Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "internal combustion" wg kryterium: Wszystkie pola


Tytuł:
Internal combustion micro-chambers and micro-engines
Autorzy:
Kraszewska, H.
Rusin, M.
Powiązania:
https://bibliotekanauki.pl/articles/244746.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
internal combustion engine
microengine
shaft less engine
combustion chamber
Opis:
Technological progress caused miniaturization of internal-combustion engines. They found application in many areas. The acquaintance of the ignition and combustion processes in the small volumes, the solution of the problem of piston movement under the influence of a pulse combustion in chambers, the choice of materials and problems related with the mixtures and exhaust creation, all these issues require a exact acquaintance for the purpose of optimization of the micro engine performance. In the paper, some issues are talked over on the base of investigations performed on the small volume chambers in single compression machines and in the shaftless two-cycle engine. Researched was the influence of the micro chamber size and of the area/volume ratio value on the processes of combustion occurring in the very small volumes and with the large values of area/volume ratio. Together with raise of the area/volume ratio, the value of the combustion pressure impulse becomes lower. The influence of the chamber material type on the combustion processes was defined, both in the single compression machine as in the micro engine. The existence of micro chamber size influence on the combustion limits of the fuel/air mixtures was designated. It has been determined that the range of the combustion limit is decreased with diminishing of the combustion chamber diameter, at the same time these changes are not the function of the area/volume ratio value changes. The maximum values of the combustion pressure appeared when chamber was supplied with stoichiometric mixture, irrespective of the chamber dimensions.
Źródło:
Journal of KONES; 2008, 15, 4; 283-288
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rational Liquid Cooling Systems of Internal Combustion Engines
Autorzy:
Moshentsev, Yuryi
Gogorenko, Oleksiy
Dvirna, Olha
Powiązania:
https://bibliotekanauki.pl/articles/2022422.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
charge air cooler
cooling systems
heat transfer surface
Internal combustion engines
oil coolers
low-flow system
Opis:
The scheme of the cooling system is considered, which can be the basis for creating the most efficient cooling systems for IC engines of any purpose. It is assumed that the use of any other scheme is devoid of a rational basis. The scheme consists of two connected circulation circuits, in one of which the coolant flow rate is an order of magnitude less than in the second. The engine is included in a circuit with increased coolant flow. All heat exchangers are in the second circuit. Rules for the formation of such systems are formulated. The basis of the method for calculating such systems is considered. It is indicated that the flow rate through each heat exchanger must be determined by calculation to ensure the maximum efficiency of the cooling system. The considered scheme allows to provide the maximum possible depth of charge air cooling, if its temperature is not specified, or to ensure the minimum cost and compactness of the cooling system, if this temperature is known. The scheme allows regulating the temperatures of the cooling fluids of the system with all kinds of changes in the engine operating conditions and the ambient temperature.
Źródło:
Advances in Science and Technology. Research Journal; 2022, 16, 1; 158-169
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling of the internal combustion engine cooling system
Autorzy:
Kneba, Zbigniew
Powiązania:
https://bibliotekanauki.pl/articles/240510.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
modeling
combustion engine
cooling system
modelowanie
silnik spalinowy
instalacja chłodnicza
Opis:
The article concerns computer modelling of processes in cooling systems of internal combustion engines. Modelling objectives and existing commercial programs are presented. It also describes Author’s own method of binding graphs used to describe phenomena in the cooling system of a spark ignition engine. The own model has been verified by tests on the engine dynamometer. An example of using a commercial program for experimental modelling of an installation containing a heat accumulator is presented.
Źródło:
Archives of Thermodynamics; 2019, 40, 3; 109-121
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Database of reciprocating internal combustion engines selected manufacturers
Autorzy:
Monieta, J.
Sendecki, A.
Powiązania:
https://bibliotekanauki.pl/articles/248020.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
reciprocating marine engines
selected producers
technical parameters
database
Opis:
During research works concerning piston internal-combustion engines specifications of these objects are often needed. This data is usually dispersed and reaching to some is hampered or impossible. Therefore, an electronic database was drawn up about the most important ship producer’s piston internal-combustion engines for needs of exploitation investigations in the destination of gathering the necessary information. This paper presents a database of global marine diesel engines. For example, engines of the following companies were described: Akasaka Diesel, CAT, Cummins, Fiat, Hyundai, MTU, Niigata Power Systems, Pielstick, Scania, Volvo Penta etc. Information was obtained from various sources, so as websites of producers, advertising catalogues, or books and magazines about subject matter associated with marine diesel engines. This information was collected and written with the help of the program Microsoft Office. Gathered data was divided in engines of the main drive and emergency, containing details about producers, types and parameters of 2-stroke engines and four-stroke. The base enables supplementing and the alteration of entered data. Produced engines are usually operated by several dozen years after producing on swimming objects. Produced internal combustion engines are usually operated by several dozen years after producing on floating objects, and producers are merging or are stopping existing.
Źródło:
Journal of KONES; 2016, 23, 1; 231-238
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An internal combustion engine without a crankshaft. Perspectives
Autorzy:
Tikhonenkov, Serguei
Powiązania:
https://bibliotekanauki.pl/articles/2097479.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
engine
fuel efficiency
global warming
pollution
silnik
wydajność paliwowa
globalne ocieplenie
zanieczyszczenie
Opis:
The article examines the level of perfection of the modern internal combustion engine design, their impact on the environment and population. A new engine concept has been developed. As a result a decrease in fuel consumption by 80% has been discovered as well as the effects of the new engine in the field of ecology such as a decrease in the number of diseases caused by poor environmental conditions, a lower risk of global warming, lower health care costs, an increase in life expectancy, etc. Also, for countries with fossil fuel deposits, can be anticipated dropping treasury income, factory closures, high unemployment, the likelihood of protests and uprisings.
Źródło:
Combustion Engines; 2020, 59, 4; 39--44
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostic and reliability model of an internal combustion engine
Autorzy:
Orczyk, Małgorzata
Tomaszewski, Franciszek
Powiązania:
https://bibliotekanauki.pl/articles/2097455.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diagnostics
internal combustion engine
diagnostic model
reliability model
diagnostyka
silnik o spalaniu wewnętrznym
model diagnostyczny
model niezawodności
Opis:
The article presents a diagnostic and reliability model of an internal combustion engine that allows to assess the reliability status of the engine’s systems for a two-state model of operation and maintenance: functional - failed. The proposed diagnostic model is a qualitative-quantitative probabilistic model combining the reliability states of the engine systems with the values of the vibroacoustic diagnostic signal parameters. The conducted diagnostic and reliability experiments and simulation tests showed that based on the developed diagnostic and reliability model, it is possible to determine the reliability states of the engine.
Źródło:
Combustion Engines; 2020, 59, 1; 41--46
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Possible applications of prechambers in hydrogen internal combustion engines
Autorzy:
Matla, Jędrzej
Powiązania:
https://bibliotekanauki.pl/articles/2202513.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
hydrogen combustion
hydrogen knock
prechamber
H2ICE
combustion engine
spalanie wodoru
stuk wodorowy
komora wstępna
silnik spalinowy
Opis:
In order to ensure better control of the combustion process in a internal combustion engine powered by hydrogen, it has been proposed to use a split combustion chamber solution. Following paper contains a description of a hydrogen combustion system that includes an analysis of possible technical solutions. The considerations take into account the issues of the dual nature of hydrogen knocking and the problem of burning a stratified charge of a hydrogen-air mixture in a cylinder.
Źródło:
Combustion Engines; 2022, 61, 4; 77--82
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Possibilities of supplying internal combustion engines by wood gas
Autorzy:
Piętak, A.
Duda, K.
Chraplewska, N.
Powiązania:
https://bibliotekanauki.pl/articles/247405.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
producer gas
wood gas
combustion
biomass gasification
environmental protection
Opis:
The article presents possibilities of implementation gas, came by wood biomass gasification, to run on internal combustion engines powered normally by Diesel fuel. Carbonization, gasification and burning effects were introduced. Main processes occurring during biomass gasification were shown. Basic chemical reactions characteristic to each stage were named. The differences in composition of received gas according to sort of biomass, gasification medium and type of generator were mentioned. In article were depicted way of modus operandi and structures of typical generators along with its advantages and disadvantages. gas properties obtained by this method and its main parameters were presented. The advantages and disadvantages posed by the use of wood gas in internal combustion engines were described. Parameters of the gas that should be amended to allow the engine to be powered were listed. Also were shown ways of changing these parameters. Necessary engine modifications to be able to supply it with wood gas were presented. The article finishes with conclusions and risks resulting from the use of this technology and also possible impact on the environment.
Źródło:
Journal of KONES; 2010, 17, 3; 369-376
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydrogen as fuel in operation of internal combustion engines
Autorzy:
Kruczyński, S.
Ślęzak, M.
Gis, W.
Powiązania:
https://bibliotekanauki.pl/articles/242013.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
exhaust emission
ecology
hydrogen
engines
vehicles
Opis:
Hydrogen internal combustion engines (HICE) are presently the subject of numerous R&D projects. For hydrogen fuelling mainly, spark-ignition engines are adapted but it is also possible to adjust self-ignition engines. Self-ignition engines may be fuelled only with dual-fuels and usually demonstrate an oversized level of compression ratio requiring reduction because of engine knocking, whereas spark-ignition engines – on the contrary feature an undersized level of compression ratio that needs to be increased to ensure an effective combustion process. Hydrogen may be used also for gasoline dual-fuel engines. Hydrogen utilization as diesel engine fuel should be considered depending on the type of diesel cycle: 1.The use of hydrogen alone or as an addition to gasoline or LPG and methane in spark-ignition engines; 2.The use of hydrogen as an addition to diesel oil in self-ignition engines. In the paper are presented the review of the literature on the use only of hydrogen as a fuel or only of the additionof hydrogen to hydrocarbon fuels in engines with spark ignition and diesel. Have been studied combustion process, generation of heat and power, and efficiency of the engine. Have been evaluated opportunities to reduce harmful emissions. Have been evaluated possibilities of using hydrogen as a fuel for both type of engines. In the paper are presented the review use hydrogen as a fuel for vehicles with fuel cells too.
Źródło:
Journal of KONES; 2016, 23, 4; 237-244
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Internal combustion engine diagnostics using statistically processed Wiebe function
Autorzy:
Famfulik, Jan
Richtar, Michal
Smiraus, Jakub
Muckova, Petra
Sarkan, Branislav
Dresler, Pavel
Powiązania:
https://bibliotekanauki.pl/articles/2038118.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
automotive engineering
engine diagnostics
Wiebe function
parameters estimation
statistics
technical condition
Opis:
The aim of the article is to present the concept of an indirect diagnostic method using the assessment of the variability of the amount of released heat (mass fraction burn) and the heat release rate. The Wiebe function for the assessment of variability has been used. The Wiebe function parameters from the course of the high-pressure indication in the cylinder of internal combustion engine using linear regression have been calculated. From a sufficiently large number of measured samples, the upper and lower limits of the Wiebe function parameters have been statistically determined. Lower and upper limits characterize variability of the heat release process not only in terms of quantity but also in terms of heat release rate. The assessment of variability is thus more complicated than using one integral indicator, typically the mean value of amount of the released heat. The procedure enabling a more accurate estimation of heat generation beginning has been shown. For the combustion process variability assessment of the engine, statistical test of relative frequencies has been used.
Źródło:
Eksploatacja i Niezawodność; 2021, 23, 3; 505-511
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected Issues of the Internal Combustion Engine Turbocharger Operation
Autorzy:
Lotko, Wincenty
Lechowski, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/102829.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
diesel engine
turbocharger
variable angle
turbine steering
wheel blades
electromechanical turbocharger positioner
boost pressure
silnik wysokoprężny
turbosprężarka
zmienny kąt
sterowanie turbiną
łopatki kół
elektromechaniczny ustawnik turbosprężarki
ciśnienie doładowania
Opis:
A combustion engine turbocharger works in most difficult conditions due to high temperatures of the fuels it is driven by, vibrations and high rotational speeds of its shaft up to 200 thousand rpm. In addition, under these conditions, there are difficulties with lubrication of the blade axes. Thus, the combustion engine turbocharger is exposed to the damages occurring during the engine operation process. The frequency of damages was determined on the basis of tests for a selected group of vehicles. The object of detailed author’s own research was the Audi 3.0 V6 TDI engine of the Audi A6 C6 car which cooperated with a Borg Warner turbocharger with a variable angle of turbine steering wheel blades. These positioners are also exposed to adverse conditions: mainly vibrations and high temperatures. They are subjected to frequent damages, which often affect the engine control parameters. An analysis of the positioner element damage as well as a group of testers to assess their technical condition was made. The evaluated testers were allowed only to determine the efficiency of the turbocharger, but without indicating its technical condition or its positioner separately. Consequently, the author’s own research methodology and the construction of a new tester for the electromechanical turbocharger adjuster was developed. The necessary tests for the vehicle mileage up to 350,000 km were carried out. The self-designed tester can also estimate the degree of electromechanical wear of the positioner in the engine supercharging system as well as the resistance of its movements resulting from the pollution of the VTG turbocharger mechanism with the turbine steering wheel positioner, with variable geometrical parameters.
Źródło:
Advances in Science and Technology. Research Journal; 2020, 14, 2; 223-232
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Advantages of using composite alloys for internal combustion engine pistons
Autorzy:
Kowalski, Mirosław
Jankowski, Antoni
Powiązania:
https://bibliotekanauki.pl/articles/1833668.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
combustion engine piston
silumins
composite materials
tłoki silników spalinowych
siluminy
materiały kompozytowe
Opis:
Combustion engine pistons are subject to variable mechanical and thermal loads, and to variable deformations. The article presents the possibilities of using novel composite alloys for the construction of pistons for combustion engines. The novel alloys make it possible to meet high demands, especially for highly load designs, which practically cannot be met by conventional alloys used so far. These high requirements relate to the weight of the pistons, high temperature strength, alloy crystalline structure, abrasive wear resistance, dimensional stability. The requirements for pistons have an impact on the durability of the engine's operation, the level of noise emissions; exhaust gas blow-by into the crankcase, the level of emitted toxic exhaust components, mainly hydrocarbons. The research covered metallography (chemical composition, microstructure), material strength, abrasive wear, and thermal expansion. Investigations of the alloy crystallization process during casting were carried out using the Differential Thermal Analysis (DTA) method. The castings were used for metallographic tests. The strength of the samples was tested at room temperature (20°C) and elevated temperature (up to 350°C) on a testing machine equipped with a special climatic chamber. In particular, the article presents Thermal Derivative Analysis curves and representative microstructures of conventional AlSi12 alloy and the novel composite alloy; dependence of the tensile strength versus temperature for the samples of the novel alloy with various nickel content 2% and 4 %; comparison of the tensile strength for conventional alloy and the novel alloy at ambient and 250°C temperature; comparison of abrasive wear of samples, made of novel aluminium alloy and different cast iron; course of the linear expansion coefficient versus temperature for the conventional AlSi12 alloy with incorrect heat treatment; course of the linear expansion coefficient versus temperature for one of tested silumin alloy which expansion coefficient during sample cooling is smaller than during sample heating; course of the linear expansion coefficient versus temperature for the novel composite silumin alloy, after correct heat treatment. The great benefits of using this novel alloy and the introduction of novel alloying elements (in-Situ) have been confirmed in engine research.
Źródło:
Archives of Transport; 2020, 55, 3; 85-94
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Static internal combustion engine operating states in vehicle driving tests
Autorzy:
Andrych-Zalewska, Monika
Chłopek, Zdzisław
Merkisz, Jerzy
Pielecha, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/133063.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
combustion engines
drive test
engine operating conditions
silniki spalinowe
test jezdny
warunki pracy silnika
Opis:
The article presents the compression-ignition engine test results of static operating states in driving tests: NEDC (New European Driving Cycle), RDE (Real Driving Emissions) and the Malta custom test cycle, developed at the Poznan University of Technology. The NEDC and Malta tests were carried out as drive cycle simulations on the engine test bench, the RDE test was carried out in the real driving conditions. The engine operating states are described by the physical quantities of speed and torque. For each of the tests, zero-dimensional characteristics of the values describing the engine operation states were determined, including: mean value and average standard deviation and coefficient of variation. Histograms of quantities describing the engine's operating states for considered tests and driving conditions were also determined. A large diversity of zero-dimensional characteristics of the quantities describing the engine's operating states for the considered driving tests and driving conditions was found.
Źródło:
Combustion Engines; 2019, 58, 2; 50-54
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alternative fuels and technologies for compression ignition internal combustion engines
Autorzy:
Bereczky, A.
Powiązania:
https://bibliotekanauki.pl/articles/241749.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
alternative fuels
air pollution
environmental protection
dual fuel technology
Opis:
The traditional use of fossil-based fuels is now widely considered unsustainable because of depleting their natural resources. Potential substitutes of fossil fuels are oils of renewable origin such as various vegetable and non-edible oils. The aim of using these oils or their methyl esters (biodiesel) is to establish and maintain a balance between agriculture, economy and environment protection. However, realizing the increasing demand of raw materials currently used can be achieved not only by increasing the production area but also by introducing new materials or technologies. The article presents and evaluates modern raw fuel components that are currently being investigated. Furthermore, the article deals with the dual fuel combustion technology in detail, with which the processed fuels are becoming available for use in Compression Ignition (CI) engines, where conventional blending is difficult or their use exclusively in diesel engines is economically unjustified. In case of dual fuel engine systems, the primary fuel, such as (wet)ethanol, methanol, LPG, H2 etc. is injected into the intake manifold of the engine and the premixed mixture simultaneously produced is ignited by the pilot diesel fuel as secondary fuel injected directly into the engine cylinder. This technology can significantly reduce exhaust emissions and can slightly increase engine efficiency. The achievements in this field and recently obtained results by the author and his research group are also presented. Exhaust emissions, performance and combustion characteristics were measured and analyzed with respect to several operating parameters as follows: premixed ratio (rp), pilot timing and engine load.
Źródło:
Journal of KONES; 2012, 19, 4; 43-51
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Environmental assessment of the production process of internal combustion engines
Autorzy:
Mrozik, M.
Danilecki, K.
Powiązania:
https://bibliotekanauki.pl/articles/134189.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
car
combustion engine
life cycle assessment (LCA)
LCA
eco-design
production
samochód
silnik spalinowy
ocena cyklu istnienia
projektowanie ekologiczne
produkcja
Opis:
The aim of this article is to demonstrate using the LCA methodology the environmental effects of material composition changes on Volkswagen Golf passenger cars over the past 30 years. The simplified LCA model of the engine presented in the work shows the energy consumption and total CO2 emissions based on the mass of materials. It was built to investigate general assumptions about material production and car recycling. The results of the research presented in the paper give an image of the modernity of a passenger car engine on the basis of consumption and the degree of recovery of materials used for its construction.
Źródło:
Combustion Engines; 2017, 56, 4; 117-120
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies