na wytrzymałość szczątkową.
Źródło:
Technologia i Automatyzacja Montażu; 2022, 4; 46-53
2450-8217
Pojawia się w:
Technologia i Automatyzacja Montażu
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies