Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "installations" wg kryterium: Wszystkie pola


Tytuł:
Monitoring of electrical quantities in final circuits of electrical installations
Autorzy:
Jędrychowski, R.
Powiązania:
https://bibliotekanauki.pl/articles/97712.pdf
Data publikacji:
2015
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
PLC
intelligent building installations
measurements
Opis:
One of the ways to ensure safe predictable and efficient operation of electrical devices is to develop a system to supervise and control the electrical installation, where the devices are installed. A structure of such a supervisory control system for a building installation can be of diversified in order to meet expectations and needs of the building owner. Various measuring devices of various manufacturers can be used as a data source with programmable logic controllers (PLC’s) in that number. They make possible to develop flexible intelligent installations that fit operational characteristics of the building structure, where they are developed and devices that operate there. The paper presents a system to supervise operation of an electrical installation that has been implemented in practice. The system takes advantage of operational and IT characteristics of PLC's and presents a research task, which means that it can evolve along with adding new elements to it.
Źródło:
Computer Applications in Electrical Engineering; 2015, 13; 268-277
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electromagnetic compatibility of smart installations
Autorzy:
Typańska, D.
Machczyński, W.
Powiązania:
https://bibliotekanauki.pl/articles/376224.pdf
Data publikacji:
2015
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
electromagnetic compatibility
intelligent building
electromagnetic disturbances
KNX
smart installations
Opis:
The paper presents the problem of protection of smart houses against electromagnetic disturbances. The technology associated with intelligent buildings was explained in detail. Attention was drawn to possibility of using specific technologies installed in different places. Electromagnetic disturbances that may affect the operation of sensitive electronic of intelligent building were characterized. The spread way of these disturbances and their methods of reduction were described.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2015, 81; 95-100
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hybrydowe instalacje grzewcze
Hybrid heating installations
Autorzy:
Sobiech, M.
Powiązania:
https://bibliotekanauki.pl/articles/210838.pdf
Data publikacji:
2017
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
budownictwo
ogrzewanie budynków
energia odnawialna
instalacje hybrydowe
construction
buildings heating
renewable energy
hybrid installations
Opis:
W artykule zaprezentowano istotne uwarunkowania związane z wykorzystaniem energii odnawialnej w instalacjach do ogrzewania i przygotowania ciepłej wody użytkowej we współczesnych budynkach różnego przeznaczenia, jako hybrydowe instalacje grzewcze. Istotę sprawy stanowi kwestia innowacyjnego rozwiązania technicznego instalacji grzewczych w warunkach klimatu umiarkowanego, aby uzyskać efekt najniższych kosztów użytkowania budynku w sezonie jego ogrzewania i zapewnić zaspokojenie potrzeb użytkowników.
The article presents important considerations related to the use of renewable energy installations in modern buildings for various purposes. The essence of the matter is the question of an innovative technical solution for heating installations and preparation of hot water in moderate climate conditions, in order to obtain the effect of the lowest cost of the maintenance and operation of the building in the heating season.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2017, 66, 2; 67-77
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Low-voltage electrical installations
Autorzy:
Skibko, Zbigniew
Ziemianek, Stanisław
Powiązania:
https://bibliotekanauki.pl/books/2109446.pdf
Data publikacji:
2019
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Opis:
This script is dedicated primarily to students of an engineering degree, studying at the Faculty of Electrical Engineering of the Bialystok University of Technology, carrying out laboratory exercises under the Erasmus + program. The thematic scope of the script includes exercises related to the construction and operation of power installations and equipment, as well as exercises associated with the testing of the effects of current flow by electrical power equipment. Each of the exercises comprises a theoretical part, in which the information necessary to understand and solve the problem of the exercise, the description of the test stand, the research program and the needed information that should be included in the student report have been presented.
Dostawca treści:
Biblioteka Nauki
Książka
Tytuł:
Urządzenia i techniki grillowania
Installations and techniques of grilling
Autorzy:
Burzyńska, O.
Skibniewska, K.A.
Kubiak, M.S.
Powiązania:
https://bibliotekanauki.pl/articles/227621.pdf
Data publikacji:
2009
Wydawca:
Wyższa Szkoła Menedżerska w Warszawie
Tematy:
techniki grillowania
urządzenia
techniques of grilling
installations
Opis:
W artykule omówiono bezpośrednie i pośrednie metody grillowania, a także ogólny przebieg grillowania w każdej z tych metod. Dokonano także przeglądu urządzeń stosowanych do opiekania oraz opisano zmiany zachodzące w mięsie podczas tego rodzaju obróbki termicznej.
Direct and indirect methods of grilling, also the process course during the techniques is discussed. Also installations used for grilling and changes occurring in meat during this type of thermal treatment is described.
Źródło:
Postępy Techniki Przetwórstwa Spożywczego; 2009, 1; 107-110
0867-793X
2719-3691
Pojawia się w:
Postępy Techniki Przetwórstwa Spożywczego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Komputerowe systemy sterowania i zabezpieczeń w obiektach oraz instalacjach technicznych
Computerized control and protection systems in technical objects and installations
Autorzy:
Śmierzchalski, R.
Kolendo, P.
Powiązania:
https://bibliotekanauki.pl/articles/2069722.pdf
Data publikacji:
2011
Wydawca:
Uniwersytet Morski w Gdyni. Polskie Towarzystwo Bezpieczeństwa i Niezawodności
Tematy:
systemy sterowania
techniki komputerowe
układy bezpieczeństwa
instalacje przemysłowe
instalacje okrętowe
control systems
computer technology
safety systems
industrial installations
naval installations
Opis:
The article presents some safety-related problems of the computer control systems and overall automation. The development of automation and information technology in recent years has forced to develop a number of new technologies and solutions for advanced process control and other technical installations. It seeks for automation of complex technical installations, conceived as means of controlling all subsystems and devices automatically, without human intervention. However, if we consider the economic aspects, the maintenancefree concept is not justified. The partial automation of selected systems is also of interest. This work considers some general aspects of control system design with emphasis on safety aspects. As an example of the protection system, the installation of diesel engine oil lubrication is presented.
Źródło:
Journal of Polish Safety and Reliability Association; 2011, 2, 3; 27--34
2084-5316
Pojawia się w:
Journal of Polish Safety and Reliability Association
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Using a mixture of natural forage in growing of yearlings of carp under conditions of recirculation installations
Autorzy:
Stas, Maria
Powiązania:
https://bibliotekanauki.pl/articles/1188092.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
carp
recirculation installations
feeding of fish
natural feed
liver
Opis:
The basic fish-breeding and biotechnological and biological indicators of yearlings of scaly carp grown in recirculation installations using forage mixture of natural food objects were researched. It was established that the introduction of natural fodder for feeding carp in controlled conditions positively affect the growth of fish. Using histological studies it was determined that in terms of growing fish in closed water plants, feeding fish with natural feed ingredients have positive effect on the metabolism in the body of the fish.
Źródło:
World Scientific News; 2016, 56; 133-145
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Projektowanie inteligentnych instalacji elektrycznych z wykorzystaniem programu ETC
Intelligent electrical installations design with EIB tool software (ETS)
Autorzy:
Czapp, S.
Porzeziński, M.
Powiązania:
https://bibliotekanauki.pl/articles/268154.pdf
Data publikacji:
2007
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
instalacje elektryczne
automatyka
sterowanie
automatics
electrical installations
Opis:
Rozwoj systemow automatyki budynku i wiążące się z ich zastosowaniem zwiększenie funkcjonalności i komfortu eksploatacji budynku, a także zmniejszenie zużycia energii, skutkuje coraz większym zainteresowaniem inwestorów nowoczesnymi rozwiązaniami, a zwłaszcza systemami inteligentnymi. Jednym z systemów inteligentnych dedykowanych do budynków mieszkalnych oraz użyteczności publicznej jest system Europejskiej Magistrali Instalacyjnej KNX/EIB. Jest to system zdecentralizowany pozwalający, poprzez zmianę oprogramowania, na zmianę funkcji i parametrów urządzeń istniejących w danym budynku, bez konieczności przebudowy instalacji. Projektowanie instalacji i programowanie urządzeń odbywa się za pomocą specjalistycznego programu ETS (EIB Tool Software). W pracy zaprezentowano zasady projektowania inteligentnej instalacji elektrycznej z wykorzystaniem programu ETS. Przedstawiono przykładowy projekt wdrożonej instalacji elektrycznej.
Building systems which give comfort of living and energy consumption decreasing are often implemented now. One of that system is KNX/EIB system dedicated for house and public buildings. KNX/EIB system is a decentralised bus system and does not require a central controller. In case of changing of the instaled devices function in the building only software application modification is necessary. Design process of the electrical installations in KNX/EIB system is performed in ETS (EIB Tools Software). In the paper principles of the KNX/EIB system designing are described. Implemented project of the electrical installation is presented.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2007, 23; 19-22
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Naturally occurring radioactive material (NORM) assessment of oil and gas production installations in Nigeria
Występowanie naturalnych substancji promieniotwórczych (NORM) w instalacjach gazowych i naftowych w Nigerii
Autorzy:
Elegba, S.
Funtua, I.
Powiązania:
https://bibliotekanauki.pl/articles/340792.pdf
Data publikacji:
2004
Wydawca:
Główny Instytut Górnictwa
Tematy:
ochrona radiologiczna w Nigerii
instalacje naftowe
instalacje gazowe
radiological protection in Nigeria
oil installations
gas installations
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2004, 1; 117-118
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
How to improve safety on the offshore installations
Autorzy:
Mrozowska, A.
Mrozowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/116698.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
offshore installations
job safety analyses (JSA)
offshore
offshore industry
offshore vessels
safety at sea
offshore directive
offshore operations
Opis:
Reviving is noticeable in the field of oil and gas production located under the seabed. The off-shore projects are being implemented. Due to this, the risk of accidents at each stage of production should be considered continually. The offshore market, both oil and gas as well as renewable energy, is estimated to increase steadily in the coming years. Therefore, the operations on the production oil field must be suitably protected at every stage of performing work. The paper describes how important Job Safety Analyses are for proper operations. The main aim of the article is to indicate steps and the best way of performing JSA on board of the offshore installation to reduce the risk of emergency. The selected disasters and major accidents indicate that the conducted activity is exposed to the risk of hazards to the natural environment and to people at every stage of the reservoir exploitation. The authors use the analysis of available international reports, the experience gained while working on different types of the offshore vessels and installations as well as in the Polish offshore company.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 2; 291-296
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Waste Thermal Treatment Installations in Poland
Instalacje termicznego przekształcania odpadów w Polsce
Autorzy:
Kępys, Waldemar
Jaszczura, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/318411.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
termiczne przekształcanie odpadów
instalacje
spalanie
współspalanie odpadów
thermal waste conversion
installations
incineration
waste co-incineration
Opis:
Waste thermal treatment by incineration, co-incineration, gasification or pyrolysis aims at recovering the waste, mainly in the form of energy. In addition, it also serves to disposal of waste, in particular hazardous one, including medical and veterinary waste. Thermal treatment of waste should be carried out in specially adapted installations that meet the BAT requirements. The article discusses installations operating in Poland designed for thermal treatment of municipal solid waste, sewage sludge as well as hazardous waste, including medical and veterinary waste.
Termiczne przekształcenie odpadów poprzez spalanie, współspalanie, zgazowanie czy pirolizę ma na celu ich odzysk, głównie energii. Ponadto służy także unieszkodliwieniu odpadów, w szczególności odpadów niebezpiecznych, w tym odpadów medycznych i weterynaryjnych. Termiczne przekształcanie odpadów powinno być prowadzone w specjalnie do tego przystosowanych instalacjach, spełniających wymagania BAT. W artykule omówiono instalacje funkcjonujące w Polsce dedykowane do termicznego przekształcania odpadów komunalnych, osadów ściekowych, odpadów niebezpiecznych w tym medycznych i weterynaryjnych.
Źródło:
Inżynieria Mineralna; 2020, 1, 1; 47-50
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bezpieczeństwo użytkowania instalacji technicznych budynków
The safe use of building installations
Autorzy:
Sobiech, M.
Powiązania:
https://bibliotekanauki.pl/articles/209993.pdf
Data publikacji:
2017
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
budownictwo
instalacje ogrzewania i wentylacji
eksploatacja
konserwacja
serwis
użytkowanie
construction
heating and ventilation installations
exploitation
operating and maintenance
use
Opis:
W artykule opisano rozwiązania techniczne współczesnych instalacji stosowanych w budownictwie. Charakterystyka techniczna instalacji w budynkach odnosi się do różnych źródeł wytwarzania ciepła dla potrzeb ogrzewania budynku i przygotowania ciepłej wody użytkowej. W opisie technicznych rozwiązań instalacji przedstawiono również dostępne materiały, jak rury, armatura odcinająca, regulacyjna, zabezpieczająca i kontrolno-pomiarowa, a także pompy cyrkulacyjne. W nawiązaniu do stosowanych materiałów instalacyjnych zaprezentowano potencjalne zagrożenia w eksploatacji instalacji przy braku profesjonalnej obsługi i konserwacji podczas użytkowania budynku.
The article describes the issues of technical solutions to contemporary installations used in modern buildings. Technical characteristics of installation systems refer to various sources of heat for building heating and domestic hot water. Description of the technical installation solutions also presents available materials, such as pipes, shutoff valves, regulatory, safety, control and measurement, as well as circulation pumps. In reference to the applicable installation materials there are presented potential threats in operation of the system in the case of the absence of professional service and maintenance during building exploitation.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2017, 66, 2; 55-65
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Logistyka w procesie recyklingu okablowania samochodowych instalacji elektrycznych
Logistics in the recycling process of wiring automotive electrical installations
Autorzy:
Jankowski, K.
Wąsowicz, A.
Powiązania:
https://bibliotekanauki.pl/articles/315669.pdf
Data publikacji:
2018
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
recykling
instalacje elektryczne
logistyka zwrotna
elektronika samochodowa
recycling
electrical installations
reverse logistics
Opis:
W artykule omówione zostały zagadnienia dotyczące recyklingu odpadów pochodzących z okablowania instalacji elektrycznych oraz elementów elektrotechniki samochodowej. Procesy recyklingu rozpatrywane pod kątem logistyki należą do tzw. logistyki zwrotnej i są niezmiernie istotne ze względu na aspekty ochrony środowiska, ekonomiczne i prawne. Opisano zakres zadań związanych z zagospodarowaniem materiałów pochodzących z samochodów wycofanych z eksploatacji a szczególnie okablowania instalacji elektrycznych i elementów elektroniki samochodowej. Logistyka na tym etapie cyklu życia pojazdów jest obszarem najsłabiej zidentyfikowanym, dlatego jest to podstawą do podjęcia badań w tym obszarze działalności gospodarczej kraju.
The article deals with issues related to the recycling of waste from cabling of electrical installations and components of automotive electronics. The recycling processes examined at the logistic angle belong to the so-called “reverse logistics” and are immensely relevant to the environmental, economic and legal aspects. The range of tasks related to management of materials obtained from cars withdrawn out of service, particularly electrical wiring and electronics has been described. Logistics at this stage of the life cycle of cars is a field of least expertise, and this constitutes the basis for conducting research regarding this area of country’s economic activity.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2018, 19, 4; 43-47
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wymagania stawiane urządzeniom do detekcji zwarć łukowych w instalacjach niskiego napięcia
Requirements for arc fault detection devices in low-voltage electrical installations
Autorzy:
Czapp, Stanisław
Powiązania:
https://bibliotekanauki.pl/articles/267162.pdf
Data publikacji:
2019
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
AFDD
instalacje elektryczne
ochrona przeciwpożarowa
electrical installations
protection against fires
Opis:
W artykule zwrócono uwagę na zagrożenie pożarem pochodzące od iskrzenia/zwarcia łukowego w instalacji niskiego napięcia. Przedstawiono podstawowe wymagania normy PN-EN 62606 obejmującej swym zakresem urządzenia do detekcji zwarć łukowych (AFDD). Urządzenia te zaczynają pojawiać się w polskich instalacjach elektrycznych, a w niektórych krajach są już obowiązkowym wyposażeniem wybranych obwodów. Omówiono również charakterystyki działania tych urządzeń oraz zalecenia odnośnie do ich stosowania.
Low-voltage electrical installations are equipped with various types of protection devices: fuses, circuit-breakers, residual current devices and surge arresters. These devices, however, may be ineffective in case of some insulation faults, which introduce risk of fire, e.g. due to rodents activity, assembly and construction work, crushing or excessive bending of the wire. This paper presents the most important requirements of PN-EN 62606 standard, dedicated to arc fault detection devices (AFDD). These devices are beginning to appear in Polish low-voltage installations, but in some countries they are already mandatory equipment for selected circuits. The operation and recommendations for application of these devices in electrical installations are also discussed.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2019, 64; 3-12
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The concept of a prosumer electrical installation structure in a modern building
Autorzy:
Bielecki, S.
Powiązania:
https://bibliotekanauki.pl/articles/105664.pdf
Data publikacji:
2014
Wydawca:
Centrum Badań i Innowacji Pro-Akademia
Tematy:
smart electrical installations
power management
prosumer installations
BMS
intelligent electrical system
energy management
inteligentne instalacje elektryczne
zarządzanie energią
instalacje prosumenckie
Opis:
This article presents the concept of a smart electrical installation of a prosumer type, designed for modern buildings, especially for civic buildings. This installation can be considered as an element of smart power grids. The external institution plays a special role in the proposed structure in the form of an outsourced energy service provider.
Źródło:
Acta Innovations; 2014, 11; 30-36
2300-5599
Pojawia się w:
Acta Innovations
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Procedure based functional safety and information security management of industrial automation and control systems on example of the oil port installations
Autorzy:
Śliwiński, M.
Piesik, E.
Powiązania:
https://bibliotekanauki.pl/articles/2068879.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Morski w Gdyni. Polskie Towarzystwo Bezpieczeństwa i Niezawodności
Tematy:
functional safety
security
cyber HAZOP
industrial control systems
oil port installations
Opis:
The approach addresses selected technical and organization aspects of risk mitigation in the oil port installations with regard to functional safety and security requirements specified in standards IEC 61508, IEC 61511 and IEC 62443. The procedure for functional safety management includes the hazard identification, risk analysis and assessment, specification of overall safety requirements and definition of safety functions. Based on the risk evaluation results the safety integrity level (SIL) and security assurance level (SAL) will be determined for consecutive safety functions. The proposed approach will be composed of the following items: process and procedure based safety and security management, example of procedure based safety management including insurance, integrated safety and security assessment of industrial control system (ICS) of the oil port pipelines, tanks and critical infrastructure.
Źródło:
Journal of Polish Safety and Reliability Association; 2017, 8, 1; 129--138
2084-5316
Pojawia się w:
Journal of Polish Safety and Reliability Association
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Buildings 2020+. Constructions, materials and installations
Autorzy:
Krawczyk, Dorota Anna
Siuta-Olcha, Alicja
Plaza Garcia, Manuel
Data publikacji:
2019
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Opis:
This book was developed by a group of teachers and scientists from Bialystok University of Technology (Poland), the University of Cordoba (Spain) and Vilnius College of Technologies and Design (Lithuania) working within the VIPSKILLS project (Virtual and Intensive Course Developing Practical Skills of Future Engineers) Erasmus+ 2016-1-PL01-KA203-026152. The continual development of technologies, changing requirements in law regarding standard of new buildings’ constructions reshapes European cities. The book explores relations between architecture, environmental and civil engineering. Collaboration in a process of buildings’ design and construction is extremely important for further proper operation and thermal comfort of users, as well as achieving low energy consumption and good indoor air quality.
Dostawca treści:
Biblioteka Nauki
Książka
Tytuł:
PLC-based surveillance system for electrical installations in buildings
Autorzy:
Jędrychowski, R.
Powiązania:
https://bibliotekanauki.pl/articles/97664.pdf
Data publikacji:
2014
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
PLC
smart grid
electrical instalations
Opis:
The paper presents technological solutions for the operation management of electrical installations that are designed to include micro power sources. For that purpose, the technological potential offered by programmable logic controllers (PLC’s) has been applied to the building management system. The development of electricity generation technologies makes it possible for a private person and micro companies to install local power sources that are directly connected to their own power supply wiring. The paper presents characteristics and technological potential of surveillance and control systems designed for low power sources connected to low voltage network systems and electric wiring in buildings. Possibilities concerning the integration of the source operation control with the building automation system as well as the power consumption control have been presented.
Źródło:
Computer Applications in Electrical Engineering; 2014, 12; 196-205
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrical Installations in the Building – Designing
Autorzy:
Rusak, Helena
Nazarko, Joanna
Makal, Jarosław
Sulkowski, Marcin
Sinkevičius, Vytenis
Powiązania:
https://bibliotekanauki.pl/books/2204875.pdf
Data publikacji:
2023
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Opis:
This book has been written for foreign students designing lighting installations as part of the Electrical‐Equipment‐and‐Installations course. Since the projects of these installations require knowledge of Polish regulations and international standards, it is very helpful to describe them and provide appropriate sources/links. It can be as an introduction for the reader to electrical installations in the building designing. This book can also be used by everyone who want to deepen the knowledge of electrical terminology in English. The online availability of this book in the OER (Open Educational Resources) hopes that many students will benefit from it.
Dostawca treści:
Biblioteka Nauki
Książka
Tytuł:
Badanie zjawiska uderzenia hydraulicznego w pionowych instalacjach pompowych w warunkach laboratoryjnych
Investigation of water hammer phenomenon in vertical pumping installations under laboratory conditions
Autorzy:
Szymała, J.
Powiązania:
https://bibliotekanauki.pl/articles/340700.pdf
Data publikacji:
2008
Wydawca:
Główny Instytut Górnictwa
Tematy:
uderzenia hydrauliczne
pionowe instalacje pompowe
likwidacja zakładów górniczych
liquidation mine
vertical pumping installations
water hammer
Opis:
W artykule przedstawiono sposób oceny uderzeń hydraulicznych, występujących w pionowych instalacjach pompowych, na podstawie badań modelowych. W tym celu do zbudowania modelu instalacji wykorzystano kryterium podobieństwa dla cieczy lepkich oraz przeprowadzono badania. Dodatkowo zaproponowano zastosowanie amortyzatora powietrzno-cieczowego ograniczającego wzrost ciśnienia w rurociągu podczas występowania uderzenia hydraulicznego.
In the paper, a way of assessment on the basis of model investigations was presented of water hammer occurring in vertical pumping installations. In order to achieve this aim, a criterion of similarity for viscous liquids was used and tests were conducted for building the model of installation. Additionally, use of oleo-pneumatic shock absorber was proposed, restricting height of pressure in pipeline during occurrence of water hammer.
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2008, 2; 67-80
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Light technical installations for fish feeding
Autorzy:
Gazalov, V. S.
Powiązania:
https://bibliotekanauki.pl/articles/334124.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
ryby
dokarmianie
instalacja świetlna
light installation
fish
feeding
Opis:
Light technical installations with optimum color characteristics of optical radiation attract mosquitoes to the water surface of a pond where they are swarming. It results in increasing in the pond of the number of chironomids which are alive foods for fish. In the experimental pond compared with the control one mobility of fish in the twilight and at night in the area of electro-optical converters activity fish actively eats the attracted insects. It is getting into significant improvement of epiozootechnical situation in the ponds.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2011, 56, 1; 48-49
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Process of Judging Significant Modifications for Different Transportation Systems compared to the Approach for Nuclear Installations
Autorzy:
Petrek, N.
Berg, H. P.
Powiązania:
https://bibliotekanauki.pl/articles/116039.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Nuclear Installations
Green Culture in Shipping
Transportation Systems
Maritime Transportation
EU Regulations
Common Safety Method (CSM)
Safety Management System (SMS)
risk management
Opis:
The implementation of the CSM regulation by the European Commission in 2009 which harmonizes the risk assessment process and introduces a rather new concept of judging changes within the European railway industry. This circumstance has risen the question how other technology sectors handle the aspect of modifications and alterations. The paper discusses the approaches for judging the significance of modifications within the three transport sectors of European railways, aviation and maritime transportation and the procedure which is used in the area of nuclear safety. We will outline the similarities and differences between these four methods and discuss the underlying reasons. Finally, we will take into account the role of the European legislator and the fundamental idea of a harmonization of the different approaches.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2015, 9, 4; 511-520
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ochrona przeciwpożarowa i przeciwporażeniowa instalacji fotowoltaicznych
Fire and electric shock protection of photovoltaic installations
Autorzy:
Barasiński, A.
Czaja, P.
Polak, D.
Powiązania:
https://bibliotekanauki.pl/articles/952170.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Humanistyczno-Przyrodniczy im. Jana Długosza w Częstochowie. Wydawnictwo Uczelniane
Tematy:
instalacja fotowoltaiczna
prąd elektryczny
straż pożarna
porażenie
pożar
bezpieczeństwo pożarowe
photovoltaic installations electric current
State Fire Service
electric shock
fire
fire safety
Opis:
Prąd elektryczny jest głównym nośnikiem energii we współczesnych czasach. Każde gospodarstwo domowe, zakład pracy, a nawet pojazd mechaniczny, w mniejszym lub większym stopniu wykorzystuje energię elektryczną. Różne gałęzi gospodarki przemysłowej, transport oraz gospodarstwa domowe do normalnego funkcjonowania wymagają zasilania w energię elektryczną poprzez sieci lub instalacje elektroenergetyczne. Stale rosnąca liczba urządzeń wymagających zasilania elektrycznego wpływa na potrzebę rozbudowy oraz dostosowywania infrastruktury do wymogów ich właściwego zasilania pod względem technicznym oraz bezpieczeństwa eksploatacji. Nadmierna eksploatacja zasobów naturalnych wpływa na ich szybkie kurczenie, wzrost kosztów pozyskiwania oraz kosztów końcowej produkcji energii elektrycznej. Wprowadzone w Polsce regulacje prawne w zakresie pozyskiwania i zbywania energii, wyprodukowanej w prosumenckich mikro instalacjach, wpłynęły na dynamiczny rozwój sektora „zielonej” energetyki. Polska zobowiązana jest do 2020 r. zwiększyć procentowy udział energii wyprodukowanej ze źródeł odnawialnych w ogólnym bilansie energetycznym do poziomu 15%. Technologia fotowoltaiczna (PV) staje się coraz częściej wykorzystywana w mikro instalacjach (≤10kW), montowanych na dachach domów jednorodzinnych lub w postaci zestawów modułów wolnostojących na prywatnych posesjach. Instalacje tego typu w większości eksploatowane są przez osoby nie mające odpowiedniej wiedzy i przygotowania praktycznego, dotyczącego bezpieczeństwa obsługi urządzeń i instalacji elektrycznych. Wystąpienie pożaru lub innego zagrożenia w obrębie obiektu z zabudowaną instalacją fotowoltaiczną, wymaga podjęcia przez służby odpowiednich kroków umożliwiających bezpieczne przeprowadzenie akcji ratowniczej lub gaśniczej. W zakresie typowych urządzeń i instalacji zasilanych z sieci dystrybucyjnej w energię elektryczną, wymagania techniczne oraz procedury odłączenia zasilania elektrycznego są jasno określone w przepisach. W przypadku instalacji fotowoltaicznych, ze względu na ich specyfikę pracy, brak jest możliwości jednoznacznego wyeliminowania zagrożenia wynikającego z obecności elementów pod napięciem w trakcie trwania akcji ratowniczo-gaśniczej. W artykule przeprowadzono analizę sposobu działania systemu fotowoltaicznego, ze szczególnym uwzględnieniem zagrożeń porażeniowych prądem elektrycznym dla strażaków biorących udział w akcji ratowniczo-gaśniczej w obrębie czynnej instalacji fotowoltaicznej.
The electric current is the main energy carrier in today’s world. Each household, work place and vehicles use it more or less. Different branches of industrial economy, transport and household need electric power from mains or electric power installations to work correctly. The number of devices, which need electric power, is growing all the time. It impacts on the necessity of expansion and adjustment the infrastructure to have the correct power in terms of technical and safe operation. An excessive exploitation of natural resources affects on theirs quick shorten, the growth of acquisition costs and also the growth of final electric power costs. Legal regulations, which were brought in Poland in regard to acquire and dispose energy produced in micro installations, has impacted on the dynamic development of green energy area. Poland till 2020 is obliged to increase the number of energy produced via renewable sources to 15% of the whole energy. Photovoltaics technology (PV) is becoming more and more used in micro installations (≤10kW) which are installed on detached houses’ roofs or free-standing modules which are situated on private properties. These types of installations are mainly utilized by people, who do not have enough knowledge and practical preparation of using electric devices and installations in safety way. The occurence of fire or other danger within facility with photovoltaics installation requires taking the right action by rescue services which enable safe rescue and firefighting action. When it comes to get off the power supply from typical devices and installations supplied by electricity, technical requirements and procedures are clarified in regulations. In the case of photovoltaics installations there is no clear possibility to eliminate the threat because of theirs specificity during the rescue and firefighting action. In this article, the analysis of photovoltaics system’s mode of action has been conducted with due regard to electrocution threats among firefighters taking part in rescue and firefighting action within active photovoltaics installation.
Źródło:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Technika, Informatyka, Inżynieria Bezpieczeństwa; 2018, T. 6; 295-305
2300-5343
Pojawia się w:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Technika, Informatyka, Inżynieria Bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Procedure based proactive functional safety management for the risk mitigation of hazardous events in the oil port installations including insurance aspects
Autorzy:
Kosmowski, K. T.
Śliwiński, M.
Piesik, E.
Gołębiewski, D.
Powiązania:
https://bibliotekanauki.pl/articles/2069078.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Morski w Gdyni. Polskie Towarzystwo Bezpieczeństwa i Niezawodności
Tematy:
functional safety
security
industrial control systems
oil port installations
risk evaluation
insurance
Opis:
This article addresses selected technical and organization aspects of risk mitigation in the oil port installations with regard to functional safety requirements specified in standards IEC 61508 and IEC 61511. The procedure for functional safety management includes the hazard identification, risk analysis and assessment, specification of overall safety requirements and definition of safety functions. Based on risk assessment results the safety integrity level (SIL) is determined for consecutive safety functions. These functions are implemented within industrial control system (ICS) that consists of the basic process control system (BPCS) and/or safety instrumented system (SIS). Determination of required SIL related to required risk mitigation is based on semi-quantitative evaluation method. Verification of SIL for considered architectures of BPCS and/or SIS is supported by probabilistic models with appropriate data and model parameters including security-related aspects. The approach proposed is illustrated on example of oil port installations. In final part of the article the insurance aspects are discussed in managing risks, as some risks are to be transferred to an insurance company.
Źródło:
Journal of Polish Safety and Reliability Association; 2016, 7, 1; 147--156
2084-5316
Pojawia się w:
Journal of Polish Safety and Reliability Association
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ćwiczenia laboratoryjne z instalacji budowlanych. Część 2
LABORATORY EXERCISES FROM CONSTRUCTION INSTALLATIONS. PART 2
Autorzy:
Rubnikowicz, Adam
Szczechowiak, Edward
Powiązania:
https://bibliotekanauki.pl/books/27698400.pdf
Data publikacji:
2022
Wydawca:
Politechnika Łódzka. Wydawnictwo Politechniki Łódzkiej
Opis:
Niniejszy skrypt powstał jako materiał pomocniczy do zajęć laboratoryjnych z wentylacji prowadzonych w pracowniach Instytutu Inżynierii Środowiska i Instalacji Budowlanych Politechniki Łódzkiej i jest uzupełnieniem wiedzy przekazywanej na wykładach, ćwiczeniach i podczas projektowania. Książka jest kontynuacją zagadnień omawianych w części pierwszej skryptu pod tym samym tytułem. Część druga skryptu zawiera opis siedmiu ćwiczeń laboratoryjnych o tematyce związanej z pomiarami i projektowaniem różnych rodzajów instalacji ogrzewczych oraz badaniu zmian właściwości powietrza wentylacyjnego poddawanego procesom uzdatniania podczas przepływu przez centralę klimatyzacyjną. Prezentowany materiał pomoże efektywnie i bezpieczne przeprowadzić ćwiczenia laboratoryjne, wykonać sprawozdania z badań oraz pozwoli zrozumieć zachodzące procesy i zjawiska w aspekcie praktycznym. Skrypt zawiera również opisy elementarnych metod, aparatury i przyrządów pomiarowych oraz wskazówki pomocne przy prowadzeniu samodzielnych badań laboratoryjnych.Został on przygotowany w szczególności z myślą o studentach kierunku inżynieria środowiska na Wydziale Budownictwa, Architektury i Inżynierii Środowiska Politechniki Łódzkiej jako materiał dydaktyczny przedmiotu wentylacja.
This script has been prepared as supplementary material for Ventilation laboratory classes conducted in the laboratories of the Institute of Environmental Engineering and Building Installations, Technical University of Lodz and complements the knowledge conveyed in lectures, classes and during design. The book is a continuation of the issues discussed in the first part of the script under the same title. The second part contains seven laboratory exercises related with the measurement and design of various types of heating systems and the study of changes in the properties of the ventilation air subjected to treatment processes during the flow through the air-conditioning unit. The presented material will help to carry out the laboratory exercises effectively and safely, to make reports from research and will allow to understand the occurring processes and phenomena in practical aspect. The script also contains descriptions of elementary methods, apparatus and measuring instruments as well as guidelines helpful in conducting independent laboratory experiments. The script has been prepared especially for the students of Environmental Engineering at the Faculty of Construction, Architecture and Environmental Engineering of the Technical University of Lodz as didactic material for the subject of Ventilation
Dostawca treści:
Biblioteka Nauki
Książka
Tytuł:
Vykhrova truba na gazorozpodilnykh stantsiiakh
Vortex tube at the gas-distributive installations
Autorzy:
Savchenko, O.
Balinskyi, I.
Yurkevych, Y.
Powiązania:
https://bibliotekanauki.pl/articles/78124.pdf
Data publikacji:
2011
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2011, 13 C
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model mikroprocesorowego urządzenia do kontroli szczelności instalacji gazowych z wykorzystaniem czujnika półprzewodnikowego
Model of a microprocessor device for monitoring the sealing of gas installations with the use of a semiconductor sensor
Autorzy:
Grychowski, T.
Dziendziel, A.
Powiązania:
https://bibliotekanauki.pl/articles/186779.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technik Innowacyjnych EMAG
Tematy:
instalacja gazowa
szczelność
czujniki półprzewodnikowe
gas installations
semiconductor sensors
sealing
Opis:
W publikacji zaprezentowano wyniki prac nad konstrukcją modelu mikroprocesorowego, przenośnego urządzenia do kontroli szczelności instalacji gazowych. W urządzeniu zastosowano tani, półprzewodnikowy czujnik gazów palnych oraz mikrokontroler sterujący urządzeniem. Urządzenie posiada możliwość kalibracji, programowania poziomów alarmowych oraz odczytu wskazań. Przeprowadzono badania urządzenia w celu weryfikacji poprawności jego działania oraz oceny niepewności pomiarów.
The article features the results of works on developing a model of a microprocessor, portable device for monitoring the sealing of gas installations. The device was equipped with a cheap semiconductor sensor of combustible gases and a microcontroller responsible for the control of the device. It is possible to calibrate the device and program alarm levels and measurements readout. The tests of the device were conducted in order to verify its operating adequacy and assess measurement errors.
Źródło:
Mechanizacja i Automatyzacja Górnictwa; 2012, R. 50, nr 1, 1; 38-41
0208-7448
Pojawia się w:
Mechanizacja i Automatyzacja Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Termowizyjny monitoring instalacji elektrycznych i rurociągowych w podziemiach kopalń
Infrared monitoring of electric installations and pipelines in mine undergrounds
Autorzy:
Polnik, B.
Powiązania:
https://bibliotekanauki.pl/articles/198863.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniki Górniczej KOMAG
Tematy:
górnictwo
wyrobiska pionowe i poziome
instalacje elektryczne i rurociągowe
monitoring termowizyjny
mining industry
horizontal and vertical workings
electric installations and pipelines
infrared monitoring
Opis:
Stosowanie techniki termowizyjnej, dzięki bezinwazyjności pomiarowej, jest coraz częstsze w podziemiach kopalń. Tradycyjne rewizje okresowe nie zawsze dają możliwość wykrycia nawet niewielkich uszkodzeń rurociągów, czy też przegrzewania się złącz przewodów elektrycznych. To, co jest niewidoczne gołym okiem, doskonale widać przy użyciu kamery termowizyjnej. W artykule omówiono badania monitorujące stan techniczny instalacji elektrycznych i rurociągowych z zastosowaniem techniki termowizyjnej przeprowadzone w kopalni. Przedstawiono doświadczenia wynikające z zastosowanej metody. Wskazano na możliwości dalszego rozszerzenia zakresu stosowania techniki termowizyjnej.
Infrared technology due to non-invasive measurements is more frequently used in mine undergrounds. Traditional periodical inspections not always can detect small damages to pipelines or overheating of electric wires. What cannot be seen with a naked eye can be visible with use of infrared camera. Tests of the system for monitoring the technical condition electric installations and pipelines with use infrared technology carried out in mine underground are discussed. Conclusions and results from using this technology are presented. Possibility of extension of scope of using this technology is indicated.
Źródło:
Maszyny Górnicze; 2016, 34, 4; 84-92
0209-3693
2450-9442
Pojawia się w:
Maszyny Górnicze
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kontrola stanu instalacji elektrycznych niskiego napięcia- przegląd aktualnych wymagań w zakresie prób i pomiarów
Verification of low voltage electrical installations - review of the up-to-date requirements for the testing
Autorzy:
Czapp, S.
Powiązania:
https://bibliotekanauki.pl/articles/266554.pdf
Data publikacji:
2010
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
instalacje elektryczne
ochrona przeciwporażeniowa
sprawdzanie
electrical installations
protection against electric shock
verification
Opis:
W pracy omówiono zasady wykonywania prób i pomiarów w instalacjach elektrycznych niskiego napięcia. Szcze-gólną uwagę zwrócono na zmiany wymagań w tym zakresie wpro-wadzone przez nowe wydanie normy PN-HD 60364-6:2008 Insta-lacje elektryczne niskiego napięcia – Część 6: Sprawdzanie.
In the paper principles of the verification in low voltage electrical installations are presented. Special attention is given to the requirements of the new edition of the standard PN-HD 60364-6:2008 Low voltage electrical installations – Part 6: Verification.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2010, 27; 105-114
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie procedur oceny zgodności do optymalizacji konstrukcji urządzeń w inteligentnych instalacjach elektrycznych
Conformity evaluation for devices employed in electrical installations of intelligent buildings
Autorzy:
Olesz, M.
Mamczur, W.
Powiązania:
https://bibliotekanauki.pl/articles/266813.pdf
Data publikacji:
2011
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
dyrektywa EMC
zapady napięcia i przerwy w zasilaniu
układy sterowania
intelligent building
conformity evaluation
electrical devices
electrical installations
Opis:
W referacie przedstawiono wybrane zalecenia normalizacyjne związane z wymaganiami dyrektywy kompaty-bilności elektromagnetycznej (EMC) [1] dla urządzeń automaty-ki zawierających wyposażenie elektroniczne. Wprowadzanie powyższych wyrobów do obrotu na rynku europejskim wymaga przeprowadzenia oceny zgodności produktu z wymaganiami odpowiednich dyrektyw: niskonapięciowej, kompatybilności elektromagnetycznej, a w przypadku sterowania bezprzewodo-wego również radiotelekomunikacyjnej. Wykonanie badań zalecanych przez odpowiednie, zazwyczaj zharmonizowane z dyrektywami Unii Europejskiej (UE) normy wyrobu [2] i powo-ływanie się na nie w deklaracji zgodności przez producenta pomaga użytkownikowi dostosować charakterystyki urządzenia i instalacji tak, aby zapewnić spełnienie wymagań odporności w środowisku zakłóceń. W pracy pokazano także procedurę po-prawiania odporności łącznika elektronicznego na zaniki napię-cia zasilającego.
The paper shows selected recommendations of standardization associated with the requirements of EMC (electromagnetic compatibility) directive [1] for automatic electrical controls. Launching these devices on the EU market requires an assessment of product compliance with the requirements of relevant directives: Low Voltage, EMC, and in case of wireless controls Radio & Telecommunications Terminal Equipment. Conducting the tests recommended by the respective product standards, which are generally aligned with the EU directives, and referring to it in the declaration of conformity helps the producer to optimize the characteristics of the equipment and installation to ensure that the requirements for immunity are met. The paper also shows procedure of improving the immunity of electronic switch to voltage short interruptions.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2011, 29; 41-44
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Safety in the use of car gas fuel installations
Autorzy:
Chojnowski, Janusz
Powiązania:
https://bibliotekanauki.pl/articles/2097646.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
safety
gas
fuel
LPG
CNG
bezpieczeństwo
gaz
paliwo
Opis:
The safe use of gas fuel installations in vehicles is guaranteed by legal and technical aspects. These topics are included in this study. The regulations ensuring safety in the operation of the mentioned fuel systems serve as a solution for potentially hazardous situations. The components of propane-butane and CNG fueling systems are designed, manufactured and tested to maximize their safety of use. The regulations [6-8] define the guidelines for the arrangement and assembly method of the system components, and additionally, the assembly service itself may be performed only by an authorized workshop with granted permissions. Installations using gaseous fuels are safer than conventional fuels in the event of a collision or fire, as long as the user of the installation does not gross negligence in operation and maintenance. The article also discusses the context of the restriction in access to the car infrastructure for cars powered by gaseous fuels.
Źródło:
Combustion Engines; 2022, 61, 2; 3--9
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heat transfer processes in installations with photovoltaic roof tiles
Autorzy:
Kurz, D.
Powiązania:
https://bibliotekanauki.pl/articles/97640.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
photovoltaic roof tile
convection
radiation
conduction
heat transfer
Opis:
The paper presents the classification of methods of heat transfer, and the procedure when determining criterion equations depending on the type of heat exchange. It describes the heat transfer coefficients and resistance of heat transfer by convection. It also indicates the workflow to determine the quantitative heat flow in the present system of photovoltaic roof tiles installed in the roof structure.
Źródło:
Computer Applications in Electrical Engineering; 2016, 14; 444-456
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Programowanie współczesnych instalacji budynkowych urzeczywistnieniem potrzeb człowieka zaspokajanych przez budynki inteligentne
Programming contemporary building installations as the realization of human needs satisfied by intelligent buildings
Autorzy:
Horyński, Marek B.
Powiązania:
https://bibliotekanauki.pl/articles/1857324.pdf
Data publikacji:
2020
Wydawca:
Wydawnictwo Druk-Art
Tematy:
inteligentny budynek
standard budynku
zautomatyzowane instalacje elektryczne
integracja systemów
intelligent building
building standard
automated electrical installations
system integration
Opis:
O wysokości standardu budynku decyduje obecność zautomatyzowanych instalacji elektrycznych. BIM jest podstawą integracji realizacji inwestycji. Zapewnienie ekonomicznego użytkowania i utrzymania budynku wymaga wszechstronnego podejścia do procesu jego projektowania i realizacji. Istotną rolę we współczesnym budownictwie odgrywają integratorzy systemów, którzy dzięki szerokiej wiedzy koordynują i korelują wymianę informacji między branżami. Szczególnej uwagi kwestie te wymagają w takich sytuacjach, jak zagrożenie epidemiologiczne.
Thanks to the possibility of changing the configuration of individual devices, the functions of the BMS system can be adapted to the current needs of the user. Technological progress and increasing customer requirements mobilize the activities of representatives of almost every field of science and technology, including the building automation sector. Critical periods for humanity, such as the state of epidemiological emergency, are a particular challenge. This market is full of hitherto unknown ideas, concepts, as well as devices, components and apparatus, which are entering more and more computerized methods that repeatedly replace physical human activity. Undoubtedly, the issue of intelligent buildings will find wide application in the future for many generations to make life easier for people all over the world.
Źródło:
Napędy i Sterowanie; 2020, 22, 12; 68-73
1507-7764
Pojawia się w:
Napędy i Sterowanie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energetyczno-ekonomiczna analiza porównawcza systemów mycia instalacji udojowych
Energetic and economic comparison of the washing systems for machine milking installations
Autorzy:
Szulc, R.
Powiązania:
https://bibliotekanauki.pl/articles/239688.pdf
Data publikacji:
2008
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
dojarnia
mycie
chów bydła
analiza kosztów
niekonwencjonalne źródło energii
nakłady energetyczne
dairy cattle
milking parlour
washing
milking installations
costs
unconventional energy source
energy inputs
Opis:
Badano nakłady energetyczno-ekonomiczne dwóch systemów mycia instalacji udojowej: "gorąca woda" oraz tradycyjny system cyrkulacyjny. Analiza nakładów wykazała, że w przypadku systemu "gorąca woda" energochłonność wynosi 5,04 MJ/1 stanowisko (1,04 kWh/stanowisko), a szacunkowy koszt 9,25 zł/1 mycie, w porównaniu z 1,73 MJ/stanowisko (0,48 kWh/stanowisko), a koszt 1,28 zł/1 mycie w tradycyjnym systemie mycia.
The costs and energy inputs were investigated and compared for two washing systems of machine milking installations: the "hot water" system and a traditional circulation system. Input analysis showed that in case of "hot water" system the energy consumption amounted 5.04 MJ (1.04 kWh) per stand and estimated cost 9.25 PLN per one washing, as compared with 1.73 MJ (0.48 kWh) per stand and 1.28 PLN per one washing at traditional washing system.
Źródło:
Problemy Inżynierii Rolniczej; 2008, R. 16, nr 1, 1; 143-150
1231-0093
Pojawia się w:
Problemy Inżynierii Rolniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hybrydowe instalacje grzewcze wykorzystujące ciepło słoneczne – praktyczny kompromis
Hybrid heating installations using solar heat – a practical compromise
Autorzy:
Starościk, Janusz
Powiązania:
https://bibliotekanauki.pl/articles/2069823.pdf
Data publikacji:
2022
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
hybrydowe instalacje grzewcze
ciepło z energii słonecznej
bezpieczeństwo energetyczne
dywersyfikacja
lokalne zasoby energii
hybrid heating installations
solar thermal energy
safety of energy supply
diversification
local energy resources
Opis:
Obecne działania mające na celu dekarbonizację energetyki i ogrzewnictwa oraz ograniczenie wykorzystania paliw kopalnych zmuszają do poszukiwania rozwiązań, które realnie pozwolą na stopniowe dochodzenie do tego celu bez narażenia użytkowników końcowych na niebezpieczeństwo wynikające z utraty pokrycia zapotrzebowania na ciepło. Zwiększanie udziału odnawialnych źródeł energii w ogrzewaniu jest uzasadnionym działaniem, jednak należy pamiętać, że ich zastosowanie wymaga podwyższania efektywności energetycznej budynków, głównie poprzez ograniczenie ich zapotrzebowania na ciepło. W praktyce jest to trudne do wykonania w krótkim czasie z uwagi na skrajną niejednorodność w konstrukcjach budynków oraz inne czynniki, takie jak preferencje i zasoby finansowe użytkowników końcowych, parametry lokalnych systemów energetycznych i specyfika konstrukcji samych budynków. Dlatego szuka się rozwiązań, które z jednej strony pozwolą na stopniowe zmniejszenie udziału paliw kopalnych i energii elektrycznej ze źródeł konwencjonalnych w ogrzewaniu wraz z postępem realizowanej termomodernizacji, a z drugiej zapewnią odbiorcom bezpieczeństwo energetyczne. Takie rozwiązanie powinno również docelowo prowadzić do ograniczenia kosztów zakupu nośników energii przez zwiększanie udziału dostępnych lokalnie zasobów energii. Warunki te spełniają hybrydowe instalacje grzewcze – składające się z różnych uzupełniających się nawzajem źródeł ciepła połączonych w jeden układ, który automatycznie dostosowuje się do warunków podaży dostępnych lokalnie zasobów. Dobrym tego przykładem jest kombinacja kolektorów słonecznych z magazynem ciepła i dodatkowym źródłem ciepła, odgrywającym rolę źródła szczytowego, dzięki czemu istnieje możliwość zwiększania udziału czystego bezemisyjnego ciepła pochodzącego z kolektorów słonecznych i zagwarantowania stałego komfortu cieplnego odbiorcom.
Current activities aimed at decarbonization the energy and heating supply and reduction of the use of fossil fuels, force us to look for solutions that will realistically allow for a gradual achievement of this goal, without risking the security of covering the heat demand of end users. Increase the share of renewable energy sources in heating is a justified measure, but it should be remembered that their use requires increase the energy efficiency of buildings, mainly by reducing their heat demand. In practice, this is a difficult task to accomplish in a short time due to the extreme heterogeneity in building structures and other various factors such as end-user preferences and their financial resources, available local energy systems and the resources of buildings themselves. Therefore, solutions are sought that will, on the one hand, allow for a gradual reduction in the share of fossil fuels and electricity from conventional sources in heating along with the progress of thermal modernization, and on the other hand, will ensure energy security for consumers. Such a solution should also ultimately lead to the reduction of the purchase costs of energy carriers by increasing the share of locally available energy resources. Hybrid heating installations are such solution. Currently, hybrid heating installations are installations consisting of various complementary heat sources combined into one system that automatically adjusts to the supply conditions of locally available resources. A good example of such an installation is a combination of solar collectors with a heat storage and a supplementary additional heat source, acting as a peak source, thanks to which we have the opportunity to increase the share of clean, emission-free heat from solar collectors and guarantee constant thermal comfort to recipients.
Źródło:
Energetyka Rozproszona; 2022, 7; 85--97
2720-0973
Pojawia się w:
Energetyka Rozproszona
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Threats occurring in the functioning of shelter ventilation installations
Autorzy:
Wasilczuk, Jarosław
Powiązania:
https://bibliotekanauki.pl/articles/132000.pdf
Data publikacji:
2019
Wydawca:
Centrum Rzeczoznawstwa Budowlanego Sp. z o.o.
Tematy:
energy-efficient buildings
climate
multi-family shelter
ventilation systems
Opis:
Ventilation of facilities such as shelters is a very complex issue. First of all, such an object should be extremely tight so that intentional air pollution outside does not pose a threat to people inside. Secondly, the system must be characterized by high reliability, because for airtight objects the failure of the air conditioning system is also a threat to people inside. Thirdly, the system must provide microlimatic vacancies inside acceptable by people passing through the shelter - it is mainly about temperature and humidity.
Źródło:
Modern Engineering; 2019, 2; 55-60
2450-5501
Pojawia się w:
Modern Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The application of programmable relays in domestic electrical installations
Autorzy:
Piątek, M.
Powiązania:
https://bibliotekanauki.pl/articles/134829.pdf
Data publikacji:
2017
Wydawca:
ADVSEO
Tematy:
automation
electrical power
control
automatic switching
programmable relay
PLC
Opis:
The paper presents the possibilities of using automatic switching, as a system for providing uninterrupted power supply in buildings located in the area of frequent interruptions in the power supply or equipped with renewable energy sources. Apart from the idea of the installation the paper presents an example of the program to control various functions of the system and software for visualization by tracking the availability of some power sources, to simulate their readiness for operation. The main focus is on simplicity and intuition in the use of programs that are available to the average user and can be used and modified from home, eg. a notebook or phone. For the analysis we used a fictitious electrical wiring design of a residential building, which is connected to renewable energy sources. Having selected the appropriate equipment and security, we divided the installation into sections of receiving power in terms of the validity of the power, which includes the automatic control.
Źródło:
Technical Issues; 2017, 2; 3-7
2392-3954
Pojawia się w:
Technical Issues
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przez zabawę ku źródłom dźwięków — przyczynek do badań instalacji dźwiękowych w twórczości Lidii Zielińskiej
Through Play to Sound Sources — A Contribution to Research of Lidia Zielińska’s Sound Installations
Autorzy:
Dziewanowska-Pachowska, Marta
Powiązania:
https://bibliotekanauki.pl/articles/2179092.pdf
Data publikacji:
2023-03-21
Wydawca:
Związek Kompozytorów Polskich
Tematy:
Lidia Zielińska
instalacje dźwiękowe
twórczość dla dzieci
ekologia akustyczna
sound installations
works for children
acoustic ecology
Opis:
Instalacje dźwiękowe są obecne w muzyce polskiej od lat 60. XX wieku, kiedy to swoje pierwsze kompozycje przestrzenno‑muzyczne zaprezentował Zygmunt Krauze. Choć innowacyjne działania Krauzego dość długo nie znajdowały naśladowców w polskim środowisku muzycznym, to już w latach 80. zainteresowanie kompozytorów formami multimedialnymi, angażującymi odbiorców do aktywnego uczestnictwa, znacznie wzrosło. Wśród twórców, którzy dostrzegli muzyczny potencjał nowej formy sztuki znalazła się Lidia Zielińska — chętnie eksplorująca możliwości sonorystyczne zarówno instrumentów tradycyjnych, jak i elektroakustycznych. W kontekście kształtowania jej indywidualnego języka kompozytorskiego ważną rolę odegrało także poznanie idei głoszonych przez Raymonda Murraya Schafera, spotkania z kanadyjskim kompozytorem oraz upowszechnianie jego myśli w polskim środowisku. Ważnym nurtem jej twórczej aktywności są także działania skierowane do dzieci. Wszystkie wymienione aspekty widoczne są w jej instalacjach, które — zgodnie z założeniami Łukasza Guzka, badacza sztuki XX i XXI wieku — nierozerwalnie łączą w sobie zagadnienia przestrzeni i obecności. Pod względem brzmieniowym projekty te stanowią spójną całość z pozainstalacyjną twórczością Zielińskiej, będąc przestrzenią eksplorowania zagadnień związanych z istotą i źródłami dźwięku, a także ekologią akustyczną. W artykule zostają dokładniej opisane następujące instalacje dźwiękowe Lidii Zielińskiej, z uwzględnieniem ich założeń kompozytorskich i sposobu realizacji elementów charakteryzujących formy instalacyjne: „Muzyka potencjalna [nr 1]”. „Spiskowa teoria dźwięku” (1988), „Projekt dla końca korytarza” (1994), „Alles gab’s schon mal” / „Wszystko już było” (2006), „Lutosławski DIY” (2013), „Plasterki muzyki” (2013), „Looks Chinese, Sounds Polish” (2013) oraz „Polish Sonorities” (2014).
Sound installations have been present in Polish music since the 1960s when the first “spatial-musical compositions” were presented by Zygmunt Krauze. His innovative activities hadn’t found followers in the Polish musical community for quite a while, but in the 1980s composers started to be more and more interested in multimedia forms engaging recipients into an active participation. Among these artists was Lidia Zielińska—a composer willingly exploring the sonoristic possibilities of both traditional instruments and electroacoustic ones. A big importance into the formation of her individual composition language was getting familiar with Raymond Murray Schafer’s ideas, meetings with this Canadian composer and promoting his thought into the Polish community. An important current of her creative activities were also the actions focused on children. All these mentioned aspects can be seen in her installations that—according to the assumptions of Łukasz Guzek, a researcher of 20th and 21st-century art—inextricably combine the questions of space and presence. In terms of sound, these projects and not-installation Zielińska’s creations merge into a coherent whole: a space to explore problems related to sound’s essence and sources, as well as acoustic ecology. This article describes in more detail the following sound installations of Lidia Zielińska, including their composition assumptions and way of realizing the elements characterising the installation forms: “Muzyka potencjalna [nr 1]”. “Spiskowa teoria dźwięku” (1988), “Projekt dla końca korytarza” (1994), “Alles gab’s schon mal” / “Wszystko już było” (2006), “Lutosławski DIY” (2013), “Plasterki muzyki” (2013), “Looks Chinese, Sounds Polish” (2013) and “Polish Sonorities” (2014).
Źródło:
Polski Rocznik Muzykologiczny; 2022, 20; 114-131
1733-9871
2719-7891
Pojawia się w:
Polski Rocznik Muzykologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Instalacje termicznego przekształcania odpadów - doświadczenia z rozruchów
Autorzy:
Fornalczyk, Agata
Radecki, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/89565.pdf
Data publikacji:
2018
Wydawca:
Nowa Energia
Tematy:
odpady
termiczne przekształcanie odpadów
instalacje
waste
thermal waste treatment
installations
Opis:
TERMALL Sp. z o.o. Rozruch Moc Ekologia z siedzibą w Bełchatowie powstała w 1991 roku. Posiada ugruntowaną pozycję na rynku usług dla energetyki i ochrony środowiska. Specjalnością Firmy stało się zarządzanie projektami inwestycyjnymi i modernizacyjnymi, przeprowadzanie kompleksowych rozruchów obiektów, wykonywanie pomiarów (w tym pomiarów gwarancyjnych) i optymalizacja, prowadzenie eksploatacji oraz szkolenie załóg. Doświadczenia TERMALL w zakresie realizacji instalacji termicznego przekształcania odpadów łączą się z takimi zakładami jak ZUSOK Warszawa, SITA Tees Valley (Wlk. Brytania), ZTUOK Konin, ZUOK Białystok, ZTUO Szczecin. Biorąc pod uwagę, iż działających, będących w realizacji i planowanych instalacji tego typu w Polsce jest kilkanaście, TERMALL posiada znaczący udział w zakresie ich uruchamiania.
Źródło:
Nowa Energia; 2018, 1; 16-17
1899-0886
Pojawia się w:
Nowa Energia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Monitorowanie pracy wybranych obwodów instalacji elektrycznych
Operation monitoring for selected circuits of electrical installations
Autorzy:
Jędrychowski, R.
Kusyk, S.
Powiązania:
https://bibliotekanauki.pl/articles/377516.pdf
Data publikacji:
2015
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
instalacje elektryczne
pomiary
PLC
Opis:
Jednym z elementów pozwalających na bezpieczną, przewidywalną i efektywną pracę instalacji jest stworzenie systemu kontrolującego i sterującego pracą instalacji elektrycznej. System sterowania może mieć różnorodną strukturę odpowiadającą oczekiwaniom i potrzebą właściciela budynku. Jako źródło danych wykorzystane mogą zostać urządzenia dostarczane przez różnych producentów, w tym sterowniki PLC. Pozwala to na budowanie elastycznych instalacji inteligentnych dostosowanych do obiektu, w którym są budowane oraz pracujących w nim odbiorników. W artykule przedstawiony zostanie zrealizowany w praktyce system monitorowania pracy instalacji elektrycznej wykorzystujący właściwości eksploatacyjne i informatyczne sterowników PLC.
One of the elements that can ensure safe, predictable and efficient performance of an electrical installation is a supervisory control system. Such a system can be of diversified architecture in order to meet needs and expectations of the building owner. The data source can be based on devices supplied by various manufacturers, including programmable logic controllers (PLC's). Such an approach makes possible to develop flexible intelligent installations that are compatible with the object, where they are installed and its loads. The paper presents an operation monitoring system for an electrical installation that has been already realized in practice. Its functionality is based on operational and information management properties of PLC’s.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2015, 82; 135-142
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of residual current devices in electrical installations with frequency converters
Stosowanie wyłączników różnicowoprądowych w instalacjach elektrycznych z przemiennikami częstotliwości
Autorzy:
Czapp, S.
Powiązania:
https://bibliotekanauki.pl/articles/952773.pdf
Data publikacji:
2005
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Opis:
Residual current devices are applied to ensure protection against indirect contact using automatic disconnection of supply in law voltage systems. In electrical installations with frequency converters various frequency and also direct earth fault current can occur. Most of residual current devices cannot operate if direct earth current flows thus protection against electric shock is not effective. Only few residual current devices operate in these circumstances. In circuits with frequency converters transient and steady stale leakage current can occur as well. This influences residual current devices selection. If residual current devices are improperly selected and installed, their unwanted tripping occurs even if there is no risk of electric shock. This paper presentes the principles governing residual current devices selection to the circuits with frequency converters and their installation.
Wyłączniki różnicowoprądowe z reguły są stosowane jako urządzenie wyłączające dla spełnienia warunku samoczynnego wyłączenia zasilania przy zwarciu doziemnym w układach niskiego napięcia. W instalacjach elektrycznych, w których znajdują się przemienniki częstotliwości mogą pojawić się prądy zwarcia doziemnego o różnej częstotliwości lub stałe. Większość wyłączników różnicowoprądowych nie reaguje na tego typu prądy, co powoduje, że ochrona przeciwporażeniowa jest nie skuteczna. W obwodach z przemiennikami częstotliwość mogą pojawiać się przejściowe i ustalone prądy upływowe o znacznych wartościach. Prądy te znacząco wpływają na dobór wyłączników różnicowoprądowych. Jeżeli wyłączniki różnicowoprądowe są niepoprawnie dobrane mogą powodować zbędne zadziałania przy braku zagrożenia porażeniowego. Referat przedstawia zasady doboru i instalowania wyłączników różnicowoprądowych do obwodów z przemiennikami częstotliwości.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2005, 21; 51-56
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Shaping a city and its defenses; fortifications of Hellenistic Berenike Trogodytika
Autorzy:
Woźniak, Marek
Powiązania:
https://bibliotekanauki.pl/articles/1683098.pdf
Data publikacji:
2018-07-09
Wydawca:
Uniwersytet Warszawski. Wydawnictwa Uniwersytetu Warszawskiego
Tematy:
Hellenistic/Ptolemaic fortifications
Berenike
harbor
Red Sea
water installations
Opis:
Key information on the location, size and dating of the Ptolemaic fortifications of Berenike Trogodytika comes from archaeological excavations carried out in 2013–2015, following the 2012 season when the presence of military architecture in the Red Sea harbor was first discovered and identified (Woźniak and Rądkowska 2014). Sections of a thick wall constructed of gypsum anhydrite blocks on a wide foundation were recorded in the northern part of the site (trenches BE-13/90 and BE13-93). The wall was part of the defenses protecting the harbor from the north, the only land access to the site through marshy ground on the fringes of the so-called “northern lagoon”. Further work in trenches BE14-97 in 2014 and BE15-104 in 2015 uncovered the remains of a well preserved early Hellenistic fortified city gate, built of gypsum anhydrite blocks and chunks of coral. The complex has no parallel at present anywhere in the Red Sea region. A series of shallow basins interconnected by pipes made of truncated necks of early Hellenistic amphorae, found to the east of the gate, served probably to collect rainwater. The water function? of the gate was confirmed further by a large basin or cistern, about 1 m deep, abutting the complex on the southwest. A subterranean network of four rock-cut chambers(?) was discovered at the bottom of the internal gate chamber. A corridor in the east wall of the gate shaft, with a covered channel in the floor, led off to the northeast, in the direction of a rectangular anomaly observed on the magnetic map, which could be another rock-cut shaft.
Źródło:
Polish Archaeology in the Mediterranean; 2017, 26(2); 43-60
1234-5415
Pojawia się w:
Polish Archaeology in the Mediterranean
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane zagadnienia ochrony infrastruktury krytycznej na przykładzie portu morskiego
Selected Issues Concerning Protection of Key Installations Illustrated on the Example of a Maritime Port
Autorzy:
Życzkowski, M.
Szustakowski, M.
Dulski, R.
Kastek, M.
Ciurapiński, W.
Karol, M.
Markowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/973265.pdf
Data publikacji:
2014
Wydawca:
Centrum Naukowo-Badawcze Ochrony Przeciwpożarowej im. Józefa Tuliszkowskiego
Tematy:
zintegrowane systemy ochrony
infrastruktura krytyczna
system integrujący
integrated security systems
key installations
integrating system
Opis:
Cel: Celem artykułu jest przybliżenie zagadnień ochrony obiektów infrastruktury krytycznej. Szczególną uwagę zwrócono na zagadnienia ochrony zewnętrznej i monitorowanie obszar chronionego na przykładzie zabezpieczeń portu morskiego. Na jego terenie można wyróżnić strefy wymagające różnego podejścia do aspektu ochrony, dając w ten sposób pełny obraz systemu ochrony infrastruktury krytycznej obiektów specjalnych. Wprowadzenie: Obecne zdobycze techniki w zakresie systemów ochrony obiektów infrastruktury krytycznej oferują mnogość rozwiązań z zakresu funkcjonalności i możliwości. Tworząc system bezpieczeństwa obiektu, należy przede wszystkim na poziomie działania procedur bezpieczeństwa zapewnić ich wzajemną komplementarność względem poszczególnych podmiotów je realizujących. W ujęciu systemu ochrony obiektów infrastruktury krytycznej podmiotami realizującymi procedury systemu bezpieczeństwa są zarówno techniczne środki ochrony, jak i służby ochrony. Wymaga to odpowiedniego zarządzania pracą poszczególnych elementów systemu z uwzględnieniem ich możliwości i kompetencji. Ponadto projektowany system ochrony powinien być spójny nie tylko pod względem procedur, lecz również z uwzględnieniem technicznego aspektu działania poszczególnych podsystemów ochrony. W tym celu należy zapewnić integrację poszczególnych podsystemów w centrum nadzoru, które odpowiada za prawidłowy przepływ informacji pomiędzy podmiotami obecnymi w systemie bezpieczeństwa i koordynuje ich pracę. Wyniki: W artykule zostały przedstawione kluczowe zagadnienia ochrony technicznej obiektów infrastruktury krytycznej w ujęciu ochrony zewnętrznej i wewnętrznej. Autorzy zarysowali podstawowe problemy wykorzystania perymetrycznych czujników specjalnych oraz dalekozasięgowych systemów wizualizacji zdarzeń wspomagających działania służb ochrony fizycznej. Przedstawiono również problematykę systemów integrujących umożliwiających, adekwatną do potrzeb, obsługę systemów ochrony w zakresie BMS w powiązaniu z czujnikami ochrony zewnętrznej. Wnioski: Na podstawie przeprowadzonej analizy można stwierdzić, iż głównym kryterium doboru elementów systemów ochrony infrastruktury krytycznej jest budżet. Widać wyraźne trendy w wyborze przez inwestorów systemów opartych głównie o detekcję wizualną. Systemy takie, mimo iż oferują wiele funkcjonalności, nie są idealnym rozwiązaniem ze względu na zmienne warunki oświetleniowe. Dodatkowo dają złudne przeświadczenie o ograniczaniu kosztów poprawnie funkcjonującego systemu ochrony. Dlatego kluczowe jest odpowiednie dopasowanie systemu ochrony do potrzeb i wymagań danego obiektu.
Aim: The purpose of this article is to expose protection issues of key installations. Specifically, as an illustration, attention is focused on questions concerning the security of a maritime port. Within such a perimeter it is possible to identify a range of zones which require diverse protection measures. In turn, this provides a full image of security measures which need to be harnessed to protect key installations. Introduction: Current technological advances in the field of security systems for key installations afford a multitude of functional and capability solutions. Creation of a security system requires, at the operational level, a need to ensure compatibility in procedures for those engaged in the realization of protection. Security systems for key installations require the engagement of technical measures as well as the services of security organizations. This requires a suitable management approach to individual elements of the system to maximize capability and competence. Additionally, a proposed security system should be consistent not only in terms of procedures, but also with regard to the technical interaction of each subsystem. To achieve this it is necessary to integrate various subsystems at the control center, which is responsible for co-ordination and proper flow of information between those involved in the security activity. Results: The paper exposed main technical issues relating to key installation security systems, in context of internal and external security. Authors revealed fundamental problems associated with the use of special perimeter sensors as well as long range visual aids which support the work of security staff. Problems were also highlighted about issues concerning integration of systems which should satisfy requirements of operating BMS security systems in relation to external security sensors. Conclusions: An analysis reveals that the main criterion for selection of system elements used in the protection of key installations is the budget. Clear trends indicate that, in the main, investors chose systems based on visual detection. Such systems, although offering many features, are not ideal for variable lighting conditions. Additionally, they provide a false conviction of reducing the cost of a properly functioning security system. Therefore, it is vital to adopt a security system which satisfies the needs and requirements of given key installation.
Źródło:
Bezpieczeństwo i Technika Pożarnicza; 2014, 3; 15-24
1895-8443
Pojawia się w:
Bezpieczeństwo i Technika Pożarnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza możliwości stosowania systemów faliście giętkich przewodów ze stali nierdzewnej w instalacjach gazowych w budynkach w Polsce
Analysis of the possibilities of using stainless steel flexible hose systems in gas installations in Poland
Autorzy:
Minor, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/1834232.pdf
Data publikacji:
2020
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
przewody faliste
instalacje gazowe
przewody faliście giętkie
stal nierdzewna
flexible pipe
gas installations
flexible stainless
steel pipes
Opis:
Currently in Poland, the most important legal act specifying the requirements and materials that can be used for the construction of gas installations in buildings is the Regulation of the Minister of Infrastructure on the technical conditions to be met by buildings and their location (Journal of Laws 2015 item 1422 as amended). It permits the use of seamless steel or welded steel carrier pipes, and threaded connections or copper pipes joined by brazing. Due to the fact that the Polish Standard PN-EN 1775:2009 (PN-EN 1775:2009) allows the use of corrugated stainless steel hoses as well as other materials, including plastics or stainless steel systems joined by crimping, as well as emerging inquiries of manufacturers of corrugated stainless steel hoses concerning the possibility of their use in Poland, an analysis of the possibility of using corrugated stainless steel hoses for gas installations in Poland was conducted. The article presents the provisions in force in Poland and in selected EU countries regulating the possibility of using corrugated stainless steel hoses in gas installations in buildings. Research was carried out to examine the most important, form the author’s point of view, characteristics of corrugated stainless steel hose systems, taking into account those properties that may have the greatest impact on their safety. The research was carried out on three selected systems available on the EU market. The properties tested were tightness, bending capacity, internal pressure strength, impact resistance, dent resistance, tensile strength, fire tightness. The tests were carried out based on the methodology described in the Polish Standard PN-EN 15266:2009. All tests gave positive results. Finally, the feasibility of using corrugated stainless steel hose systems in gas installations in buildings was assessed, and additional requirements to be met by these systems were proposed.
Źródło:
Nafta-Gaz; 2020, 76, 3; 176-185
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modular heat storage in waste heat recovery installations
Autorzy:
Górszczak, Piotr
Rywotycki, Marcin
Hojny, Marcin
Filo, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/27312237.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
heat storage
heat recovery
waste heat
CFD
Opis:
The paper presents the methodology of designing a system for accumulating waste heat from industrial processes. The research aimed to analyse the fluid’s movement in the heat accumulator to unify the temperature field in the volume of water constituting the heat buffer. Using the computer program Ansys Fluent, a series of computational fluid dynamics simulations of the process of charging the heat storage with water at 60◦C, 70◦C, and 80◦C was carried out. The selected temperatures correspond to the temperature range of unmanaged waste heat. In the presented solution, heat storage is loaded with water from the cooling systems of industrial equipment to store excess heat and use it at a later time. The results of numerical calculations were used to analyse the velocity and temperature fields in the selected structure of the modular heat storage. A novelty in the presented solution is the use of smaller modular heat storage units that allow any configuration of the heat storage system. This solution makes it possible to create heat storage with the required heat capacity.
Źródło:
Archives of Thermodynamics; 2023, 44, 3; 301--323
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
LAN interconnections applied to transmit data between remote control devices in power industry installations
Autorzy:
Jędrychowski, R.
Wydra, M.
Powiązania:
https://bibliotekanauki.pl/articles/97584.pdf
Data publikacji:
2013
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
LAN
IEC 61850
remote control
Opis:
The paper discusses technological solutions that are used to organize communication between technical devices within the electrical substation area. Design and operation of presently used supervision and control systems are based on various communication solutions. Ever growing standards concerning the required quantity of data and their transmission rate induce a search for new solutions. The paper presents new concepts of LAN-based data exchange and an equipment that can be applied to develop SCADA systems using that technology. An example physical model of communication has been used to present a configuration of devices that form a frame of the network and remote control elements that use it.
Źródło:
Computer Applications in Electrical Engineering; 2013, 11; 293-303
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Primenenie effekta ranka v teplogenerirujushh ustanovkakh malojj moshhnost
Apply an effect ranke in heat-generating installations of small capacity
Autorzy:
Toporen, S.
Zaitsev, O.
Powiązania:
https://bibliotekanauki.pl/articles/78231.pdf
Data publikacji:
2011
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2011, 13 C
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A design concept of fire protection system for an ecological floating dock
Autorzy:
Dymarski, C.
Śledź, D.
Powiązania:
https://bibliotekanauki.pl/articles/260325.pdf
Data publikacji:
2005
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
floating dock
electric installations
fire protection systems
Opis:
This paper presents possible fire risks to an ecological floating dock and a design concept of its fire prevention system. The design concept covers: the water main fire system, froth- smothering system for fire prevention of the main deck area and CO2 – fire extinguishing system for fire prevention of engine room, workshop and cable duct of the dock.
Źródło:
Polish Maritime Research; 2005, S 1; 70-76
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ składników wstępnie uzdatnionego biogazu na elementy sieci i instalacji gazowych
Influence of pre-treated biogas components on the elements of gas networks and installations
Autorzy:
Wróblewska, Anna
Powiązania:
https://bibliotekanauki.pl/articles/31344034.pdf
Data publikacji:
2022
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
biogaz
sieć gazowa
instalacje gazowe
biogas
gas network
gas installations
Opis:
Głównym celem niniejszego artykułu jest przedstawienie wpływu składników wstępnie uzdatnionego biogazu na elementy sieci i instalacji gazowych, takie jak np. rury, złączki, armatura, reduktory, oraz na materiały uszczelniające stosowane w połączeniach mechanicznych. W pracy dokonano przeglądu elementów, z których mogą być budowane sieci gazowe, jak i tych występujących w instalacjach gazowych, a następnie zebrano informacje o materiałach, z których wykonywane są elementy liniowe, różnego typu złączki, jak również materiały stosowane do uszczelnienia, w celu określenia zakresu, w jakim należy przeprowadzić ocenę oddziaływania składników biogazu. Biorąc pod uwagę składy biogazu dostępne w literaturze oraz średni skład wstępnie oczyszczonego biogazu rolniczego, dokonano analizy doniesień literaturowych w zakresie możliwych oddziaływań poszczególnych składników na elementy sieci i instalacji gazowych. Przeanalizowano dostępne artykuły naukowe, a także informacje zebrane od producentów poszczególnych elementów, co wykazało, że trudno jest udzielić jednoznacznej odpowiedzi, które składniki biogazu rolniczego i w jakich stężeniach mogą stanowić zagrożenie dla bezpieczeństwa transportu nowego paliwa gazowego. Związane jest to z tym, że prowadzone dotychczas badania i analizy w dużej mierze koncentrowały się jedynie na pojedynczych składnikach lub ewentualnie na mieszaninach jednak o znacznie mniej złożonych składach, niż ma biogaz, stąd też trudno jest ocenić współoddziaływanie jego składników. W pracy określono główne składniki biogazu, które mogą niekorzystnie wpływać na elementy sieci i instalacji gazowych, zwrócono uwagę na ich możliwe wzajemne oddziaływania, a także na fakt, że część prowadzonych badań nie uwzględnia rzeczywistych warunków użytkowania, np. ciśnienia. We wnioskach wskazano również, że aby uzyskać jednoznaczną odpowiedź na pytanie o bezpieczeństwo transportu biogazu lub jego mieszanin, niezbędne jest przeprowadzenie dodatkowych badań.
The main aim of this article is to present the influence of pre-treated biogas components on elements of gas networks and installations, such as pipes, fittings, hardware, reducers and sealing materials used in mechanical connections. The work presents a review of both the elements that can be used to build gas networks and those found in gas installations, then collected information about the materials from which the linear elements are made, various types of couplings as well as the materials used for sealing, in order to determine the scope in which to assess the impact of biogas components. Taking into account the biogas compositions available in the literature and the average composition of pre-treated agricultural biogas, an analysis of literature reports was carried out on the possible impacts of individual components on the elements of gas networks and installations. The available scientific articles and information collected from the producers of individual elements were analyzed, which showed that it is difficult to give an unambiguous answer as to which ingredients of agricultural biogas and in what concentrations may pose a threat to the safety of the transport of the new gas fuel. This is due to the fact that the research and analyzes conducted so far have to a large extent focused only on single components or possibly on mixtures but with much less complex compositions than the composition of biogas, hence it is difficult to assess their interaction. The paper specifies the main components of biogas that may adversely affect the elements of gas networks and installations, emphasizes their possible interactions, as well as the fact that some of the research carried out does not take into account the actual conditions of use, e.g. pressure. It was also indicated in the conclusions that in order to obtain an unambiguous answer to the question about the safety of the transport of biogas or its mixtures, it is necessary to conduct additional tests.
Źródło:
Nafta-Gaz; 2022, 78, 11; 815-826
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling of long-term cable lines load in real operating conditions
Autorzy:
Wesołowski, M.
Niedbała, R.
Kucharski, D.
Hauser, J.
Powiązania:
https://bibliotekanauki.pl/articles/97431.pdf
Data publikacji:
2012
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
cable lines
circuit
electric installations
Opis:
In the article some basic aspects of numerical modeling of cable lines were discussed. Some often found cases, where the cable lines are placed in cable conduits and cable culverts, were analyzed. The analysis results were compared to the classical, circuit-models based approach of such issues. Basic sources of classical models errors, resulting from difficulty to precisely determine the real environmental quantities were calculated and discussed. Utility of numerical, field models was shown and influence of basic simplifications on calculating results was determined.
Źródło:
Computer Applications in Electrical Engineering; 2012, 10; 205-217
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Uwarunkowania rozwoju biogazowni rolniczych
Development conditions for agricultural biogas installations
Autorzy:
Romaniuk, W.
Karbowy, A.
Powiązania:
https://bibliotekanauki.pl/articles/238779.pdf
Data publikacji:
2008
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
biogaz
ochrona środowiska
energia
biogas
agricultural installation
energy
environment protection
Opis:
Budowa instalacji biogazowych przetwarzających odpady rolnicze jest ważna ze względu na możliwość redukcji odpadów oraz emisji gazów i odorów na terenach wiejskich. Rolnictwo intensywne stwarza liczne zagrożenia dla środowiska. Należą do nich erozja i wyjałowienie gleb, skażenie wód gruntowych i powierzchniowych związkami biogennymi i pestycydami, zmniejszenie bioróżnorodności oraz naruszenie równowagi ekologicznej ekosystemów. Nieprawidłowe przechowywanie gnojowicy, które jest powszechne w warunkach polskich, jak i niewłaściwe jej wykorzystanie rolnicze przyczynią się do skażenia wód powierzchniowych i gruntowych związkami azotu i fosforu oraz organizmami chorobotwórczymi.
Rational management of agricultural wastes based on their proper removal from the livestock buildings, storage and afterwards utilization are of particular importance for natural environment protection. Inappropriate storage and management of liquid and solid manure are the main reason of ground waters contamination. Very often the piles of dung are situated on permeable bedrock soil, from where the drained liquid penetrates into ground waters or to nearest water-courses. Presented analysis may be useful at designing and construction of the liquid manure tanks or dung pits according to the standard requirements, and it is expected to enable the proper exploitation of these facilities as well. Special attention was paid to the methods of manure treatment by methane and aerobic fermentation.
Źródło:
Problemy Inżynierii Rolniczej; 2008, R. 16, nr 3, 3; 105-112
1231-0093
Pojawia się w:
Problemy Inżynierii Rolniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sterowanie i wizualizacja w instalacjach budynku inteligentnego
Control and visualization in intelligent building installations
Autorzy:
Nowak, R.
Pietrasz, A.
Trzmiel, G.
Powiązania:
https://bibliotekanauki.pl/articles/376667.pdf
Data publikacji:
2018
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
budynek inteligentny
sterowanie
wizualizacja
Opis:
W pracy odniesiono się do przedstawienia projektu systemu sterowania komfortem i bezpieczeństwem w budynku oraz wizualizacji systemów współpracujących w ramach tego układu. We wstępie przedstawiono definicję budynku inteligentnego oraz opis sterowników PLC i oprogramowania typu SCADA. W dalszej części zaprezentowane zostały założenia projektowe wraz z opisem działania zaprojektowanego układu. Opisane zostały również opracowane algorytmy sterowania procesami, program sterownika, a także stworzona wizualizacja. Praca zwieńczona została podsumowaniem.
The paper presents of the project of comfort and security management in a building and its visualization. In the introduction, the definition of intelligent building, PLC controllers and SCADA software were briefly portrayed. The following is a presentation of the design intent and operations description. The control algorithms, program for the selected controller and SCADA visualization were also described. The last part of the paper contains the summary.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2018, 96; 185-196
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Administracyjnoprawne aspekty ograniczania emisji zanieczyszczeń do powietrza pochodzących z eksploatacji instalacji spalania paliw stałych w budynkach mieszkalnych
Administrative and legal aspects of reducing of air pollutant emissions stemming from exploitation of solid fuel combustion installations in residential buildings
Autorzy:
Zacharczuk, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/1046977.pdf
Data publikacji:
2017-03-31
Wydawca:
Katolicki Uniwersytet Lubelski Jana Pawła II
Tematy:
ochrona powietrza
emisja
zanieczyszczenia
instalacje
spalanie paliw
budynki mieszkalne
air protection
emission
pollutions
installations
fuel combustion
residential buildings
Opis:
Podstawowym obecnie problemem w zakresie jakości powietrza w Polsce są przekroczenia dopuszczalnych poziomów pyłu zawieszonego PM10 i PM2,5 oraz przekroczenia poziomu docelowego benzo(a)pirenu wynikające przede wszystkim z emisji zanieczyszczeń do powietrza pochodzących z eksploatacji instalacji spalania paliw stałych w budynkach mieszkalnych. W prawie unijnym główne kierunki działań związanych z ochroną powietrza sprowadzają się do kształtowania systemu ochrony jakości powietrza, standardów jakości produktów oraz standardów emisyjnych. Działania związane z ochroną powietrza na poziomie unijnym regulowane są znaczną ilością zróżnicowanych unijnych aktów normatywnych takich jak rozporządzenia, dyrektywy oraz rozporządzenia wykonawcze. Aktualnie na gruncie prawa polskiego możliwość ograniczenia emisji zanieczyszczeń do powietrza pochodzących z eksploatacji instalacji spalania paliw stałych w budynkach mieszkalnych wynika z art. 96 ustawy Prawo ochrony środowiska. Na podstawie tego przepisu istnieje możliwość przyjęcia przez sejmik województwa tzw. „uchwały antysmogowej”, w ramach której mogą być określone ograniczenia lub zakazy w zakresie eksploatacji instalacji, w których następuje spalanie paliw. Na gruncie obecnie obowiązującego prawodawstwa polskiego zauważalny jest brak obowiązujących powszechnie na całym terytorium Polski przepisów określających ograniczenia emisji tych zanieczyszczeń. Dlatego też niezbędne są zmiany normatywne w tym zakresie. Sporządzone już projekty zmian normatywnych w prawie krajowym zmierzają niewątpliwie w dobrym kierunku. Niemniej jednak działania te są przede wszystkim niewątpliwie sporo spóźnione oraz wydają się niewystarczające. Zmiany muszą mieć charakter dalej idący niż jest to aktualnie proponowane w ramach sporządzonych już projektów aktów normatywnych.
The basic problem regarding air quality in Poland are currently exceedances of permissible limits of particulates matter PM10 and PM2.5 and exceedances of final limit of benzo(a)pyrene deriving primarily from air pollutant emissions stemming from exploitation of solid fuel combustion installations in residential buildings. Main directions of activities aiming at air protection within European Union law come down to forming of air quality protection scheme, products quality standards and emissions standards. Activities related with air protection at the European Union level are regulated by significant amount of differential European Union normative acts such as regulations, directives, implementation regulations. Currently, at the level of Polish law, the possibility of reducing of air pollutant emissions stemming from exploitation of solid fuel combustion installations in residential buildings follows from Article 96 of Environmental protection law. A voivodeship sejmik (regional assembly) may pass, on the grounds of the above regulation, so called ‘anti-smog resolution’, in the content of which it is possible to define restrictions and bans regarding exploitation of installations where fuels are burned. Considering currently binding Polish legislation, it may be noticed that there is a lack of generally applicable on the whole Polish territory regulations defining these pollutant emissions limits. Therefore, normative amendments in this range are necessary. Elaborated already normative amendments drafts within national law are unquestionably along the right lines. However, these activities are undoubtedly mainly much too late and they seem to be insufficient. The amendments have to be more far-reaching in nature than it is currently proposed within elaborated already normative acts drafts.
Źródło:
Studia Prawnicze KUL; 2017, 1; 153-177
1897-7146
2719-4264
Pojawia się w:
Studia Prawnicze KUL
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sprawdzanie instalacji elektrycznych niskiego napięcia - przegląd postanowień normy PN-HD 60364-6:2016-07 w zakresie prób i pomiarów
Verification of low voltage electrical installations - a review of the provisions of the standard PN-HD 60364-6:2016-07 related to tests
Autorzy:
Czapp, S.
Powiązania:
https://bibliotekanauki.pl/articles/267107.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
instalacje elektryczne
ochrona przeciwporażeniowa
próby
pomiary
sprawdzanie
electrical installations
protection against electric shock
tests
verification
Opis:
W artykule omówiono zasady wykonywania prób i pomiarów w instalacjach elektrycznych niskiego napięcia. Dokonano przeglądu postanowień najnowszej normy dotyczącej sprawdzania instalacji i zwrócono uwagę na zmiany przez nią wprowadzone.
In the paper principles of testing of safety in low voltage systems, according to the standard PN-HD 60364-6:2016-07, are presented. The new provisions of the standard are compared with the provisions presented in the previous version: PNHD 60364-6:2008. Main changes in these provisions are underlined. It may be concluded that the new standard introduces only slight modifications to the verification process.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2017, 56; 19-26
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Techniki kotłowe dla instalacji odzysku energii z odpadów
Boiler technologies for waste-to-energy installations
Autorzy:
Pająk, T.
Powiązania:
https://bibliotekanauki.pl/articles/109254.pdf
Data publikacji:
2012
Wydawca:
AXIS MEDIA
Tematy:
techniki kotłowe
odzysk energii z odpadów
odpady komunalne
Opis:
Obecnie w Polsce jedynie 0,4% sumy masy wszystkich wytwarzanych odpadów komunalnych poddaje się procesowi termicznego przekształcania i odzysku energii, a w UE wynosi to średnio ok. 20%. W Polsce pracuje jedna spalarnia odpadów komunalnych, w UE jest ponad 400 zakładów tego typu, a w Japonii aż 1280. Pomimo stosowanych palenisk fluidalnych, nielicznych technologii zgazowania i pirolizy w Europie, dla potrzeb termicznego przekształcania odpadów komunalnych, w ostatnich trzech latach, zamawiano w krajach UE i budowano głównie technologie z paleniskiem rusztowym.
Currently, only 0.4% of the total volume of all municipal waste is used for energy recovery through thermal treatment, whereas the average in the European Union is about 20%. While Poland has only one waste incineration plant, there are over 400 facilities in the EU, and 1280 in Japan alone. Although European countries carry out the municipal waste thermal treatment utilising fluidised bed furnaces as well as few gasification and pyrolysis techniques, in the past three years technologies developed and ordered from the EU members included mainly stoker-fired furnaces.
Źródło:
Piece Przemysłowe & Kotły; 2012, 7-8; 52-58
2082-9833
Pojawia się w:
Piece Przemysłowe & Kotły
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Praktyczne obliczenia w instalacjach słonecznego ogrzewania wody
Practical calculation of solar water heating
Autorzy:
Kusto, Z.
Powiązania:
https://bibliotekanauki.pl/articles/266511.pdf
Data publikacji:
2010
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
instalacja słoneczna
ogrzewanie wody
solar installations
water heating
practical calculations
Opis:
Najbardziej efektywne pod względem technicznym i ekonomicznym jest słoneczne ogrzewanie wody użytkowej, do którego można już znaleźć obszary ekonomicznej opłacalności. W artykule skoncentrowano się na obliczeniach rocznego bilansu ciepła w instalacji słonecznego ogrzewania wody użytkowej. Do obliczeń wykorzystano charakterystyki sprawnościowe rzeczywiście istniejących kolektorów słonecznych. W opracowaniu opisano metodę postępowania przy wyborze typu kolektora najlepiej pasującego do zadanych warunków użytkowania oraz przedstawiono uzasadnienie proponowanej metody. Dodatkowo pokazano przykłady obliczeniowe.
The technical and economic effective solar low temperature water hating is the best of every possibilities of solar energy conversion. The simple method of annual solar heat balance calculation is the aim of the paper, where the basis of that balance is the efficiency characteristic of solar collectors. That method and several examples of calculation are described in the paper.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2010, 27; 31-37
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przystosowanie turbiny TG6 wraz z instalacjami pomocniczymi do współpracy z systemem ciepłowniczym
Autorzy:
Roszak, Waldemar
Powiązania:
https://bibliotekanauki.pl/articles/89363.pdf
Data publikacji:
2020
Wydawca:
Nowa Energia
Tematy:
turbiny
system ciepłowniczy
instalacje pomocnicze
turbines
district heating system
auxiliary installations
Źródło:
Nowa Energia; 2020, 2/3; 35-39
1899-0886
Pojawia się w:
Nowa Energia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Agreement on the use of land for the construction and operation of renewable energy installations – selected legal aspects
Autorzy:
Jóźwiak, Jakub
Powiązania:
https://bibliotekanauki.pl/articles/684811.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet im. Adama Mickiewicza w Poznaniu
Tematy:
renewable energy
wind farms
lease
fructus
Opis:
The paper presents an analysis of the legal nature of an agreement on the use of land for the construction and operation of renewable energy installations, especially wind farms. In particular, it focuses on the legal significance of the Supreme Court judgment of 5 October 2012 (IV CSK 244/12), which ruled that such an agreement cannot be regarded as a  lease. The author seeks to identify the possible practical consequences of this judgment and propose legislative measures to ensure the sustainability of such agreements, and thus the investments which go with them as well as to analyze the legal term fructus in the civil law in the context of this judgment.
Źródło:
Adam Mickiewicz University Law Review; 2013, 2; 29-41
2450-0976
Pojawia się w:
Adam Mickiewicz University Law Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kryteria doboru przewodów w instalacjach fotowoltaicznych
Selection Criteria of Wires in Photovoltaic Installations
Autorzy:
Trzmiel, G.
Węsierska, M.
Powiązania:
https://bibliotekanauki.pl/articles/377707.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
instalacja fotowoltaiczna
PV
dobór i przekroje przewodów
uwagi montażowe
Opis:
W artykule przedstawiono najważniejsze etapy i kryteria doboru przewodów w instalacjach fotowoltaicznych. Wspomniano również o wymaganiach i normach dla przewodów w systemach fotowoltaicznych. Zamieszczono też przykład obliczeniowy doboru oprzewodowania w przykładowym projekcie instalacji fotowoltaicznej (PV).
The article presents the most important stages and criteria for the selection of cables in photovoltaic installations. It was also mentioned about the requirements and installation notes for wires in PV systems. The article also contains the calculation example of wiring selection in the sample project installation of photovoltaic (PV).
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2017, 89; 425-433
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Współczesne problemy eksploatacji w melioracjach
Contenporary problems in melioration
Autorzy:
Nyc, K.
Pokładek, R.
Powiązania:
https://bibliotekanauki.pl/articles/339143.pdf
Data publikacji:
2004
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
eksploatacja urządzeń
melioracje
systemy wodno-melioracyjne
exploitation of installations
melioration
water-melioration systems
Opis:
W pracy zwrócono uwagę na odpowiednie wykorzystanie urządzeń melioracyjnych, które w Polsce znajdują się na 36% powierzchni użytków rolnych. Skutki melioracji są uwarunkowane poziomem eksploatacji urządzeń, a także poziomem rolniczego użytkowania terenów. W wyniku doskonalenia procesów eksploatacyjnych użytkowania i utrzymania urządzeń melioracyjnych można nie tylko intensyfikować produkcję rolną, lecz także poprawiać jakość środowiska, m.in. przez poprawę jakości wód odpływających ze zmeliorowanych obiektów. W celu poprawy jakości środowiska proponuje się docelowo czterokrotne zwiększenie powierzchni nawadnianej, stosowanie zasobo- i energooszczędnych systemów gospodarowania wodą, zwiększenie dużej i małej retencji wodnej. Zwrócono również uwagę na potrzebę doskonalenia struktur organizacyjnych służb wodno-meliora-cyjnych i zasad finansowania kompleksowej gospodarki zasobami wodnymi w kraju.
Appropriate utilization of melioration facilities (which are installed on 36 % of croplands in Poland ) is the focus of this paper. The effects of reclamation depend on the level of exploitation of these devices and on the extent of agricultural land use. Improvements in exploitation and maintenance of reclamation facilities may intensify agricultural production but may also improve environmental status through e.g. the improvement of water quality in outflows from the reclaimed objects. For this purpose it is proposed to enlarge fourfold the irrigated areas, to use energy and resource saving systems of water management and to expand small and large water retention. The need for improving the organization of water-reclamation services and the principles of financing water management in the country is also underlined in this paper.
Źródło:
Woda-Środowisko-Obszary Wiejskie; 2004, 4, 1; 31-46
1642-8145
Pojawia się w:
Woda-Środowisko-Obszary Wiejskie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energooszczędne instalacje inteligentne w obiektach agroturystycznych
Energy efficient systems in agrotourism
Autorzy:
Horyński, M.
Powiązania:
https://bibliotekanauki.pl/articles/311922.pdf
Data publikacji:
2013
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
gospodarstwo agroturystyczne
energooszczędność
inteligentne instalacje elektryczne
agrotouristic farm
energy efficiency
intelligent electrical installations
Opis:
Corocznie szeroka oferta wakacyjna zawiera również propozycje dla ludzi pragnących bliższego kontaktu z naturą. Próbą spełnienia ich wymagań są coraz liczniej powstające gospodarstwa agroturystyczne. Agroturystyka jest formą wypoczynku występującą na obszarach wiejskich o charakterze rolniczym. Opiera się ona o bazę noclegową i aktywny wypoczynek w gospodarstwie rolnym i jego otoczeniu. Gospodarstwa agroturystyczne są przeważnie firmami rodzinnymi. Coraz częściej priorytetem przy projektowaniu i planowaniu takiej działalności, oprócz wygody gości, jest energooszczędność. Zwraca się również uwagę na ochronę środowiska naturalnego. Artykuł omawia zagadnienia związane z zastosowaniem inteligentnych instalacji elektrycznych w gospodarstwie agroturystycznym.
Each year a wide range of holiday also contains proposals for people wishing to closer contact with nature. An attempt to meet their needs are becoming more and more farms emerging. Cottagesvacation rentals is a form of relaxation which occurs in rural areas agricultural in nature. It is based on the base and an active holiday on the farm and its environment. Farms are mostly family companies. Increasingly a priority in the design and planning of such activities, in addition to the convenience, is energy efficiency. Is also attention to the protection of the environment. The article discusses issues related to the use of intelligent electrical installations in farm.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2013, 14, 3; 273-280
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aplikacja internetowa wspomagająca proces projektowania instalacji elektrycznych
Application to support the design process of electrical installations
Autorzy:
Koterba, K.
Kasprzyk, L.
Powiązania:
https://bibliotekanauki.pl/articles/376912.pdf
Data publikacji:
2015
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
aplikacje internetowe
bazy danych
instalacje elektryczne
Opis:
W artykule przedstawiono koncepcję aplikacji internetowej wspomagającej proces projektowania instalacji elektrycznych. Scharakteryzowano instalacje elektryczne pod kątem ich projektowania w oparciu o aktualnie obowiązujące normy i przepisy. Opisano także technologie, w których powstała aplikacja. Przedstawiono strukturę bazodanową systemu funkcjonującą w projekcie wraz z opisem aplikacji. W końcowej części pracy zaprezentowano funkcjonalności aplikacji i opisano udogodnienia zastosowane w systemie, a następnie przedstawiono uwagi końcowe i wnioski.
The paper presents the concept of a web application supporting the process of electrical installations designing. Electrical installations was characterized in terms of their design, based on the current standards and regulations. Also internet technologies where application was created was described. It showed the structure of a database system functioning in the project along with a description of the application. In the final part of the paper authors presented the application functionality and described facilities used in the system, and the final remarks and conclusions.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2015, 82; 113-121
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie dynamiczne instalacji termofotowoltaicznych
The dynamical modelling of thermophotovoltaic installations
Autorzy:
Papis, Karolina
Frączek, Michał
Filipowicz, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/2065523.pdf
Data publikacji:
2019
Wydawca:
Politechnika Częstochowska
Tematy:
odnawialne źródła energii
fotowoltaika
fototermika
renewable energy sources
photovoltaics
photothermics
Opis:
Ze względu na rosnące zapotrzebowanie na energię z odnawialnych źródeł konieczne jest poszukiwanie nowych sposobów jej pozyskania. Jednym ze sposobów na maksymalizację wykorzystania promieniowania słonecznego jest konstrukcja hybrydowych kolektorów słonecznych. Są one w stanie generować energię elektryczną z wyższą sprawnością niż standardowe instalacje ze względu na układ chłodzenia cieczowego, dodatkowym zyskiem jest podgrzewanie wody do późniejszego wykorzystania do celów grzewczych. W pracy przedstawiono model dynamiczny oraz analizę parametrów pracy monokrystalicznego panelu fotowoltaicznego połączonego z kolektorem, tworzących prototypowy układ PVT. Na podstawie badań eksperymentalnych wyznaczono charakterystyki prądowo-napięciowe i prądowo-mocowe części fotowoltaicznej oraz parametry cieplne pracy układu, które posłużyły do walidacji stworzonego modelu dynamicznego instalacji. Symulacje przeprowadzone w programie TRNSYS pozwoliły na analizę pracy różnych układów w trakcie roku.
In response to rising demand for renewable energy it is necessary to search for new ways of its production. One of the high-efficient solutions might be the hybrid of photovoltaic cells and photothermic collectors. Its final electric efficiency outmatches any other standard installations due to its liquid cooling. Additional advantage is heat of the mentioned cooling fluid which may be used for production of domestic hot water. This thesis presents the results of computer dynamic model and practical analysis of monocrystalline photovoltaic module and heating collector bind together to create hybrid PVT system. The experimental studies allowed to define the electrical and thermal characteristics of system with hybrid solar collector, which were used to validation of created dynamic model. Simulations in TRNSYS software enabled analysis of operating parameters of various installations during the year.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2019, 8, 1; 103--113
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of a framework of safety goals for nuclear installations and its application in Germany
Autorzy:
Berg, H. P.
Powiązania:
https://bibliotekanauki.pl/articles/2069336.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Morski w Gdyni. Polskie Towarzystwo Bezpieczeństwa i Niezawodności
Tematy:
safety goals
safety assessment
safety verification
multi-units
Opis:
The International Atomic Energy Agency has started a few years ago a project to enhance the existing framework for safety goals for nuclear installations and currently is finalizing a publication aimed to provide guidance for a more holistic approach to establishing and utilizing safety goals for nuclear installations. The intention was to develop a more consistent and holistic framework for safety goals that would be composed of a hierarchical structure of qualitative concepts (e.g. defense in depth, various safety requirements) and quantitative risk metrics. The safety goals should be technology neutral at the higher level and should cover both normal operation and accident conditions as well as the risk to workers, public, and the environment. In the paper the development of a hierarchical framework for safety goals is described including a methodology to derive lower-(more technical) safety goals from the higher goals. Moreover a process for assessing the degree of compliance with the safety goals and their consistent use is provided. As an example the developed framework is applied to the German regulatory framework for nuclear installations but focused on nuclear power plants.
Źródło:
Journal of Polish Safety and Reliability Association; 2015, 6, 1; 15--22
2084-5316
Pojawia się w:
Journal of Polish Safety and Reliability Association
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Doświadczalna instalacja do ciągłej granulacji bębnowej
The experimental installation for continuous drum granulation
Autorzy:
Obraniak, A.
Gluba, T.
Powiązania:
https://bibliotekanauki.pl/articles/1218975.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
ciągła granulacja bębnowa
instalacje doświadczalne
continuous drum granulation
experimental installations
Opis:
W pracy opisano doświadczalną instalację do bębnowej granulacji ciągłej o wydajności 500 kg/h.
The experimental installation for continuous drum granulation with a capacity of 500 kg/h was presented in the paper.
Źródło:
Chemik; 2012, 66, 5; 501-508
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Good practice in construction of flexible soil-steel structures. Well done installations of buried bridges
Autorzy:
Tomala, P.
Stachowicz, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/383572.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
buried structure
water protect
support
drainage
animal overpass
Opis:
The following article raises questions on good practices that should accompany both the design and installation process of corrugated soil-steel bridges. Solutions for crucial elements of soil-steel structures developed over the years of experience and observations are put forward. The authors put special emphasis on issues related to the flexible soil-steel structures protection against water and point to new developments in the waterproof design area. The paper presents examples of properly executed civil engineering facilities, which indicated further development directions. The authors wish to draw attention to the fact that with the popularization of corrugated steel plate bridges the necessity of dissemination of correct and reliable solutions among designers and contractors increases. They provide a guarantee for long and seamless bridge utilization.
Źródło:
Archiwum Instytutu Inżynierii Lądowej; 2017, 23; 269-278
1897-4007
Pojawia się w:
Archiwum Instytutu Inżynierii Lądowej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie i ocena przewodów i kabli elektrycznych
Testing and assessment of electric cables
Autorzy:
Figiel, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/199234.pdf
Data publikacji:
2019
Wydawca:
Instytut Techniki Górniczej KOMAG
Tematy:
kable elektryczne
instalacje kablowe
badania kabli
electrical cables
cable installations
cable tests
Opis:
Przewody i kable elektryczne, optyczne i telekomunikacyjne, zanim zostaną wprowadzone do obrotu handlowego, podlegają ocenie za którą odpowiada ich producent. Użytkownik instalacji kablowych jest z kolei odpowiedzialny za prawidłowy dobór kabli i przewodów, ze względu na bezpieczeństwo osób użytkujących instalację. W artykule zaprezentowano wymagania dotyczące kabli i przewodów elektrycznych przeznaczonych do stosowania w podziemnych zakładach górniczych oraz zakres badań wymaganych podczas oceny dokonywanej przez ITG KOMAG.
Before being placed on the market, electrical, optical and telecommunication cables shall undergo an assessment under the responsibility of their manufacturer. The user of the cable systems is responsible for the correct selection of cables for the safety of the persons using the system. The article presents the requirements for electrical cables intended for use in underground mines and the scope of tests required during the assessment carried out by ITG KOMAG.
Źródło:
Maszyny Górnicze; 2019, 37, 3; 3-9
0209-3693
2450-9442
Pojawia się w:
Maszyny Górnicze
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Installations based on high efficiency high repetition rate miniature DPF chambers for material science
Autorzy:
Dubrovsky, A.
Gribkov, V.
Powiązania:
https://bibliotekanauki.pl/articles/146795.pdf
Data publikacji:
2000
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
dense plasma focus (DPF)
miniature focus chamber
PF instalation
Opis:
The report describes two DPF installations based on a miniature plasma focus chamber: the installation PF-3 of the energy store W = 3 kJ and the installation PF-0.2 (W = 200 J). The possibility of an adaptation of the small DPF device for the experimental samples irradiation is reported. A new construction intended for experiments with samples of various materials is presented.
Źródło:
Nukleonika; 2000, 45, 3; 159-162
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Procesy cieplne zachodzące w instalacjach z dachówkami fotowoltaicznymi
Thermal processes taking place in installations with photovoltaic roof tiles
Autorzy:
Kurz, D.
Powiązania:
https://bibliotekanauki.pl/articles/376432.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
dachówka fotowoltaiczna
konwekcja
radiacja
kondukcja
przejmowanie ciepła
Opis:
W pracy przedstawiono klasyfikację sposobów przejmowania ciepła oraz sposób postępowania podczas wyznaczania równań kryterialnych w zależności od rodzaju wymiany ciepła. Opisano współczynniki przejmowania ciepła oraz opór przejmowania ciepła przez konwekcję. Wskazano schemat postępowania w celu wyznaczenia ilościowego przepływu ciepła w rozpatrywanym układzie dachówek fotowoltaicznych instalowanych w konstrukcji dachu.
The paper presents the classification of methods of heat transfer, and the procedure when determining criterion equations depending on the type of heat exchange. Describes the heat transfer coefficients and resistance of heat transfer by convection. Indicated workflow to determine the quantitative heat flow in the present system of photovoltaic roof tiles installed in the roof structure.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2016, 87; 97-108
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Amoniak w instalacjach chłodniczych przemysłu rolno-spożywczego
Ammonia in cooling installations for the agri-food industry
Autorzy:
Ubowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/957907.pdf
Data publikacji:
2016
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
amoniak
czynnik chłodniczy
zagrożenia
bezpieczeństwo
ammonia
refrigerant
hazard
safety
Opis:
Amoniak jako czynnik chłodniczy stosowany jest już od ponad 150 lat. Jego właściwości toksyczne nie bez podstaw budzą obawy użytkowników, jednakże dostępne środki ochrony indywidualnej i zbiorowej, stosowane zabezpieczenia i procedury umożliwiają ograniczenie ryzyka związanego z jego użyciem do minimum. Niedopuszczenie do niekontrolowanego wycieku amoniaku z instalacji chłodniczej w przemyśle rolno-spożywczym jest istotną kwestią nie tylko ze względu na zdrowie i życie pracowników, ale również ze względu na możliwe straty magazynowanego towaru. Aby ułatwić pracę osobom odpowiedzialnym za bezpieczeństwo instalacji chłodniczych wykorzystujących jako czynnik chłodniczy amoniak, w artykule zaproponowano listę pytań kontrolnych. Pytania zawarte w liście pozwalają zapewnić bezpieczeństwo pracy instalacji, ale również sprostać wymaganiom ustawodawcy w tym zakresie.
Ammonia as a refrigerant has been used for more than 150 years. Its toxic properties justifiably raise concerns of users, but the available means of individual and collective protection, as well as the security measures and procedures can mitigate the risks associated with its use to a minimum. To prevent the uncontrolled release of ammonia from the refrigeration system in such branches as the agri-food industry is an important issue not only because of the health and lives of employees, but also because of the possible loss of stored goods. To facilitate the work of those responsible for the safety of refrigeration systems using ammonia as a refrigerant, a suggested checklist is presented m this paper. The questions included on the list can help not only ensure the safety of the installation but also meet the demands of legislators in this regard.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2016, 1; 14-17
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kierunki rozwoju produkcji kwasu siarkowego w instalacjach typu metalurgicznego
Trends of sulfuric acid production in metallurgical installations
Autorzy:
Grzesiak, P.
Powiązania:
https://bibliotekanauki.pl/articles/1287212.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
kwas siarkowy
rozwój produkcji
sulfuric acid
production improvement
Opis:
Przedstawiono stan i kierunki rozwoju technologii w krajowym potencjale produkcji kwasu w odniesieniu do technik wyznaczonych jako BAT.
State and development of trends intechnology of sulfuric acid production in Poland in relation to the technologies defined as BAT, were presented.
Źródło:
Chemik; 2010, 64, 6; 462-469
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the impact of external flooding to nuclear installations
Autorzy:
Berg, H. P.
Fröhmel, T.
Winter, C.
Powiązania:
https://bibliotekanauki.pl/articles/2069618.pdf
Data publikacji:
2007
Wydawca:
Uniwersytet Morski w Gdyni. Polskie Towarzystwo Bezpieczeństwa i Niezawodności
Tematy:
nuclear power plant
probabilistic safety analysis
external flooding
protection
tsunami
Opis:
The German regulatory body has issued probabilistic safety assessment guidelines, elaborated for a comprehensive integrated safety review of all NPP in operation and containing a newly developed graded approach for the probabilistic assessment of external flooding. Main aspects are explained such as the underlying probabilistic considerations and the mathematical procedures for the calculation of exceedance frequencies. Exemplarily it has been investigated if extreme events such as tsunami waves could be a hazard for NPP at coastal sites in Germany.
Źródło:
Journal of Polish Safety and Reliability Association; 2007, 1; 9--16
2084-5316
Pojawia się w:
Journal of Polish Safety and Reliability Association
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowoczesne urządzenia i systemy w instalacjach pianowych
Modern systems and devices in foam installations
Autorzy:
Marjanek, K.
Powiązania:
https://bibliotekanauki.pl/articles/136439.pdf
Data publikacji:
2011
Wydawca:
Szkoła Główna Służby Pożarniczej
Tematy:
bezpieczeństwo pożarowe w bazach paliw
instalacje pianowe
zagrożenia pożarowe baz paliw
Opis:
In recent years, we have observed a continuous increase in demand for natural resources, without which economic development, and hence the development our country, would not be possible. Energy security of our country depends largely on two factors: the possibility of capacitive storage of sub stances such as oil, petrol, diesel and heating oil, as well as the level of protection of these sites, or storage facilities. Existing provisions offer greater flexibility for users to choose the kind of security. Unfortunately, due to this lack of clarification of requirements depending on the specific cases, users of ten choose the cheapest option, not necessarily adapted to the types of risks that may come in the future. Over many years, analyzing the solutions and looking at those now formed, you may notice subtle progress in the awareness of users, and thus, a more substantive approach to the ways of protection against fire. But still looking at the matter of fire protection for the whole country, we realize how much is yet to come. Building awareness among users is only one of the aspecs used to improve fire safety in most investments for the energy security of our country. According to the principle that it is easier (and in this case certainly cheaper) to prevent than to cure, the presented security analysis contains a description of the existing types, their pros and cons, as well as a summary, in what direction should our efforts be focused in the future so that we approach the level of security of world leaders in this field.
Źródło:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej; 2011, 42; 157-165
0239-5223
Pojawia się w:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Photovoltaic systems - types of installations, materials, monitoring and modeling - review
Autorzy:
Andula, Angelika
Heim, Dariusz
Powiązania:
https://bibliotekanauki.pl/articles/105804.pdf
Data publikacji:
2020
Wydawca:
Centrum Badań i Innowacji Pro-Akademia
Tematy:
photovoltaic systems
BIPV
BAPV
PV/T
energy sources
modeling
systemy fotowoltaiczne
źródła energii
modelowanie
Opis:
Photovoltaic systems have become a common solution for, both small residential buildings as well as large service buildings. When buildings are being designed, it is important to focus on the aspect of the object's energy efficiency as lowering the energy consumption of a given facility is crucial. The article discusses the use of photovoltaic panels such as so-called BAPV (Building Applied Photovoltaics) and BIPV (Building Installed Photovoltaics) installations as well as photovoltaic thermal systems (PV/T), which generate both electricity and heat. The role of PV installation in so-called zero energy buildings and proposals for future research and solutions are also discussed.
Źródło:
Acta Innovations; 2020, 34; 40-49
2300-5599
Pojawia się w:
Acta Innovations
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ogniwa fotowoltaiczne w elektrycznych instalacjach zasilających
Photovoltaic cells in electrical power supply installations
Autorzy:
Malicki, W.
Miedziński, B.
Rutecki, K.
Habrych, M.
Powiązania:
https://bibliotekanauki.pl/articles/186433.pdf
Data publikacji:
2010
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technik Innowacyjnych EMAG
Tematy:
ogniwo fotowoltaiczne
zasilanie
photovoltaic cell
power supply
Opis:
W artykule przedstawiono możliwości wykorzystania ogniw fotowoltaicznych w elektrycznych instalacjach zasilających urządzenia, w szczególności te, których podłączenie do sieci elektrycznej jest kosztowne lub wręcz niemożliwe do zrealizowania. Omówiono sposób rozwiązania autonomicznego systemu czujnikowego do monitorowania warunków środowiskowych z uwzględnieniem efektywności i niezawodności zasilania energią elektryczną pozyskiwaną z energii słonecznej w tegorocznych bardzo trudnych warunkach zimowych na terenie Wrocławia. Wskazano na praktyczne korzyści wynikające ze stosowania przedmiotowych ogniw, zwracając jednak uwagę na konieczność dokonywania bilansu energetycznego dla rzeczywistych warunków środowiskowych i klimatycznych.
The article presents possible applications of photovoltaic cells in electrical power supply installations which supply various devices, particularly those whose connection with the electrical network is either very expensive or impossible to carry out. The authors described an autonomous sensor system for monitoring environmental conditions with respect to efficiency and reliability of supplying electrical energy derived from solar energy at very difficult winter conditions in the city of Wrocław in 2010. Practical benefits were listed, resulting from the use of these cells, however, the necessity to prepare energy balance reports for real environmental and climatic conditions was stressed.
Źródło:
Mechanizacja i Automatyzacja Górnictwa; 2010, R. 48, nr 7, 7; 121-125
0208-7448
Pojawia się w:
Mechanizacja i Automatyzacja Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Automatyzacja prac projektowych przy użyciu programu Panel Connector
Automation of design using the Panel Connector program
Autorzy:
Rocki, Dariusz
Powiązania:
https://bibliotekanauki.pl/articles/277638.pdf
Data publikacji:
2020
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
BIM
Revit
automatyzacja
projektowanie
instalacje elektryczne
automation
designing
electrical installations
Opis:
W pracy wskazano sposoby ułatwiające wdrażanie technologii modelowania informacji o budynku BIM w biurach projektowych przez wprowadzenie narzędzi optymalizacyjnych. Niniejsze opracowanie prezentuje propozycję oryginalnego podejścia do tego zagadnienia zrealizowanego w środowisku Dynamo z użyciem języka Python i dokumentacji Revit API, które umożliwia automatyczne podłączanie do wybranej tablicy opraw oświetleniowych, gniazd elektrycznych oraz innych urządzeń wymagających zasilania. Opisana metoda opiera się na obserwacji zachowań projektanta w trakcie tworzenia dokumentacji i odwzorowanie ich poprzez skrypt współpracujący z oprogramowaniem Revit. Rezultatem zastosowania proponowanego rozwiązania jest znaczne przyspieszenie prac projektowych, zwiększenie dokładności oraz możliwość wyznaczenia spadków napięć.
This work aims to show ways to facilitate the implementation of BIM in design offices by automation of work. An example program to achieve this goal is a script created in Dynamo environment using Python language and Revit API documentation that allows to automatically connect lighting fixtures, sockets and other devices to a selected switchboard. The described method is based on observing the designer behaviour during the development of documentation and mapping them with a script cooperating with Revit software.
Źródło:
Pomiary Automatyka Robotyka; 2020, 24, 3; 43-49
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biogazownie rolnicze w rozwoju małoskalowych instalacji odnawialnych źródeł energii w Polsce
Agricultural biogas plants in the development of small-scale renewable energy installations in Poland
Autorzy:
Chodkowska-Miszczuk, J.
Powiązania:
https://bibliotekanauki.pl/articles/790819.pdf
Data publikacji:
2015
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Opis:
W artykule zaprezentowano biogazownie rolnicze w kontekście rozwoju małoskalowych instalacji odnawialnych źródeł energii (OZE) w Polsce. Przedstawiono projekty małych biogazowni rolniczych (o średniej mocy zainstalowanej około 0,1 MW) w kontekście rozwoju generacji rozproszonej jako przykład małoskalowych instalacji odnawialnych źródeł energii w Polsce. Omówiono egzogeniczne i endogeniczne uwarunkowania rozwoju instalacji biogazowych w Polsce. Zwrócono uwagę na to, że projekty małych biogazowni rolniczych powstają w gminach wyróżniających się na tle kraju m.in. znacznie większą średnią powierzchnią gospodarstw rolnych, wynoszącą 11 ha (średnia wielkość gospodarstw rolnych w skali Polski to 7 ha). Ponadto gminy te cechuje większy udział gospodarstw rolnych utrzymujących zwierzęta.
The aim of the article is to present agricultural biogas plants in the context of the development of small-scale renewable energy installations in Poland. The projects of small agricultural biogas plants (with an average installed capacity of about 0.1 MW) are presented in the context of the development of distributed generation in Poland. The both exogenous and endogenous factors of the development of agricultural biogas plants in Poland are discussed. It must be noted that the projects of small agricultural biogas are noted in gminas which distinguish oneself inter alia larger an average farm size, i.e. 11 ha (the average farm size in Poland is 7 ha) with livestock.
Źródło:
Roczniki Naukowe Ekonomii Rolnictwa i Rozwoju Obszarów Wiejskich; 2015, 102, 1
2353-4362
Pojawia się w:
Roczniki Naukowe Ekonomii Rolnictwa i Rozwoju Obszarów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ewolucja instrumentów regulacyjnych wspierających rozwój mikroinstalacji w Polsce w latach 2005-2019 - wybrane zagadnienia
Evolution of Regulatory Instruments Supporting the Development of Micro-Installations in Poland in 2005–2019 – Selected Issues
Эволюция нормативных инструментов, поддерживающих развитие микроустановок в Польше в 2005–2019 годах – избранные вопросы
Autorzy:
Borkowski, Krzysztof
Ćwikliński, Henryk
Powiązania:
https://bibliotekanauki.pl/articles/1957180.pdf
Data publikacji:
2020-06-30
Wydawca:
Wydawnictwo Adam Marszałek
Tematy:
micro-installations
Energy Policy
installer companies
net metering
микроустановки
энергетическая политика
монтажные компании
система чистого измерения
Opis:
This paper analyzes the development of micro-installations in 2005-2019 against the background of changes of the national energy policy, in particular of the introduction and subsequent modifications of the dedicated support schemes. Based on a survey conducted among micro-installations installer companies in 2016, when the future of residential micro-installations was still uncertain, the authors identified key regulatory barriers hindering the growth of the rising market and the effect energy policy changes had on those barriers in 2016-2019. The study is divided into introduction, conclusion and three parts describing the research background, methods and results. The first part contains a description of the energy policy regulations relevant to the development of micro-installations in 2005-2016. The second part presents the methodology and the results of the survey. The third part analyzes the development of micro-installations in 2017-2019 within the context of the identified barriers. In the summary, key regulatory challenges were described and scope for further research on the micro-installation market in Poland was set.
В данной статье описывается развитие микроустановок в 2005-2019 годах на фоне государственной энергетической политики, в частности, внедрение и последующее изменение специальных инструментов поддержки. На основе опроса, проведенного среди монтажных компаний в 2016 году, были выявлены основные регуляторные барьеры для развития микроустановок, и в этом контексте были описаны изменения, внесенные в национальную энергетическую политику в 2016-2019 годах. Исследование было разделено на введение, заключение и три части, описывающие контекст, используемые методы и результаты исследования. В первой части представлена энергетическая политика Польши в области микроустановок в 2005-2016 гг. с данными, иллюстрирующими развитие микроустановок в этот период. Во второй части представлены методология и результаты опроса монтажных компаний, проведенного в 2016 году, с целью выявления препятствий для развития микроустановок. В третьей части представлено развитие микроустановок в 2017-2019 годах в контексте выявленных барьеров. В заключении подводятся итоги исследования, описываются основные регуляторные проблемы и излагаются потенциальные направления дальнейших исследований рынка микроустановок в Польше.
Źródło:
Studia Orientalne; 2020, 1(17); 117-141
2299-1999
Pojawia się w:
Studia Orientalne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prawa prosumenta na rynku energii elektrycznej
Rights of the prosumer in the electricity market
Autorzy:
Przybylska, Monika
Powiązania:
https://bibliotekanauki.pl/articles/508401.pdf
Data publikacji:
2017-05-31
Wydawca:
Uniwersytet Warszawski. Wydawnictwo Naukowe Wydziału Zarządzania
Tematy:
prosument
mikroinstalacja
energia odnawialna
wytwórca
konsument
Prosumer
micro-installations
renewable energy
producer
consumer
Opis:
Artykuł odnosi się do sytuacji prawnej prosumenta, jako uczestnika rynku energii elektrycznej, a ściślej podmiotu, któremu ustawodawca przyznał prawo wytwarzania energii elektrycznej z odnawialnych źródeł energii w mikroinstalacji. Rozważania zaprezentowane w niniejszym artykule są dychotomiczne i tym samym spójne z ekonomiczną oraz prawną koncepcją prosumenta w gospodarce rynkowej, w tym na rynku energii elektrycznej. Analiza dotyczy z jednej strony sytuacji prawnej prosumenta w zakresie czynności polegających na wytwarzaniu energii elektrycznej, a z drugiej warunków jej wykorzystania w celu zaspokojenia własnych potrzeb. Podjęte zagadnienie jest o tyle istotne, że dopiero od 1 lipca 2016 r. obowiązuje w porządku prawnym legalna definicja prosumenta, która stanowi podstawę podjętych rozważań i tym samym wyznacza zakres praw prosumenta na rynku energii odnawialnej.
This article refers to the legal status of a prosumer as a participant of the electricity market or, more precisely, to an entity to which the legislator has granted the right to produce electricity from renewable energy sources in micro-installations. The considerations presented in this article are twofold, and thus coherent with the economic and legal concept of a prosumer in the market economy, including the electricity market. The analysis concerns, on the one hand, the prosecutor’s legal situation in the field of electricity generation activities as well as, on the other hand, the conditions of the use of self generated electricity in order to meet their own needs. The issue is important because the legal definition of a prosumer is a new concept in the legal order.
Źródło:
internetowy Kwartalnik Antymonopolowy i Regulacyjny; 2017, 6, 3; 101-107
2299-5749
Pojawia się w:
internetowy Kwartalnik Antymonopolowy i Regulacyjny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Safety aspects for the R290 (propane) as working medium in small air conditioning installations
Autorzy:
Grzebielec, Andrzej
Rusowicz, Artur
Szelągowski, Adam
Powiązania:
https://bibliotekanauki.pl/articles/1537219.pdf
Data publikacji:
2021
Wydawca:
Centrum Rzeczoznawstwa Budowlanego Sp. z o.o.
Tematy:
refrigeration
refrigerant
propane
R290
chłodzenie
chłodziwo
propan
Opis:
Following the entry into force of the Regulation (EU) No 517/2014 of the European Parliament and of the Council of 16 April 2014 on fluorinated greenhouse gases and repealing Regulation (EC) No 842/2006, the scope of refrigerants, which have so far been commonly used is very limited. All preferred refrigerants are mostly flammable and explosive, and they include R32, R1234yf, R1234ze, R290 (propane), R600a (isobutane), R717 (ammonia). However, it should be noted that refrigerants such as R32, R1234yf, R1234ze are classified as mildly flammable and has been created for them, in accordance with ISO 817 standard, special group called A2L. It is also worth noting that the new classification moved ammonia to the group B2L - that means is toxic and mildly flammable. The article focuses on defining the conditions in which there is possible to build safely split installation in which the propane is a refrigerant. It turns out that small splits are devices which can be used safely with R290 in most cases.
Źródło:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych; 2021, 2; 22-29
2450-1859
2450-8721
Pojawia się w:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Offshore wind farms in Europe and worldwide : the possibilities of selected countries and the state of development of installations in Poland
Autorzy:
Prugar, Jakub
Powiązania:
https://bibliotekanauki.pl/articles/101768.pdf
Data publikacji:
2019
Wydawca:
Instytut Polityki Energetycznej im. Ignacego Łukasiewicza
Tematy:
offshore
renewable energy sources
Baltic Sea
Opis:
The offshore sector is one of the most dynamically developing branches of the economy. The countries with access to the sea in this sector see an opportunity to produce cheap clean energy. One of the countries which may become beneficiaries of the development of this technology is Poland, because the Baltic Sea has excellent conditions for generating energy by means of wind farms.
Źródło:
Energy Policy Studies; 2019, 1 (3); 41-48
2545-0859
Pojawia się w:
Energy Policy Studies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza pracy sieciowych instalacji fotowoltaicznych z wykorzystaniem oprogramowania symulacyjnego
Analysis of photovoltaic grid installations performance using simulation software
Autorzy:
Bugała, A.
Bednarek, K.
Powiązania:
https://bibliotekanauki.pl/articles/377169.pdf
Data publikacji:
2018
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
zysk energetyczny
fotowoltaika
układ sieciowy
symulacja komputerowa
Opis:
W pracy przedstawiono analizę porównawczą efektywności energetycznej instalacji fotowoltaicznej przyłączonej do sieci elektroenergetycznej, przeprowadzoną na podstawie rejestracji dobowej produkcji energii elektrycznej oraz symulacji komputerowej. Prognozowanie uzysku energetycznego przeprowadzono z wykorzystaniem oprogramowania PVSol, które umożliwia oszacowanie czasowej produkcji energii elektrycznej z uwzględnieniem lokalnych danych klimatycznych oraz zjawiska zacienienia obiektu. Na podstawie uzyskanych wyników pomiarów i symulacji określono korelację wartości wielkości mierzonej z wyznaczeniem wybranych parametrów analizy statystycznej. Przeprowadzona analiza może być szczególnie przydatna na etapie planowania czasu zwrotu nakładów inwestycyjnych, a także w przypadku analiz ekonomicznych.
The paper presents a comparative analysis of the energy efficiency of a photovoltaic installation connected to a power grid carried out on the basis of daily energy production and computer simulation. Forecasting of the energy profit was carried out using the PVSol software, which allows estimating the temporary production of electricity, taking into account local climate data and the phenomenon of shading the object. On the basis of the obtained measurement and simulation results, the correlation of the value of the measured value with the determination of selected parameters of the statistical analysis was determined. The conducted analysis may be particularly useful at the stage of planning the return time of investment outlays as well as in the case of economic analyzes.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2018, 94; 235-244
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Environment friendly electric motors for driving low-power farm devices and municipal installations
Autorzy:
Idziak, P.
Barański, M.
Powiązania:
https://bibliotekanauki.pl/articles/101500.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
induction motor
Line Start Permanent Magnet Synchronous Motor
LSPMSM
efficiency
cogging torque
Opis:
The article presents the most important causes of energy losses in magnetic circuits of electrical machines and describes a new design of a synchronized induction motor. The basic operational parameters of two structures: induction machine with squirrel cage (IM) and newly designed machine with a rotor with permanent magnets and a copper squirrel cage (induction machine synchronized with self-starting (LSPMSM) have been identified and compared. Performance characteristics were determined for work in steady states. In both cases the stator, type Sg 100L-4B of 3 kW induction motor was used. It has been shown that the PSPMSM supplied from the public mains grid shows the efficiency approx. 5% higher than the conventional motor. The influence of the change in the supply voltage frequency on the work of both structures was tested, i.e. on the measured efficiency, power factor and the electricity from electrical grid. Studies have shown that the LSPMSM can be a replacement for an induction motor. It has been shown that the torque pulsations occurring in the new structure (cogging torque) do not increase the environmental risks.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2016, III/1; 823-833
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
«Installations de protection speciale» dans le cadre de la preparation de la defense nationale
Autorzy:
Karabin, Jarosław Kamil.
Powiązania:
Zeszyty Doktoranckie Wydziału Bezpieczeństwa Narodowego / Akademia Obrony Narodowej. Wydział Bezpieczeństwa Narodowego 2013, nr 3(8), s. 253-266
Data publikacji:
2013
Tematy:
Ochrona i obrona obiektów wojskowych Polska
Obiekty wojskowe ochrona i obrona Polska
Opis:
Bibliogr.
Dostawca treści:
Bibliografia CBW
Artykuł
Tytuł:
Modern architecture – residential buildings
Autorzy:
Kłopotowski, Maciej
Gawryluk, Dorota
Powiązania:
https://bibliotekanauki.pl/chapters/31030254.pdf
Data publikacji:
2019
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
Housing development.
residential architecture
building materials
Opis:
A review of European housing developments over the past 100 years shows that these buildings have consistently been in line with the current artistic, architectural and social trends. Their quality and standard always resulted from economic conditions. That is also true today. It should also be noted that the split and division of Europe to the east and west (existing in the 20th century) has almost completely disappeared. The tendencies of globalization lead to the emergence of buildings entirely outside the context of location. Their architectural forms are subject to unify and branch of from local traditions. This is supported by the global architecture market, with developers realizing their projects almost everywhere in the world. Today’s multi-family residential buildings are expected to astound recipients. This leads to the formation of “strange” mind-blowing realizations. The next few years will bring more surprises. It is therefore impossible to point out one leading aesthetic tendency, because it is now replaced by impossible to define diversity.
Źródło:
Buildings 2020+. Constructions, materials and installations; 29-52
9788365596703
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modern architecture – public buildings
Autorzy:
Gawryluk, Dorota
Kłopotowski, Maciej
Powiązania:
https://bibliotekanauki.pl/chapters/30985635.pdf
Data publikacji:
2019
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
architecture
walls
Openings
Columns and beams
foundations
Opis:
Architecture is an area of art which, due to its public character, has always interacted with the recipient. It happens also today. Contemporary architects create modern constructions. When we look at them, we create an image of contemporariness. This process is continuous. We cannot say whether the icons of the architecture of our time have already arisen, whether the existing stylistic trends will continue to develop or, on the contrary, they will disappear. But we can be sure that new, even more “weird” structures will be created soon. Surely the inspiration for their creation will be the new civilization achievements of mankind.
Źródło:
Buildings 2020+. Constructions, materials and installations; 7-27
9788365596703
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Municipally owned companies as executors of tasks pertaining to municipal waste management
Autorzy:
Famielec, Józefa
Famielec, Stanisław Jakub
Powiązania:
https://bibliotekanauki.pl/articles/973413.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Ekonomiczny w Krakowie, Małopolska Szkoła Administracji Publicznej
Tematy:
Municipal waste
municipally owned company
MOC
municipal waste installations
waste management
in-house orders
Opis:
Objectives: Services provided in the general economic interest constitute a fairly significant research field with regard to public management, involving different local governing tasks, including municipal waste management. Full management of municipal waste services is carried out by individual municipalities (from July 2013 onwards), therefore the purpose of the article is pinpointing the municipal waste management providers (Municipally Owned Companies) in Polish provincial cities, including those using the in-house model. Research Design & Methods: The process of identifying the entities engaged in waste management as municipally owned companies (referred hereafter as “MOCs”) is preceded by a theoretical analysis of the peculiarities of municipal waste and municipal waste management, both of which are regarded as crucial and having imminent economic and social consequences. During that theoretical analysis the authors applied the European Union hierarchy on waste management in establishing the following waste management criteria: achieving of a specified rate of recovery and recycling; standardisation of the magnitude and structure of waste flows directed to incineration plants and landfill; and comprehensiveness of the waste management system. Findings: It has been established that MOCs (including those operating via in-house orders) are the principal type of entities which provide municipal waste management services in the cities included in the analysis. Implications / Recommendations: The article shows a clear need for further research on the efficiency of MOCs regarding the provision and performance of public utility services and tasks. Contribution / Value Added: The conducted research provides evidence supporting the statement that municipal waste management is performed mostly by MOCs, which are entrusted with public utility tasks through tender procedures or, more frequently, via in-house orders. Such entities co-operate with the private sector, with private sector firms often owning specialised installations.
Źródło:
Zarządzanie Publiczne / Public Governance; 2018, 4(46); 65-77
1898-3529
2658-1116
Pojawia się w:
Zarządzanie Publiczne / Public Governance
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Instalacje fotowoltaiczne jako przykład uzasadnionej ekonomicznie działalności prosumenckiej
Photovoltaic installations as the example of economically justified prosumer operations
Autorzy:
Szałata, Ł.
Siedlecka, A.
Lejkowski, C.
Powiązania:
https://bibliotekanauki.pl/articles/96388.pdf
Data publikacji:
2016
Wydawca:
Fundacja Ekonomistów Środowiska i Zasobów Naturalnych
Tematy:
fotowoltaika
energia słoneczna
prosumer
photovoltaics
solar energy
Opis:
Niniejsze opracowanie przedstawia korzyści możliwe do uzyskania przez użytkowników instalacji fotowoltaicznych w kontekście działalności prosumenckiej i ma na celu analizę zasadności montażu ogniw.
Photovoltaic installations are the example of renewable energy sources which use solar energy. The analysis of an application of the photovoltaic installation which had been prepared for the real enterprise in Lubin was presented, as the example of an effective value of energy which could be obtained. Also, the distribution of costs and benefits was estimated. The installation of photovoltaics is one of the ways to join prosumer energetics which is supported, among others, by activities 3.1 and 3.2 in the Regional Operational Programme for the Lower Silesian Voivodeship and by the National Fund for Environmental Protection and Water Management.
Źródło:
Ekonomia i Środowisko; 2016, 2; 190-205
0867-8898
Pojawia się w:
Ekonomia i Środowisko
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozwiązania instalacji biogazowych dla gospodarstw rodzinnych
Innovative solutions of biogas installations for the agricultural family farms
Autorzy:
Romaniuk, W.
Biskupska, K.
Powiązania:
https://bibliotekanauki.pl/articles/239205.pdf
Data publikacji:
2012
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
biogaz
instalacja
energia
postęp
technologia
biogas
installation
energy
generation
technology
progress
Opis:
Rozproszony system rodzinnych gospodarstw rolnych, specjalizujących się w produkcji zwierzęcej, stwarza potrzebę w zakresie opracowania instalacji biogazowych o mocy poniżej 200 kW. Wynika to z potrzeby zagospodarowania energii na własne cele produkcyjne i ewentualnie dla grupy producentów rolnych. Taką potrzebę sygnalizuje się także w literaturze, w pracach prognostycznych. W związku z istniejącą sytuacją można sformułować problem badawczy, który wyrażono w postaci następującego pytania: Czy można zaproponować koncepcję projektu biogazowni na nawozy stałe (obornik) i substraty roślinne dla gospodarstw rodzinnych? Celem opracowania jest przedstawienie wyników badań energetycznych biogazowni o całkowitej pojemności bioreaktora ok. 400 m3 z agregatem prądotwórczym o mocy 35 kW oraz przedstawienie koncepcji projektu instalacji biogazowej na potrzeby gospodarstw rodzinnych i grup producentów rolnych.
Dispersed system of agricultural family farms specialized in livestock production, creates a necessity to design the biogas installations of capacity below 200 kW. That ensues from the need of necessary managing energy for their own production purposes and possibly to a group of agricultural producers. Such a need is suggested also by rewieved literature and prognostic studies. In connection with existing situation, the research problem nay be formulated as the following question: is it possible to propose the conceptual project of a biogas plant supplied with the solid fertilizers (manure) and plant substrates, provided for the family farms? This paper aimed to describe the energetic study results of a biogas installation with total bioreactor capacity 400 m3 and generator power of 35 kW, as well as to present the conceptual project of biogas plant for the family farms and groups of agricultural producers.
Źródło:
Problemy Inżynierii Rolniczej; 2012, R. 20, nr 2, 2; 149-159
1231-0093
Pojawia się w:
Problemy Inżynierii Rolniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Economy and energy analysis in the operation of renewable energy installations – a case study
Autorzy:
Idzikowski, Adam
Cierlicki, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/1839542.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
panel fotowoltaiczny
odnawialne źródła energii
falownik
solar panel
renewable sources of energy
inverter
Opis:
In the paper an economic, ecological and energy analysis of a home photovoltaic on grid installation was presented. The increase in ecological awareness of the Polish society contributes to the continuous growth of interest in green energy. However, many people haven’t been aware of the ecological, economic and energy benefits of photovoltaic installations yet, so the following analysis is made. The analysis concerns a photovoltaic installation with a capacity of 3.96 kWp located in Ościęciny near Włocławek. The photovoltaic installation consists of 11 monocrystalline panels with a power of 360 Wp, a 4 KTLM Sofar Solar inverter and other necessary components. The first part presents basic issues related to photovoltaic installations. Parameters related to the proper functioning of the photovoltaic installation were replaced. The analysis of the literature will help to understand the essence of the proper functioning of the photovoltaic installation. In the practical part, an analysis of a selected home photovoltaic installation was carried out. Based on the available data, it has been calculated that the installation will have a payback period of over 9 years. The photovoltaic installation will produce approximately 3 582.61 kWh of electricity and will contribute to the reduction of 70 tons of carbon dioxide during the entire operation.
Źródło:
Production Engineering Archives; 2021, 27, 2; 90-99
2353-5156
2353-7779
Pojawia się w:
Production Engineering Archives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Methods of energy efficiency improvement by modernisation of hydraulic installations at a fishing cutter at the baltic sea
Autorzy:
Szczepanek, M.
Barta, D.
Michalska-Pożoga, I.
Powiązania:
https://bibliotekanauki.pl/articles/27315958.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
fishing cutter
hydraulic installation
energy efficiency
Opis:
The Energy Efficiency Design Index (EEDI) became mandatory for new ships as well as the Ship Energy Efficiency Management Plan (SEEMP) for all ships due to the MEPC 62 (July 2011) along with the adoption of amendments to MARPOL Annex VI by the Parties to the MARPOL Annex VI. This was the first legally binding climate change treaty to be adopted since the Kyoto Protocol. The Ship Energy Efficiency Management Plan (SEEMP), which has been obligatory since 2013, did not to cover fishing cutters but triggered the implementation of energy efficiency audits due to fishing limits, high fuel prices, and free freight market. All the above caused that ship-owners started seeking ways for saving money and keep their business profitable. Apart from energy recovery installations, fishing vessels have been furnished with the latest technologies aimed at the reduction of energy consumption and at making ships greener. A research team of the Maritime University of Szczecin conducted energy efficiency audits on several fishing vessels operated on the Baltic Sea and stated that up to 40% of the energy is used during fishing operations by hydraulic devices installed at the fishing vessels. The paper presents the measurement results of energy consumption in typical operational states based on a selected fishing cutter operating at the Baltic Sea. The paper includes also the recommendations in terms modernization of hydraulic installations and the changes of control methods for devices with hydraulic drive. The calculations are also presented herein and they prove that it is possible to reduce energy consumption by a fishing cutter even by 20% while maintaining the unchanged operating parameters of the hydraulic devices.
Źródło:
New Trends in Production Engineering; 2018, 1, 1; 561-566
2545-2843
Pojawia się w:
New Trends in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Intelligent buildings and automatic control
Autorzy:
Bullejos Martín, David
Powiązania:
https://bibliotekanauki.pl/chapters/31026866.pdf
Data publikacji:
2019
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
monitoring
control mode
automatic control
energy management
gardening
security
Opis:
Automation systems can be classified according to an array of criteria, which includes length, complexity, application and integration. The application of these systems to the field of habitability defines a specific use of equal or greater complexity to industrial automation. The integration of automation and control systems into buildings improves its operating characteristics, providing them with better services and operations easy to use.
Źródło:
Buildings 2020+. Constructions, materials and installations; 153-167
9788365596703
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technologie magazynowania energii stosowane w instalacjach odnawialnych źródeł energii
Energy storage technologies used in installations of renewable energy sources
Autorzy:
Kozioł, M.
Nagi, Ł
Powiązania:
https://bibliotekanauki.pl/articles/377483.pdf
Data publikacji:
2018
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
magazynowanie energii
odnawialne źródła energii
elektrownie fotowoltaiczne
elektrownie wiatrowe
Opis:
W artykule dokonano przeglądu obecnie dostępnych technologii budowy systemów magazynowania energii elektrycznej, wytworzonej w odnawialnych źródłach energii takich jak elektrownie fotowoltaiczne i elektrownie wiatrowe. Omówiono najważniejsze parametry urządzeń magazynujących, oraz przeanalizowano ich charakterystykę pracy. Przedstawiono podstawowe zasady doboru urządzeń magazynujących dla odnawialnych źródeł energii.
The article reviews the currently available technologies for the construction of electricity storage systems, produced in renewable energy sources such as photovoltaic power plants and wind farms. The most important parameters of storage devices were discussed, and their work characteristics were analyzed. Basic principles for the selection of storage devices for renewable energy sources are presented.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2018, 94; 245-254
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cyberbezpieczeństwo przemysłowych systemów sterowania
Cybersecurity of industrial control systems
Autorzy:
Borysiewicz, M. J.
Michalik, J. S.
Powiązania:
https://bibliotekanauki.pl/articles/180865.pdf
Data publikacji:
2007
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
instalacje chemiczne
bezpieczeństwo systemów komputerowych
przemysłowe systemy sterowania
chemical installations
security of computer system
industrial control system
Opis:
Jednym z istotnych zagadnień zarządzania bezpieczeństwem instalacji chemicznych w aspekcie ochrony przed działaniami terrorystycznymi i sabotażowymi jest zapewnienie cyberbezpieczeństwa systemów informatycznych wykorzystujących sieci komputerowe. W artykule przedstawiono informacje o opracowaniach zawierających wytyczne i zalecenia dotyczące cyberbezpieczeństwa, omówiono zasady cyberbezpieczeństwa w odniesieniu do przemysłowych systemów sterowania (ICS - Industrial Control Systems), w szczególności zagadnienia stosowania systemowego profilu ochrony (SPP). Ważnym instrumentem oceny i zapewnienia bezpieczeństwa ICS jest metodyka STOE (System Target of Evaluation - systemowy obiekt oceny). Przedstawiono zakres STOE, rodzaje podatności i zabezpieczeń oraz założenia dotyczące bezpiecznego użytkowania ICS.
Assurance of cybersecurity of informatics systems using computer networks is an important aim of chemical installations safety management in the context of protection against terrorist or sabotage acts. The article presents and discusses information on published documents containing the guidelines and recommendations concerning cybersecurity, and the principles of cybersecurity of the Industrial Control Systems (ICSs), especially application of the System Protection Profile (SPP). Also discussed is the System Target of Evaluation method (STOE), a very important tool for assessing assuring ICS's security, its scope, vulnerabilities, protection measures as well as the assumptions for secure use of ICSs.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2007, 10; 8-11
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Eksploatacja i modernizacja systemów sterowania ruchem kolejowym
Operation and Modernization of the Railway Safety Installations
Autorzy:
Surma, S.
Młyńczak, J.
Powiązania:
https://bibliotekanauki.pl/articles/215430.pdf
Data publikacji:
2014
Wydawca:
Instytut Kolejnictwa
Tematy:
sterowanie ruchem kolejowym
niezawodność
naprawa
zapasy
railway safety installation
PLC Controllers
safety policy
Opis:
Artykuł dotyczy tworzenia i utrzymywania stanów magazynowych, pozwalających na maksymalizację gotowości systemu sterowania ruchem kolejowym. Skupiono się na systemie sterowania ruchem kolejowym zbudowanym ze sterowników PLC i elementów elektronicznych. Omówiono zarówno problematykę uzależnienia zapasów od intensywności uszkodzeń podzespołów, jak i czasu dostarczenia części zamiennych. Zwrócono również uwagę na konieczność zmiany podejścia personelu do polityki bezpieczeństwa przez podniesienie świadomości zagrożeń cyberprzestępczością.
The paper takes up the question of forming and maintaining stocks necessary to guaranty maximum operational readiness of safety installation. Attention was focused on the safety installation system consisting of Programmable Logic Controllers (PLC) and electronic components. Issues relevant to the interrelationship between necessary stores and the rate of component damages as well as delivery time of spare parts were raised. The Authors have also emphasized the need for changing the attitudes of the staff towards safety policies through improvement in awareness of the threats arising out of the cyber-crime.
Źródło:
Problemy Kolejnictwa; 2014, 163; 91-99
0552-2145
2544-9451
Pojawia się w:
Problemy Kolejnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oddziaływanie infrastruktury przesyłowej na przestrzeń rolniczą
Impacts of the transmission infrastructure on the agricultural space
Autorzy:
Sajnóg, N.
Sobolewska-Mikulska, K.
Powiązania:
https://bibliotekanauki.pl/articles/101456.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
infrastruktura przesyłowa
urządzenie przesyłowe
przestrzeń rolnicza
transmission infrastructure
transmission installations
agricultural space
Opis:
Charakterystyczną cechą infrastruktury przesyłowej jest jej przebieg przez bardzo dużą liczbę nieruchomości charakteryzujących się różnorodnym statusem ochronnym (grunty rolne i leśne, obszary Natura 2000, parki narodowe i krajobrazowe, grunty zabytkowe, tereny zurbanizowane, grunty zagrożone powodziami). Biorąc pod uwagę powyższe oraz uwzględniając fakt, że grunty rolne i leśne w Polsce stanowią ok 91% powierzchni kraju, a sieć Natura 2000 pokrywa ok. 20% jej powierzchni lądowej, należy stwierdzić, że skala wpływu urządzeń przesyłowych na przestrzeń rolniczą jest bardzo duża. Celem niniejszego artykułu jest analiza oddziaływania linii elektroenergetycznych wysokich i najwyższych napięć na przestrzeń rolniczą, na etapie fazy realizacji inwestycji oraz eksploatacji urządzenia przesyłowego.
The characteristic feature of the transmission infrastructure is its course over numerous properties of diversified protection status (arable lands, forest lands, Natura 2000 sites, national and landscape parks, his torical areas, urban areas, areas threatened by floods). Considering this, as well as the fact that in Poland arable and forest lands cover about 91% of the entire country, and the Natura 2000 network covers about 20% of lands, it should be stated that the level of impacts of transmission installations on the agricultural space is considerably high. The objective of this paper is to analyse impacts of power lines (of high and very high voltages) on the agricultural space at the stage of investments implementation and exploitation of transmission installations.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2017, I/1; 119-128
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ wiatru i śniegu na instalacje fotowoltaiczne w Polsce
The impact of wind and snow on photovoltaic installations in Poland
Autorzy:
Głuchy, D.
Kurz, D.
Trzmiel, G.
Powiązania:
https://bibliotekanauki.pl/articles/377311.pdf
Data publikacji:
2013
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
instalacje fotowoltaiczne
obciążenie wiatrem
obciążenie śniegiem
Opis:
W pracy przedstawiono sposób i zasady wyznaczania obciążenia wiatrem i śniegiem instalacji fotowoltaicznych tradycyjnych (naziemnych i nadachowych) oraz zintegrowanych z budynkiem. Zwrócono również uwagę na problem zalegającego śniegu i jego usuwania. Przytoczono odpowiednie normy, zgodnie z którymi Polska została podzielona na kilka stref w zależności od dopuszczalnego obciążenia wiatrem i śniegiem.
The paper presents a method and rules for determining wind and loads of traditional photovoltaic installations (ground and above roofing) and integrated with the building. It also drew attention to the problem of lying snow and its removal. Quoted the relevant standards, according to which Poland was divided into several zones, depending on the allowable wind loads and snow.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2013, 74; 253-260
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modernization of existing buildings
Autorzy:
Krawczyk, Dorota Anna
Sadowska, Beata
Powiązania:
https://bibliotekanauki.pl/chapters/31028290.pdf
Data publikacji:
2019
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
existing buildings
renovation market
modernization
materials
energy consumption
Opis:
New buildings are constructed to demanding energy performance levels set by national legislation, therefore existing buildings require improvements in their envelops and systems to decrease energy consumption.
Źródło:
Buildings 2020+. Constructions, materials and installations; 107-129
9788365596703
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies