Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "mineral matter" wg kryterium: Wszystkie pola


Tytuł:
Mineral matter in municipal solid waste
Autorzy:
Sniadecka, N.
Tonderski, A.
Hanel, A.
Wojda-Gburek, J.
Hupka, J.
Powiązania:
https://bibliotekanauki.pl/articles/110706.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
mineral matter
municipal waste
separation technologies
size distribution
Opis:
Municipal solid waste (MSW) contains mineral materials which are seldom considered as a potential resource. Currently, the waste management sector pays attention to recyclable parts, biodegradable material, waste-to-energy fraction, and residues after waste reuse and recycle. In contrast, this study focus as on the mineral matter in MSW. The aim was to analyze and discuss the sources of mineral matter in MSW, the impact which the minerals have on waste management technologies, and finally, the possibility to recycle the mineral matter. The contribution of inorganic matter in the MSW stream is significant (about 20 wt.%). In the years 2012–2015, the average content of mineral matter in mixed MSW in Poland ranged from 16 wt.% to 36 wt.%, and the content of organic in MSW ranged from 20 wt.% to 42 wt.%. Minerals in MSW have rather negative impact on waste management technologies and their final products, and can be sorted out from the MSW stream, either in the households or in a central sorting line. However, in central collection and separation systems it is difficult to obtain a mineral matter fraction in subsequent processing steps due to technological limitations (inefficiency of devices), high degree of waste fragmentation and pollution of mineral matter with other waste. This indicates a hampered ability to separate minerals in a form available for reuse, so an effective system should be based on improved segregation at the source.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 2; 973-990
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mineral matter transformation in oxy-fuel coal combustion
Autorzy:
Nowak-Woźny, D.
Moroń, W.
Urbanek, B.
Rybak, W.
Powiązania:
https://bibliotekanauki.pl/articles/185717.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
coal combustion
ash
slagging
sintering
spalanie węgla
popiół
żużlowanie
spiekanie
Opis:
The paper presents the results of the mechanical, electrical, CCSEM and XRD measurements of hard coal, conducted in simulated conditions of sintering in atmospheres of O2/CO2,. The changes of the coal ash resistivity are correlated with the content of the oxides and with the sintering temperature determined by the mechanical test and Leitz method. The SEM-EDS analysis was conducted for deposits on the probe. The changes of the measured ash samples, observed during sintering process in O2/CO2 atmosphere, were discussed in the ash microstructure point of view.
Źródło:
Chemical and Process Engineering; 2013, 34, 3; 393-401
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of coal mineral matter liberation efficiency index
Ocena stopnia uwolnienia frakcji mineralnej węgla
Autorzy:
Surowiak, A.
Powiązania:
https://bibliotekanauki.pl/articles/319165.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
liberation efficiency
hard coal
particle size distribution
particle density distribution
stopień uwolnienia
węgiel kamienny
skład ziarnowy
skład densymetryczny
Opis:
The main tool allowing to forecast effects of gravitational beneficiation of hard coals is density analysis. The obtained results of such analysis should show real minerals liberation level in connection with their physical properties. In purpose of calculating mineral phase liberation from hard coal the size and density analysis was performed for raw hard coal which was feed directed to mineral processing. For each obtained size-density fraction its yield and ash contents were determined. The Hall’s separation curve was used in the paper to evaluate liberation efficiency of mineral phase from hard coal. The advantage of this curve is the fact that it is possible to describe it mathematically by means of hyperbolic equation. It was stated that if particle size is lower the liberation level of mineral substance grows.
Podstawowym narzędziem pozwalającym prognozować efekty wzbogacania grawitacyjnego węgli kamiennych jest analiza densymetryczna. W związku z tym otrzymane wyniki takiej analizy powinny odzwierciedlać rzeczywisty stopień uwolnienia minerałów w powiązaniu z ich właściwości fizycznymi. W celu wyliczenia uwolnienia fazy mineralnej z węgla kamiennego wykonano analizę granulometryczną i densymetryczną surowego węgla kamiennego – nadawy kierowanej do przeróbki mechanicznej. W otrzymanych klaso-frakcjach wyliczono wychody oraz oznaczono zawartość popiołu. W artykule wykorzystano krzywą separacji Halla do oceny stopnia uwolnienia frakcji mineralnej z węgla kamiennego. Zaletą krzywej separacji Halla jest to, że można ją opisać w sposób matematyczny przy pomocy równania hiperboli. Stwierdzono, że ze wraz z zmniejszaniem się wielkości ziaren wzrasta stopień uwolnienia substancji mineralnej.
Źródło:
Inżynieria Mineralna; 2013, R. 14, nr 2, 2; 153-158
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of mineral matter content on specific density of forest biomass
Wpływ zawartości substancji mineralnych na gęstość właściwą biomasy pochodzenia leśnego
Autorzy:
Nurek, T.
Roman, K.
Powiązania:
https://bibliotekanauki.pl/articles/56423.pdf
Data publikacji:
2014
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
mineral content
forest biomass
biomass
specific density
ash content
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Agriculture; 2014, 64 Agric.Forest Eng.
0208-5712
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Agriculture
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Composition and morphology of organic and mineral matter in fly ash derived from bituminous coal combusted in the Będzin power station (Poland)
Autorzy:
Smołka-Danielowska, D.
Misz, M.
Powiązania:
https://bibliotekanauki.pl/articles/1204893.pdf
Data publikacji:
2002
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
coal
pulverised fuel combustion
fly ash
chars
mineral matter
Opis:
Fly ash particles formed during coal combustion are composed entirely of organic or/and mineral matter. The proportions of the two components depends on combustion conditions and the presence of minerals in feed coal particles. The aims of this paper are the classification of char morphologies, the quantification of the inert- and semiinert components, and the characterisation of the morphologies and compositions of mineral particles in fly ash from Będzin Power Station, Poland. Various char morphologies are presented and their distribution in individual pulverised fuel boilers is discussed as are the morphologies of mineral particles and the distribution of major and minor elements in different size fractions of fly ash.
Źródło:
Polish Geological Institute Special Papers; 2002, 7; 237-244
1507-9791
Pojawia się w:
Polish Geological Institute Special Papers
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dielectric properties of coal ash
Autorzy:
González Valdes, Laura
Friis Aage, Valentin
Nowak-Woźny, Dorota
Powiązania:
https://bibliotekanauki.pl/articles/1818164.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal
mineral matter transformation
ash sintering
dielectrical properties
Opis:
Mineral matter of coal causes serious operational problems related to ash de- position in coal fired power plants such slagging and fouling, and so it has become the main subject of study in terms of current utilization. Moreover, the standardized tests currently used as the preferred predictive tools for slagging properties of coal sources have been lately reproved in the literature and un- certainties arrive due to the poor repeatability and reproducibility. That is why, methods for determining the sintering temperatures are being extensively investigated across the industry. This study focuses on the electrical properties of coal ash and its relation to the ash sintering process, where physical and chemical processes take part inside the material. The following methodology is based upon the continuous registration of the changes of resistance measured as an AC and DC property. The proposed laboratory stand allows measuring ‘in situ’ a coal ash sample being heated to analyse its electrical properties. It was found that the values measured are temperature dependent and could reflect the chemico-physical changes in the material, which may directly suggest the transformation of the intrinsic properties, giving insight into the sintering process.
Źródło:
Zeszyty Energetyczne; 2018, 5; 51--60
2658-0799
Pojawia się w:
Zeszyty Energetyczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alkalis in coal and coal cleaning products
Alkalia w węglu i produktach jego wzbogacania
Autorzy:
Bytnar, K.
Burmistrz, P.
Powiązania:
https://bibliotekanauki.pl/articles/218974.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
proces wzbogacania
substancja mineralna
węgiel
coal
cleaning process
alkalies
mineral matter
Opis:
In the coking process, the prevailing part of the alkalis contained in the coal charge goes to coke. The content of alkalis in coal (and also in coke) is determined mainly by the content of two elements: sodium and potasium. The presence of these elements in coal is connected with their occurrence in the mineral matter and moisture of coal. In the mineral matter and moisture of the coals used for the coke production determinable the content of sodium is 26.6 up to 62. per cent, whereas that of potassium is 37.1 up to 73.4 per cent of the total content of alkalis. Major carriers of alkalis are clay minerals. Occasionally alkalis are found in micas and feldspars. The fraction of alkalis contained in the moisture of the coal used for the production of coke in the total amount of alkalis contained there is 17.8 up to 62.0 per cent. The presence of sodium and potassium in the coal moisture is strictly connected with the presence of the chloride ions. The analysis of the water drained during process of the water-extracting from the flotoconcentrate showed that the Na to K mass ratio in the coal moisture is 20:1. Increased amount of the alkalis in the coal blends results in increased content of the alkalis in coke. This leads to the increase of the reactivity (CRI index), and to the decrease of strength (CSR index) determined with the Nippon Steel Co. method.
W procesie koksowania przeważająca część zawartych we wsadzie węglowym alkaliów przechodzi do koksu. Zawartość alkaliów w węglu, a co za tym idzie i w koksie determinowana jest głównie zawartością dwóch pierwiastków: sodu i potasu. Obecność tych pierwiastków w węglu wiąże się z występowaniem ich w substancji mineralnej i wilgoci węgla. W substancji mineralnej oraz wilgoci węgli stosowanych do produkcji koksu, oznaczona zawartość sodu wynosi od 26.6 do 62.9%, a zawartość potasu od 37.1 do 73.4% alkaliów ogółem. Głównymi nośnikami alkaliów w substancji mineralnej są minerały ilaste, sporadycznie też miki oraz skalenie. Udział alkaliów zawartych w wilgoci węgli stosowanych do produkcji koksu w ogólnej ilości zawartych w nim alkaliów wynosi dla badanych węgli od 17.8 do 62.0%. Obecność sodu i potasu w wilgoci węgla związana jest wyłącznie z obecnością w niej jonów chlorkowych. Wyniki analizy wody odprowadzanej z procesu wirowania flotokoncentratu wskazują, że stosunek masowy Na do K w wilgoci węgla wynosi 20:1. Wzrost zawartość wilgoci w koksie będący wynikiem ich zwiększonej ilości w mieszance węglowej prowadzi do wzrostu reaktywności (wskaźnik CRI) oraz spadku wytrzymałości (wskaźnik CSR) oznaczonych metoda Nippon Steel Co.
Źródło:
Archives of Mining Sciences; 2013, 58, 3; 913-924
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ wysokości opadu na wymywanie substancji organicznych i mineralnych z gleb uprawnych
The effect of rainfall amount on organic and mineral matter elution from arable soils
Autorzy:
Koc, J.
Ciecko, C.
Janicka, R.
Rochwerger, A.
Solarski, K.
Powiązania:
https://bibliotekanauki.pl/articles/809209.pdf
Data publikacji:
1998
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Opis:
The concentration and the load of organic and mineral matter in water (lowing out from rural areas during a wet and a very dry years has been researched. Some drained and not drained areas were chosen. It was stated that the concentration of the matter in water depends on grain-size distribution (higher values in light soils), dewatering intensity (higher values in drainage water than in ditch water) as well as rainfall quantity (higher values over the dry year). The amount of eluted matter was dependent, first of all, on the grain-size distribution of soil (higher values were observed in light soil) and the water outflow which is highly correlated to rainfall quantity and a kind of drainage system. During the wet year 13 kg C, 245 kg Ca, 27 kg Mg, 25 kg Na, 18 N-NO₃, 13 kg K, 1.1 kg N-NH₄ and 0.4 kg P were eluted from light soil and 3.7 kg C, 82 kg Ca, 12 kg Mg, 9 kg Na, 3 kg K, 3.4 kg N-NO₃, 0.5 kg N-NH₄ and 0.15 kg P were eluted from heavy soil. The elution from light soil during the very dry year was as follows: 4.1 kg C, 68 kg Ca, 7 kg Mg, 11 kg K, 10 kg Na, 7 kg N-NO₃, 0.5 kg N-NH₄ and 0.3 kg P from heavy one: 1.6 kg C, 17 kg Ca, 2 kg Mg, 2 kg Na, 0.7 kg K, 0.4 N-NO₃, 0.07 kg N-NH₄ and 0.03 kg P.
Źródło:
Zeszyty Problemowe Postępów Nauk Rolniczych; 1998, 456
0084-5477
Pojawia się w:
Zeszyty Problemowe Postępów Nauk Rolniczych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zmiana składu chemicznego popiołu i poprawa właściwości energetycznych słomy zbożowej w wyniku jej wielokrotnego moczenia w wodzie
Changes in the chemical composition of ash and the enhancement of energy properties of cereal straw as a result of its multiple water washing
Autorzy:
Rozwadowski, A.
Dziok, T.
Powiązania:
https://bibliotekanauki.pl/articles/282878.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
biomasa roślinna
substancja mineralna
popiół
chlor
alkalia
wypłukiwanie
biomass
mineral matter
ash
chlorine
alkali
washing
Opis:
W artykule przedstawiono wyniki badań laboratoryjnych procesu wielokrotnego moczenia wodą słomy, którą pozyskano z pszenicy ozimej ściętej w końcowym okresie jej dojrzewania. Dla próbek słomy surowej oraz wielokrotnie moczonej i suszonej po każdym zabiegu moczenia wykonano analizę techniczną i elementarną, zbadano skład chemiczny popiołu otrzymanego z badanej słomy oraz przeprowadzono analizę chemiczną wody oddzielonej od biomasy w poszczególnych cyklach moczenia. Przeprowadzone badania pozwoliły ocenić wpływ operacji wielokrotnego moczenia i suszenia na zmianę właściwości fizykochemicznych, które determinują przydatność słomy jako surowca w procesach spalania i zgazowania. Badania wykazały, że stosując operacje wielokrotnego moczenia i suszenia świeżej słomy zbo- żowej można z niej usunąć niepożądane składniki, które wchodzą w skład substancji mineralnej. Składniki te pobierane są przez rośliny z podłoża podczas wegetacji w formie tzw. roztworów glebowych. W wyniku wielokrotnego moczenia w wodzie wymywane były ze słomy znaczne ilości jonów chlorkowych oraz związki zawierające siarkę i fosfor. Ponieważ w popiele preparowanej wodą biomasy zmniejszyła się jednocześnie zawartość metali alkalicznych można sądzić, iż do wody przechodziły dobrze rozpuszczalne w wodzie chlorki potasu i sodu. Redukcja rozpuszczalnych w wodzie soli przyczyniła się do zmniejszenia zawartości popiołu w badanej słomie i z punktu widzenia temperatur jego topliwości korzystnie wpłynęła na jego skład chemiczny. Podczas zabiegu wielokrotnego moczenia ze słomy oprócz składników substancji mineralnej usuwane były związki organiczne. Wskazywały na to wysokie wartości wskaźnika ChZT wody po kolejnych zabiegach moczenia. Były to najprawdopodobniej produkty fotosyntezy wypłukane z tkanek pszenicy skoszonej w końcowej fazie dojrzewania. Ich wymycie ze słomy miało wpływ na wyniki analizy elementarnej. Stwierdzono, że w czasie moczenia zmniejszała się w słomie zawartość wodoru i siarki całkowitej, wzrastała natomiast zawartość węgla pierwiastkowego. Zmiany składu elementarnego były powodem nieznacznego obniżenia kaloryczności moczonej w wodzie słomy.
In the paper, the laboratory results of the process of multiple straw water washing are presented. The analyzed straw was obtained from winter wheat mowed at the final stage of vegetation. The proximate and ultimate analysis was conducted for raw straw as well as for washed straw and the chemical composition of ash was determined. The chemical analysis of water from straw washing was also performed. The conducted studies allowed for the assessment of the influence of the processes of multiple washing and drying of straw on the physicochemical properties determining its use as feedstock in the combustion and gasification processes. Studies have shown that the undesirable components of mineral matter could be removed in the multiple water washing and drying of straw processes. These components are taken by plants from the ground during vegetation. As a result of multiple straw water washing, significant amounts of chlorine ions and sulfur and phosphorus compounds were leached. Simultaneously, a decrease in the content of alkali metals was noticed in the ash of the washed straw. This suggests that water-soluble sodium and potassium chlorides were leached. The reduction of the content of water-soluble salts contributed to the decrease in the ash content. Organic compounds were also leached during the multiple straw water washing process. This was indicated by high values of the chemical oxygen demand (COD) in the water after straw washing. They most probably were the products of the photosynthesis process which were leached from the wheat tissues. Their removal from the straw had an impact on the ultimate analysis. A decrease in the content of hydrogen and total sulfur as well as an increase in carbon content was noticed during the straw washing process. Changes in elemental composition were the reason for a slight decrease in the calorific value of the washed straw.
Źródło:
Polityka Energetyczna; 2017, 20, 1; 117--134
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka petrograficzna oraz oznaczenie rtęci w węglu z pokładu 207 (Górnośląskie Zagłębie Węglowe)
Petrographic characterization and mercury content of coal seam No. 207 (Upper Silesian Coal Basin)
Autorzy:
Kasprzyk, M.
Jelonek, I.
Jelonek, Z.
Powiązania:
https://bibliotekanauki.pl/articles/394909.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
węgiel kamienny
macerały
mikrolitotypy
rtęć w węglu
materia mineralna
hard coal
macerals
microlithotypes
mercury in coals
mineral matter
Opis:
W artykule przedstawiono wybrane metody petrograficzne: analizę macerałową, analizę mikrolitotypów, obserwacje we fluorescencji oraz pomiary refleksyjności. Scharakteryzowano materię mineralną występującą w profilu pokładu 207. Oznaczono zawartość rtęci w pokładzie. Na podstawie wykazanych korelacji pomiędzy zawartością rtęci w węglu a zawartością materii mineralnej i materii organicznej można stwierdzić, że wyższa koncentracja rtęci występuje w próbkach zasobnych w materię mineralną.
The article presents selected methods: maceral analyses, microlithotype analyses and observation in fluorescence light and reflectance measurements. The mineral matter occurring in coal seam 207 was characterized. The content of mercury in the coal seam was determined. A, significant correlation was established between mercury in coal and the content of mineral matter in coal on the basis of the demonstrated correlation coefficient and it can be ascertained that a higher concentration of mercury occurs in samples abundant in mineral matter.
Źródło:
Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią PAN; 2016, 96; 105-117
2080-0819
Pojawia się w:
Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią PAN
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena przydatności polskich węgli do procesu zgazowania
Assessment of Polish coal’s suitability for the gasification process
Autorzy:
Porada, S.
Grzywacz, P.
Czerski, G.
Kogut, K.
Makowska, D.
Powiązania:
https://bibliotekanauki.pl/articles/282651.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
zgazowanie węgla
reaktory zgazowania
reakcyjnoość węgla
podatność przemiałowa
substancja mineralna
coal gasification
gasifiers
coal reactivity
grindability
mineral matter
Opis:
Bezpieczeństwo energetyczne Polski, jak i świata uzależnione jest od racjonalnego wykorzystania węgla, a jednym z najbardziej perspektywicznych kierunków jego energochemicznego przetwórstwa jest proces zgazowania. Obecnie węgiel, obok ropy naftowej, gazu ziemnego, odpadów przemysłu rafineryjnego i biomasy, jest surowcem najczęściej używanym do zgazowania. W pracy przedstawiono aktualny stan zasobów węgla kamiennego i brunatnego w Polsce przydatnych do tego procesu. Omówiono charakterystykę reaktorów zgazowania ze szczególnym uwzględnieniem wymagań stawianych surowcom. Scharakteryzowano również najistotniejsze parametry jakościowe stosowane podczas oceny przydatności węgli do procesu zgazowania. Polska dysponuje dużymi złożami węgla zarówno kamiennego, jak i brunatnego, które można wykorzystać do procesu zgazowania. Biorąc pod uwagę reakcyjność węgla za najbardziej przydatne do zgazowania należy uznać węgle brunatne i kamienne węgle energetyczne, odpowiadające w polskiej klasyfikacji typom 31 i 32. W przypadku konieczności rozdrabniania węgla przed procesem zgazowania istotną rolę odgrywa podatność przemiałowa, która oprócz znaczenia technologicznego jest ważnym wskaźnikiem ekonomicznym przekładającym się na koszty operacyjne. Właściwościami mającymi istotny wpływ na efektywność pracy wszystkich grup reaktorów zgazowania jest przede wszystkim temperatura topnienia popiołu oraz w przypadku reaktorów dyspersyjnych dodatkowo lepkość żużla. W przypadku dużej zawartości wilgoci w węglu do zgazowania konieczne jest podsuszanie wsadu.
The energy security of Poland and of the world is dependent on the rational use of coal. The gasification process is one of themost promising directions of chemical processing of coal. Currently, coal is the most widely used raw material for gasification apart from petroleum, natural gas, pet-coke, and biomass. This paper presents the current state of resources of bituminous coal and lignite in Poland useful for the gasification process. It describes the characteristics of gasifiers, with particular emphasis on the requirements for raw materials inputs. The analysis characterizes the most important quality parameters used in the evaluation of the suitability of coals for the gasification process. Poland has large coal resources of both bituminous and lignite coals which can be used for the gasification process. Considering the reactivity of coal as a criterion, the most suitable coals for gasification are lignite coals and steam coals of types 31 and 32 according to the Polish classification of bituminous coals. If pre-gasification process grinding of coal is needed, the grindability of coal plays an important role, having technological and economic importance. The melting point of the ash is a property having a significant impact on the efficiency of all types of gasifiers. Additionally, in the case of entrained flow gasifiers, slag viscosity is an important parameter to consider. Coal drying before the gasification process is needed when there is a high moisture content.
Źródło:
Polityka Energetyczna; 2014, 17, 4; 89-102
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Risks of boiler operation during slagging and fouling process – a new methods for the determination of ash sintering temperatures
Autorzy:
Urbanek, B.
Szydełko, A.
Czajka, K.
Powiązania:
https://bibliotekanauki.pl/articles/115821.pdf
Data publikacji:
2013
Wydawca:
Fundacja na Rzecz Młodych Naukowców
Tematy:
mineral matter
sintering
fouling
Leitz test
strength method
pressure-drop method
materia mineralna
proces spiekania
zanieczyszczenia
test Leitz
metoda sił
metoda spadku ciśnienia
Opis:
The properties of mineral matter occurs in coal in the form of inorganic compounds leads to slagging and fouling process on boiler heating surfaces, burners and ash hopper. The deposition of ash cause many undesirable phenomena such as heat transfer deterioration, damage to internal parts of the boiler as a result of detachment of large agglomerates and finally, costly shutdowns of the boiler. Standardized method of risk assessment of agglomerates formation and sintered fly ash is determined by four melting temperatures of ash. This measurement is based on visual appraisal of ash sample deformation which is subjective and strongly depends on the experience of the person conducting the test. Especially is hard predict the first two temperatures: deformation and sintering. An article has to present three non-standardized methods for determining the sintering temperature by using physical parameters: pressure drop and minimum force of probe destruction. This type of measurement allows a quantitative way to obtain reliable and meaningful result. The experiment showed that the results of non-standard methods deviate from those set using the Leitz method. This allows to conclude that sintering processes occur at much lower temperatures and changing the shape of the initial (test method Leitz) is not the first symptom of demonstrating the melting of the ash.
Źródło:
Challenges of Modern Technology; 2013, 4, 2; 47-52
2082-2863
2353-4419
Pojawia się w:
Challenges of Modern Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The role of mineral matter in the concentration of phosphorus in bituminous coal seams from the Lublin Formation in the Lublin Coal Basin in Poland
Rola substancji mineralnej w koncentrowaniu fosforu w pokładach węgla kamiennego z formacji Lublina w Lubelskim Zagłębiu Węglowym w Polsce
Autorzy:
Parzentny, H. R.
Powiązania:
https://bibliotekanauki.pl/articles/216416.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
koncentracja fosforu
pokład węgla
Lubelskie Zagłębie Węglowe
phosphorus concentration
bituminous coal
coal seam
Lublin Coal Basin
Opis:
The study included bituminous coal seams (30 samples coal from the Bogdanka and Chełm deposits) of the Lublin Formation, the most coal-bearing strata in the best developed and recognized in terms of mining parts of the Lublin Coal Basin in Poland. High phosphorus concentrations in coal of the Lublin Formation were found (1375 g/Mg) as well as P2O5 in coal ash (2.267 wt%). The phosphorus contents in coal and coal ash from the 385 and 391 coal seams in the area of the Lubelski Coal Bogdanka Mine and in the area of its SE neighbor is the highest (max. 2.644 wt. % in coal and 6.055 wt. % of P2O5 in coal ash). It has been shown that mineral matter effectively affects phosphorus contents in coal and coal ash. At the same time, phosphate minerals (probably apatite and crandallite) present in kaolinite aggregates of tonsteins contain the most of phosphorus and have the greatest impact on the average P content in the 382, 385, 387, and 391. The secondary source of phosphorus in these coal seams and main source of phosphorus in these coal deposits that do not contain mineral matter of pyroclastic origin (378, 389, 394) may be clay minerals, which absorbed phosphorus compounds derived from organic matter released during coalification. Phosphorus-rich ash from the combustion of the Lublin Formation coal tend to be environmentally beneficial to the environment and also useful for improving the soil quality. Due to the low degree of coalification and high content of phosphorus in coal, this coals of little use for coking.
Badaniami objęto pokłady węgla kamiennego (30 próbek ze złoża Bogdanka i złoża Chełm) z formacji Lublina, najbardziej węglonośnej i najlepiej pod względem górniczym rozpoznanej części Lubelskiego Zagłębia Węglowego (LZW). Stwierdzono dużą zawartość fosforu w węglu (1375 g/Mg) i P2O5 w popiele węgla (2,267 % wag.). Zawartość fosforu w węglu i w popiele węgla z pokładu 385 i 391 w rejonie kopalni Lubelski Węgiel Bogdanka i w obszarze z nią sąsiadującym od południowo-wschodniej strony jest najwyższa (max. 2,644% w węglu i 6,055% P2O5 w popiele węgla). Wykazano decydujący wpływ materii mineralnej na zawartość fosforu w węglu z formacji Lublina i w popiele węgla. Przy czym minerały fosforanowe (prawdopodobnie apatyt i crandallit), obecne w agregatach kaolinitu w tonsteinach, zawierają najwięcej fosforu i mają największy wpływ na średnią zawartość fosforu w węglu z pokładów 382, 385, 387 i 391. Drugorzędnym źródłem fosforu w węglu wymienionych pokładów oraz głównym źródłem fosforu w węglu z pokładów niezawierających materii mineralnej pochodzenia piroklastycznego (378, 389, 394) są prawdopodobnie minerały ilaste, które zaabsorbowały związki fosforu pochodzące z materii organicznej, uwolnione w czasie uwęglania substancji roślinnej. Bogate w fosfor popioły pochodzące ze spalania węgla z formacji Lublina wydają się być ekologicznie korzystne dla środowiska i jednocześnie przydatne do poprawy jakości gleb. Ze względu na niski stopień uwęglenia i dużą zawartość fosforu w węglu, węgiel ten jest mało przydatny do koksowania.
Źródło:
Gospodarka Surowcami Mineralnymi; 2018, 34, 3; 53-70
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Seasonal changes in labile organic matter, mineral nitrogen, and N2O emission in a loamy sand Orthic Luvisol cultivated under three management practices
Autorzy:
Dabek-Szreniawska, M.
Balashov, E.
Powiązania:
https://bibliotekanauki.pl/articles/25164.pdf
Data publikacji:
2007
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
organic matter
soil quality
emission
loamy sand
labile organic matter
management practice
nitrogen dioxide
seasonal change
growing period
Źródło:
International Agrophysics; 2007, 21, 2
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Reactive Phosphorus (Rp) Concentrations on Occurrence of Heterotrophic Bacteria Capable of Matter Transformation, Including Phosphorus in Water Environment
Wpływ stężeń reaktywnych form fosforu na występowanie w środowisku wodnym bakterii heterotroficznych zdolnych do przemian materii zawierającej fosfor
Autorzy:
Walczak, M.
Swiontek-Brzezińska, M.
Powiązania:
https://bibliotekanauki.pl/articles/389658.pdf
Data publikacji:
2009
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
fosfor
woda
uwalnianie z materii mineralnego fosforu
bakterie heterotroficzne
phosphorus in water
release of mineral phosphorus from matter
heterotrophic bacteria
Opis:
This survey has been aimed at estimation of the Vistula water number of heterotrophic bacteria, capable of decomposition of various phosphorus compounds, both organie and inorganic ones, as well as determination of bacteria participation in biogeochemical phosphorus cycle. The studies were conducted from spring 2000 to spring 2001. The water for analyses was sampled from three current sites of the Włocławek Reservoir along former bed of the Vistula River. In this studies has been estimated number of heterotrophic bacteria, capable to release mineral phosphorus from organie and inorganic matter. The result of the conducted study demonstrated that the key role in recovery of biologically available phosphorus amounts is the one of bacteriological phosphatases.
Celem pracy było oznaczenie liczebności bakterii heterotroficznych w wodzie Wisły, zdolnych do rozkładu różnych związków fosforu zarówno organicznych, jak i nieorganicznych oraz określenie udziału bakterii w cyklu biogeochemicznym fosforu. Badania prowadzono od wiosny 2000 r. do wiosny 2001 r. Próbki wody do badań pobierano z trzech stanowisk nurtowych Zbiornika Włocławskiego wzdłuż dawnego koryta rzeki Wisły. W badaniach oznaczano liczebność bakterii heterotroficznych zdolnych do uwalniania mineralnego fosforu z materii organicznej i nieorganicznej. Wyniki przeprowadzonych badań wskazują, że najważniejszą rolę w odbudowie dostępnej biologicznie puli mineralnego fosforu odgrywają bakteryjne fosfatazy.
Źródło:
Ecological Chemistry and Engineering. A; 2009, 16, 7; 875-881
1898-6188
2084-4530
Pojawia się w:
Ecological Chemistry and Engineering. A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies