Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Shang, Shang" wg kryterium: Wszystkie pola


Tytuł:
Analysis of progressive collapse of a super-long span latticed steel arch structure
Autorzy:
Guo, Shuangchao
Xu, Delin
Shang, Kaiguang
Yang, Shuo
Wang, Di
Li, Gen
Zheng, Bing
Jiao, Yong
Powiązania:
https://bibliotekanauki.pl/articles/2200875.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
progressive collapse
steel arch truss structure
compression instability
Opis:
The progressive collapse of a space grid structure which has a large number of members and a large span is the focus of current research. Before the progressive collapse of the structure, there is a problem of instability of the members. In this paper, dynamic nonlinear analysis of a super-long span latticed steel arch structure is carried out to study its progressive collapse process using a Kinematic Hardening Plasticity constitutive model compiled by Vumat material subprogram in Abaqus, which takes into account instability of the members. Differences in the dynamic response process of the structure at the collapse moment and the failure sequence of the members using the member stability model and the material failure constitutive model are compared. Compared with the material failure constitutive model, when the member stability constitutive model is used, the proportion of compressive buckling members in the structural failure is higher, and the bearing capacity of the structure is lower when the initial failure occurs. The structure suffers from localized member compressive failure rather than material yielding, which leads to the progressive collapse of the structure.
Źródło:
Journal of Theoretical and Applied Mechanics; 2023, 61, 1; 103--117
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of physical and physico-chemical factors on pulp rheology of smithsonite
Autorzy:
Shang, Yanbo
Sun, Chuanyao
Powiązania:
https://bibliotekanauki.pl/articles/10933093.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
smithsonite
pulp rheology
apparent viscosity
yield stress
particle agglomerate
Opis:
Pulp rheology is an important factor affecting flotation. The effects of particle size (150-74 μm, 74-38 μm, 38-23 μm, -23 μm), pulp density (11.76%-34.78%), pH (5.3-12.4), collector concentration (25-500 mg/dm3), and stirring intensity (400-900 rpm) on the rheology of smithsonite, kaolinite, quartz, and calcite minerals were investigated in detail. Additionally, the agglomerate morphology of particles was observed by a polarizing microscope. The results showed that as the mineral particle size decreased and pulp density increased, the apparent viscosity and yield stress of the pulp increased. Especially the fine mineral particles (-23 μm) presented a higher apparent viscosity and yield stress. The order of apparent viscosity and yield stress for the minerals from large to small was: kaolinite>calcite>smithsonite>quartz under different pH values, the collector concentrations, and stirring intensities. In the presence of collector of octadecylamine, smithsonite, kaolinite, and calcite particles could form aggregates, especially smithsonite particles presented obvious agglomeration with large particle size and compact network structure. The agglomeration effect of calcite and kaolinite particles were weaker than that of smithsonite. The particle agglomeration resulted in the increase of the apparent viscosity and yield stress of the pulp. Quartz particles did not form clusters, hence the pulp’s apparent viscosity and yield stress were the lowest. The research on the changes in rheological properties of the pulp will hopefully provide some guidance for future flotation.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 1; art. no. 157244
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of YSZ coatings on nickel-based alloys by anodic electrophoretic deposition
Autorzy:
Binxia, Yuan
Tianzhong, Chen
Yongzhi, Shang
Haibo, Xue
Min, Li
Powiązania:
https://bibliotekanauki.pl/articles/2204142.pdf
Data publikacji:
2023
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
YSZ coating
anodic electrophoretic deposition
suspension solution
nickel-based alloys
Opis:
In the paper, YSZ coatings were prepared on nickel-based alloy substrates by anodic electrophoretic deposition. The YSZ suspension solution was obtained under stirring and ultrasonic treatment, in which the anhydrous ethanol and acetylacetone were used as the dispersion medium and ammonium polyacrylate was used as the dispersant of the suspension. The effects of different deposition voltage and deposition time on YSZ coating were investigated. Meantime, the microstructure of the coating surface was observed by metallographic microscope. It was found that the high-quality YSZ coating could be obtained by deposition at 60 V for 2–3 min. Finally, the effect of sintering temperature on coating quality was investigated by X-ray diffractometer and scanning electron microscopy. The results showed that the YSZ coating bonded closely with the substrate after sintering at 1200 °C, and the porosity of the YSZ coating increased after sintering.
Źródło:
Polish Journal of Chemical Technology; 2023, 25, 1; 8--11
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Interface Diffusion Behavior of Co40Al-X (X = Ni, Cr, Ti) System by Diffusion Multiple
Autorzy:
Shang, Hang
Gao, Qiuzhi
Jiang, Yujiao
Ma, Qingshuang
Li, Huijun
Zhang, Hailian
Powiązania:
https://bibliotekanauki.pl/articles/2203747.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Co-Al-X system
diffusion multiple
interface
diffusion
mechanical properties
Opis:
Diffusion multiple method was applied to investigate the alloying elements distribution and interface diffusion reactions in Co-Al-X system, in order to accelerate the alloy development. The diffusion regions of Co-Al-X system at 1173 K were investigated by scanning electron microscope (SEM) and nanoindentation. SEM images show that phases of Co-Al-Ni diffusion interface consisted of β-CoAl + γ Co, γ Co, γ + γ'-(Co, Ni)3Al and γ Ni, while Co-Al-Cr diffusion interface is shaped with δ + γ + β, γ and σ region. TiNiX diffusion layer with high Ni-content was formed in Co-Al-Ti diffusion interface. The diffusion layers during diffusion multiple play an important role in mechanical properties in these alloying systems. The γ + γ' diffusion layer in Co-Al-Ni diffusion interface presented the best comprehensive performance, while the highest hardness (17.48 GPa) was confirmed in Co-Al-Cr diffusion interface due to a large number of brittle phases. Darken method was applied to determine the interdiffusion coefficients of alloying elements in pseudo-binary phase, accordingly the diffusion capacities of alloying elements can be ordered as Al > Ni > Cr in Co-based alloys.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 1; 275--286
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantitative analysis of reaction gases or exhaust using an online process mass spectrometer
Autorzy:
Wei, Fu-Qiang
Huang, Ze-Jian
Jian, You
Dai, Xin-Hua
Fang, Xiang
Jin, Shang-Zhong
Powiązania:
https://bibliotekanauki.pl/articles/27311738.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
online quantitative analysis
mass spectrometers
mathematical models
monitoring
Opis:
Online quantitative analysis of reaction gases or exhaust in industrial production is of great significance to improve the production capacity and process. A novel method is developed for the online quantitative analysis of reaction gases or exhaust using quantitative mathematical models combined with the linear regression algorithm of machine learning. After accurately estimating the component gases and their contents in the reaction gases or exhaust, a ratio matrix is constructed to separate the relevant overlapping peaks. The ratio and calibration standard gases are detected, filtered, normalized, and linearly regressed with an online process mass spectrometer to correct the ratio matrices and obtain the relative sensitivity matrices. A quantitative mathematical model can be established to obtain the content of each component of the reaction gases or exhaust in real time. The maximum quantification error and relative standard deviation of the method are within 0.3% and 1%, after online quantification of the representative yeast fermenter tail gas.
Źródło:
Metrology and Measurement Systems; 2023, 30, 2; 337--351
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rapid evaluation method of subgrade performance using Portable Falling Weight Deflectometer
Autorzy:
Bu, Bo
Shang, Huayu
Liu, Shaoping
Liu, Ke
Powiązania:
https://bibliotekanauki.pl/articles/28099149.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Opis:
The performance evaluation of new and old subgrades is critical for the quality and safety of reconstruction and extension projects. It is necessary to achieve rapid and easy performance testing. In this study, a Portable FallingWeight Deflectometer (PFWD) is chosen to rapid evaluate the performance of subgrade. First, a testing area, the reconstruction and expansion project of the Hefei to Dagudian section of the Shanghai-Shaanxi Expressway, is selected. Then, the PFWD modulus Ep of resilient tested by PFWD and the corresponding water content w and compacting degree K tested by the cutting ring method for old subgrade are obtained. And the correlation relationship between Ep and w and K is established. The performance of old subgrade can be rapid obtained by PFWD. Meanwhile, for the new subgrade, the correlation relationship between Ep and bending value L, w and K is established, and the performance can also be rapid tested by PFWD. Finally, a rapid evaluation method for the reconstruction and expansion of subgrade performance was proposed, which aims to provide technical support for ensuring construction quality and safety and provides a technical reference and a theoretical basis for the prediction of similar subgrade performance.
Źródło:
Archives of Civil Engineering; 2023, 69, 4; 619--633
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Segmentation algorithm of coal slurry foam with double-point directional extension based on the improved FCM clustering algorithm
Autorzy:
Wu, ZiHao
Huang, XianWu
Shang, HaiLi
Zhao, YuHong
Powiązania:
https://bibliotekanauki.pl/articles/2200332.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation
slime foam segmentation
FCM
clustering algorithm
double-point directional extension
segmentation effect judgment standard
Opis:
In flotation production, the visual surface information of the flotation foam reflects the flotation effects, which are closely related to the flotation conditions and directly reflect the degree of mineralization of the foam layer. In this study, it was proposed a novel and efficient segmentation algorithm to extract the edge information of slime bubbles, as the boundaries are typically blurred and difficult to segment, due to the slime bubbles sticking to each other in the slime flotation foam image. First, the improved clustering algorithm and image morphology operation were used to extract the edges of the foam spots. Second, the image morphological operations were used as a starting point to look around the foam edge points. The pseudo-edge points were then removed using a region and spatial removal algorithm. Finally, the foam edges were extracted using the double-point directed expansion algorithm. A new criterion was proposed for segmentation effect determination based on the particularity of the segmented object. The feasibility and effectiveness of the foam segmentation method were investigated by comparative experiments. The experimental results showed that the proposed algorithm could obtain the foam surface properties more accurately and provide effective guidance for flotation production.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 1; art. no. 158850
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sludge-derived biochar : a review on the influence of synthesis conditions on environmental risk reduction and removal mechanism of wastewater pollutants
Autorzy:
Lv, Ming Yi
Yu, Hui Xin
Shang, Xiao Yuan
Powiązania:
https://bibliotekanauki.pl/articles/27311557.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
adsorption
sludge biochar
AOPs
co-pyrolysis
adsorpcja
osad
biowęgiel
kopiroliza
Opis:
In the context of resource utilization, the applications of waste biomass have attracted increasing attention. Previous studies have shown that forming biochar by heat treatment of sludge could replace the traditional sludge disposal methods, and sludge biochar is proved to be efficient in wastewater treatment. In this work, the pyrolysis, hydrothermal carbonization and microwave pyrolysis methods for preparing sludge biochar were reviewed, and the effects of different modification methods on the performance of sludge biochar in the synthesis process were comprehensively analyzed. This review also summarized the risk control of heavy metal leaching in sludge biochar, increasing the pyrolysis temperature and use of the fractional pyrolysis or co-pyrolysis were usually effectively meathods to reduce the leaching risk of heavy metal in the system, which is crucial for the wide application of sludge biochar in sewage treatment. At the same time, the adsorption mechanism of sludge biochar and the catalytic mechanism as the catalytic material in AOPs reaction, the process of radical and non-radical pathway and the possible impacts in the sludge biochar catalytic process were also analyzed in this paper.
Źródło:
Archives of Environmental Protection; 2023, 49, 2; 3--15
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A random maintenance last model with preventive maintenance for the product under a random warranty
Autorzy:
Shang, Lijun
Zou, Anquan
Qiu, Qingan
Du, Yongjun
Powiązania:
https://bibliotekanauki.pl/articles/2173133.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
random RPRW
refund
replacement last
PM
failure frequency
Opis:
Although renewing pro-rate replacement warranty (RPRW) can help producers obtain some compensation from users, there seldom exists a two-dimensional random RPRW with a refund (2D-RRPRW with R) where a refund can guarantee the fairness of users. In addition, although random periodic replacement last (RPRL) can extend the service span after the expiry of the warranty, RPRL considering preventive maintenance (PM) has been seldom modeled to further lengthen the service span after the expiry of the warranty. In view of these, a 2D-RRPRW with R is devised to guarantee the fairness of users by integrating the limited job cycles and a refund into RPRW. Under the case where 2D-RRPRW with R warrants products with job cycles, a RPRL with PM is modeled to further lengthen the service span after the expiry of the warranty and reduce the failure frequency. It shows that to shorten the warranty period can makes the warranty cost of 2D-RRPRW with R to be less than the warranty cost of classic RPRW; and the performance of RPRL with PM outperforms the performance of classic RPRL.
Źródło:
Eksploatacja i Niezawodność; 2022, 24, 3; 544--553
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Branch-Weight Unique Trees
Autorzy:
Shang, Jen-Ling
Powiązania:
https://bibliotekanauki.pl/articles/32361727.pdf
Data publikacji:
2022-05-01
Wydawca:
Uniwersytet Zielonogórski. Wydział Matematyki, Informatyki i Ekonometrii
Tematy:
branch-weight
branch-weight sequence
branch-weight unique
tree
spider
Opis:
A branch at a vertex x in a tree is a maximal subtree containing x as an endvertex. The branch-weight of x is the maximum number of edges in any branch at x. The branch-weight sequence of a tree is the multiset consisting of the branch-weights of all vertices arranged in nonincreasing order. Non-isomorphic trees may have the same branch-weight sequence. A tree T is said to be branch-weight unique in a family of trees if T is uniquely determined in the family by its branch-weight sequence. A spider is a tree in which exactly one vertex has degree exceeding two. It is known that spiders are branch-weight unique in the family of spiders but not in the family of all trees. In this study, a necessary and sufficient condition is obtained whereby a spider may be branch-weight unique in the family of all trees. Moreover, two types of trees are proposed to be branch-weight unique in the family of all trees.
Źródło:
Discussiones Mathematicae Graph Theory; 2022, 42, 2; 405-416
2083-5892
Pojawia się w:
Discussiones Mathematicae Graph Theory
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterizing the bacterial community during aerobic stabilization of livestock manure. Why should feedstock not be aged before composting?
Autorzy:
Byun, Seokjong
Lee, Chang-Jun
Kim, Sungpyo
Kim, Jun-Young
Kang, Soo-Mee
Cha, Shang-Wha
Kim, Hyun-Chul
Powiązania:
https://bibliotekanauki.pl/articles/2032946.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
aerobic bacteria
animal faeces
composting
aerobic stabilization
bakterie tlenowe
odchody zwierzęce
kompostowanie
stabilizacja areobowa
Opis:
The compositions of bacterial communities and populations during aerobic stabilization of livestock manure have been investigated, focusing on how the aging of feedstock affected the bacterial diversity of the composting mass. The livestock manure was divided into two groups – aged and fresh, and then used to prepare the feedstock with additives. Composting experiments were carried out for 15 days using a pilot-scale batch reactor with vacuum-induced aeration. Two different aeration rates were applied to the batch reactor, and their effectiveness was evaluated. Changes in total heterotrophic bacteria count and moisture content were monitored. The associated changes in bacterial community compositions were characterized using 16S ribosomal ribonucleic acid (rRNA) gene sequencing. The Firmicutes in the fresh manure decreased from 48 to 13% for the first ten days, and the dominant phylum shifted to the Proteobacteria (29%), Bacteroidetes (23%), Actinobacteria (20%), and others(15%). Under the given conditions, the use of relatively fresh manure was essential to preserve thediverse bacterial populations in the feedstock and enhance the bacterial diversity during aerobic stabilization.More research should be performed to investigate the degradability of emerging contaminants (e.g., antibiotics) in livestock manure using an engineered composting system providing well-controlled environmental conditions.
Źródło:
Environment Protection Engineering; 2021, 47, 1; 41-51
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Joint Formation and Mechanical Properties of 2060 Aluminum Alloy Refill Friction Stir Spot Welding Joint
Autorzy:
Shang, Zhen
Zuo, Yingying
Ji, Shude
Wang, Yue
Chai, Peng
Powiązania:
https://bibliotekanauki.pl/articles/2049424.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
refill friction stir spot welding
2060 aluminum alloys
plunge depth
defect characteristics
mechanical properties
Opis:
Refill friction stir spot welding (RFSSW) was used to weld the 2060 aluminum alloy with 2 mm thickness. Joint formation, defect characteristics and mechanical properties were investigated. Results show that stir zone (SZ) is clarified into dynamic recrystallization zone (DRZ) and heat extruded zone (HEZ) due to different microstructural features. The size of void near the hook tip decreases with the increase of the plunge depth. Different hook morphologies are obtained under different plunge depths. The tensile-shear load of joint with the void defect initially decreases and then increases with increasing plunge depth. The mean loads of joints under different plunge depths are in the range of 5.1-5.8 kN. The void separates the hook from lap interface, so the cracks initiating from the hook propagate along the sleeve retreating path. The hook has a larger influence on the tensile-shear load of joint than void. All the tensile specimens present a shear-plug fracture mode.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 1; 153-161
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on the foam behavior of amine reagents adsorbed at gas-liquid and gas-liquid-solid interfaces
Autorzy:
Shang, Kaixuan
Xie, Weimin
He, Dongsheng
Benzaazoua, Mostafa
Chen, Fei
Aleksandrova, Tatiana N.
Powiązania:
https://bibliotekanauki.pl/articles/1448537.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
foam
amine kind
stability
foaming property
foam structure
Opis:
Alkyl amines are widely used as cationic collectors in flotation. In this work, the flotation foaming behaviors of alkyl amines, including dodecylamine (DDA), di-n-hexylamine (DHA), octadecylamine (ODA), oleylamine (OLA), in the presence or absence of quartz were investigated by a new approach, “foam analyzer”. The effects of pH, reagent dosage, concentration of quartz powder, and particle size on foaming property and stability of bubble were explored, and the physical model of foam structure evolution was established. The adsorption mechanism of amines on quartz surface was studied from molecular structure, surface tension, zeta potential, charging mode, and adsorption form. The results show the foam stability of four amine collectors as follows: OLA > ODA > DHA > DDA. In the range of pH=6-10, the foam properties of the four amines are better. Under the same conditions, the longer carbon chain of aliphatic amine, the more unsaturated bonds, the fewer hydrogen atoms of the amine group, and the corresponding foam properties are better. When the concentration of quartz powder is 8-10%, the foaming and stability of the foam of four kinds amines are the best, The finer quartz powder particle size, the more stable the amine foam and the stronger the foamability.
Źródło:
Physicochemical Problems of Mineral Processing; 2021, 57, 1; 192-205
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Critical Conditions and Kinetics Required for Dynamic Recrystallization in a High-Carbon Tool Steel
Autorzy:
Zhang, Yong-Ji
Wu, Guang-Lian
Wu, Shang-Wen
Powiązania:
https://bibliotekanauki.pl/articles/2049419.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high-carbon steel
critical conditions
dynamic recrystallization
work-hardening
kinetics model
Opis:
A hot compression test was conducted on a Gleeble-3500 thermo-simulation machine to study the critical conditions and kinetics of dynamic recrystallization in a high-carbon tool steel. The critical conditions for the initiation of dynamic recrystallization were determined using the working-hardening theory. The quantitative relationship between the critical characteristics of dynamic recrystallization and the hot deformation parameters were elucidated based on two different methods: the apparent method and physically based method. It was found that the two methods both have high applicability for the investigated steel, but the physically-based method needs less parameters and makes it possible to study the effect of different factors. A dynamic recrystallization kinetics model was used to calculate the recrystallization volume fraction under different conditions. The calculation results matched well with the data obtained from the flow curves.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 1; 119-125
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The post-warranty random maintenance policies for the product with random working cycles
Autorzy:
Shang, Lijun
Wang, Haibin
Wu, Cang
Cai, Zhiqiang
Powiązania:
https://bibliotekanauki.pl/articles/2038106.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
random working cycle
warranty
post-warranty reliability
replacement last
replacement first
Opis:
Advanced sensors and measuring technologies make it possible to monitor the product working cycle. This means the manufacturer’s warranty to ensure reliability performance can be designed by monitoring the product working cycle and the consumer’s post-warranty maintenance to sustain the post-warranty reliability can be modeled by tracking the product working cycle. However, the related works appear seldom in existing literature. In this article, we incorporate random working cycle into warranty and propose a novel warranty ensuring reliability performance of the product with random working cycles. By extending the proposed warranty to the post-warranty maintenance, besides we investigate the postwarranty random maintenance policies sustaining the post-warranty reliability, i.e., replacement last (first) with preventive maintenance (PM). The cost rate is constructed for each post-warranty random maintenance policy. Finally, sensitivity of proposed warranty and investigated polices is analyzed. We discover that replacement last (first) with PM is superior to replacement last (first).
Źródło:
Eksploatacja i Niezawodność; 2021, 23, 4; 726-735
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies