Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "conductivity" wg kryterium: Wszystkie pola


Tytuł:
Studies on development of an electrothermal method of measuring the soil thermal conductivity
Autorzy:
Stawicki, J.
Opydo, W.
Powiązania:
https://bibliotekanauki.pl/articles/97718.pdf
Data publikacji:
2012
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
thermal conductivity
soil thermal conductivity
Statistica
Opis:
The paper presents the studies on development of a simplified electrothermal method of measuring the soil thermal conductivity, that may be used directly in the field. A measurement system has been designed and built, that is connected to measuring sensors located in the examined soil. Two types of sensors, i.e. active and passive ones were used. The passive sensors were provided with thermistors used for temperature measurement, while the active one, apart from the thermistor, was provided with a heating element of resistance type. The study has shown that the proposed method, consisting in measuring the steady heat conduction between the measuring sensor and soil, allows to determine the value of the soil thermal conductivity with satisfying accuracy. Moreover, the method is conducive to significantly smaller disturbance of the soil structure, being a reason of measurement errors occurring while using traditional methods. Mathematical processing of the research results has been carried out with the help of STATISTICA software.
Źródło:
Computer Applications in Electrical Engineering; 2012, 10; 118-126
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical calculation of 1D ZRP chain electrical conductivity
Autorzy:
Botman, S.
Powiązania:
https://bibliotekanauki.pl/articles/1940699.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska
Tematy:
conductivity
kinetic equation
numerical computation
Opis:
In this paper we present a numerical procedure for calculation of electrical conductivity in a periodic lattice of one-dimensional zero range potentials with a case of dominant impurity scattering. The conductivity was previously obtained in an integral form via an approximate solution of the kinetic Kolmogorov equation. The proposed approach is based on the quadrature formula for certain type of integrals. The results are compared with the low temperature limit approximation.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2017, 21, 2; 185-192
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Calculating effective conductivity of heterogeneous soils by homogenization
Autorzy:
Szymkiewicz, A.
Powiązania:
https://bibliotekanauki.pl/articles/241053.pdf
Data publikacji:
2005
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
effective conductivity
soil heterogeneity
groundwater flow
homogenization
Opis:
The paper concerns effective conductivity of a heterogeneous soil composed of two materials characterized by different hydraulic conductivities. According to the homogenization theory the effective conductivity is obtained from the solution of an elliptic equation for a single representative elementary volume. A numerical algorithm to solve this equation is described. Examples of calculations for periodic media with inclusions of various shapes are presented. Influence of volumetric fraction, arrangement, continuity and conductivity ratio of the two materials on the effective conductivity is investigated. Numerical results are compared with some analytical estimations available in the literature.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2005, 52, 2; 111-130
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal conductivity of food products
Przewodność cieplna produktów spożywczych
Autorzy:
Aerlichman, V.N.
Fatychov, J.A.
Kukelka, L.
Kopec, A.
Powiązania:
https://bibliotekanauki.pl/articles/35494.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
food product
thermal conductivity
thermal diffusivity
thermal diffusivity coefficient
heat conductivity coefficient
Opis:
The presented work is focused on the food thermal characteristics calculation methods (heat conductivity coefficient and thermal diffusivity coefficient a). Thermal characteristics of food are important in food industry and define the intensiveness of technological processes of food refrigeration and thermal treatment, energy consumption for their realization and technological equipment production rate. They are also needed for the building and validation of mathematical models of heat transfer in food products which are useful in the design and optimisation of freezing, heating, cooking and cooling pro-cesses and equipment. It is not easy to define the food thermal characteristics. Difficulties arise from their heterogeneity, high labour consumption and complexity of experimental sets. Methods for experimental determination of heat conductivity coefficient and thermal diffusivity coefficient a based on the regular method mode require the α → ∞ condition, which is the case of high speed of the environment which flows around the test sample, as in the case of boiling or condensing. Using the method presented in this article it is possible to determine the heat conductivity and thermal diffusivity coefficient a even in the absence of the condition α → ∞.
W pracy opisano metodę pozwalającą na obliczeniowe wyznaczenie charakterystyk cieplnych produktów spożywczych – współczynnika przewodzenia ciepłaoraz współczynnika wyrównania temperatury (dyfuzyjności cieplnej) a. Współczynniki te wpływają na przebieg procesów obróbki termicznej produktów, a także na zużycie energii i produktywność urządzeń technologicznych. Znajomość tych współczynników jest konieczna do tworzenia modeli matematycznych wymiany ciepła w produktach spożywczych, użytecznych w projektowaniu i optymalizacji procesów i urządzeń do mrożenia, ogrzewania, gotowania czy schładzania produktów. Określenie właściwości cieplnych żywności nie jest łatwe. Trudności wynikają z różnorodności produktów spożywczych, pracochłonności i złożoności stanowisk badawczych. Sposoby eksperymentalnego wyznaczania ww. współczynników oparte na metodzie stanu uporządkowane-go wymagają spełnienia warunku α→∞, co ma miejsce w przypadku dużych prędkości środowiska omywającego badaną próbkę, przy gotowaniu lub kondensacji. Za pomocą przedstawionej w pracy metody możliwe jest wyznaczenie współczynnika przewodzenia ciepła i współczynnika dyfuzyjności cieplnej a nawet w przypadku braku spełnienia warunku α→∞.
Źródło:
Acta Agrophysica; 2014, 21, 2
1234-4125
Pojawia się w:
Acta Agrophysica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of methods for soil thermal conductivity calculations
Autorzy:
Usowicz, B.
Powiązania:
https://bibliotekanauki.pl/articles/26435.pdf
Data publikacji:
1995
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
high temperature
soil
calculation
thermal conductivity
Laplace transform method
Źródło:
International Agrophysics; 1995, 09, 2
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Error analysis of water conductivity coefficient measurement by instantaneous profiles method
Autorzy:
Slawinski, C.
Walczak, R.T.
Skierucha, W.
Powiązania:
https://bibliotekanauki.pl/articles/26183.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
conductivity coefficient
soil water
instantaneous profiles method
coefficient measurement
water conductivity
error analysis
water potential value
Źródło:
International Agrophysics; 2006, 20, 1
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Teploprovodnost’ penoplastov
Thermal conductivity of the foam plastics
Autorzy:
Kisieliov, I. A.
Powiązania:
https://bibliotekanauki.pl/articles/2065384.pdf
Data publikacji:
2014
Wydawca:
Politechnika Częstochowska
Tematy:
pianki
przewodność cieplna
temperatura
foam plastics
thermal conductivity
temperature
aging
Opis:
Poluceny sootnosenia opisyvauscie zavisimost’ teploprovodnosti penoplastov ot ego plotnosti, teploprovodnosti i plotnosti ego matricy, teploprovodnosti gaza v porach, diametra por i temperatury.
The relationships are obtained, which describe the dependence of the thermal conductivity of foam plastics on its density, thermal conductivity and density of its matrix, thermal conductivity of gas in its pores, the diameter of its pores and temperature.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2014, 2 (14); 16--22
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement of temperature-dependent viscosity and thermal conductivity of alumina and titania thermal oil nanofluids
Autorzy:
Cieśliński, J. T.
Ronewicz, K.
Smoleń, S.
Powiązania:
https://bibliotekanauki.pl/articles/240372.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanofluids
dynamic viscosity
thermal conductivity
electrical conductivity
nanopłyny
lepkość dynamiczna
przewodnictwo cieplne
przewodnictwo elektryczne
Opis:
In this study the results of simultaneous measurements of dynamic viscosity, thermal conductivity, electrical conductivity and pH of two nanofluids, i.e., thermal oil/Al2O3 and thermal oil/TiO2 are presented. Thermal oil is selected as a base liquid because of possible application in ORC systems as an intermediate heating agent. Nanoparticles were tested at the concentration of 0.1%, 1%, and 5% by weight within temperature range from 20°C to 60°C. Measurement devices were carefully calibrated by comparison obtained results for pure base liquid (thermal oil) with manufacturer’s data. The results obtained for tested nanofluids were compared with predictions made by use of existing models for liquid/solid particles mixtures.
Źródło:
Archives of Thermodynamics; 2015, 36, 4; 35-47
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of genetic algorithms for the estimation of hydraulic conductivity
Autorzy:
Bartlewska-Urban, M.
Strzelecki, T.
Powiązania:
https://bibliotekanauki.pl/articles/178471.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
genetic algorithms
hydraulic conductivity
Biot consolidation model
Opis:
In the study described here model calibration was performed employing the inverse analysis using genetic algorithms (GA). The objective of analysis is to determine value of the coefficient of hydraulic conductivity, k. The commonly used method for the determination of coefficient of hydraulic conductivity based on Terzaghi consolidation leads to an underestimation of the value of k as the Terzaghi model does not take into account the deformation of soil skeleton. Here, an alternative methodology based on genetic algorithms is presented for the determination of the basic parameters of Biot consolidation model. It has been demonstrated that genetic algorithms are a highly effective tool enabling automatic calibration based on simple rules. The values of the coefficient of hydraulic conductivity obtained with GA are of at least one order smaller than values obtained with the Terzaghi model.
Źródło:
Studia Geotechnica et Mechanica; 2018, 40, 2; 140-146
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of AC field distribution on impedance of the conductivity cell
Autorzy:
Mikhal, A. A.
Warsza, Z. L.
Powiązania:
https://bibliotekanauki.pl/articles/114302.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
measurement
electrolytic conductivity
electrical field
error
Opis:
The АС impedance model of a liquid conductivity has been developed to assess the influence of electromagnetic vector potential. It has been proved that the field in a liquid conductor is quasi-static. Approximation error, even taken for very concentrated solutions (e.g. sea water), does not exceed 0.01 ppm. The calculation of resistance of the four-electrode cell is given with the account of Ampere's circuit law. Two types of errors are defined: DC error due to finite thickness of electrodes, and AC error due to presence of displacement currents when using an impedance model.
Źródło:
Measurement Automation Monitoring; 2015, 61, 11; 521-525
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Molecular dynamics simulations of thermal conductivity of penta-graphene
Autorzy:
Muna, Isyna
Winczewski, Szymon
Powiązania:
https://bibliotekanauki.pl/articles/1954605.pdf
Data publikacji:
2020
Wydawca:
Politechnika Gdańska
Tematy:
penta-graphene
thermal conductivity
molecular dynamics
grafen
przewodnictwo cieplne
dynamika molekularna
Opis:
The thermal conductivity of penta-graphene (PG), a new two dimensional carbon allotrope and its dependence on temperature, strain, and direction are studied in this paper. The thermal conductivity of PG is investigated using a non-equilibrium molecular dynamics simulation (NEMD) with the Two Region Method by applying the optimized Tersoff interatomic potential. Our study shows that the thermal conductivity of PG (determined for the [100] direction) at the room temperature of 300 K is about 18.7 W/(m K), which is much lower than the thermal conductivity of graphene. As the temperature increases, the thermal conductivity of PG is decreasing because, unlike graphene, PG has lower phonon group velocities and few collective phonon excitations. The obtained dependence of the thermal conductivity on the temperature can be described as κ ∼ T −0.32. For the [110] direction the thermal conductivity at the room temperature of 300 K is very similar: about 17.8 W/(m K). In this case, the temperature dependence follows the κ ∼ T −0.3 relation. Our investigations reveal that the thermal conductivity of PG is isotropic, meaning that heat transport behavior is independent of the heat flow direction. Our results indicate that the thermal conductivity of PG depends in an interesting way on the applied strain: nonmonotonic up-and-down behavior is observed. The thermal conductivity increases between strains from 0% up to 12.5%, and it decreases above a strain of 12.5%. Our investigation highlights the fascinating thermal transport properties of penta-graphene. The ultra-low thermal conductivity, the decreasing thermal conductivity with the increasing temperature, and the ultra-high mechanical strength of PG show that PG possesses a great potential in thermoelectric and nanomechanics applications. We hope that these findings, made by means of simulations, will become a bridge to inspire and encourage the experimental works, especially in the synthesis of PG.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2020, 24, 3; 191-220
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System pomiaru przewodności cieplnej
Thermal conductivity measurement system
Autorzy:
Stencel, M.
Osiński, D.
Powiązania:
https://bibliotekanauki.pl/articles/155236.pdf
Data publikacji:
2007
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
przewodność cieplna
przyrząd wirtualny
system pomiarowy
thermal conductivity
virtual instrument
measurement system
Opis:
Przewodność cieplna metalu jest jednym z ważniejszych parametrów określających jego właściwości metalurgiczne. W pracy przedstawiono automatyczny system pomiaru przewodności cieplnej metali. W systemie wykorzystano oryginalną [2], niestacjonarną metodę pomiaru przewodności cieplnej. Wymuszenie sygnału temperatury w próbce dokonywane jest za pomocą lampy łukowej o regulowanej mocy oraz zespołu luster. Pomiar temperatury na podstawie którego dokonuje się wyznaczenia wartości przewodności cieplnej dokonywany jest za pomocą termopar typu K. Poza wymienionymi elementami system pomiarowy zawiera układ kondycjonowania i transmisji danych firmy National Instruments. W pracy przedstawiono także wyniki eksperymentów pomiarowych potwierdzające poprawną pracę systemu.
Thermal conductivity of metal is one of the most significant parameters characterizing its metallurgical properties. The paper describes automatic measurement system destined to thermal conductivity measurements. Such system implements a new original nonstationary method of conductivity determination. The system consists of thermocouple type K, conditioning and transmitting modules: FP-TC 120 and FP 1000 series FieldPoint of National Instruments. It was integrated by LabView environment of NI. Apart of description of system the paper includes results of its test and measurement experiments.
Źródło:
Pomiary Automatyka Kontrola; 2007, R. 53, nr 9 bis, 9 bis; 601-604
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of air humidity and temperature on thermal conductivity of wood-based materials
Autorzy:
Trochonowicz, Maciej
Galas, Monika
Powiązania:
https://bibliotekanauki.pl/articles/390811.pdf
Data publikacji:
2018
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
wood-based materials
thermal conductivity coefficient
thermal insulation
Opis:
The aim of this paper is to approximate the issues related to the influence of air humidity and test temperature on the thermal conductivity coefficient λ of wood-based materials. During the laboratory tests, the λ coefficient was determined depending on the test temperature and air humidity, material density and sorption were also tested
Źródło:
Budownictwo i Architektura; 2018, 17, 4; 77-86
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of the Thermal Conductivity Coefficient in the Heat Conduction Model with Fractional Derivative
Autorzy:
Brociek, R.
Słota, D.
Powiązania:
https://bibliotekanauki.pl/articles/382791.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat conduction equation
thermal conductivity coefficient
inverse problem
fractional derivative
thermal conductivity
model przewodzenia ciepła
współczynnik przewodzenia ciepła
problem odwrotny
pochodna ułamkowa
przewodność termiczna
Opis:
Main goal of the paper is to present the algorithm serving to solve the heat conduction inverse problem. Authors consider the heat conduction equation with the Riemann-Liouville fractional derivative and with the second and third kind boundary conditions. This type of model with fractional derivative can be used for modelling the heat conduction in porous media. Authors deal with the heat conduction inverse problem, which, in this case, consists in identifying an unknown thermal conductivity coefficient. Measurements of temperature, in selected point of the region, are the input data for investigated inverse problem. Basing on this information, a functional describing the error of approximate solution is created. Minimizing of this functional is necessary to solve the inverse problem. In the presented approach the Ant Colony Optimization (ACO) algorithm is used for minimization.
Źródło:
Archives of Foundry Engineering; 2019, 3; 38-42
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determining bulk electrical conductivity of soil from attenuation of electromagnetic pulse
Autorzy:
Malicki, M.A.
Kokot, J.
Skierucha, W.M.
Powiązania:
https://bibliotekanauki.pl/articles/26177.pdf
Data publikacji:
1998
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
electromagnetic pulse
electrical conductivity
soil
soil salinity
Źródło:
International Agrophysics; 1998, 12, 3
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laboratory device to analyse the impact of soil properties on electrical and thermal conductivity
Autorzy:
Bertermann, David
Schwarz, Hans
Powiązania:
https://bibliotekanauki.pl/articles/972746.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
electrical resistivity
thermal conductivity
soil
properties
wenner array
Opis:
Gathering information about soil properties in an efficient way is essential for many soil applications also for very shallow geothermal systems (e.g. collector systems or heat baskets). In the field, electrical resistivity tomogramphy measurements enable non-invasive and extensive analyses regarding the determination of soil properties. For a better understanding of measured electrical resistivity values in relation to soil properties within this study, a laboratory setup was developed. The structure of this laboratory setup is geared to gather electrical resistivity or rather electrical conductivity values which are directly comparable to data measured in the field. Within this setup grain size distribution, moisture content, and bulk density, which are the most important soil parameters affecting the electrical resistivity, can be adjusted. In terms of a better estimation of the geothermal capability of soil, thermal conductivity measurements were also implemented within the laboratory test sequence. The generated data reveals the serious influence of the water content and also provides a huge impact of the bulk density on the electrical as well as on the thermal conductivity. Furthermore, different behaviour patterns of electrical and thermal conductivity in their particular relation to the different soil parameters could be identified.
Źródło:
International Agrophysics; 2017, 31, 2
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Теплопроводность пенопластов
Współczynnik przewodzenia ciepła styropianów
Thermal conductivity of the foam plastics
Autorzy:
Kiselev, I. A.
Powiązania:
https://bibliotekanauki.pl/articles/2068508.pdf
Data publikacji:
2015
Wydawca:
Politechnika Częstochowska
Tematy:
styropian
współczynnik przewodzenia ciepła
temperatura
starzenie
foam plastics
thermal conductivity
temperature
aging
Opis:
Uzyskano zależność, która opisuje powiązanie pomiędzy współczynnikiem przewodzenia ciepła a jego gęstością, ilością gazu w porach, średnicą porów i temperaturą.
The relationships are obtained, which describe the interdependence between thermal conductivity of foam plastics and its density, thermal conductivity and density of its matrix, thermal conductivity of gas in its pores, the diameter of its pores and temperature.
Źródło:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo; 2015, 21 (171); 85--90
0860-7214
Pojawia się w:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Novel Method of Thermal Conductivity Measurement Using Stefan-Boltzmann Law
Autorzy:
Leśniewski, W.
Czekaj, E.
Wieliczko, P.
Wawrylak, M.
Powiązania:
https://bibliotekanauki.pl/articles/356312.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermal conductivity
thermal radiation
ceramic shell mold
aluminum casting
Opis:
The article presents a novel method that allows measurement of thermal conductivity that is based on Stefan-Boltzmann law. The developed method can be used to determine thermal conductivity of ceramic investment casting molds. The methodology for conducting thermal conductivity tests of ceramic material samples is presented. Knowledge of the value of thermal capacity and thermal conductivity as a function of temperature enables computer simulations of the process of cooling and solidification of liquid metal in a mold.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 1; 311-315
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
O przewodności cieplnej meteorytu Jezersko
The thermal conductivity of the Jezersko meteorite
Autorzy:
Szurgot, Marian A.
Powiązania:
https://bibliotekanauki.pl/articles/2145826.pdf
Data publikacji:
2021
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
meteoryt Jezersko
chondryty zwyczajne
przewodność cieplna
Jezersko meteorite
ordinary chondrites
thermal conductivity
Opis:
Praca prezentuje wyniki przewidywań teoretycznych przewodności cieplnej (K) meteorytu Jezersko, sklasyfikowanego jako chondryt zwyczajny H4. Przewidywania oparto na wybranych modelach skał i różnych zależnościach teoretycznych i empirycznych. Wykorzystano skład modalny chondrytu Jezersko ustalony przez autora oraz literaturowe dane o przewodności cieplnej minerałów składowych meteorytu i jego porowatości (P). Stosując wymienione metody, określono przewodność cieplną szkieletu ziarnowego meteorytu i jego globalną przewodność cieplną, wykorzystując także przewidywane wartości dyfuzyjności cieplnej (D). Wyniki potwierdzają znane prawidłowości dotyczące skał ziemskich i meteorytów, że współczynnik porowatości skały i materia wypełniająca pory silnie wpływają na przewodność cieplną. Model średniej geometrycznej przewiduje dla szkieletu ziarnowego meteorytu Jezersko wartość przewodności cieplnej 4,35 W m−1 K−1, a średnia z dwóch modeli warstwowych: modelu średniej harmonicznej i modelu średniej arytmetycznej wartość 4,9 W m−1 K−1 dla temperatury 300 K. Globalna przewodność cieplna meteorytu Jezersko (K) według modelu średniej geometrycznej w temperaturze 300 K wynosi 2,6 W m−1 K−1 dla ciśnienia powietrza 1 atm, a 1,0 W m−1 K−1 dla próżni. Model Hashina–Shtrikmana przewiduje wartości K: 2,4 W m−1 K−1 i 1,9 W m−1 K−1, model Clausiusa–Mossottiego – wartości: 2,2 W m−1 K−1 i 1,9 W m−1 K−1, natomiast modele warstwowe skał – wartości: 2,1 W m−1 K−1 i 2,0 W m−1 K−1 dla temperatury 300 K i powietrza pod ciśnieniem 1 atm oraz dla próżni. Zależność pomiędzy przewodnością cieplną i porowatością wskazuje średnią wartość K dla meteorytu Jezersko dla próżni: 1,18 W m−1 K−1, a zależność pomiędzy przewodnością cieplną i dyfuzyjnością cieplną wskazuje wartość K: 1,12 W m−1 K−1 dla zakresu 200–300 K dla próżni, a w przypadku powietrza pod ciśnieniem normalnym wartość: 2,57 W m−1 K−1. Średnia wartość przewodności cieplnej chondrytu Jezersko dla wszystkich przewidywań wynosi w przypadku temperatury ~300 K i ciśnienia powietrza 1 atm: 2,45 ± 0,30 W m−1 K−1, a w przedziale temperatur 200–300 K i próżni: 1,40 ± 0,40 W m−1 K−1. Przewidywane wartości globalnej przewodności cieplnej meteorytu Jezersko dla powietrza i próżni są w zakresie wartości ostatnio prezentowanych przez Soini i in. (2020) dla grupy H4 chondrytów zwyczajnych: 2,8 ± 0,6 W m−1 K−1, wartość średnia K przy wypełnieniu porów przez powietrze pod ciśnieniem 1 atm, oraz 1,9 ± 1,0 W m−1 K−1, wartość średnia K dla zakresu temperatur: 200–300 K, gdy ośrodkiem wypełniającym pory jest próżnia.
The thermal conductivity (K) of Jezersko H4 meteorite was predicted by various models of rocks, using literature data on the chemical composition, porosity (P), and by relationships between thermal conductivity and porosity, and between thermal conductivity and thermal diffusivity (D). The results confirm that the porosity of the chondrite and air pressure significantly affect thermal conductivity. The thermal conductivity of the chondrite skeleton/matrix predicted by the modal composition of the meteorite and by the geometric mean model is equal to 4.35 W m−1 K−1, and by arithmetic and harmonic mean models: 4.9 W m−1 K−1at 300 K. Bulk thermal conductivity of the meteorite predicted by the geometric mean model is equal to 2.6 W m-1 K-1 for air pressure of 1 atm, and 1.0 W m−1 K−1in vacuum at 300 K. The Hashin–Shtrikman model predicts the values: 2.4 and 1.9 W m−1 K−1, the Clausius–Mossotti model: 2.2 and 1.9 W m-1 K-1, and the mean of two-layer models: 2.1 and 2.0 W m−1 K−1 at 300 K, for air pressure of 1 atm, and in vacuum, respectively. The relationships between thermal conductivity and porosity based on experimental data for ordinary chondrites indicate a mean K value for bulk thermal conductivity of the Jezersko meteorite in vacuum: 1.18 W m−1 K−1, and between thermal conductivity and thermal diffusivity the mean value: 1.12 W m−1 K−1at 200–300 K. The mean value for all predictions for bulk thermal conductivity of the meteorite for air at 1 atm is equal to 2.45 ± 0.30 W m−1 K−1 (range: 2.0–2.9 W m−1 K−1) at 300 K, and in vacuum: 1.40 ± 0.40 W m−1 K−1 (range: 0.95–2.0 W m−1 K−1) at 200–300 K. Predicted values of bulk thermal conductivity of the Jezersko meteorite, for air and in vacuum, are in the range of values recently reported by Soini et al. (2020) for the H4 group of chondrites: 2.8 ± 0.6 W m−1 K−1, mean K for air at 1 atm, and 1.9 ± 1.0 W m−1 K−1 mean K value in vacuum at 200–300 K.
Źródło:
Nafta-Gaz; 2021, 77, 1; 10-19
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental evaluation of dynamic properties of the four electrode reference conductivity cells
Autorzy:
Mikhal, A. A.
Warsza, Z. L.
Gavrylkin, V. G.
Powiązania:
https://bibliotekanauki.pl/articles/114164.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
primary conductivity standard
cell dynamics
uncertainty
Opis:
Dynamic properties of the four-electrode cell with conducting liquid inside are described in the paper. The cell is used as a sensor of the electrolytic conductivity (EC) in the national Ukrainian standard. Electrical model and physical model for the temperature changes of this sensor are presented. To avoid additional measurement errors the stable state in desired temperature should be obtain. To obtain values of parameters describing the dynamic process of EC cell for temperature changes the experimental way was chosen. Installation and measurement procedure is presented. It is found that temperature transition process in the EC cell can be modeled by the first order differential equation and depends mainly on two cell tubes. For establishing the cell temperature within an error less then 0.002ºC time 36 min is needed.
Źródło:
Measurement Automation Monitoring; 2015, 61, 10; 456-459
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Lab-on-a-chip microdevice with contactless conductivity detector
Autorzy:
Blaszczyk, K.
Chudy, M.
Brzozka, Z.
Dybko, A.
Powiązania:
https://bibliotekanauki.pl/articles/221617.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
lab-on-a-chip
poly(dimethylsiloxane)
contactless conductivity
pseudoelectrodes
microfluidic
Opis:
This paper describes a new contactless conductivity detector, whose electrodes are constructed of microchannels filled with solution of KCl - called pseudoelectrodes. The lab-on-a-chip microdevice was fabricated in poly(dimethylsiloxane) PDMS, using a moulding technique. The mould was made from a dry negative photoresist with a thickness of 50 µm. During the tests, the dimension and arrangement of pseudoelectrodes' microchannels were evaluated. The analyte was pumped into the microchannel using a syringe pump with a flow rate of 50 µL/min. Reproducible changes of the signal were obtained.
Źródło:
Metrology and Measurement Systems; 2013, 20, 2; 299-306
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydraulic Conductivity and Porosity of Hardening Slurries with Fluidal Fly Ashes in Chemically Aggressive Environments
Autorzy:
Falaciński, P.
Kledyński, Z.
Powiązania:
https://bibliotekanauki.pl/articles/241022.pdf
Data publikacji:
2008
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
hardening slurry
fluidal ashes
cut-off walls
hydraulic conductivity
Opis:
The article presents the results of hydraulic conductivity and porosity tests of hardening slurries prepared from Portland cement, betonite, water and fluidal fly ashes from combustion of hard and brown coal. In addition, the ashes were in two states of activation: non-activated and mechanically activated. The slurries were exposed to persistent, 160-day filtration of chemically aggressive liquids: distilled water, 0.5% solution of nitric acid and 1% solution of sodium sulphate. A comparative base was composed of samples exposed to filtration of tap water. The research was into relations between hydraulic conductivity and parameters characterizing the porosity structures in slurries, as well as into the influence of sample maturation periods, the state of activation and type of ashes, and the type of aggressive medium on porosity and conductivity of the material. The observed phenomena were typical of materials based on cement binders, and exposed to chemical aggression, e.g. sealing-up of porosity structures in response to sulphate corrosion and de-sealing in response to leaching corrosion, along with effects specific for slurries, such as a decrease of hydraulic conductivity in response to nitric acid solution. A favourable effect of fluidal fly ashes from brown coal was also noted.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2008, 55, 3-4; 65-81
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Verification of the Van Genuchten method of determination of the hydraulic conductivity of peat soils
Autorzy:
Olszta, W.
Kowalski, D.
Powiązania:
https://bibliotekanauki.pl/articles/26149.pdf
Data publikacji:
1996
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
hydraulic conductivity
peat soil
soil water
van Genuchten method
Źródło:
International Agrophysics; 1996, 10, 2
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The electronic component of solid fluoride electrolytes
Składowa elektronowa stałych elektrolitów fluorkowych
Autorzy:
Palimąka, P.
Pietrzyk, S.
Powiązania:
https://bibliotekanauki.pl/articles/264147.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
aluminium electrolysis
electronic conductivity
electrical conductivity
elektroliza aluminium
przewodnictwo elektronowe
przewodnictwo elektryczne
Opis:
Solid electrolytes based on sodium cryolite are present in aluminium electrolysers as frozen crystals formed on the side walls of the carbon lining (side ledge). Their main task is to protect the lining from the effect of liquid electrolyte and ensure temperature stabilization during the process of electrolysis. On the other hand, being electrically conductive, they can reduce current efficiency. In this study, the value of the electronic component of the total conductivity of the solidified electrolytes of different compositions was determined. It was found that the highest electronic conductivity is exhibited by electrolytes containing both aluminium and calcium fluoride. However, the electronic component of the total conductivity is not high, as it only reaches 0.1–2.3 mS/cm. Its share in the total conductivity of the solid multi-component electrolytes varies and, depending on their composition, is within a range of 1–10%.
Stałe elektrolity na bazie kriolitu sodowego są obecne w elektrolizerach do produkcji aluminium jako wykrystalizowane na bocznych ścianach wyłożeniach węglowego garnisaże. Ich głównym zadaniem jest ochrona węglowego wyłożenia przed działaniem ciekłego elektrolitu i stabilizacja temperatury procesu elektrolizy. Z drugiej strony mogą być przyczyną spadku wydajności prądowej, gdyż przewodzą prąd elektryczny. W pracy wyznaczono wielkość składowej elektronowej całkowitego przewodnictwa zakrzepłych elektrolitów o różnym składzie. Stwierdzono, że najwyższe przewodnictwo elektronowe wykazują elektrolity zawierające jednocześnie fluorek glinu i wapnia. Składowa elektronowa całkowitego przewodnictwa nie jest jednak wysoka i osiąga wartości rzędu 0,1–2,3 mS/cm. Jej udział w całkowitym przewodnictwie stałych elektrolitów wieloskładnikowych waha się, w zależności od ich składów, od 1 do 10%.
Źródło:
Metallurgy and Foundry Engineering; 2016, 42, 3; 147-156
1230-2325
2300-8377
Pojawia się w:
Metallurgy and Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurements of a steel charge emissivity under strong irradiance conditions
Autorzy:
Benduch, A.
Wyczółkowski, R.
Powiązania:
https://bibliotekanauki.pl/articles/102336.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
porous charge
thermal radiation
thermal resistance
long elements bundles
effective thermal conductivity
radiative thermal conductivity
Opis:
Steel bars are manufactured in the rolling process, whereby they are characterized by strain hardening and poor plastic properties. In many application cases such properties are improper, therefore, additional heat treatment is required. Crucial influence on the products quality after heat treatment has an appropriate selection of process parameters. In many modern technologies of heat treatment the charge of porous structure is subjected to the heating process. Proper control of heat treatment parameters of bundles of rods requires knowledge on their thermal properties. However, it also requires accurate identification of complex heat transfer processes occurring in the porous material. Such analysis, with respect to bundles of bars, provide a response of qualitative nature of the heat exchange area of these charges. The article describes the emissivity measurements of samples of the steel charge using a thermal imaging camera.
Źródło:
Advances in Science and Technology. Research Journal; 2014, 8, 23; 19-25
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Soil moisture and bulk electrical conductivity variability measured by TDR
Autorzy:
Sobczuk, H.A.
Zhixiong, C.
Liuzong, Z.
Powiązania:
https://bibliotekanauki.pl/articles/24636.pdf
Data publikacji:
1996
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
variability
soil heterogeneity
electrical conductivity
soil water
measurement
soil moisture
water content
Źródło:
International Agrophysics; 1996, 10, 4
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrical Conductivity and Morphology Study of Polyaniline Powder Synthesised with Various Doping Ions
Autorzy:
Golba, S.
Popczyk, M.
Miga, S.
Jurek-Suliga, J.
Zubko, M.
Powiązania:
https://bibliotekanauki.pl/articles/351230.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
polyaniline
conductive polymers
conductivity
morphology
Opis:
Powdered polyaniline (PANI) was synthesised chemically with different doping anions namely hydrochloric acid, sulphuric acid and para-toluenesulfonic acid (pTSA). Two-step synthetic procedure was utilised at low temperature. The highest reaction efficiency was found for chlorine-doped PANI. Structural characterization with FTIR revealed the vibration bands characteristicto formation of the emeraldine salt. The surface morphology of doped PANIs was studied by SEM images which showed near globular shape and porous structures with different size of the aggregated particles. They were smaller for Cl-- or pTS--doped PANI while for SO4 2- the size was markedly larger. The XRD patterns revealed that there are ordered regions especially for pTS- doped PANI, while the highest conductivity value was recorded for Cl- doped one followed by organic pTS- doped and SO4 2- doped one.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 3; 1023-1028
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Variable thermal conductivity in micropolar thermoelastic medium without energy dissipation possessing cubic symmetry
Autorzy:
Ailawalia, Praveen
Priyanka
Powiązania:
https://bibliotekanauki.pl/articles/27312393.pdf
Data publikacji:
2023
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
transfer ciepła
mikrorotacja
temperatura
variable thermal conductivity
microrotation
temperature distribution
normal mode analysis
Opis:
This investigation deals with the effect of variable thermal conductivity in a micropolar thermoelastic medium without energy dissipation with cubic symmetry. The normal mode technique is employed for obtaining components of physical quantities such as displacement, stress, temperature distribution and microrotation.
Źródło:
International Journal of Applied Mechanics and Engineering; 2023, 28, 1; 1--10
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Water conductivity of Arctic zone soils (Spitsbergen)
Autorzy:
Witkowska-Walczak, B.
Slawinski, C.
Bartminski, P.
Melke, J.
Cymerman, J.
Powiązania:
https://bibliotekanauki.pl/articles/25209.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
water conductivity
soil
grain size
distribution
pore size
Arctic zone
Spitsbergen
Opis:
The water conductivity of arctic zone soils derived in different micro-relief forms was determined. The greatest water conductivity at the 0-5 cm depth for the higher values of water potentials (> -7 kJ m-3) was shown by tundra polygons (Brunic-Turbic Cryosol, Arenic) – 904-0.09 cm day-1, whereas the lowest were exhibited by Turbic Cryosols – 95-0.05 cm day-1. Between -16 and -100 kJ m-3, the water conductivity for tundra polygons rapidly decreased to 0.0001 cm day-1, whereas their decrease for the other forms was much lower and in consequence the values were 0.007, 0.04, and 0.01 cm day-1 for the mud boils (Turbic Cryosol (Siltic, Skeletic)), cell forms (Turbic Cryosol (Siltic, Skeletic)), and sorted circles (Turbic Cryosol (Skeletic)), respectively. In the 10-15 cm layer, the shape of water conducti-vity curves for the higher values of water potentials is nearly the same as for the upper layer. Similarly, the water conductivity is the highest – 0.2 cm day-1 for tundra polygons. For the lower water potentials, the differences in water conductivity increase to the decrease of soil water potential. At the lowest potential the water conductivity is the highest for sorted circles – 0.02 cm day-1 and the lowest in tundra polygons – 0.00002 cm day-1.
Źródło:
International Agrophysics; 2014, 28, 4
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie przewodności pneumatycznego modulatora ABS
Conductivity ivestigation of ABS pneumatic modulator
Autorzy:
Czaban, J.
Miatluk, M.
Powiązania:
https://bibliotekanauki.pl/articles/262912.pdf
Data publikacji:
2009
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
modulator trójstanowy ABS
pneumatyczny modulator ABS
przewodność
układ hamulcowy
ABS pneumatic modulator
braking systems
conductivity
Opis:
W pracy przedstawiono metodyką badań charakterystyk przepływowych pneumatycznego modulatora ABS. Na podstawie wykonanych badań dokonano komputerowej identyfikacji przewodności modulatora 472 195. Wyniki badań przedstawiono w postaci wykresów i tabel.
The method of flow characteristics investigation of ABS pneumatic modulator is presented in the paper. Computer identification of 472 195 modulator conductivity was performed on the basis of the conducted investigations. Results of investigations are presented in form of graphs and tables.
Źródło:
Archiwum Motoryzacji; 2009, 3; 225-234
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Conductivity of the Green-Sand Mould Poured with Copper
Autorzy:
Krajewski, P. K.
Piwowarski, G.
Suchy, J. S.
Powiązania:
https://bibliotekanauki.pl/articles/381756.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
castings
green sand mould
thermal conductivity
solidification
odlewy
masa formierska
przewodność cieplna
krzepnięcie
Opis:
The paper presents results of measuring thermal conductivity of green-sand mould material and time of pure-copper plate castings solidification evaluated from cooling curves. During the experiments pure Cu (99,8 %) plate was cast into the green-sand moulds. Basing on the measurements it was stated that thermal conductivity of the moulding sand has complex temperature variability, especially during the water vaporization and the obtained dependence should be used in the numerical calculations to improve their accuracy.
Źródło:
Archives of Foundry Engineering; 2014, 14, 4 spec.; 67-70
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effective heat conductivities in certain biperiodically stratified composites
Efektywne współczynniki przewodzenia ciepła dla pewnych biperiodycznych kompozytów warstwowych
Autorzy:
Szlachetka, O.
Wagrowska, M.
Wozniak, C.
Powiązania:
https://bibliotekanauki.pl/articles/40955.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
heat conductivity
heat conductivity coefficient
layered composite material
Źródło:
Acta Scientiarum Polonorum. Architectura; 2013, 12, 4
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ wybranych czynników na przewodność hydrauliczną popiołu lotnego
Influence of selected factors on hydraulic conductivity of fly ash
Autorzy:
Wasil, M.
Powiązania:
https://bibliotekanauki.pl/articles/403001.pdf
Data publikacji:
2012
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
popiół lotny
przewodność hydrauliczna
komora Rowe’a
fly ash
hydraulic conductivity
Opis:
Przewodność hydrauliczna jest jednym z parametrów określających przydatność popiołów lotnych do budowli ziemnych. W pracy przedstawiono wpływ nasycenia wodą, zawartości procentowej cementu w próbce popiołowej oraz gradientu hydraulicznego na wartość przewodności hydraulicznej. Próbki zagęszczane były przy wilgotności optymalnej metodą standardową Proctora. Badania przeprowadzono w komorze konsolidacji hydraulicznej typu Rowe’a. Na podstawie wyników badań stwierdzono, że im mniejsze nasycenie próbki popiołowej wodą, tym mniejsze wartości prędkości przepływu. Zaobserwowano zmniejszenie wartości prędkości przepływu przy większej procentowej zawartości cementu w próbce.
Hydraulic conductivity is one of the parameters which are used to determine usefulness of fly ash to earth structures. The paper presents the influence of some factors on value of permeability, such as: water-saturation, the addition of cement in the sample, hydraulic gradient and effective stress. The samples were compacted at optimum moisture content by means of Proctor’s method. Research was carried out in Rowe’s consolidation cell. It was found that the smaller water-saturation of fly ash sample, the lower the flow velocity. Higher percentage of cement in the sample affects the decrease of the flow velocity.
Źródło:
Budownictwo i Inżynieria Środowiska; 2012, 3, 1; 67-73
2081-3279
Pojawia się w:
Budownictwo i Inżynieria Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New pedotransfer function (“CRC”) for the prediction of unsaturated soil hydraulic conductivity using soil water retention data
Autorzy:
Bohne, K.
Renger, M.
Wessolek, G.
Powiązania:
https://bibliotekanauki.pl/articles/2082651.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
soil texture
hydraulic conductivity
transfer
function
soil water retention
Opis:
Several review articles have emphasized, that a comprehensive set of pedotransfer functions may be applied throughout a wide range of disciplines of Earth system sciences and are of great importance for land surface models. Most pedotransfer functions deducing soil hydraulic data from nonhydraulic soil data such as soil texture and bulk density, yield soil water retention predictions, but do not provide information concerning soil hydraulic conductivity. For this reason, a simple method was developed to estimate soil hydraulic conductivity using soil water retention information. Empirical equations are established to predict soil hydraulic conductivity from soil water retention information. These equations are relatively straightforward and do not require the fitting of nonlinear functions. Predictions of soil hydraulic conductivity using 106 soil samples indicates the reliable performance of the new method. The prediction quality of the new method was estimated from the calibration data set, which produced equivalent results to the Zacharias and Wessolek pedotransfer function, which were even better than the predictions obtained from the original Mualem-van Genuchten model, the Soto fractal model, and the pedotransfer function reported by Weynants and Vereecken. The stochastic structure of the calibration data reflects the presence of important soil structural properties, which are not represented by the soil water retention characteristics.
Źródło:
International Agrophysics; 2019, 33, 4; 503-510
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of density, temperature, moisture, and test direction on the thermal conductivity coefficient in pine wood
Autorzy:
Trochonowicz, Maciej
Szostak, Bartosz
Powiązania:
https://bibliotekanauki.pl/articles/27314437.pdf
Data publikacji:
2023
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
wood
thermal conductivity coefficient λ for wood
thermal insulation of wood
Opis:
The article focuses on the study of the thermal properties of pine wood, a material traditionally used in construction, especially in Poland. The trend towards sustainable construction necessitates a deeper analysis of its properties. Due to the insufficient amount of data in the literature on the thermal conductivity of pine wood, detailed studies were conducted, taking into account different wood densities. Seasoned wood samples were subjected to various processes and tests, measuring the heat conduction coefficient under different conditions. These results are relevant in the context of sustainable construction and will assist in further research on wood as a building material. The studies also took into account the effects of temperature and humidity on the thermal properties of wood, which are crucial for its application in various environmental conditions.
Źródło:
Budownictwo i Architektura; 2023, 22, 4; 5--13
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przewodnictwo cieplne kompozytów o osnowie metalowej zbrojonych węglem
Thermal conductivity of carbon-reinforced metal-matrix composites
Autorzy:
Homa, M.
Powiązania:
https://bibliotekanauki.pl/articles/391401.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
kompozyty metalowe
węglowa faza zbrojąca
przewodnictwo cieplne
metal-matrix composites
carbon reinforcement
thermal conductivity
Opis:
Praca przedstawia krytyczną analizę obecnego stanu wiedzy na temat właściwości termofizycznych metalowych materiałów kompozytowych, w których zastosowano różne typy zbrojącej fazy węglowej: grafit, diament, włókna węglowe, nanorurki węglowe, fulleren, grafen, tlenek grafenu. Materiały te musi cechować wysokie przewodnictwo cieplne (powyżej 300 W·(m·K)-1), rozszerzalność cieplna zbliżona do materiału, z którego ciepło jest odprowadzane (4‒9 × 10-6·K-1), niskie przewodnictwo elektryczne, duża odporność na działanie erozyjne łuku elektrycznego, niska i stabilna rezystancja zestykowa. Zastosowanie różnych typów zbrojenia węglowego o strukturze typu 2D, jak nanorurki węglowe, fullereny, grafen czy tlenek grafenu otwiera nowe możliwości w zakresie kształtowania właściwości termofizycznych, w tym przewodności cieplnej. Niestety, zaawansowane metalowe kompozyty zbrojone fazą węglową o strukturze 2D są nadal rzadko stosowane ze względu na nierozwiązane dotąd problemy technologiczne łączenia matrycy metalowej z fazą węglową typu 2D, co przekłada się na niezadawalającą przewodność cieplną tych materiałów oraz skomplikowany proces produkcji i ich cenę.
The paper presents a critical analysis of the current state-of-the-art thermo-physical properties of metal composite materials, in which different types of carbon reinforcing phase have been used: graphite, diamond, carbon fibres, carbon nanotubes, fullerene, graphene and graphene oxide. These materials must possess high thermal conductivity (above 300 W·(m·K)-1), thermal expansion similar to that of the material from which the heat is removed (4–9 × 10-6·K-1), low electric conductivity, high erosion resistance of the electric arc, as well as low and stable contact resistance. The application of various types of carbon reinforcement with a structure of the 2D type, such as carbon nanotubes, fullerenes, graphene or graphene oxide, opens new possibilities in the field of the formation of thermo-physical properties, including thermal conductivity. Unfortunately, advanced metal composites reinforced with a 2D type carbon phase are still rarely used, due to the unsolved technological problems connected with joining the metal matrix with the 2D type carbon phase, which results in unsatisfactory thermal conductivity of these materials as well as a complicated production process and a high price.
Źródło:
Prace Instytutu Odlewnictwa; 2016, 56, 4; 329-350
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Using Naphthalene and Local Soil with Concrete Mixture on Thermal Conductivity, Case of Mafraq City – Jordan
Autorzy:
Alzoubi, Hussain H.
Al-Olaimat, Duha J.
Powiązania:
https://bibliotekanauki.pl/articles/125324.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
naphthalene
thermal conductivity
compressive strength
silica
Opis:
This study explores the effect of direct incorporation of different ratios of naphthalene with soil into the concrete used in Mafraq-Jordan on the thermal conductivity of concrete mixtures. The methodology involved testing 72 concrete cube samples. The basic samples were prepared only from a mixture of water, silica sand, and cement without additives. The additives of local soil and naphthalene of different ratios: 2.5%, 5%, 7%, 10% and 15%, were added to the tested samples. The samples were classified into two groups in terms of size and dimensions; 36 cubes with 5×5×5 cm were tested only for thermal conductivity, and 36 cubes with 3×3×3 cm were tested for compressive strength and thermal conductivity. All samples were tested after 28 days of casting, according to the concrete standards. The results show that adding naphthalene and soil to the cementitious mixtures substantially decreases the thermal conductivity of concrete elements. A reasonable reduction in thermal conductivity was achieved compared with the basic case samples. However, the compressive strength of samples remained within the acceptable values from the stand point of structural engineering. This enhancement in the thermal properties of concrete can be applied in building systems as concrete blocks used in internal and external walls.
Źródło:
Journal of Ecological Engineering; 2019, 20, 4; 42-53
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przewodnictwo wodne mad Polski
Water conductivity of Polish alluvial soils
Autorzy:
Slawinski, C
Walczak, R.T.
Witkowska-Walczak, B.
Powiązania:
https://bibliotekanauki.pl/articles/1401809.pdf
Data publikacji:
2000
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
Polska
gleby
mady
woda glebowa
przewodnictwo wodne
Polska
soil
alluvial soil
soil water
water conductivity
Opis:
W pracy przedstawiono wyniki badań dotyczących opisu zmienności współczynnika przewodnictwa wodnego mad Polski. Stwierdzono, że najwyższymi wartościami współczynnika przewodnictwa wodnego charakteryzowały się warstwy powierzchniowa i podpowierzchniowa mad lekkich i bardzo lekkich w zakresie pF 0-pF 1,5, a najniższe wartości współczynnika odnotowano dla nich w zakresie pF 3-pF 4,2. Mady średnie i ciężkie oraz mady lekkie i średnie we wszystkich warstwach wykazały zbliżony charakter przebiegu wartości współczynnika przewodnictwa wodnego.
In the paper the results of water conductivity investigations of Polish alluvial soils are presented. It was stated, that the highest values of water conductivity coefficients were noticed in case of surface and subsurface layers of light and very light alluvial soils in the range pF0-pF 1,5 and the lowest values of this coefficiant were observed in the rangepF3-pF4,2. Medium weightand heavy as well as light and medium weight alluvial soils in the all layers had the similar courses of water conductivity coefficients.
Źródło:
Acta Agrophysica; 2000, 38; 281-288
1234-4125
Pojawia się w:
Acta Agrophysica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effects of conductivity and pH of saliva on electrochemical potentials of metallic dental materials
Autorzy:
Opydo-Szymaczek, J.
Opydo, J.
Opydo, W.
Powiązania:
https://bibliotekanauki.pl/articles/97371.pdf
Data publikacji:
2015
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
metallic dental materials
electrochemical potential
galvanic cells
oral galvanism
conductivity
pH
Opis:
The paper presents results of the study on electrochemical potentials of metallic dental materials. Seven alloys, amalgam and chromium-nickel steel were examined as well as the effect of the solution conductivity ranging from 12.5 μS/cm to 2.01 mS/cm and solution pH within the range of 5.5 to 11.2 on electrochemical potentials of the materials. Amalgam presented with the lowest changes of the standard potential due to changing conductivity and pH of the solution within experiment conditions. Moreover, increase of pH value caused decrease of electrochemical potential of all examined materials, apart from amalgam. It was proved that electromotive force of galvanic cells formed by some of the examined materials and amalgam are often higher than 200 mV. Statistica software was used for mathematical analysis of the results.
Źródło:
Computer Applications in Electrical Engineering; 2015, 13; 143-152
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Temporal stability of electrical conductivity in a sandy soil
Autorzy:
Pedrera-Parrilla, A.
Brevik, E.C.
Giraldez, J.V.
Vanderlinden, K.
Powiązania:
https://bibliotekanauki.pl/articles/26163.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
temporal stability
electrical conductivity
sandy soil
soil texture
soil water content
spatial variability
Źródło:
International Agrophysics; 2016, 30, 3
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Fe Content on the Mechanical Properties and Thermal Conductivity of the Al-RE Alloys
Autorzy:
Yoo, Hyo-Sang
Kim, Yong-Ho
Son, Hyeon-Taek
Powiązania:
https://bibliotekanauki.pl/articles/356397.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum
extrusion
rare earth
thermal conductivity
mechanical property
Opis:
In this study, we investigated the effect of Fe addition (0, 0.25, 0.50 and 0.75 wt.%) on the microstructure, mechanical properties and electrical conductivity of as-cast and as-extruded Al-RE alloys. As the Fe element increased by 0 and 0.75wt.%, the phase fraction increased to 5.05, 5.76, 7.14 and 7.38 %. The increased intermetallic compound increased the driving force for recrystallization and grain refinement. The electrical conductivity of Al-1.0 wt.%RE alloy with Fe addition decreased to 60.29, 60.15, 59.58 and 59.13 % IACS. With an increase in the Fe content from 0 to 0.75 wt.% the ultimate tensile strength (UTS) of the alloy increased from 74.3 to 77.5 MPa. As the mechanical properties increase compared to the reduction of the electrical conductivity due to Fe element addition, it is considered to be suitable for fields requiring high electrical conductivity and strength.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 3; 1029-1033
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Conductivity of Square-Well Fluids
Autorzy:
Srivastava, R.
Khanna, K.
Powiązania:
https://bibliotekanauki.pl/articles/1585064.pdf
Data publikacji:
2009-12
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
66.25.+g
Opis:
The thermal conductivity of a system consisting of square-well particles has been determined by the extension of the Enskog formula of the hard-sphere model to square-well fluid. The approach is the same as applied for the diffusion coefficients and shear viscosity of square-well fluid. The addition of an attractive part in the hard-sphere potential such as square-well potential remains insensitive to influence the thermal conductivity. The results obtained are in a good agreement with the molecular dynamics results.
Źródło:
Acta Physica Polonica A; 2009, 116, 6; 1044-1047
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of electronic exposure and heat treatment on the electrical conductivity of epoxy polymer materials
Autorzy:
Udovytska, Yuliia
Luniov, Sergiy
Kashytskyi, Vitalii
Maslyuk, Volodymyr
Megela, Ivan
Powiązania:
https://bibliotekanauki.pl/articles/950073.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
irradiation
epoxy resin
specific electrical conductivity
heat treatment
Opis:
The influence of electron irradiation fluxes with energy of 12 MeV and heat treatment on the electrical properties of epoxypolymers with PEPA content of 11, 12 and 13 wt.h. per 100 wt. including epoxy resin. It is show that the electrical conductivity of epoxypolymer increases with electron irradiation fluxes greater than 10 kGy. It found that extra heat treatment of irradiated samples with a hardener content of 12 wt. h. hours leads to an increase in their electrical conductivity. The nature of the obtained dependences of electrical conductivity is determine by the processes of cross-linking, radiation, thermal destruction and mass fraction of the hardener. Radiation-stimulated increase in the conductivity of epoxypolymers can be use to create conductive protective coatings and sensor electronics elements.
Źródło:
Technical Sciences / University of Warmia and Mazury in Olsztyn; 2020, 23(1); 81-89
1505-4675
2083-4527
Pojawia się w:
Technical Sciences / University of Warmia and Mazury in Olsztyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania przewodności elektrolitycznej właściwej wód opadowych w rejonie Bielska-Białej
The study on specific electrical conductivity of water precipitation in Bielsko-Biała region
Autorzy:
Kasza, H.
Powiązania:
https://bibliotekanauki.pl/articles/400333.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
wody opadowe
przewodność elektrolityczna właściwa
rain water
specific electrical conductivity
Opis:
Przedstawiono podsumowanie wyników wieloletnich badań przewodności elektrolitycznej właściwej wód opadowych, prowadzonych w siedmiu punktach zlokalizowanych wokół Bielska-Białej. Na każdym ze stanowisk czas badań wynosił około jednego roku. Badania prowadzono w latach 2002–2010. Zebrane próbki opadów atmosferycznych cechowały się dużym zróżnicowaniem przewodności właściwej (od 1,8 μS·cm-1 do 188,5 μS cm-1); średnia arytmetyczna i ważona dla wszystkich pomiarów wyniosła odpowiednio 36,5 μS·cm-1 i 29,9 μS·cm-1. Najczęściej notowano opady o przewodnictwie „lekko podwyższonym” (15,1–30,0 μS·cm-1) i „znacznie podwyższonym” (30,1–45,0 μS·cm-1) – odpowiednio 36,6% i 25,9% prób opadów. Próbki opadów kwalifikowanych jako nie zanieczyszczone (< 15 μS·cm-1) odnotowano w każdym z punktów badawczych. Stanowiły one łącznie 8,9% prób. Wystąpiły sezonowe zmiany przewodności właściwej opadów atmosferycznych. W sezonie grzewczym była ona wyższa niż w ciepłej porze roku. Przewodność wód opadowych formowana była w dużej mierze przez zanieczyszczenia nadchodzące z kierunku zachodniego i południowo-zachodniego oraz miejscowe źródła ich emisji.
The results of long-term studies on specific electrical conductivity of water precipitation conducted in seven re-search points located near Bielsko-Biała were presented. At each point a period of investigation lasted ca. 1 year. The research was performed in the year range 2002–2010. The collected samples of precipitation were characterized by a great diversity of conductivity (1.8–188.5 μS·cm-1); arithmetic and weighted average of all measurements was respectively 36.5 μS·cm-1 and 29.9 μS·cm-1. Most frequently, conductivity of rain water was “slightly increased” (15.1–30.0 μS·cm-1) and “significantly increased” (30.1–45.0 μS·cm-1), respectively 36.6% and 25.9% of the total samples. Samples of precipitation classified as not contaminated (<15 μS· cm-1) were observed in each of the re-search points. They represented 8.9% of the all samples. There were seasonal changes in the conductivity of precipitation. During the heating season the conductivity was higher than in the warm season. Rainwater conductivity was formed mainly by pollution coming from the west and southern-west direction, and by local sources of its emission.
Źródło:
Inżynieria Ekologiczna; 2015, 41; 166-172
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Weryfikacja opracowanego układu do wyznaczania współczynnika przewodności cieplnej materiałów
Verification of a system for determining thermal conductivity coefficient of the materials
Autorzy:
Mrowiec, A.
Powiązania:
https://bibliotekanauki.pl/articles/266651.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
metoda gorącego drutu
współczynnik przewodności cieplnej
hot wire method
thermal conductivity coefficient
Opis:
W artykule przedstawiono udoskonalony układ pomiarowy do wyznaczania współczynnika przewodności cieplnej ciał stałych i cieczy metodą „gorącego drutu” (rozwiązanie zgłoszono w Urzędzie Patentowym RP – nr P.425050). Do pomiaru przyrostu temperatury elementu grzejnego w funkcji temperatury badanego materiału wykorzystano autorski przetwornik różnicy temperatur z wyjściem napięciowym. Po wykonaniu kalibracji dla przyrostu temperatury ΔT = 3,2°C pozwala on na przeprowadzanie badań eksperymentalnych w bardzo szerokim zakresie zmian temperatury otoczenia z dużą dokładnością pomiarową. Dla tak zbudowanego układu pomiarowego wykonano badania weryfikacyjne przy małych mocach grzania drutu grzejnego (z zakresu 0,18...1,23W) wykorzystując wodę destylowaną jako ciecz wzorcową.
Improved measuring system by „hot wire” method for determination of thermal conductivity coefficient for the solid bodies and fluids was presented in this article. In this system, original (patent application) differential converter for measurement of temperature rise of a heating element compared to temperature of an examined material was used. Calibrating to the measuring range ΔT = 3,2°C enables to conduct experimental research in a very wide range of the changes of ambient temperature (e.g. in the climatic chambers, in which we can get the change of temperature within the range between -20°C and +80°C). Verification research in the ambient temperature (21±1ºC) with selected powers of heating up a heating wire between 0,18 and 1,23 W was conducted for such measuring system. Distilled water of the value of literature thermal conductivity coefficient ·= 0,61 W/(m·K) was used for the research. An error from comparison of obtained experimental values of thermal conductivity coefficient with values provided in literature, in the examined scope, does not exceed -6,28%.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2018, 59; 145-148
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczanie przewodności cieplnej drewna metodą „gorącego drutu”
Determination of wood thermal conductivity using the hot-wire method
Autorzy:
Prałat, K.
Mrowiec, A.
Walczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/2072522.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
współczynnik przewodzenia ciepła
metoda gorącego drutu
thermal conductivity coefficient
hot wire method
Opis:
Praca zawiera wyniki badań doświadczalnych wyznaczania współczynnika przewodzenia ciepła λ sześciu gatunków drewna. Zastosowano metodę „gorącego drutu”, a w pomiarach wykorzystano czujnik Pt 500, który z układem pomiarowym tworzył dokładny analogowy przetwornik pomiarowy temperatury z wyjściem napięciowym. Wykonano go indywidualnie na potrzeby badań i podłączono do komputerowego stanowiska pomiarowego składającego się z wejściowego wielofunkcyjnego 14-bitowego przetwornika A/C typu NI USB-6009 firmy National Instruments i interaktywnego oprogramowania do rejestracji i pomiarów co 0,1 sekundy. Obliczone wartości współczynników przewodzenia ciepła znajdowały się w przedziale 0,121÷0,218 [W/(m K)] i różniły się od wartości literaturowych nie więcej niż 5%. Najniższe wartości uzyskano dla drewna sosnowego, największe dla drewna grabu.
Results of thermal conductivity measurements of six different wood species are presented and discussed in the paper. A new measurement set-up is described. New futures are characterized by thin constantan wire and low heating power. Very accurate temperature measurements were performed and recorded in time intervals of 0.1 seconds. The calculated values of thermal conductivity coefficients are in a range of 0.121÷0.218 [W/(m K)] and did not deviate from the literature values more than 5%. The lowest values were obtained for pine and the highest for hornbeam.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 4; 368--369
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Ohmic Heating on the Rheological Characteristics and Electrical Conductivity of Mulberry (Morus nigra) Puree
Autorzy:
Hardinasinta, Gemala
Salengke, Salengke
Mursalim, Mursalim
Muhidong, Junaedi
Powiązania:
https://bibliotekanauki.pl/articles/1417183.pdf
Data publikacji:
2021-08-20
Wydawca:
Instytut Rozrodu Zwierząt i Badań Żywności Polskiej Akademii Nauk w Olsztynie
Tematy:
ohmic heating
mulberry puree
rheological characteristics
pseudo activation energy
electrical conductivity
Opis:
The effect of temperatures (30–90°C) and concentrations (50% and 100%) on rheological parameters of mulberry puree processed with ohmic heating (OH) were evaluated. The electrical conductivities of mulberry puree ranged from 0.022 to 0.102 S/m for 50% puree and 0.052 to 0.185 S/m for 100% puree. The best model for rheological parameters of mulberry puree was the power law model (R²>0.90). The effects of OH treatment and temperature of puree on the flow behavior index (n) were insignificant (p≥0.05). However, a significant difference (p<0.05) between consistency coefficient (K) of OH-treated and control sample was observed in 100% puree. The pseudo activation energy (Ea) of ohmic-treated puree was 9.67 kJ/mol for 50% puree and 3.69 kJ/mol for 100% puree, both of these values were significantly lower than that of the unprocessed 100% puree (16.07 kJ/mol). The obtained Ea indicates that after undergoing ohmic heating pretreatment, consistency coefficient of mulberry puree became less sensitive to temperature.
Źródło:
Polish Journal of Food and Nutrition Sciences; 2021, 71, 3; 289-297
1230-0322
2083-6007
Pojawia się w:
Polish Journal of Food and Nutrition Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowa metoda pomiaru współczynnika filtracji osadów dennych
A new method of measuring the hydraulic conductivity of the bottom sediment
Autorzy:
Marciniak, M.
Chudziak, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/2075434.pdf
Data publikacji:
2015
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
filtrometr
gradientomierz
drenaż
infiltracja
współczynnik filtracji
filtrometer
gradientmeter
drainage
infiltration
hydraulic conductivity
Opis:
Interaction of surface water and groundwater is an important element of issue in hydrogeological measurements. Surface water may infiltrate into the subsurface through the bed sediments of rivers and water reservoirs. An opposite direction of reverse water flow through these sediments is also possible with groundwater seeping into surface water. The paper presents two new measuring apparatus: a so-called “filtrometer” and a “gradientmeter”. The filtrometer enables measuring the intensity of water filtration through bed sediments, both during drainage and infiltration. The gradientmeter is designed to measure the hydraulic gradient in the bed sediments. After measuring both of these parameters, it is possible to determine the in situ hydraulic conductivity of these sediments. Usability testing of the new devices was performed under field conditions. The filtrometer and the gradientmeter were used to determine the drainage conditions of a tested section of the Parsêta river. The drainage volume measured with the instruments was in good agreement accordance with the value obtained using the differential water flow method. The proposed new method way of determining the hydraulic parameters of the bed sediments extends the present scope of hydrogeological research.
Źródło:
Przegląd Geologiczny; 2015, 63, 10/2; 919--925
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of mesh quality on the numerical estimation of saturated water conductivity of pore media
Autorzy:
Gackiewicz, B.
Lamorski, K.
Slawiński, C.
Hsu, S.-Y.
Chang, L.-C.
Powiązania:
https://bibliotekanauki.pl/articles/2082923.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
porous media
numerical modelling
hydraulic
conductivity
mesh accuracy
Opis:
The numerical modelling of transport phenomena in porous media often requires a compromise between grid precision and the accuracy of simulation results. This study demonstrates the impact of errors on the accuracy of the reproduction of the actual pore space by the numerical grid on the estimated values of the saturated water conductivity. Four types of computational grids with varying levels of complexity were prepared for each of the 12 tomographic images of the porous specimens. The specific surfaces and total porosities were calculated for each of the meshes and compared with those parameters calculated for binarized tomographic images. Simulations of steady flow were performed on the computational grids, and the saturated water conductivity values were calculated. It has been shown that an insufficiently accurate mesh only reproduces the largest pore spaces in the analysed sample, which most often leads to an underestimation of the water conductivity coefficient. The following criterion for the optimal accuracy of the computational grid is proposed, it is based on the voxel size of the tomographic images of the porous media: the minimum size of the cell in the mesh used for simulations has to be at most two times the size of the voxel used in the tomographic scans of the porous medium.
Źródło:
International Agrophysics; 2020, 34, 4; 473-483
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Conductivity Effects in Bi₂TeO₅ Single Crystals
Autorzy:
Agarkov, K.
Sadovskaya, L.
Powiązania:
https://bibliotekanauki.pl/articles/1031021.pdf
Data publikacji:
2018-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
72.20.Jv
Opis:
The current-voltage characteristics (I-V) of non-stoichiometric bismuth tellurite crystals were studied in a range of temperatures from 150°C to 350°C and fields up to 2.5 kV/cm with asymmetric contacts (In-Ga eutectic and Na₂SiO₃). The I-V curves and observed monopolar injection are described by the approximation of space charge limited currents. In the composition of 47% Bi₂O₃-53% TeO₂ electronic conduction is prevailed. In the composition 43% Bi₂O₃-57% TeO₂ the conductivity is contributed by electrons and holes. The spectrum of local states in the band gap of the studied crystals is quasicontinuous, which cannot be described by models of a discrete or exponential distribution.
Źródło:
Acta Physica Polonica A; 2018, 133, 4; 940-942
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies