Wszystkie pola: Sveda, J. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Experimental testing of active feed drive
Autorzy:: Sveda, J.
Valasek, M.
Sika, Z.
Powiązania:: https://bibliotekanauki.pl/articles/1429193.pdf
Data publikacji:: 2008
Wydawca:: Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:: machine tool
testing bed
linear motor
vibration suppression
control loop
Opis:: The main disturbances of the machine tool frame are caused by operation of motion axes. Movement of high dynamic motion axes is connected with powerful force stroke that excite machine tool frame vibration and deteriorate machining surface quality and productivity. There are several possibilities how to suppress this vibration. This deals with the simulation and experimental testing of new advanced conception where the main motor is connected with the frame by an active element that is controlled by intelligent control technique.
Źródło:: Journal of Machine Engineering; 2008, 8, 4; 43-58
1895-7595
2391-8071
Pojawia się w:: Journal of Machine Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Measurement and Calibration of Machine Tools in 6 DOFs in Large Workspace
Autorzy:: Benes, P.
Valasek, M.
Sveda, J.
Powiązania:: https://bibliotekanauki.pl/articles/971210.pdf
Data publikacji:: 2009
Wydawca:: Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:: measurement
calibration
machine tool
6 DOFs
workspace
Opis:: The measurement and calibration of machine tools in the large workspace (for example 10x20x3m) and in all 6 DOFs (3 cartesian translations and 3 rotations) is not an easy task. A new device called RedCaM (Redundant Calibration and Measurement Machine) has been developed that enables simultaneously to measure all 6 DOFs in the workspace. The RedCaM machine was designed with redundant number of sensors and therefore as a parallel kinematical structure. Thus it profits from the fact that the sensor errors are not chaining. It is equipped only with the sensors and it is operated by the drives of the measured machine tool after the attachment of the platform into the machine tool spindle. The redundancy of sensors provides better accuracy, self-calibration property and very good ratio between the errors of particular sensors and the resulting error of the end effector position. This has been optimized and has proven the improved (minimized) transfer of the errors between the sensors and the position in space in 6 DOFs. In particular the used redundancy of sensors (9 sensors for 6 DOFs) enables the self-calibration (all kinematical parameters are calibrated during the first motions in the workspace) and the minimized transfer of errors between the sensors and the 6 DOFs of the platform that has been experimentally proven to be 1:1. The paper deals with the description of the modification of RedCaM for the usage in the large workspace of machine tools that are in principle unlimited.
Źródło:: Journal of Machine Engineering; 2009, 9, 3; 77-87
1895-7595
2391-8071
Pojawia się w:: Journal of Machine Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Simulation Testing of the Machine Tool Equipped With the Active Feed Drive
Autorzy:: Sveda, J.
Valasek, M.
Sika, Z.
Powiązania:: https://bibliotekanauki.pl/articles/971162.pdf
Data publikacji:: 2009
Wydawca:: Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:: machine tool
feed drive
control loop simulation
cutting force
vibration suppression
Opis:: The vibration of a machine tool is mainly caused by the dynamic acceleration of a motion axis and by the forces that act on it. All the disturbance forces are transmitted to the machine tool frame through the drive (motor) and its regulation loop and they excite its vibrations. Thus the achievable dynamics and machining quality is negatively influenced. There are several possibilities how to suppress the excited vibrations including the recently introduced "motor on motor" technique which is based on the serial connection of two linear motors. This paper presents new simulation results performed on the simulation model of a real machine tool. The maximal achievable tuning of the regulation loop parameters of the motion axis equipped with the "motor on motor" technique was confronted with the conventional feed drive setting. The "motor on motor" feed drive properties were also tested in the virtual machining operation mode where the real measured cutting force was used. The sensitivity analysis of the reaction force and the middle mass movement of the "motor on motor" feed drive solution to the predicted cutting force introduced to the feed drive control has been investigated. The middle mass is represented by the shared part of both linear motors which absorbs the high frequency part of the reaction force by its movement.
Źródło:: Journal of Machine Engineering; 2009, 9, 2; 81-92
1895-7595
2391-8071
Pojawia się w:: Journal of Machine Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Modelling and optimization of machine tools on foundations
Autorzy:: Novotny, L.
Sindler, J.
Fiala, S.
Sveda, J.
Powiązania:: https://bibliotekanauki.pl/articles/99779.pdf
Data publikacji:: 2016
Wydawca:: Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:: machine tools on foundations
modelling and optimization
machine subsoil
fixing elements
concrete foundation
Opis:: This paper aims to expand existing complex mathematical models of machines in a manner that would respect the influence of their installation on the foundation. For this purpose, a method of modelling and optimization of foundations was developed. It consists of four basic parts: Mathematical modelling of machines, optimization of the number and placement of fixing (levelling) elements, optimization and modelling of the reinforced concrete foundation and modelling of the subsoil with respect to engineering geological conditions. The main optimization criterion is to increase the lowest natural frequency of the machine while reducing the foundation weight (amount of reinforced concrete).The result is a virtual mathematical model of the machine tool, including the influence of its foundation and subsoil. The proposed optimization can be used for designing new machines, machine foundations and the number and distribution of machine levelling elements. This method has been applied and tested on a virtual model of a multi-purpose machining center for workpieces up to 15 tons.
Źródło:: Journal of Machine Engineering; 2016, 16, 1; 43-56
1895-7595
2391-8071
Pojawia się w:: Journal of Machine Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: ILERT - International Learning Environment for Real-Time Software-Intensive Control Systems
Autorzy:: Kornecki, A. J.
Hilburn, T. B.
Grega, W.
Sveda, M.
Thiriet, J. M.
Powiązania:: https://bibliotekanauki.pl/articles/384607.pdf
Data publikacji:: 2009
Wydawca:: Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:: real-time software Engineering
engineering Curricula
Opis:: Due to the heavily software-centric nature of modern reactive and time-critical systems, there is an increasing demand for efficient development of high quality Real-Time Software-Intensive Control systems (RSIC). The study discussed in this paper is focused on the creation of international curriculum framework centred on RSIC - this important aspect of computer-system-control-software engineering education. The study explores the mechanism for involving students from multilingual, geographically separated institutions in a coordinated educational experience. It exposes them to the problems, methods, solution techniques, infrastructure, technologies, regulatory issues, and tools in the domain of dependable real-time, safety-critical, software-intensive control systems. The ultimate objective is the creation of a model RSIC curriculum, which can be used by engineering schools both in the USA and the EU.
Źródło:: Journal of Automation Mobile Robotics and Intelligent Systems; 2009, 3, 1; 66-71
1897-8649
2080-2145
Pojawia się w:: Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Sveda, J." wg kryterium: Wszystkie pola

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język