Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "bliźniakowanie" wg kryterium: Wszystkie pola


Wyświetlanie 1-6 z 6
Tytuł:
Effect of texture on deformation mode in magnesium and AZ61 alloy
Wpływ tekstury na mechanizmy deformacji magnezu i stopu AZ61
Autorzy:
Sułkowski, B.
Powiązania:
https://bibliotekanauki.pl/articles/264320.pdf
Data publikacji:
2018
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
magnesium
AZ61
deformation
twinning
texture simulation
Taylor factor
magnez
deformacja
bliźniakowanie
modelowanie ewolucji tekstury
współczynnik Taylora
Opis:
The effect of the initial texture on the deformation mode and mechanical properties was studied in magnesium and its AZ61 alloy. Both materials had a very similar initial texture. Two cases were investigated: samples with a texture where the basal slip system was blocked, and samples having a texture where the basal slip system was allowed to activate. The samples were deformed by compression at room temperature at a strain rate of 10−3 s−1. It was found that the initial texture had a very strong impact on the deformation mode in magnesium; however, there was no effect of the initial texture on the deformation mode in the case of AZ61. The investigations were compared to simulations of texture evolution using the Taylor model. From the simulations, the Taylor factor and slip system activity were obtained. It was found that, in the case of magnesium, twinning or slip (both basal and non-basal) are the two main deformation modes, while in the case of AZ61, slip is the only main deformation mechanism despite the initial texture. The impact of the initial texture is discussed in more detail in the present study.
W pracy badano wpływ początkowej tekstury na mechanizmy deformacji i właściwości mechaniczne magnezu i stopu magnezu AZ61. Zbadano dwa przypadki: próbki, w których bazalny system poślizgu został zablokowany, oraz próbki, w których bazalny system poślizgu mógł być aktywowany. Próbki odkształcano przez ściskanie w temperaturze pokojowej z prędkością odkształcania 10-3 s-1. Stwierdzono, że początkowa tekstura miała bardzo silny wpływ na sposób deformacji magnezu; jednak w przypadku AZ61 nie zauważono podobnego efektu wpływu początkowej tekstury na właściwości mechaniczne. Badania porównano z symulacjami ewolucji tekstury za pomocą modelu Taylora. Z symulacji uzyskano współczynnik Taylora i aktywności systemów poślizgu. Stwierdzono, że w przypadku magnezu, w zależności od początkowej tekstury, poślizg (zarówno w bazalnym systemie, jak i niebazalnych systemach poślizgu) oraz bliźniakowanie są dwoma głównymi mechanizmami deformacji, natomiast w przypadku AZ61 głównym mechanizmem deformacji, pomimo początkowej tekstury, jest tylko poślizg.
Źródło:
Metallurgy and Foundry Engineering; 2018, 44, 2; 91-100
1230-2325
2300-8377
Pojawia się w:
Metallurgy and Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda emisji akustycznej w badaniach plastyczności metali, stopów i kompozytów
Autorzy:
Pawełek, A.
Powiązania:
https://bibliotekanauki.pl/articles/273956.pdf
Data publikacji:
2014
Wydawca:
Roble
Tematy:
metoda emisji akustycznej
plastyczność materiałów
pasma ścinania
bliźniakowanie
efekt Portevina-Le Chateliera
acoustic emission method
plasticity
shear bands
twinning
Portevin-Le Chatelier effect
Źródło:
LAB Laboratoria, Aparatura, Badania; 2014, 19, 3; 6-15
1427-5619
Pojawia się w:
LAB Laboratoria, Aparatura, Badania
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure of warm worked Zircalloy-4
Mikrostruktura stopu Zircalloy-4 przetwarzanego w podwyższonych temperaturach
Autorzy:
Paul, H.
Darrieulat, M.
Vanderesse, N.
Lityńska, L.
Miszczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/353449.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Zircalloy-4
mikrostruktura
cząstki drugiej fazy
deformacja cieplna
bliźniakowanie
microstructure
twinning
second phase particles
hot deformation
Opis:
The microstructure of commercial purity Zircalloy-4 (Zry-4) compressed at temperatures 650°C and 750°C up to strains of 0.8 was characterized over a wide range of scales, using optical metallography, scanning (SEM) and transmission (TEM) electron microscopy. The typical microstructure after warm deformation consisted of the α-phase matrix and the second phase particles (SPP) enriched in Fe and Cr. Two kinds of these particles were observed. The large isolated SPP were situated along boundaries of lamellae of α-phase, whereas very fine intermetallic particles were nearly homogeneously distributed inside the lamellae. The intensity of recrystallization was main factor deciding on microstructure development in this material. The efficiency of that process increased quite rapidly with temperature or decreasing strain rate. The appearance of twins was the second important feature of the "warm deformed" structure with the prevailing {1102} - type system of twins. They were occasionally observed in all samples after the deformation at 650°C and 750°C temperatures.
W pracy dokonano wieloskalowej charakterystyki mikrostruktury stopu Zircalloy-4 przerabianego plastycznie w zakresie pośrednich temperatur, tj. 650°C-750°C, w zakresie odkształceń logarytmicznych do 0.8, z wykorzystaniem technik mikroskopii optycznej oraz skaningowej i transmisyjnej mikroskopii elektronowej. W obrazie mikrostruktury obserwowano płytki fazy α oraz wydzielenia cząstek drugiej fazy wzbogaconoej w Fe oraz Cr. Obserwowano dwa typy wydzieleń. Duże izolowane cząstki usytuowane były wzdłuż granic płytek fazy α, podczas gdy wydzielenia dyspersyjne rozmieszczone były równomiernie w strukturze stopu. Głównym parametrem który decydował o zróżnicowaniu w strukturze stopu była intensywność zachodzenia procesu rekrystalizacji, która silnie uzależniona była od temperatury i prędkości odkształcenia. Drugim istotnym zjawiskiem obserwowanym po odkształceniu w obydwu temperaturach było pojawienie się obszarów zbliźniaczonych, przy czym dominował system zbliźniaczenia na płaszczyźnie {1102}.
Źródło:
Archives of Metallurgy and Materials; 2010, 55, 4; 1007-1019
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect Of Strain Rate On The Mechanical Properties And Microstructure Of The High-Mn Steel After Dynamic Deformation Tests
Wpływ prędkości odkształcenia na właściwości i strukturę stali wysokomanganowej po testach deformacji dynamicznej
Autorzy:
Jabłońska, M. B.
Śmiglewicz, A.
Niewielski, G.
Powiązania:
https://bibliotekanauki.pl/articles/958229.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high-manganese steel
dynamic deformation test
strain rate
impact strength
mechanical twinning
structure
stal wysokomanganowa
testy deformacji dynamicznej
prędkość odkształcenia
siła uderzenia
bliźniakowanie mechaniczne
struktura
Opis:
The paper presents results of dynamic tensile investigations of high-manganese Fe – 20 wt.% Mn – 3 wt.% Al – 3 wt.% Si – 0.2 wt.% steel. The research was carried out on a flywheel machine, which enables to perform dynamic tensile tests and impact bending with a linear velocity of the enforcing element in the range of 5÷40 m/s. It was found that the studied steel was characterized by very good mechanical properties. Strength of the tested materials was determined in the static tensile test and dynamic deformation test, while its hardness was measured with the Vickers hardness test method. The surface of fractures that were created in the areas where the sample was torn were analyzed. These fractures indicate the presence of transcrystalline ductile fractures. Fractographic tests were performed with the use of a scanning electron microscope. The structure was analyzed by light optical microscopy. Substructure studies revealed occurrence of mechanical twinning induced by high strain rates. A detailed analysis of the structure was performed with the use of a transmission scanning electron microscope STEM.
W pracy przedstawiono wyniki wstępnych badań dynamicznego rozciągania wysokomanganowej stali gatunku X20MnAlSi16-3-3. Badania przeprowadzono na młocie rotacyjnym, który posiada możliwość realizacji prób dynamicznego rozciągania i udarowego zginania w zakresie prędkości liniowej elementu wymuszającego od 5÷40 m/s. Badana stal charakteryzuje się bardzo dobrymi właściwościami mechanicznymi. Wyniki badań uzyskano na podstawie statycznej próby rozciągania, próby dynamicznego rozciągania na młocie rotacyjnym oraz pomiaru twardości metodą Vickersa. Przeanalizowano powierzchnie przełomów powstałych w miejscu zerwania podczas prób rozciągania, które wskazują na obecność przełomów transkrystalicznych ciągliwych. Badania strukturalne wykonano z wykorzystaniem techniki mikroskopii świetlnej, skaningowej mikroskopii elektronowej i skaningowej transmisyjnej mikroskopii elektronowej. Przeprowadzone badania substruktury ujawniły obecność mechanizmu bliźniakowania mechanicznego, indukowanego w warunkach dużych prędkości odkształcenia.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2A; 577-580
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of plastic deformation rate at room temperature on structure and mechanical properties of high-Mn austenitic Mn-Al-Si 25-3-3 type steel
Autorzy:
Borek, W.
Lis, M.
Gołombek, K.
Sakiewicz, P.
Piotrowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/378652.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
high-Mn steel
TWIP type steel
plastic deformation
twinning
dynamic deformation
structure
mechanical properties
stal wysokomanganowa
stal TWIP
odkształcenie plastyczne
bliźniakowanie
odkształcenie dynamiczne
struktura
własności mechaniczne
Opis:
Purpose: The aim of the paper is to determine influence of plastic deformation rate at room temperature on structure and mechanical properties of high-Mn austenitic Mn-Al-Si 25-3-3 type steel tested at room temperature. Design/methodology/approach: Mechanical properties of tested steel was determined using Zwick Z100 static testing machine for testing with the deformation speed equal 0.008 s-1, and RSO rotary hammer for testing with deformation speeds of 250, 500 and 1000s-1. The microstructure evolution samples tested in static and dynamic conditions was determined in metallographic investigations using light microscopy as well as X-ray diffraction. Findings: Based on X-ray phase analysis results, together with observation using metallographic microscope, it was concluded, that the investigated high-Mn X13MnAlSiNbTi25-3-3 steel demonstrates austenitic structure with numerous mechanical twins, what agrees with TWIP effect. It was demonstrated, that raise of plastic deformation rate produces higher tensile strength UTS and higher conventional yield point YS0.2. The UTS strength values for deformation rate 250, 500 and 1000 s-1 grew by: 35, 24 and 31%, appropriately, whereas in case of YS0.2 these were: 7, 74 and 130%, accordingly, in respect to the results for the investigated steel deformed under static conditions, where UTS and YS0.2 values are 1050 MPa and 700 MPa. Opposite tendency was observed for experimentally measured uniform and total relative elongation. Homogeneous austenitic structure was confirmed by X-ray diffractometer tests. Research limitations/implications: To fully describe influence of strain rates on structure and mechanical properties, further investigations specially with using transmission electron microscope are required. Practical implications: Knowledge about obtained microstructures and mechanical properties results of tested X13MnAlSiNbTi25-3-3 steel under static and dynamic conditions can be useful for the appropriate use of this type of engineering material in machines and equipment susceptible to static or dynamic loads. Originality/value: The influence of plastic deformation at room temperature under static and dynamic conditions of new-developed high-manganese austenitic X13MnAlSiNbTi25-3-3 steels were investigated.
Źródło:
Archives of Materials Science and Engineering; 2019, 96, 1; 22-31
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena możliwości poprawy właściwości trakcyjnych opon w warunkach drogi leśnej
Evaluation of possibility to improve tyres traction properties under the forest road conditions
Autorzy:
Białczyk, W.
Cudzik, A.
Czarnecki, J.
Pieczarka, K.
Powiązania:
https://bibliotekanauki.pl/articles/288489.pdf
Data publikacji:
2006
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
właściwości trakcyjne
siły trakcyjne
opony
bliźniakowanie opon
łańcuchy antypoślizgowe
forest road
traction forces
traction properties
tyres
double tyres
chain tyres
Opis:
W pracy zaprezentowano wyniki badań trakcyjnych opon w warunkach drogi leśnej. Badaniami objęto klasyczną oponę rolniczą o wymiarze 4.00–10 oraz oponę typu Grass o wymiarze 18x8.50-8. Ocenę możliwości poprawy właściwości trakcyjnych wymienionych opon przeprowadzono w oparciu o badania trakcyjne prowadzone dla opon zbliźniakowanych a dla opon typu Grass poprzez zastosowanie łańcuchów antypoślizgowych. Wielkościami mierzonymi była siła jazdy generowana w warunkach drogi leśnej oraz wielkość deformacji poziomej podłoża. Badania wykazały, że każda z użytych modyfikacji skutkowała poprawą właściwości trakcyjnych, tzn. uzyskiwano większe siły trakcyjne przy mniejszej deformacji poziomej niż dla opon w wersji standardowej oraz korzystniejszymi wartościami współczynników przyczepności.
This paper presents the result of investigations of traction forces generated by different tyres under the same soil conditions. The field experiment was carried out in forest road in mountainous terrain. These experiments were also carried out with double, and chain tyres. The relationship between the types of tyres (two types were used), values of vertical load (five levels of loading were used) and traction forces was investigated. The experiments showed that the use of double tyres and chain tyres is a good way to improve traction forces, and that each type of tyres reacted differently to the vertical loading.
Źródło:
Inżynieria Rolnicza; 2006, R. 10, nr 2 (77), 2 (77); 97-102
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-6 z 6

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies