Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Singh, A. S." wg kryterium: Wszystkie pola


Tytuł:
Thermoacoustical Excess Properties of Binary Liquid Mixtures - A Comparative Experimental and Theoretical Study
Autorzy:
Yasmin, M.
Singh, K.
Parveen, S.
Gupta, M.
Shukla, J.
Powiązania:
https://bibliotekanauki.pl/articles/1808024.pdf
Data publikacji:
2009-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
43.35.+d
62.60.+v
82.60.Lf
Opis:
Specific heat ratio (γ), pseudo-Grüneisen parameter (Γ), heat capacity $(C_p)$ and effective Debye temperature $(θ_{D})$ for binary system of tetrahydrofuran with o-cresol and methanol respectively, were calculated using the experimentally measured densities, velocities and viscosities of the pure liquids and their mixtures over the whole composition range and at T = 293, 303, 313 K. The excess pseudo-Grüneisen parameter $(Γ ^{E})$, excess molar isentropic compressibility $(K_{s}^{E})$ and excess acoustic impedance $(Z^{E})$ were also calculated. The excess deviation functions have been correlated using Redlich-Kister polynomial equation. The observed values of the excess parameters plotted against the mole fraction of tetrahydrofuran have been explained on the basis of intermolecular interaction suggesting strong interaction in tetrahydrofuran + o-cresol than in tetrahydrofuran + methanol. Partial molar isentropic compressibility at infinite dilution and their excess values were calculated for each component. Sanchez theory, Goldsach-Sarvas volume fraction statistics, Sudgen's relation, Flory-Patterson-Rastogi and Brock and Bird model were used with the Aurebach relation to compute theoretically the values of ultrasonic velocities at varying temperatures. The velocity deviations were estimated in terms of average percentage deviations. Internal pressure for both the systems were calculated theoretically and discussed on the basis of relative applicability of the models in theoretical estimations. The isothermal compressibility $(k_T)$, for these binary mixtures were theoretically evaluated by using the Flory statistical theory and five hard sphere models and compared with the experimental values.
Źródło:
Acta Physica Polonica A; 2009, 115, 5; 890-900
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ethnobotanical investigation of significant seasonal medicinal weeds of Toba Tek Singh District, Punjab, Pakistan
Autorzy:
Tufail, M.
Hussain, K.
Nawaz, K.
Iqbal, I.
Arshad, N.
Shahzadi, A.
Javed, A.
Nazeer, A.
Bashir, Z.
Qurban, M.
Zeb, J.
Ali, S.S.
Powiązania:
https://bibliotekanauki.pl/articles/2049359.pdf
Data publikacji:
2021
Wydawca:
Instytut Włókien Naturalnych i Roślin Zielarskich
Tematy:
weeds
ethnobotany
flora
survey
chwasty
etnobotanika
badanie
Opis:
Introduction: Medicinal plants are found throughout the world but most are considered weeds. They are – directly or indirectly – the major source of medicines in pharmaceutical and herbal industries. Formulations used to prepare medicines or the method of use for these plants are mainly based on folk or traditional knowledge. This folk knowledge is not documented in many areas and needs to be explored. Objectives: This study was aimed to enlist the seasonal weed species with traditional medicinal usage in Toba Tek Singh District, Punjab, Pakistan. Methods: Field surveys were arranged in winter and summer 2019–2020 to enlist the important medicinal weeds and traditional knowledge of the local community. Data collected were as follows: local name of weed, medicinal use, method and part used. Results: Numerous wild perennial, biennial and annual plants were identified, 30 of them were ethnomedicinally important in the local community. They were grouped in 16 families. It was found that whole weed is used in many prescriptions (37%). Achyranthes aspera L. (Amaranthaceae) was the most common weed used in treating fevers, respiratory problems and asthma. Cichorium intybus L. (Asteraceae) was used in summer drinks to reduce thirst, improve digestion and liver function. Chenopodium album L. (Amaranthaceae) was used with 0.71 UV and 0.147 RFC values. Medicago polymorpha L. (Fabaceae) was used to treat kidney, intestinal and bladder infections. Its UV was 0.65 and RFC was 0.121. Tribulus terrestris L. (Zygophyllaceae) was used in impotency treatment, and in the removal of kidney stones and urinary tract infections treatment. It has 0.63 UV and 0.21 RFC values. This weed also showed the highest Fidelity Level (FL) (77%), as compared to other weeds. Conclusion: It was concluded that there are many significant medicinal weeds in the Toba Tek Singh District, Punjab, Pakistan that are used in traditional medicines in treating various disorders. These plants also showed herbal or pharmacological importance that can be used to develop medicine at commercial scale.
Źródło:
Herba Polonica; 2021, 67, 2; 29-38
0018-0599
Pojawia się w:
Herba Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal creep stress and strain analysis in a non-homogeneous spherical shell
Autorzy:
Thakur, P.
Singh, S. B.
Pathania, D. S.
Verma, G.
Powiązania:
https://bibliotekanauki.pl/articles/949332.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
stress
strain rates
thermal
spherical shell
non-homogeneous
Opis:
The purpose of this paper is to present study of thermal creep stress and strain rates in a non-homogeneous spherical shell by using Seth’s transition theory. Seth’s transition theory is applied to the problem of creep stresses and strain rates in the non-homogeneous spherical shell under steady-state temperature. Neither the yield criterion nor the associated flow rule is assumed here. With the introduction of thermal effect, values of circumferential stress decrease at the external surface as well as internal surface of the spherical shell. It means that the temperature dependent materials minimize the possibility of fracture at the internal surface of the spherical shell. The model proposed in this paper is used commonly as a design of chemical and oil plants, industrial gases and stream turbines, high speed structures involving aerodynamic heating.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 4; 1155-1165
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optical Investigation of the Cu Ions Diffusion into Bulk Lithium Niobate
Autorzy:
Sugak, D.
Syvorotka, I.
Yakhnevych, U.
Buryy, O.
Martynyuk, N.
Ubizskii, S.
Zhydachevskyy, Ya.
Suchocki, A.
Kumar, H.
Janyani, V.
Singh, G.
Powiązania:
https://bibliotekanauki.pl/articles/1030967.pdf
Data publikacji:
2018-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
66.30.-h
78.20.-e
Opis:
Spatial changes of optical properties of bulk LiNbO₃ crystal were investigated after annealing in CuO powder. The incorporation of copper ions into the crystal was confirmed by registration of additional absorption spectra that revealed formation of the absorption bands of both Cu⁺ (400 nm) and Cu²⁺ (1000 nm) ions. The changes of optical absorption caused by thermal treatment were registered along the direction of diffusion by the probe beam perpendicular to this direction. The anisotropy of diffusion was revealed. The maxima were observed on the depth dependences of additional absorption both for the wavelengths of 400 and 1000 nm for all main crystallographic directions. The concentrations of copper ions were calculated in accordance with the Smakula-Dexter formula. The X-ray diffraction study revealed reflexes which probably belong to CuNb₂O₆, CuNbO₃ and CuO. The halo was observed on these diffraction patterns that confirms the formation of the scattering centers (about 1 nm in diameter) in the near-surface region.
Źródło:
Acta Physica Polonica A; 2018, 133, 4; 965-972
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Towards use of dijkstra algorithm for optimal navigation of an unmanned surface vehicle in a real-time marine environment with results from artificial potential field
Autorzy:
Singh, Y.
Sharma, S.
Sutton, R.
Hatton, D.
Powiązania:
https://bibliotekanauki.pl/articles/116058.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
autonomous vehicles
dijkstra’s algorithm
Unmanned Surface Vehicle (USV)
port of portsmouth
Artificial Path Planning (APF)
Artificial Potential Field
real-time marine environment
optimal navigation
Opis:
The growing need of ocean surveying and exploration for scientific and industrial application has led to the requirement of routing strategies for ocean vehicles which are optimal in nature. Most of the op-timal path planning for marine vehicles had been conducted offline in a self-made environment. This paper takes into account a practical marine environment, i.e. Portsmouth Harbour, for finding an optimal path in terms of computational time between source and end points on a real time map for an USV. The current study makes use of a grid map generated from original and uses a Dijkstra algorithm to find the shortest path for a single USV. In order to benchmark the study, a path planning study using a well-known local path planning method artificial path planning (APF) has been conducted in a real time marine environment and effectiveness is measured in terms of path length and computational time.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2018, 12, 1; 125-131
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of inertia in the steady state pressurised flow of a non-Newtonian fluid between two curvilinear surfaces of revolution: Rabinowitsch fluid model
Autorzy:
Singh, U. P.
Gupta, R.S.
Kapur, V.K.
Powiązania:
https://bibliotekanauki.pl/articles/185617.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
efekt bezwładności
łożysko krzywoliniowe
zewnętrzny przepływ ciśnieniowy
curvilinear bearings
Rabinowitsch fluid model
inertia effect
externally pressurized flow
Opis:
In many practical situations fluids are normally blended with additives (viscosity index improvers, viscosity thickeners, viscosity thinners) due to which they show pseudoplastic and dilatant nature which can be modelled as cubic stress model (Rabinowitsch model). The cubic stress model for pseudoplastic fluids is adopted because Wada and Hayashi have shown that the theoretical results with this model are in good agreement with the experimental results. The present theoretical analysis is to investigate the pseudoplastic effect along with the effect of rotational inertia on the pressure distribution, frictional torque and fluid flow rate of externally pressurised flow in narrow clearance between two curvilinear surfaces of revolution. The expression for pressure has been derived using energy integral approach. To analyse and discuss the effects of pseudoplasticity and fluid inertia on the pressure distribution, fluid flow rate and frictional torque, the examples of externally pressurised flow in the clearance between parallel disks and concentric spherical surfaces have been considered.
Źródło:
Chemical and Process Engineering; 2011, 32, 4; 333-349
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bioremediation of melanoidin contamination in distillery effluent using Aspergillus brasiliensis
Autorzy:
Singh, T.A.
Singh, T.
Singh, R.
Pandey, P.K.
Gaur, R.
Jamal, F.
Patel, S.K.
Bansal, S.
Powiązania:
https://bibliotekanauki.pl/articles/2097092.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
spent wash
effluent
melanoidin
bioremediation
decolorization
Opis:
The current investigation is the first report of utilization of Aspergillus brasiliensis for the decolorization of melanoidin in distillery effluent. The effluent generated from alcohol distilleries is one of the most complex wastewater with a high biological oxygen demand (BOD) and other organic, inorganic, and toxic constituents. The effluent contains melanoidin, a dark brown compound, which is difficult to remediate by using conventional technologies. The disposal of spent wash in the natural environment is hazardous and can deteriorate land and water resources. The decolorization of spent wash through physical and chemical methods remains unsuitable, and the only alternative to decolorize spent wash is biological treatment. In the current study, three fungal strains were isolated from the distillery waste and screened for their ability to decolorize melanoidin.The isolate RS2 exhibited maximum decolorization of 83% and was identified as Aspergillus brasiliensis. Its optimum growth temperature was 37EC, and the maximum efficiency was recorded after 120 h of incubation. Nutritional sources were investigated for the fungi showing the maximum decolorization of melanoidin, and starch and peptone were found to be the best carbon and nitrogen sources, respectively. At 1.5% starch concentration and 1.5% peptone concentration, the decolorization level attained was 87.45% and 88.74%, respectively. A. brasiliensis exhibited a high potential to decolorize melanoidin. The decolorization percentage was high, which makes this fungus a potential candidate for use at the industrial scale for the bioremediation of spent wash.
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2020, 101, 3; 205-213
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Customer’s perception towards Change Management in Insurance sector – A Case Study of LIC of India
Autorzy:
Singh, Shriti
Powiązania:
https://bibliotekanauki.pl/articles/1192689.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Change
Change Management
Privatization
Insurance
Services
Customers etc.
Opis:
After a Decade of privatization in insurance sector in India, Customers of LIC believes that LIC is still in leading position in insurance sector. LIC win the trust of majority of the customers LIC of India doesn’t charge any hidden charges and due to government organization LIC succeeds to provide feeling of security to their customer. A descriptive study is conducted among the customers of the LIC of India from different branches in Bhopal. The objective of this research is to study the perception of customers about the change management (Privatization) and impact of the change management on the services provided by LIC of India to their customers. Chi Square test is applied in this paper to check the authenticity of data given by the respondents. The findings suggests that the change management can be implemented through Planning and Implementation, Decision making, transparency in policies, by creating opportunities for development etc
Źródło:
World Scientific News; 2016, 46; 126-144
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reliability analysis and prediction for time to failure distribution of an automobile crankshaft
Analiza niezawodności i przewidywanie rozkładu czasu do uszkodzenia wału korbowego pojazdu samochodowego
Autorzy:
Singh, S. S. K.
Abdullah, S.
Mohamed, N. A. N.
Powiązania:
https://bibliotekanauki.pl/articles/301436.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
reliability
time to failure
monotonic function
hazard rate
niezawodność
czas do uszkodzenia
funkcja monotoniczna
wskaźnik zagrożenia
Opis:
This paper emphasizes on analysing and predicting the reliability of an automobile crankshaft by analysing the time to failure (TTF) through the parametric distribution function. The TTF was modelled to predict the likelihood of failure for crankshaft during its operational condition over a given time interval through the development of the stochastic algorithm. The developed stochastic algorithm has the capability to measure the parametric distribution function and validate the predict the reliability rate, mean time to failure and hazard rate. T, the algorithm has the capability to statistically validate the algorithm to obtain the optimal parametric model to represent the failure of the component against the actual time to failure data from the local automobile industry. Hence, the validated results showed that the three parameter Weibull distribution provided an accurate and efficient foundation in modelling the reliability rate when compared with the actual sampling data. The suggested parametric distribution function can be used to improve the design and the life cycle due to its capability in accelerating and decelerating the mechanism of failure based on time without adjusting the level of stress. Therefore, an understanding of the parametric distribution posed by the reliability and hazard rate onto the component can be used to improve the design and increase the life cycle based on the dependability of the component over a given period of time. The proposed reliability assessment through the developed stochastic algorithm provides an accurate, efficient, fast and cost effective reliability analysis in contrast to costly and lengthy experimental techniques.
W prezentowanej pracy przedstawiono metodę analizy oraz predykcji niezawodności wału korbowego pojazdu samochodowego opartą na analizie czasu do uszkodzenia (TTF) z wykorzystaniem funkcji rozkładu parametrycznego. W artykule, stworzono model TTF pozwalający na przewidywanie prawdopodobieństwa uszkodzenia wału korbowego w stanie pracy w danym przedziale czasu za pomocą nowo opracowanego algorytmu stochastycznego. Opracowany algorytm stochastyczny umożliwia mierzenie funkcji rozkładu parametrycznego oraz weryfikację przewidywanego współczynnika niezawodności, średniego czasu do uszkodzenia oraz współczynnika zagrożenia. Algorytm daje możliwość statystycznej weryfikacji modelu w odniesieniu do rzeczywistych danych dotyczących czasu do uszkodzenia pochodzących z lokalnego przemysłu samochodowego. Weryfikacja taka pozwala na otrzymanie optymalnego modelu parametrycznego reprezentującego uszkodzenie części składowej. Zweryfikowane wyniki wykazały, że trójparametrowy rozkład Weibulla stanowi dokładne i wydajne narzędzie do modelowania współczynnika niezawodności w zestawieniu z rzeczywistymi danymi z próby. Proponowaną dystrybuantę parametryczną można wykorzystywać do doskonalenia konstrukcji oraz cyklu życia wału korbowego ponieważ daje ona możliwość przyspieszania i zwalniania mechanizmu uszkodzenia, na podstawie czasu, bez potrzeby regulacji poziomu naprężenia. Zatem, znajomość rozkładu parametrycznego oraz obliczonych na jego podstawie współczynników niezawodności i zagrożenia omawianego elementu mechanizmu korbowego, pozwala na doskonalenie konstrukcji oraz wydłużenie cyklu życia wału korbowego w oparciu o dane dotyczące jego niezawodności w danym okresie czasu. Proponowana metoda oceny niezawodności z wykorzystaniem opracowanego w artykule algorytmu stochastycznego umożliwia dokładną, wydajną, szybką i tanią analizę niezawodności w odróżnieniu od kosztownych i czasochłonnych technik eksperymentalnych.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 3; 408-415
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Static, vibration and buckling analysis of skew composite and sandwich plates under thermo mechanical loading
Autorzy:
Singh, S. K.
Chakrabarti, A.
Powiązania:
https://bibliotekanauki.pl/articles/264605.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
metoda elementów skończonych
obciążenie cieplne
płyta warstwowa
skew plate
finite element
refined theory
thermal load
Opis:
Static, vibration and buckling behavior of laminated composite and sandwich skew plates is studied using an efficient C0 FE model developed based on refined higher order zigzag theory. The C0 FE model satisfies the interlaminar shear stress continuity at the interfaces and zero transverse shear stress conditions at plate top and bottom. In this model, the first derivatives of transverse displacement have been treated as independent variables to overcome the problem of C1 continuity associated with the plate theory. The C0 continuity of the present element is compensated in the stiffness matrix formulation by adding a suitable term. In order to avoid stress oscillations observed in the displacement based finite element, the stress field derived from temperature is made consistent with the total strain field by using field consistent approach. Numerical results are presented for different static, vibration and buckling problems by applying the FE model under thermo mechanical loading, where a nine noded C0 continuous isoparametric element is used. It is observed that there are very few results available in the literature on laminated composite and sandwich skew plates based on refined theories. As such many new results are also generated for future reference.
Źródło:
International Journal of Applied Mechanics and Engineering; 2013, 18, 3; 887-898
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
First report of the earthworm Pontoscolex corethrurus (Müller, 1857) from Punjab, India
Autorzy:
Singh, S.
Singh, J.
Sharma, A.
Pal Vig, A.
Shakoor, A.
Powiązania:
https://bibliotekanauki.pl/articles/11913.pdf
Data publikacji:
2018
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Źródło:
International Letters of Natural Sciences; 2018, 68
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Interaction of Physical and Mental Work
Autorzy:
Singh, S.
Aghazadeh, F.
Ray, T. G.
Powiązania:
https://bibliotekanauki.pl/articles/90541.pdf
Data publikacji:
2002
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
physical work
mental work
psychophysical methods
acceptable load limit
fatigue
praca a choroby
praca mięśni
praca umysłowa
obciążenie pracą umysłową
obciążenie fizyczne
zmęczenie
zmęczenie fizyczne
Opis:
The objective of the research was to determine the effect of mental load on the physical capacity of an individual. An experiment involving 9 combinations of lifting tasks, 1 lowering task, and 3 treadmill tasks was conducted. Heart rate was measured and maximum acceptable weight of lift was determined using the psychophysical method. A simple multiplication task was used as the mental load. The output variables were determined with and without the mental task. The results indicate that the individual’s physical capacity decreased with the mental task while lifting from floor to knuckle and shoulder to reach lifting heights.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2002, 8, 4; 451-463
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies on the effect of coal particle size on biodepyritization of high sulfur coal in batch bioreactor
Autorzy:
Singh, S.
Srichandan, H.
Pathak, A.
Gahan, Ch. S.
Lee, S.
Kim, D. J.
Kim, B. G.
Powiązania:
https://bibliotekanauki.pl/articles/778523.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
biodepyritization
coal
pyrite
stirred tank bioreactor
Opis:
The moderate thermophilic mix culture bacteria were used to depyritize the Illinois coal of varying particle sizes (-100 μm, 100-200 μm, +200 μm). Mineral libration analysis showed the presence of pyrite along with other minerals in coal. Microbial depyritization of coal was carried out in stirred tank batch reactors in presence of an iron-free 9K medium. The results indicate that microbial depyritization of coal using moderate thermophiles is an efficient process. Moreover, particle size of coal is an important parameter which affects the efficiency of microbial depyritization process. At the end of the experiment, a maximum of 75% pyrite and 66% of pyritic sulphur were removed from the median particle size. The XRD analysis showed the absence of pyrite mineral in the treated coal sample. A good mass balance was also obtained with net loss of mass ranging from 5-9% showing the feasibility of the process for large scale applications.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 1; 97-102
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
TBI Calculations of the Elastic Properties and Structural Phase Transformation in Novel Materials: Yttrium Nitride
Autorzy:
Singh, S.
Chauhan, R.
Gour, A.
Powiązania:
https://bibliotekanauki.pl/articles/1492770.pdf
Data publikacji:
2011-12
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
64.70.K-
62.20.de
62.50.-p
Opis:
We have carried out high pressure theoretical structural studies of yttrium nitride to examine the phase transition phenomena from the NaCl structure to CsCl structure by using a three-body potential model. The phase transition pressure (140 GPa) predicted by this approach is close to the phase transition pressure, predicted by others (138 GPa). Yttrium nitride is a novel and less explored material. Under high pressure yttrium nitride goes through a sudden collapse in volume showing the first order phase transition. To understand the effect of pressure we studied bulk properties, elastic constants and their combination. The pressure volume equation of state provides meaningful signatures of physical and chemical phenomena under high pressure. Moreover we have successfully checked the stability criterion for this compound.
Źródło:
Acta Physica Polonica A; 2011, 120, 6; 1021-1025
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies