Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "catenary" wg kryterium: Wszystkie pola


Tytuł:
An influence of track stiffness discontinuity on pantograph base vibrations and catenary–pantograph dynamic interaction
Autorzy:
Bryja, Danuta
Hyliński, Adam
Powiązania:
https://bibliotekanauki.pl/articles/178448.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
catenary–train–track system
track stiffness discontinuity
railway vehicle suspension
vibration simulation
catenary–pantograph dynamic interaction
Opis:
In this article, the computational methodology of the catenary–train–track system vibration analysis is presented and used to estimate the influence of vehicle body vibrations on the pantograph–catenary dynamic interaction. This issue is rarely referred in the literature, although any perturbations appearing at the pantograph–catenary interface are of great importance for high-speed railways. Vehicle body vibrations considered in this article are induced by the passage of train through the track stiffness discontinuity, being a frequent cause of significant dynamic effects. First, the most important assumptions of the computational model are presented, including the general idea of decomposing catenary–train–track dynamic system into two main subsystems and the concept of one-way coupling between them. Then, the pantograph base vibrations calculated for two train speeds (60 m/s, 100 m/s) and two cases of track discontinuity (a sudden increase and a sudden decrease in the stiffness of track substrate) are analyzed. Two cases of the railway vehicle suspension are considered – a typical two-stage suspension and a primary suspension alone. To evaluate catenary–pantograph dynamic interaction, the dynamic uplift of the contact wire at steady arm and the pantograph contact force is computed. It is demonstrated that an efficiency of the two-stage suspension grows with the train speed; hence, such vehicle suspension effectively suppresses strong sudden shocks of vehicle body, appearing while the train passes through the track stiffness discontinuity at a high speed. In a hypothetical case when the one-stage vehicle suspension is used, the pantograph base vibrations may increase the number of contact loss events at the catenary–pantograph interface.
Źródło:
Studia Geotechnica et Mechanica; 2020, 42, 2; 111-124
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling and identification of catenary-pantograph system
Modelowanie i identyfikacja układu lina trakcyjna-pantograf
Autorzy:
Kumaniecka, A.
Prącik, M.
Powiązania:
https://bibliotekanauki.pl/articles/280722.pdf
Data publikacji:
2003
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
dynamics
catenary
pantograph
Opis:
The purpose of this paper is to present a survey and analysis of the dynamic interaction between the pantograph and a catenary system. The work presented in this paper emphasizes the modelling, simulation of co-operating systems and identification done by experiments on a physical model. For analytical and numerical investigation the overhead electrification system is modelled by visco-elastically connected double Bernoulli-Euler beams. For the pantograph - a model of masses vibrating in the vertical plane at a constant velocity and having four degrees of freedom (DOF) is adopted. The construction of a simple virtual model for computer simulation and some results obtained from investigations carried out on this model are presented. The work constains some numerical examples that illustrate presented theoretical investigations. The analysis of the virtual and two physical experimental models goves the possibility and benefit of their mutual verification and comparison.
Celem pracy jest analiza dynamicznej współpracy pantografu z linią trakcyjną. Rozważane są zagadnienia związane z modelowaniem i symulacją zjawisk zachodzących w układach zasilania kolejowej trakcji elektrycznej, a także identyfikacją na fizycznym modelu doświadczalnym. W pracy przyjęto model sieci trakcyjnej złożony z dwóch równolegle umieszczonych belek Bernoulliego-Eulera. Odbierak prądu, poruszający się ze stałą prędkością, modelowany jest nieliniowym cztero-masowym układem wykonującym ruch w płaszczyźnie pionowej. Przedstawiono konstrukcję modelu wirtualnego i wyniki symulacji przeprowadzonych na tym modelu. Analiza wyników eksperymentów przeprowadzonych na fizycznym modelu doświadczalnym i na modelach symulacyjnych pozwala na ich wzajemną weryfikację.
Źródło:
Journal of Theoretical and Applied Mechanics; 2003, 41, 4; 887-901
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie termowizji w badaniach terenowych sieci trakcyjnej
Application of termovision technology in testing the catenary
Autorzy:
Majewski, W.
Powiązania:
https://bibliotekanauki.pl/articles/250333.pdf
Data publikacji:
2010
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
sieć trakcyjna
termowizja
catenary
termovision
Opis:
Wykorzystanie termowizji rozszerza zakres możliwości badawczych czynnych sieci trakcyjnych zasilanych napięciem 3 kV DC. Pozwala na pomiary temperatury przewodów oraz ich drgań, bez konieczności stosowania separacji napięciowej. Dotychczas do pomiarów zmian temperatury przewodów i łączących je zacisków jako czujniki pomiarowe wykorzystywano tylko termoelementy. Jest to metoda dotykowa pozwalająca na pomiary temperatury elementów praktycznie nie będących pod napięciem, realizowana zasadniczo w warunkach laboratoryjnych. Zastosowanie kamery termowizyjnej pozwoliło na prowadzenie w terenie badań nagrzewania się elementów sieci od prądów trakcyjnych pobieranych przez tabor elektryczny. Kamera termowizyjna rejestruje promieniowanie podczerwone, emitowane przez każde dato fizyczne.
Źródło:
TTS Technika Transportu Szynowego; 2010, 5-6; 64-67
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zmniejszanie zużycia przewodów sieci trakcyjnej dużych prędkości poprzez zmiany konstrukcji pantografów i sieci trakcyjnej
making smaller the wear of catenary wires by chaniging of pantograph and catenary design
Autorzy:
Maciołek, T.
Powiązania:
https://bibliotekanauki.pl/articles/253037.pdf
Data publikacji:
2007
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
sieć traksyjna
transport kolejowy
catenary wires
railway transport
Opis:
Rozwój elektrycznego systemu sieciowego - w szczególności szynowego - polega głównie na zwiększeniu prędkości pociągów i niezawodności pracy. Zapewnienie energii dla ruchu szybkich pojazdów szynowych opiera się najczęściej na dostarczaniu energii do pojazdów z nieruchomej górnej sieci trakcyjnej poprzez ślizgający się po niej pantograf. Sposób ten jest nadal podstawowym sposobem przekazywania energii do ruchomego pojazdu zarówno w stosunkowo wolnych tramwajach, jak i najszybszych pociągach (rekordowa prędkość prawie 575 km/h)
Źródło:
TTS Technika Transportu Szynowego; 2007, 12; 55-58
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Skrzyżowanie tramwajowe - newralgiczny punkt sieci trakcyjnej
Tram line crossing - a vital point of catenary
Autorzy:
Maciołek, T.
Powiązania:
https://bibliotekanauki.pl/articles/254177.pdf
Data publikacji:
2015
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
skrzyżowanie tramwajowe
sieć trakcyjna
tram line crossing
catenary
Opis:
Przerwy stykowe między pantografem i siecią trakcyjną przy przepływie prądu wywołują uszkodzenia powierzchni przewodu i nakładki stykowej. Przyspieszają one zużycie eksploatacyjne. W artykule przedstawione zostały efekty przerw stykowych, jak również przyczyny ich powstawania na skrzyżowaniu sieci. Zaprezentowano również rozwiązania konstrukcji skrzyżowania sieci trakcyjnej górnej. Przeprowadzona została analiza funkcjonowania skrzyżowania we współpracy z odbierakiem.
Breaks of contact between pantograph and catenary during current flow cause damages of surfaces of contact were and pantograph's contact strip. So exploitation worn-out of both is inereased. There are presented in the paper causes and effects of breaks in contact at catenary crossing. Solutions of catenary crossing construction are shown. An undertaken analysis of catenary crossing co-operation with a pantograph is presented.
Źródło:
TTS Technika Transportu Szynowego; 2015, 12; 40-48
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Finite element analysis of pantograph-catenary dynamic interaction
Autorzy:
Zdziebko, P.
Uhl, T.
Powiązania:
https://bibliotekanauki.pl/articles/224114.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pantograph
catenary
interaction
EN 50318
FEM
pantograf
sieci trakcyjne
interakcja
MES
Opis:
Numerical simulations of the pantograph-catenary dynamic interaction allow for assessment of the current collection quality provided by this subsystem at the design stage of the pantograph or the catenary system. In this paper, the authors present numerical results of simulations of the dynamic interaction between a pantograph and a catenary. Adopted catenary and pantograph models are consistent with the reference model presented in the EN 50318:2002 document, which describes the validation procedure of the simulation for the dynamic interaction between pantograph and overhead contact line. Authors have used the Finite Element Method to analyze this complex system. Ten catenary spans of simple catenary (one messenger wire and one contact wire) are modelled, each of them is 60m long. The pre-sag of the catenary is 0mm and the model of the catenary includes the stagger which equals ±200mm. The pantograph model consists of lumped masses which are connected each other with spring-damper elements. First, the static initial configuration is obtained (under gravity and tensioning loads), after which the dynamic transient simulation is conducted. Obtained results for the contact force and uplifts at supports are within the reference ranges presented in the EN 50318:2002 document, therefore it can be considered that the adopted model correctly reproduces the dynamic behaviour of the pantograph-catenary dynamic interaction.
Źródło:
Archives of Transport; 2016, 39, 3; 77-85
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozkład obciążeń zasilaczy sieci trakcyjnej tramwajowej przy zmienionej konfiguracji zasilania
Load distirbution of the tram catenary power supply units with the changed configuration of supply
Autorzy:
Chrabąszcz, I.
Prusak, J.
Stecyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/249934.pdf
Data publikacji:
2015
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
sieć trakcyjna
zasilacz sieci trakcyjnej
zasilanie
catenary
power catenary
power
Opis:
W niniejszym artykule skrótowo omówiono sposoby zasilania sieci trakcyjnej. Następnie zaprezentowano niektóre wyniki badań symulacyjnych, związanych z analizą obciążeń kabli zasilających sieć trakcyjną tramwajową z wybranej podstacji. Do badań wzięto istniejący odcinek linii tramwajowej. Badania symulacyjne przeprowadzono dla warunków rzeczywistych (profilu trasy, lokalizacji przystanków i rozkładu jazdy tramwajów), które porównano z wynikami uzyskanymi po przeprowadzeniu teoretycznej zmiany w układzie, polegającej na zasilaniu połączonych sąsiednich odcinków 2 kablami (zasilanie „dwustronne”). W badaniach uwzględniono również przypadek zakłócenia rozkładu jazdy (zagęszczony ruch tramwajów).
This article briefly discusses methods of traction contact system powering. Then some simulation results, related to the analysis of load of tram network power cables in the selected substa¬tion, were presented. For the test, an existing section of the tram line was taken. Simulation studies were carried out for the actual conditions (route profile, the location of tram stops and timetable), which were compared with those obtained after carrying out the theoretical change in the system by supplying adjacent connected sections with use of two cables (duplex powering .The study also included a case of timetable interference (caused by increased traffic of trams).
Źródło:
TTS Technika Transportu Szynowego; 2015, 9; 45-48
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamics of the catenary modelled by a periodical structure
Dynamika sieci trakcyjnej modelowanej strukturą periodyczną
Autorzy:
Kumaniecka, A.
Snamina, J.
Powiązania:
https://bibliotekanauki.pl/articles/280775.pdf
Data publikacji:
2008
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
speed railways
pantograph-catenary system
wave motion
Opis:
In the paper, a dynamic analysis of a two-level model of the catenary which takes into account periodic distribution of hangers and supports is provided. An analytical method is proposed for calculating the response of the catenary to a uniformly moving pantograph. The model of the catenary is composed of two strings (the contact and carrying cables) connected by lumped mass-spring-dashpot elements equidistantly positioned along the strings. These elements are assumed to be visco-elastic. The pantograph is modelled by a concentrated force which moves along the contact cable. The force exerted by the pantograph varies harmonically. This model is capable of describing coupled wave dynamics of the catenary. The proposed method of calculations is based on the Fourier transformation and, therefore, is applicable only to linear models of the catenary. In the analysis, the periodicity condition is used. The spectral analysis is carried out. General results are illustrated by a numerical example in which the effect of wave propagation is visible.
W pracy przedstawiono wyniki analizy dynamicznej modelu sieci trakcyjnej z uwzględnieniem charakterystycznej powtarzalności fragmentów konstrukcji zawieszenia przewodu jezdnego i wieszaków. Podano rozwiązanie problemu współdziałania sieci z poruszającym się ze stałą prędkością odbierakiem prądu. Model sieci składa się z dwóh nieskończenie długich strun oddziaływujących ze sobą poprzez sprężysto- tłumiące elementy rozłożone periodycznie. Oddziaływanie odbieraka prądu na dolną strunę modelowane jest harmonicznie zmienną siłą. Stosując transformację Fouriera, przeprowadzono analizę częstotliwościową ruchu układu. Wykorzystano warunek periodyczności. Rezultaty rozważań analitycznych zobrazowano przykładem numerycznym.
Źródło:
Journal of Theoretical and Applied Mechanics; 2008, 46, 4; 869-878
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Górna sztywna sieć trakcyjna
Upper stiff system of overhead catenary
Autorzy:
Rojek, A.
Majewski, W.
Powiązania:
https://bibliotekanauki.pl/articles/250030.pdf
Data publikacji:
2015
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
sieć trakcyjna
sieć sztywna
sieć górna
catenary
overhead network
upper network
Opis:
Szczególnym rozwiązaniem górnej sieci trakcyjnej jest sieć sztywna, zwana siecią tunelową. Jej cechą charakterystyczną jest zwarta konstrukcja, nie wymagająca dużej przestrzeni. W artykule przedstawiono konstrukcję i właściwości aluminiowej szynie prądowej oraz wyniki badań jakości współpracy sieci sztywnej z pantografami.
The overhead contact system is an element of the railway infrastructure without reserve. Its task is to provide electricity to the traction ' vehicles. A particular solution to the overhead contact line is overhead conductor rail, often called overhead tunnel line. It is characterized by compact design, it does not require a large space. The essential element of this solution is aluminium hollow section. Although the cost of building a overhead conductor rail exceeds the cost of building the overhead contact line with catenary suspension, due to the possibility of decreased height of a tunnel the entire investment is cheaper. Overhead conductor rail, in addition to the tunnels, it is operated under wide viaducts, bridges bascule and complex technical facilities for rail vehicles. The paper shows the properties of the aluminium conductor rail as the profile of the section, its construction, mounting, described transition area from catenary to overhead conductor rail. In Europe, there are several companies that specialize in the design, manufacture and installation of overhead conductor rails. In the paper have been used materials of company: Siemens AG (conductor rail S/cat SRj, Furrer+Frey AG (CR2 and CR3HS conductor rail) and Electren SA (conductor rail GSSTj and experience with IK's research in the field. Each of these companies has its own solutions of overhead conductor rail structures.
Źródło:
TTS Technika Transportu Szynowego; 2015, 1-2; 61-64
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przestawne sieci trakcyjne – elastyczne i sztywne
Inverted systems of overhead catenary – elastic and stiff
Autorzy:
Maciołek, T.
Powiązania:
https://bibliotekanauki.pl/articles/252191.pdf
Data publikacji:
2013
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
przestawna sieć trakcyjna
tabor kolejowy
overhead catenary
rolling stock
Opis:
Obsługa elektrycznego taboru kolejowego i tramwajowego prowadzona jest w halach. Nowoczesny tabor elektryczny, szczególnie pasażerski oraz tabor modernizowany, ma na dachu oprócz odbieraków zamontowanych wiele nowych urządzeń. Urządzenia te, podobnie jak odbieraki, wymagają również obsługi. Wiele hal obsługowych w Polsce wymaga aktualnie remontów lub modernizacji. Dla części z nich celowe jest wprowadzenie sieci trakcyjnych przestawnych. Praca obsługi na dachu taboru bez obecności sieci trakcyjnej jest łatwiejsza. Większe jest bezpieczeństwo obsługi. Możliwe jest zastosowanie sieci trakcyjnej również w halach z suwnicą nad torami.
Źródło:
TTS Technika Transportu Szynowego; 2013, 4; 40-41
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Napięcie sieci trakcyjnej jako wyznacznik możliwości zwiększenia odzysku energii
Voltage the system of overhead catenary as the indicator of possibilities of increasing of the recycling
Autorzy:
Bartłomiejczyk, M.
Połom, M.
Powiązania:
https://bibliotekanauki.pl/articles/250261.pdf
Data publikacji:
2013
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
energia
sieć trakcyjna
trakcja miejska
energochłonność
overhead catenary
energy
catenary
traction city
energy consumption
Opis:
Zauważalne w ostatnim dziesięcioleciu zwiększenie liczby pojazdów elektrycznych komunikacji miejskiej, wyposażonych w zdolność hamowania odzyskowego, otwiera możliwości zmniejszenia energochłonności trakcji miejskiej. Jednakże pomimo nowych szans energooszczędności związanych z hamowaniem odzyskowym ze strony pojazdów, podstacje trakcyjne nie są wyposażone w urządzenia służące do akumulacji energii tego typu hamowania.
Źródło:
TTS Technika Transportu Szynowego; 2013, 4; 42-46
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ prędkości przemieszczania się pantografu wzdłuż sieci jezdnej na układ odbierak prądu - sieć trakcyjna
Impact of the velocity of a pantograph traversing along the catenary on the pantograph - catenary system
Autorzy:
Jagiełło, A. S.
Dudzik, M.
Powiązania:
https://bibliotekanauki.pl/articles/154379.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
odbierak prądu
pantograf
model sieci jezdnej
OPST
pantograph
catenary model
Opis:
W pracy przedstawiono zagadnienie modelowania układu drgającego odbierak prądu –sieć trakcyjna jako modelu fizycznego z masą skupioną sieci trakcyjnej. Do celów symulacyjnych spośród wielu istniejących modeli pantografów wybrano model WBL 85 3 kV, który to między innymi posiadają lokomotywy EU11 oraz EU43. Zaprezentowano również wyniki wstępnych symulacji dla tego modelu przy wybranych prędkościach chwilowych ruchu postępowego odbieraka prądu wzdłuż sieci jezdnej. Badany model odbieraka prądu przyjęto jako układ o czterech stopniach swobody, natomiast masę sieci jezdnej przyjęto jako masę skupioną w funkcji położenia zależnego od czasu.
With increase in the traction vehicle velocity, the quality requirements related to the vehicle power consumption also rise [2]. In order to ensure the continuous and uninterrupted energy supply to a traction unit, the maintained constant force between a pantograph and a catenary is recommended [3]. In addition, a value of the force needs to be proper because if it is small, the pantograph detachment from the catenary can occur easier. If the value is high, frictional wear of the catenary or pantograph slipper increases. The dynamic model of the pantograph with a catenary depends, inter alia, on an instantaneous pantograph velocity which corresponds to the traction unit velocity if the pantograph is constantly situated on the vehicle; parameters such as pantograph stiffness, pantograph attenuation coefficients, masses of the pantograph elements as well as catenary parameters. In addition, the dynamic model also depends on external coefficients which affect the modeled catenary and the modeled pantograph. In the paper there is presented a pantograph – catenary vibration model as a physical model. The pantograph is modeled as a structure with four degrees of freedom. The catenary is a concentrated mass modeled as a function of the time–dependent position. For the simulation purposes the WBL 85 3 kV pantograph model was chosen. The paper presents also preliminary simulation results for this model for chosen velocities of the pantograph traversing along the catenary. The chosen velocities were 10 m/s, 20 m/s and 30 m/s. The simulations were performed for zero initial conditions.
Źródło:
Pomiary Automatyka Kontrola; 2013, R. 59, nr 10, 10; 1084-1088
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aspekty projektowania sieci trakcyjnych kolei dużych prędkości
Aspects of designing systems of overhead catenary for high speed lines
Autorzy:
Maciołek, T.
Powiązania:
https://bibliotekanauki.pl/articles/250425.pdf
Data publikacji:
2012
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
sieć trakcyjna
kolej dużych prędkości
overhead catenary
high speed lines
Opis:
Dotychczas w Polsce eksploatowane są sieci trakcyjne do prędkości 160 km/h. Nowe odcinki sieci trakcyjnej, projektowane do prędkości maksymalnej 200 km/h, montowane na linii E65, nie przeszły dotychczas weryfikacji w eksploatacji [5, 7].
Źródło:
TTS Technika Transportu Szynowego; 2012, 10; 31-33
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Catenary image enhancement method based on curvelet transform with adaptive enhancement function
Autorzy:
Wu, Changdong
Powiązania:
https://bibliotekanauki.pl/articles/327578.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
catenary image
enhancement
curvelet transform
coefficient structure
adaptive function
sieć trakcyjna
awaria
diagnostyka
transformata curvelet
Opis:
In the process of catenary failure diagnosis system based on image processing technique, some catenary images present low contrast, which need to be enhanced. Curvelet transform has the high directional sensitivity and anisotropy, which is suitable for image enhancement because of its optimal sparse representation of image with rich details and edges. First, the catenary image is decomposed by Curvelet transform to get its high and low frequency coefficients, then adjust the high frequency coefficients using the enhancement function. Afterwards, combine the high frequency coefficients and low frequency coefficients by the inverse Curvelet transform, and thus to get the enhanced catenary image. In this paper, Curvelet transform is compared with the traditional enhancement methods. The experimental results show that the proposed method can effectively enhance the low contrast catenary images, the catenary insulator, arm, hanger, pillar and locator part become visible, the details become more obvious. Moreover, as for the online application of catenary failure diagnosis system, efficiency is another important consideration. The experimental results also show that the cost time of catenary image enhancement is within a few tens of seconds, which meets the requirements of catenary failure diagnosis system.
Źródło:
Diagnostyka; 2019, 20, 2; 3-10
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza wpływu odległości między pantografami na drgania kolejowej sieci trakcyjnej
Analysis of the influence of distance between pantographs on the catenary vibrations
Autorzy:
Bryja, D.
Popiołek, A.
Powiązania:
https://bibliotekanauki.pl/articles/383498.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
symulacja drgań
drgania przewodu jezdnego
siła nacisku stykowego
interakcja sieć jezdna – pantografy
vibration simulation
catenary vibrations
contact force
pantograph-catenary dynamic interaction
Opis:
W artykule przedstawiono wyniki kolejnego etapu badań dynamiki kolejowej sieci trakcyjnej obciążonej ruchem pantografów, wykonywanych za pomocą autorskiej metody symulacji drgań sprzężonego układu pantografy – sieć trakcyjna. Przeanalizowano wpływ prędkości ruchu oraz odległości pomiędzy pantografami na drgania przewodu jezdnego oraz na siłę nacisku stykowego ślizgacza pantografu na przewód jezdny. Do analiz wybrano trzy rozstawy pantografów oraz pięć prędkości. Przeanalizowano charakter zjawiska na podstawie przebiegów czasowych wielkości wyjściowych oraz miar statystycznych. Zidentyfikowano możliwość wystąpienia niekorzystnych kombinacji warunków obciążenia sieci, skutkujących zwiększeniem niekorzystnych zjawisk dynamicznych. Sformułowano wnioski do dalszych badań.
The article presents the results of the current stage of study on the catenary dynamics, based on the author's method of simulation of pantograph – catenary system vibrations. The influence of the speed of movement and the distance between pantographs on the vibration of contact wire and the contact force has been analyzed. Three pantographs' distances and five speeds were chosen for the analyzes. The nature of the phenomenon was analyzed on the basis of time histories of the output quantities and statistical measures. The possibility of unfavorable combinations of load conditions, leading to an increase of undesirable dynamic behavior, has been identified. Conclusions for further research have been formulated.
Źródło:
Archiwum Instytutu Inżynierii Lądowej; 2017, 25; 75-85
1897-4007
Pojawia się w:
Archiwum Instytutu Inżynierii Lądowej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie struktur dyskretno-ciągłych przy wymuszeniu impulsowym
Simulation of dynamics of the catenary - pantograph system
Autorzy:
Kumaniecka, A.
Powiązania:
https://bibliotekanauki.pl/articles/404216.pdf
Data publikacji:
2010
Wydawca:
Polskie Towarzystwo Symulacji Komputerowej
Tematy:
symulacja
analiza dynamiczna
układ sieć trakcyjna-odbierak prądu
simulation
dynamical analysis
catenary-pantograph system
Opis:
Praca dotyczy analizy dynamicznej modelu układu sieć trakcyjna – odbierak prądu. W pracy przedstawiono wyniki badań symulacyjnych współdziałania odbieraka prądu z siecią. Rozważany układ składa się z dwóch strun, modelujących linę nośną i przewód jezdny, oddziaływujących ze sobą poprzez sprężysto – tłumiące elementy. Oddziaływanie pantografu na przewód jezdny sprowadzono do harmonicznie zmieniającej się siły przemieszczającej się ze stałą prędkością wzdłuż przewodu jezdnego. Układ równań stanowiący matematyczny model rozwiązano numerycznie.
In the paper the dynamical analysis model of catenary – pantograph system is provided. The results of simulation of interaction between catenary and pantograph are presented. The model for the catenary is composed of two strings (the contact and carrying cables) connected by visco-elastic elements. It was assumed that the force exerted by the pantograph is harmonic. The force moves along the contact cable at constant velocity. The set of equations of motion were solved numerically.
Źródło:
Symulacja w Badaniach i Rozwoju; 2010, 1, 3; 257-263
2081-6154
Pojawia się w:
Symulacja w Badaniach i Rozwoju
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Droppers’ stiffness influence on dynamic interaction between the pantograph and railway catenary
Autorzy:
Bryja, Danuta
Hyliński (Popiołek), Adam
Powiązania:
https://bibliotekanauki.pl/articles/215741.pdf
Data publikacji:
2019
Wydawca:
Instytut Kolejnictwa
Tematy:
railway catenary
pantographs
droppers’ slackening
geometrical non-linearity
vibration simulation
validation of simulation method
Opis:
Droppers connecting the contact wire and messenger wire of the railway catenary are characterized by zero or negligible compressive stiffness, hence they become slack under compression that is similar to bars’ buckling. The paper presents a numerical analysis of the influence of droppers slackening phenomenon on the dynamic interaction between the pantograph and catenary. The analysis is based on a simulation method presented by the authors in previous papers, in which the catenary is modelled as a complex cable system. In this paper, the simulation method is modified by introducing the residual compressive stiffness of droppers that is assumed as a given percent of tensile stiffness. Modification leads to geometrically non-linear equations of motion of the pantograph-catenary system. Two different algorithms for solving the problem of non-linearity are proposed, in both of them the Newmark numerical integration method is applied. Results of dynamic response simulations performed for different values of residual compressive stiffness of droppers are presented and compared. It is shown that the contact wire does not cooperate with the messenger wire in a large area around the pantograph when the compressive stiffness of droppers is assumed zero. As a result, the pantograph moving at high speed induces severe vibrations of the catenary. It is also shown that droppers should be designed to have the residual compressive stiffness equal to at least one percent of their tensile stiffness. This is sufficient to ensure an appropriate cooperation between messenger wire and contact wire, which is demonstrated by simulation results fulfilling requirements given in the standard PN-EN 50318: 2002.
Źródło:
Problemy Kolejnictwa; 2019, 183; 89-98
0552-2145
2544-9451
Pojawia się w:
Problemy Kolejnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie struktur dyskretno-ciągłych przy wymuszeniu impulsowym
Simulation of dynamics of the catenary-pantograph system
Autorzy:
Kumaniecka, A.
Powiązania:
https://bibliotekanauki.pl/articles/404278.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Symulacji Komputerowej
Tematy:
analiza dynamiczna
model
symulacja
układ sieć trakcyjna-odbierak prądu
dynamical analysis
simulation
catenary-pantograph system
Opis:
Praca dotyczy analizy dynamicznej modelu układu sieć trakcyjna-odbierak prądu. W pracy przedstawiono wyniki badań symulacyjnych współdziałania odbieraka prądu z siecią. Rozważany układ składa się z dwóch strun, modelujących linę nośną i przewód jezdny, oddziaływujących ze sobą poprzez sprężysto-tłumiące elementy. Oddziaływanie pantografu na przewód jezdny sprowadzono do harmonicznie zmieniającej się siły przemieszczającej się ze stałą prędkością wzdłuż przewodu jezdnego. Układ równań stanowiący matematyczny model rozwiązano numerycznie.
In the paper the dynamical analysis model of catenary-pantograph system is provided. The results of simulation of interaction between catenary and pantograph are presented. The model for the catenary is composed of two strings (the contact and carrying cables) connected by visco-elastic elements. It was assumed that the force exerted by the pantograph is harmonic. The force moves along the contact cable at constant velocity. The set of equations of motion were solved numerically.
Źródło:
Symulacja w Badaniach i Rozwoju; 2011, 2, 1; 15-21
2081-6154
Pojawia się w:
Symulacja w Badaniach i Rozwoju
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metody likwidacji sadzi i oblodzenia sieci trakcyjnej
Methods of the liquidation of the hoar Frost and ices on the overhead catenary
Autorzy:
Onderka, E.
Powiązania:
https://bibliotekanauki.pl/articles/251424.pdf
Data publikacji:
2010
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
oblodzenie
sadź
sieć trakcyjna
transport szynowy
hoarfrost
overhead catenary
rail transport
Opis:
Sadź i oblodzenie, występujące na przewodach jezdnych sieci trakcyjnej, są źródłem zakłóceń w jej normalnej pracy, powodując pogorszenie warunków współpracy odbieraka prądu z siecią oraz wpływa ujemnie na samą sieć. Elektem pogorszenia warunków odbioru prądu jest intensywne iskrzenie, które w konsekwencji prowadzi do zwiększenia zużycia zarówno przewodów jezdnych, jak i ślizgów odbieraków prądu oraz miejscowe nagrzewanie się przewodów jezdnych, prowadzące niejednokrotnie do ich przepalenia. Szczególne zagrożenie dla sieci stwarza sadź, a tym bardziej osad lodowy w miejscach rozruchu pojazdów trakcyjnych (np. w rejonie semaforów), tj. w miejscach dużego poboru prądu z sieci przez tabor.
Źródło:
TTS Technika Transportu Szynowego; 2010, 3; 58-60
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
DeepCwind semi-submersible floating offshore wind turbine platform with a nonlinear multi-segment catenary mooring line and intermediate buoy
Autorzy:
Motallebi, Mohammad
Ghassemi, Hassan
Shokouhian, Mehdi
Powiązania:
https://bibliotekanauki.pl/articles/24202503.pdf
Data publikacji:
2022
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
semi-submersible floating platform
offshore wind turbine
dynamic response
catenary mooring system
intermediate buoy
strain and tension
Opis:
In this paper, to improve the mechanical behavior of DeepCwind semi-submersible floating offshore wind turbine (FOWT) platform mooring lines, the nonlinear catenary cables of the platform were divided into multi-segment and intermediate buoys. Mathematical formulations of the boundary element method (BEM) governing the dynamics of mooring line systems with buoy devices were described. This study was applied to the OC4-DeepCwind semi-submersible FOWT platform, which is designed for a 200-meter water depth with mooring lines consisting of three catenary steel chain cables at 120° angles to each other. The dynamic response of the multi-segment catenary mooring lines with different buoy radiuses and different positions along the cables was investigated. The full-scale platform was modeled in ANSYS-AQWA software, and the simulations were performed under harsh offshore conditions. The mooring line’s general arrangement, tension, strain and uplift force for different buoy radiuses and their position along the cable are presented and discussed. Moreover, platform motions in three directions (surge, heave, and pitch) were also analyzed. It was concluded that by correctly selecting the buoy volume and position along the cable, the tension of the cable may be reduced by up to 45%. By incorrectly selecting the buoy, the results caused adverse effects.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2022, 69 (141); 20--34
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of contact gaps on the conditions of vehicles supply and wear and tear of catenary wires in a 3 kV DC traction system
Autorzy:
Maciołek, T.
Lewandowski, M.
Szeląg, A.
Steczek, M.
Powiązania:
https://bibliotekanauki.pl/articles/201789.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pantograph
overhead line
pantograph-catenary interaction
contact losses
traction drive
Opis:
Short-term contact losses between a pantograph and a contact wire are not included in the standards nor are they taken into account in evaluating pantograph-contact wire interaction. These contact losses, however, accelerate wear and tear as well as disturb operation of vehicles’ drive systems. The article presents the effects of short-term contact breaks as well as an analysis of impact of contact breakages on a vehicle’s current at 3 kV DC power supply. Results of voltage and current oscillations measured in real conditions when pantograph of a DC driven chopper vehicle was running under isolators were presented. Then a simulation model of a vehicles with ac motors and voltage inverters was derived to undertake simulation experiments verifying operation of such a vehicle in condition similar to those measured in real condition.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2020, 68, 4; 759-768
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Symulacja współpracy odbieraka prądu z siecią trakcyjną
Simulation of mating pantograph - catenary system
Autorzy:
Roman, Z.
Powiązania:
https://bibliotekanauki.pl/articles/251626.pdf
Data publikacji:
2001
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
energia elektryczna
odbierak prądu
pojazdy szynowe
sieć trakcyjna
Opis:
Wraz ze zwiększeniem prędkości jazdy pociągów wzrastają wymagania w zakresie dostawy mocy i energii elektrycznej do pojazdów trakcyjnych [14, 19]. Dostawa ta następuje za pośrednictwem przemieszczającego się styku odbieraka prądu z przewodem jezdnym sieci trakcyjnej. Aby zapewnić niezakłócony dopływ mocy i energii do pojazdu trakcyjnego, dąży się do utrzymania stałej wartości siły nacisku odbieraka prądu na sieć trakcyjną, co szczególnie w przypadku dużych prędkości jazdy staje się sprawą skomplikowaną. Optymalizacja parametrów układu odbierak-sieć wymaga więc prowadzenia badań i szczegółowych analiz.
Źródło:
TTS Technika Transportu Szynowego; 2001, 8, 7-8; 66-71
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowa generacja wysokoobciążalnych sieci trakcyjnych - YC120-2CS150 i YC150-2CS150. Cz. 5, Badania nowej sieci trakcyjnej
New generation of high loag capacity catenaries YC120-2CS150 and YC150-2CS150. Part 5, Tests of new catenary
Autorzy:
Auguściuk, M.
Powiązania:
https://bibliotekanauki.pl/articles/250737.pdf
Data publikacji:
2007
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
sieć trakcyjna
transport szynowy
catenary
rail transport
Opis:
W cyklu artykułów na łamach tts została omówiona konstrukcja I właściwości nowej generacji sieci trakcyjnych. W ostatnim z cyklu artykułów zostały przedstawione wyniki badań tej sieci.
Źródło:
TTS Technika Transportu Szynowego; 2007, 7-8; 50-55
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozjazdy sieciowe - konstrukcje i badania
The catenary switches - design and tests
Autorzy:
Kaniewski, M.
Majewski, W.
Rojek, A.
Powiązania:
https://bibliotekanauki.pl/articles/253723.pdf
Data publikacji:
2005
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
kolej
rozjazdy sieciowe
rozjazdy torowe
transport
Opis:
Na liniach zelektryfikowanych nad rozjazdami torowym muszą być umieszczane rozjazdy sieciowe, które umożliwiają przejazdy lokomotyw z podniesionym pantografem, z jednego toru na drugi tor przez tor rozjazdowy lub na wprost po torze głównym. Na PKP rozjazdy torowe, i w zwiazku z tym również sieciowe, budowane są tylko na stacjach. W innych zarządach kolejowych rozjazdy budowane są również na szlaku.
Źródło:
TTS Technika Transportu Szynowego; 2005, 3; 59-63
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The role of stray currents in the evolution of damage in transport systems
Autorzy:
Kałkowska, E
Powiązania:
https://bibliotekanauki.pl/articles/135114.pdf
Data publikacji:
2016
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
stray currents
electric currents
catenary
circuit
corrosion
erosion
resistance
Opis:
The aim of the present work is the influence of stray currents on transport systems, especially rail and city systems. Therefore, a study was conducted that simulated flow of stray currents on elements of the transportation system. Steel DOMEX, which has enhanced resistance to corrosion, was used as research material. It is rarely understood that transport systems can have reciprocal negative effects on each other. For example, the urban and long-distance rail transport systems influence the transmission systems (gas pipelines, information systems). A side effect of the functioning of railways is the formation of stray currents, which cause electrochemical corrosion in all undergrounded metal components. It has been demonstrated that the impact of stray currents on the metal parts is of corrosive nature, and their effects can be presented graphically and numerically. It has also been proven that the anodic potential causes a greater loss than the cathodic potential. Furthermore, the exposure to the elements, both in the process of corrosion and erosion, accelerates the destruction of the material.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2016, 48 (120); 134-137
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies