Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Yang, J. H." wg kryterium: Wszystkie pola


Tytuł:
Fabrication and performance of fly ash granule filter for trapping gaseous cesium
Autorzy:
Park, J. J.
Shin, J. M.
Yang, J. H.
Park, G. I.
Powiązania:
https://bibliotekanauki.pl/articles/147633.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
fabrication
gaseous cesium
granule filters
performance test
pyroprocessing
trapping
Opis:
Although a disk-type fly ash filter has shown a good performance in trapping gaseous cesium, it has difficulty in charging filters into a filter container and discharging waste filters containing radioactive cesium from a container by remote action. To solve the difficulty of the disk-type fly ash filter, five types of granule filters, including a ball type, tube type, and sponge-structure type have been made. Among them, the best filter type was chosen through simple crucible tests. The five types of granule filters packed into containers were loaded into five alumina crucibles of 50 cc. Five grams of CsNO3 was used as a gaseous cesium source. They were then placed in a muffle furnace and heated to 900°C and maintained for 2 hours. After the experiment, the weights of the cesium trapped filters were measured. Among the five types of granule filters, the sponge-structure type granule filter was the best, which has the highest trapping capacity of cesium. Its capacity is 0.42 g-Cs/g-filter. The chosen sponge-structure type granule filters and disk-type filters have been tested using a two-zone tube furnace. Cs volatilization and Cs trapping zones were maintained at 900 and 1000°C, respectively. Sixteen grams of CsNO3 was used as a gaseous cesium source. The cesium trapping profile of the sponge-structure type granule filters was almost similar to that of the disk-type fly ash filters. For both cases, cesium was successfully trapped within the third filter.
Źródło:
Nukleonika; 2015, 60, No. 3, part 2; 565-570
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Feature extraction of molten pool for laser welding quality real-time inspection
Autorzy:
Zhang, J
Yin, H
Huang, H
Yang, R
Yang, J
Li, Y
Powiązania:
https://bibliotekanauki.pl/articles/173597.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
laser materials processing
process monitoring and control
image analysis
Opis:
This paper proposed an image feature extraction method for laser welding molten pool inspection based on cellular neural network. TC4 titanium alloy thin plates were welded by Nd:YAG pulsed laser. A coaxial machine vision system was designed to acquire molten pool images. An auxiliary lighting source was employed to improve the molten pool image quality. By analyzing molten pool images, the welding defects such as fenestration or insufficient depth were identified. These results can be used as a feedback signal for laser power control. Experimental results showed that the proposed method can be used to improve laser welding quality.
Źródło:
Optica Applicata; 2015, 45, 4; 523-533
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fruit biomechanics based on anatomy: a review
Autorzy:
Li, Z.
Yang, H.
Li, P.
Liu, J.
Wang, J.
Xu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/24093.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Opis:
Fruit biomechanics is needed for quality determination, multiscale modelling and engineering design of fruit processes and equipments. However, these determined fruit biomechanics data often have obvious differences for the same fruit or tissue. In order to investigate it, the fruit biomechanics based on anatomy was reviewed in this paper. First, the anatomical characteristics of fruit biomaterials were described at the macroscopic ‘tissue’ level and microscopic ‘cellular’ level. Subsequently, the factors affecting fruit biomechanics based on anatomy and the relationships between fruit biomechanics, texture and mechanical damage were summarised according to the published literature. Fruit biomechanics is mainly affected by size, number and arrangement of cells, quantity and volume of intracellular spaces, structure, thickness, chemical composition and permeability of cell walls, and pectin degradation level and turgor pressure within cells based on microanatomy. Four test methods and partial determined results of fruit biomechanics were listed and reviewed. The determined mechanical properties data of fruit are only approximate values by using the existing four test methods, owing to the fruit biomaterials being non-homogeneous and living. Lastly, further aspects for research on fruit biomechanics were proposed for the future.
Źródło:
International Agrophysics; 2013, 27, 1
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zero-Bias Anomaly in Magnetic Tunnel Junctions
Autorzy:
Yang, H.
Yang, S.
Ilnicki, G.
Martinek, J.
Parkin, S.
Powiązania:
https://bibliotekanauki.pl/articles/1536909.pdf
Data publikacji:
2010-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.21.La
73.23.-b
73.22.-f
Opis:
We present experimental results, which may indicate the possibility of the coexistence of the Kondo effect and ferromagnetism in macroscopic planar magnetic tunnel junctions with a layer of nanodots inside tunnel barriers. A conductance double peak structure was observed. Magnetic field dependence of the splitting of a conductance peak, and temperature evolution of the conductance curves are well explained from the theoretical point of view according to the predictions of the Kondo physics and cotunneling in the Anderson quantum dot coupled to ferromagnetic leads.
Źródło:
Acta Physica Polonica A; 2010, 118, 2; 316-318
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Photoluminescence Studies of Aluminum Nitride Nanowires
Autorzy:
Yang, J.
Na, H.
Kim, H.
Kebede, M.
Choi, R.
Jeong, J.
Lee, C.
Powiązania:
https://bibliotekanauki.pl/articles/1505466.pdf
Data publikacji:
2011-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
78.55.-m
Opis:
We report the production of AlN nanowires by the thermal heating method, for exploring their photoluminescence properties. The room-temperature photoluminescence properties were investigated with different annealing environment. While broad emissions with peaks at around 2.45 and 2.95 eV were obtained from both unannealed and annealed samples, the additional 2.1 eV peak was found from the annealed samples. We have suggested the possible emission mechanisms based on the assumption that both 2.45 eV peak and 2.1 eV peak are ascribed to the nitrogen vacancies. Annealing in N_2 environment exhibited lower intensities of 2.45 eV peak and 2.1 eV peak in comparison to those in Ar environment, presumably due to the suppression of nitrogen vacancies.
Źródło:
Acta Physica Polonica A; 2011, 119, 2; 125-127
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
$SiO_x$ Nanowires Produced on Molybdenum-Coated Si Substrates
Autorzy:
Kim, H.
Lee, J.
Yang, J.
Powiązania:
https://bibliotekanauki.pl/articles/1813396.pdf
Data publikacji:
2008-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
78.55.-m
Opis:
We synthesized $SiO_x$ nanowires with diameters of 30-140 nm, for the first time by the simple heating of the Mo-coated Si substrates. X-ray diffraction, selected area electron diffraction, and energy-dispersive X-ray spectroscopy indicated that the nanowires were in an amorphous state, comprising Si and O only. Fitting the photoluminescence spectrum with Gaussian functions revealed that the nanowires exhibited significant photoluminescence intensities near blue and green light regions. We extensively discussed the possible growth mechanism of $SiO_x$ nanowires.
Źródło:
Acta Physica Polonica A; 2008, 113, 3; 1017-1020
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis, Structure, Photoluminescence, and Raman Spectrum of Indium Oxide Nanowires
Autorzy:
Kim, H.
Na, H.
Yang, J.
Lee,, C.
Powiązania:
https://bibliotekanauki.pl/articles/1505485.pdf
Data publikacji:
2011-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
78.55.-m
Opis:
Production of indium oxide $(In_2O_3)$ whiskers at a very low temperature of 650°C was reported. The synthetic route was comprised of a thermal heating process of a mixture of In and Mg powders. We have investigated the structural properties of the as-synthesized nanowires by using X-ray diffraction and scanning electron microscopy. The product consisted of one-dimensional nanowires, with a crystalline cubic structure of $In_2O_3$. The photoluminescence measurement with the Gaussian fitting exhibited visible light emission bands centered at 2.1 eV and 2.8 eV. The peaks of the Raman spectrum were indexed to the modes being associated with cubic $In_2O_3$.
Źródło:
Acta Physica Polonica A; 2011, 119, 2; 143-145
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
HPM Generation by Tri-Anode Coaxial Vircator
Autorzy:
Shao, H.
Liu, G.
Zhang, Y.
Yang, Z.
Sun, J.
Powiązania:
https://bibliotekanauki.pl/articles/1807906.pdf
Data publikacji:
2009-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.47.Gk
Opis:
A novel type of coaxial vircator with 3 anodes is proposed. The advantages on high power microwave generation is tested by particle-in-cell simulation and theoretical analysis model is set up as well. The tri-anode coaxial vircator behaves a very stable frequency in the pulse duration. In the tri-anode coaxial vircator, the injecting electron beam is well premodulated in the first anode cavity and forms an inerratic bunch-dispersion mechanism in the second anode cavity; the energy-loss electrons penetrate through the third anode and absorbed by the dumping cavity locates in the centre electrode, which helps keeping the bunch-dispersion cycle undisturbed. A 3.8 GHz tri-anode coaxial vircator is theoretically designed and optimized by particle-in-cell simulation, which gives beam-wave conversion efficiency of over 20% with a stable predominant frequency, in accordance with the particle-in-cell simulation and analytic model.
Źródło:
Acta Physica Polonica A; 2009, 115, 6; 1047-1049
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Molecular cloning and expression analysis of CML27 in Brassica oleracea pollination process
Autorzy:
Lian, X.P.
Zeng, J.
Zhang, H.C.
Yang, X.H.
Zhao, L.
Zhu, L.Q.
Powiązania:
https://bibliotekanauki.pl/articles/19583.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Źródło:
Acta Biologica Cracoviensia. Series Botanica; 2018, 60, 2
0001-5296
Pojawia się w:
Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Surface Characteristics and Physical Properties on Biodegradable Magnesium-Calcium Alloys by Anodic Oxidation
Autorzy:
Kim, J.
Lee, J.
Yang, H.
Park, S.
Lim, H.
Oh, G.
Yun, K.
Powiązania:
https://bibliotekanauki.pl/articles/1191716.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
87.85.jj
87.85.jc
Opis:
The purpose of this study was to determine the effect of calcium (Ca) on the surface characteristics and physical properties of magnesium-calcium alloys after anodization. A novel binary alloy Mg-xCa (in which x=0.5, 1, or 5 wt.%) was cast by combining magnesium (99.9%) and calcium (99.9%) in an argon gas (99.99%) atmosphere. A magnesium alloy rod having a diameter of 15 mm was cut into discs, each 2 mm thick. The specimens were subjected to anodic oxidation at 120 V for 15 minutes at room temperature in an electrolyte solution consisting of calcium gluconate, sodium hexametaphosphate, and sodium hydroxide. Surface and cross-sectional morphological changes were observed using scanning electron microscopy, and the microstructures and phases were detected by means of X-ray diffraction. Hardness and surface roughness were assessed by means of a Vickers hardness tester and a surface roughness meter, respectively. The results show that the physical properties of these magnesium-calcium alloys have been improved, because it was possible to control the dissolution rate according to the amount of calcium added.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 736-741
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies