Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kowalski" wg kryterium: Wszystkie pola


Tytuł:
Aerodynamic measurements micro air vehicle
Autorzy:
Zyluk, A.
Sibilski, K.
Kowalski, M.
Wiśniowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/243837.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
construction of micro air vehicles
aerodynamic measurements
Opis:
In present times, constructions of micro air vehicles arouse more and more interest researchers and manufacturers. Air turbulence is perceived as a major problem for Micro Air Vehicles (MAV) in outdoor applications. According to the literature, short duration vertical gusts may have velocity comparable to MAV airspeed, so brief periods of flight at very large angles of attack have to be considered. In these circumstances, it seems reasonable to apply the design with as high stall angle of attack as possible. In particular, the flow has to be attached to control surfaces to perform effective control in order to damp air turbulence effect. Therefore, an aircraft configuration was developed with cranked delta wing and propeller located inside the wing contour. To prove the value of the concept, wind tunnel experiment was undertaken. The prototype demonstrated ability to fly controllably at extremely high angles of attack. Moreover we present few disadvantages of these construction for example it was very sensitive to the motor settings, since every rpm change required immediate airplane trimming to maintain straight path of flight. This drawback can be eliminated by application of counter-rotating propeller. The status of the program is presented in the paper, including the most recent results, as well as currently undertaken experiments and plans for the nearest future.
Źródło:
Journal of KONES; 2015, 22, 4; 343-353
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Quantum Key as the Fiber Optic Security Sensor
Autorzy:
Życzkowski, M.
Kowalski, M.
Powiązania:
https://bibliotekanauki.pl/articles/1399414.pdf
Data publikacji:
2013-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
42.30.Sy
02.60.-x
42.30.Tz
Opis:
The paper describes the methodology of identifying an interference in the optical fiber. The paper presents the technology widely known as quantum key distribution. The quantum key distribution is based on the technique of constant comparison of quantum characteristics of the input light source and its characteristics at the end of the fiber optic. Methodology of presented work includes the evaluation of the functional objectives through the constructive assumptions for the laboratory models development. This paper presents the model of a system based on the comparison of polarization states of light quanta using two asymmetric Mach-Zender interferometers as transmitting and receiving systems to enable compensation of polarization state changes at the input and output of the fiber optics sensing cable. Continuous monitoring of the state of the reference signal, the specific changes of natural or ambient effects on the fiber will attempt to identify interference in the optical waveguide as a change of the polarization of the quantum states of the light. The authors indicate the possibility of using such fiber optic sensor as a security sensor to protect the extensive critical infrastructure facilities. In this article the future research conception of using compressed sensing algorithms for data compression in quantum key distribution systems is presented.
Źródło:
Acta Physica Polonica A; 2013, 124, 3; 606-609
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Czułość detekcji zmian struktury w stali NDT SHM w transporcie
Sensitivity of the detection of structural changes in steel NDT SHM in transport
Autorzy:
Żurek, Zbigniew Hilary
Stokłosa, Zbigniew
Chmiela, Bartosz
Idziak, Paweł
Kowalski, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/303611.pdf
Data publikacji:
2019
Wydawca:
Wydawnictwo Druk-Art
Tematy:
NDT
SHM
transport
bezpieczeństwo
railway transport
safety
Opis:
Metody defektoskopowe dedykowane szczególnie do diagnozowania deformacji i degradacji elementów stalowych wymagają szczegółowych badań parametrów magnetycznych i elektrycznych. W opracowaniu zamieszczono wybrane wyniki badań dotyczących możliwości wykrywania zmian strukturalnych za pomocą metod indukcyjnych. Z grupy metod indukcyjnych opisano badania polegające na rozdziale i szczególnej interpretacji przebiegu składowych impedancji w funkcji pulsacji pola magnetycznego w układzie współrzędnych kartezjańskich, unormowanych według zależności F. Förstera. W wybranych zakresach częstotliwości możliwa jest diagnostyka zarówno stanu powierzchni, jak i głębszych warstw materiału. Zainteresowanie badaniami nieniszczącymi, analizą rozwoju defektu oraz skutecznym i wczesnym wykrywaniem nastąpiło po katastrofie kolejowej w Eschede.
Flaw detection are especially dedicated to diagnosing structures of their deformation and degradation require detailed tests of parameters magnetic and electric. The study includes selected results research related to the possibility of detecting structural changes with the help of induction methods. Inductive methods have been described in research involving chapter and special interpretation of the course of impedance components in function magnetic field pulsation in the Cartesian coordinate system according to F. Förster. In selected frequency ranges, it is possible to identify surfaces and deeper layers of material up to 8 mm. The sensitivity of defect detection using these dependencies is discussed. Effective detection of defects in transport took place several years after (Eschede).
Źródło:
Napędy i Sterowanie; 2019, 21, 1; 66-73
1507-7764
Pojawia się w:
Napędy i Sterowanie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magneto - sprężystość w stalach krzemowych diagnostyka struktury i defektu - eksperyment
Magneto-elasticity in silicon steels structure and defect diagnostics - an experiment
Autorzy:
Żurek, Zbigniew Hilary
Chmiela, Bartosz
Idziak, Paweł
Kowalski, Krzysztof
Wolnik, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/1196818.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
naprężenia resztkowe
defekty materiału
struktury
nadzór eksploatacyjny
NDT
SHM
CM
F. Förster znormalizowane składowe impedancji
wykresy Förstera
residual stresses
material defects
F. Förster normalized impedance components
Foresters Plot
Opis:
Silicone sheets for electrical purposes are made for their intended purpose. In transformer magnetic circuits, the sheet structure is designed due to the compatibility of the direction of magnetization with the direction of the induction vector. These are oriented metal sheets (for example, anisotropic transformer sheets). In drives that convert the energy of a magnetic field into rotational motion, we use plates with a non-oriented structure (NGOs — for example, isotropic or generator sheets). Design defects resulting from cutting or cutting (using any methods that affect the deformation of the magnetization direction, regardless of the cutting methods used.) This process includes magneto-elastic and backward effects, known as the Vilary and Joule effects. tests prepared from silicon steel sheet M130 in the material, electrical and mechanical fields, as well as NDT (non-destructive testing) and SHM (Structural health monitoring), monitoring the state of structures SHM, and monitoring the state (Condition Monitoring - CM).
Blachy krzemowe o zastosowaniach elektrotechnicznych są produkowane ze względu na przeznaczenie. W obwodach magnetycznych transformatorów struktura blach jest projektowana ze względu na zgodność kierunku magnesowania z kierunkiem wektora indukcji. Są to blachy o strukturze zorientowanej (GO - e.g. anisotropic transformer sheets). W napędach przetwarzających energię pola magnetycznego na ruch obrotowy stosujemy blachy o strukturze niezorientowanej (NGO - e.g. isotropic or generator sheets). Defekty struktury będące wynikiem cięcia lub wycinania (dowolnymi technikami mają wpływ na deformację kierunkumagnesowania bez względu na stosowane techniki cięcia. W procesie tym uczestniczą zjawiska magnetosprężyste i odwrotne, znane jako efekty Vilariego i Joule’a. W artykule opisano kierunkowe zmiany magnesowania na dwóch modelach testowych przygotowanych z blachy krzemowej M130 w obszarze materiałowym, elektrotechnicznym i mechanicznym, a także w obszarze badań nieniszczących NDT (Non-destructive testing) i SHM (Structural health monitoring) monitorowanie stanu strukturalnego SHM, a także monitorowanie stanu w procesie eksploatacji (ang. Condition Monitoring - CM).
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2019, 1, 121; 97-104
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Miniaturowy defektoskop rezonansowy dla diagnostyki wstępnej w transporcie szynowym. Pomiary magnetyczne i magnetoindukcyjne
Resonance defector for elementary diagnostics in railway transport magnetic and magnetic-dynamic measurements
Autorzy:
Żurek, Z. H.
Idziak, P.
Kowalski, K.
Peruń, G.
Powiązania:
https://bibliotekanauki.pl/articles/972707.pdf
Data publikacji:
2018
Wydawca:
Wydawnictwo Druk-Art
Tematy:
NDT
SHM
transport kolejowy
bezpieczeństwo
railway transport
security
Opis:
Trwałość (i niezawodność) podzespołów jest podstawowym celem zapewnienia ważnego aspektu bezpieczeństwa (security and safety). W transporcie szynowym po katastrofie w Eschede stosuje się ulepszone techniki badań w zakresie ultradźwięków i prądów wirowych, tzn. stosuje się głowice wieloczujnikowe, automatyzację badań, złożoną obróbkę cyfrową sygnału i archiwizację wyników badań. W artykule przedstawiono przykłady detekcji powierzchniowej materiału w zakresie metod magnetycznych, magnetoindukcyjnych aż po rezonans magnetyczny. Badania te pozwalają stwierdzić obecność stref o znacznych zmianach magnetycznych materiału, sugerujących zmiany ciągłości struktury, często powiązane z procesem pękania. Przedstawione urządzenia można stosować manualnie lub półautomatycznie. Ze względu na niski koszt przedstawionych rozwiązań i ich nowatorstwo są warte dalszego rozwijania we współpracy z koleją.
The durability (and reliability) of the components is the main goal of providing an important aspect of safety (safety and security). On railway transport after the Eschede disaster, we use an improved test method in the field of ultrasonic and eddy currents. Multisensor heads, test automation, complex digital signal processing and archiving test results are used. The article presents examples of surface detection of material in the field of magnetic methods, magnetic induction and magnetic resonance. Many solutions can improve the safety of the chassis by detecting areas with significant magnetic changes in the material. Differentiation of the signal level indicates a change in the continuity of the structure, which is often associated with a close process of cracking. The presented devices can be used manually or semi-automatically. Because of the low cost of the solutions presented and their innovativeness, it is worth continuing to develop from cooperation with the railway.
Źródło:
Napędy i Sterowanie; 2018, 20, 11; 124-129
1507-7764
Pojawia się w:
Napędy i Sterowanie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efficacy of the use of the McKenzie and Vojta methods to treat discopathy-associated syndromes in the pediatric population
Autorzy:
Żurawski, Arkadiusz
Kiebzak, Wojciech
Zmyślna, Anna
Pogożelska, Justyna
Kotela, Ireneusz
Kowalski, Tomasz J.
Śliwiński, Zbigniew
Śliwiński, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/2161990.pdf
Data publikacji:
2019-02-27
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
DIERS
Vojta
McKenzie
lordosis
kyphosis
back pain
Opis:
Objectives This paper evaluates the efficacy of using the McKenzie and Vojta methods for patients with low back pain and the use of the DIERS Formetric 4D system as an objective diagnostic tool. Material and Methods The study enrolled 28 patients aged 15–17 years old. The patients were hospitalized at the Department of Orthopedics and Traumatology of the Świętokrzyskie Center for Pediatrics in Kielce with a diagnosis of back pain associated with a discopathy. The patients were rehabilitated according to the McKenzie and Vojta methods. Assessment by means of the DIERS Formetric system had taken place before the first therapy session and on the day that pain was eliminated to evaluate trunk inclination, angle of thoracic kyphosis, angle of lumbar lordosis, lateral deviation, trunk torsion, surface rotation and pelvic obliquity. Pain intensity and change in pain intensity over time were assessed by means of a numerical rating scale. Results Pain intensity was reduced to 0 over 3–12 days. The study participants demonstrated reduction in anterior trunk inclination of the mean value at 1.83°. The angle of thoracic kyphosis was also reduced by 7.95°. The angle of lordosis increased by 7.6°. The lateral spinal curvature was reduced by 8.92 mm. There was a reduction of 4.64° in trunk torsion. Surface rotation was reduced by 1.61° and pelvic obliquity was reduced by 3.78°. Conclusions In discopathic patients, postural parameters comprising trunk inclination, angle of thoracic kyphosis, angle of lumbar lordosis, lateral deviation, trunk torsion, vertebral rotation and pelvic obliquity fail to reach Hartzmann’s physiological reference ranges. A therapeutic intervention based on the Vojta and McKenzie methods may normalize the posture to physiological reference ranges and is effective in the treatment of patients with back pain. The DIERS system is an objective tool for tracing the effects of therapy in patients with back pain. Int J Occup Med Environ Health. 2019;32(1):33–41
Źródło:
International Journal of Occupational Medicine and Environmental Health; 2019, 32, 1; 33-41
1232-1087
1896-494X
Pojawia się w:
International Journal of Occupational Medicine and Environmental Health
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Powrót
Autorzy:
Żuławski, Jerzy
Współwytwórcy:
Choromańska, Paulina
Mizerska, Klaudia
Kowalski, Szymon
Kopeć, Aleksandra
Sekuła, Aleksandra
Data publikacji:
2019-01-30
Wydawca:
Fundacja Nowoczesna Polska
Tematy:
Modernizm
Epika
powieść obyczajowa
Opis:
Publikacja zrealizowana w ramach projektu Wolne Lektury (http://wolnelektury.pl). Reprodukcja cyfrowa wykonana przez Fundację Nowoczesna Polska.
Źródło:
Jerzy Żuławski, Powrót. Powieść współczesna, Nakład i druk tow. akc. S.Orgelbranda Synów, Warszawa 1914.
Dostawca treści:
Wolne Lektury
Książka
Tytuł:
Search for new synthetic immunosuppressants II. Tetrazole analogues of hymenistatin I.
Autorzy:
Zubrzak, Paweł
Kociołek, Karol
Smoluch, Marek
Silberring, Jerzy
Kowalski, Marek
Szkudlińska, Barbara
Zabrocki, Janusz
Powiązania:
https://bibliotekanauki.pl/articles/1044066.pdf
Data publikacji:
2001
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
immunosuppression
cis-amide bond
1,5-disubstituted tetrazole ring
hymenistatin I
Opis:
Linear and cyclic hymenistatin I (HS I) analogues with dipeptide segments Ile2-Pro3, Pro3-Pro4 and Val6-Pro7 replaced by their tetrazole analogues Ile-Ψ[CN4]-Ala3, Pro3-Ψ[CN4]-Ala4 and Val6-Ψ[CN4]-Alawere synthesized by the solid phase peptide synthesis method and cyclized with the TBTU and/or HATU reagent. The peptides were examined for their immunosuppressive activity in the lymphocyte proliferation test (LPT).
Źródło:
Acta Biochimica Polonica; 2001, 48, 4; 1151-1154
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of physiotherapy on spinal alignment in children with postural defects
Autorzy:
Zmyślna, Anna
Kiebzak, Wojciech
Żurawski, Arkadiusz
Pogorzelska, Justyna
Kotela, Ireneusz
Kowalski, Tomasz J.
Śliwiński, Zbigniew
Śliwiński, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/2161989.pdf
Data publikacji:
2019-02-27
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
postural defects
PNF
Vojta
DIERS
physiotherapy
rehabilitation
Opis:
Objectives This paper assesses the effect of neurophysiological rehabilitation in children with postural defects on the depth of thoracic kyphosis, lateral spinal deviation and rotation of spinal motor segments. Material and Methods A total of 201 patients aged 8–15 years old with a postural defect diagnosed by medical examination were enrolled. The analyzed parameters were determined using the DIERS system before the first therapeutic session and after 4 weeks of therapy. The angle of thoracic kyphosis, lateral deviation of the spine and spinal rotation were assessed. The therapy employed techniques associated with the proprioceptive neuromuscular facilitation (PNF) and Vojta’s approaches. The results were analyzed separately for both sexes and for patients rehabilitated solely with Vojta’s techniques vs. patients rehabilitated according to combined Vojta’s and PNF techniques. The χ² test was used for statistical analyses, at p < 0.05. Results There was improvement in the angle of thoracic kyphosis, ranging from 0.14 (among boys with kyphosis < 42°) to 5.47 (among girls with kyphosis ≥ 42°), spinal rotation, from 0.37 (among boys with kyphosis ≥ 42°) to 4.33 (among patients with kyphosis ≥ 42° rehabilitated solely according to Vojta’s method), and lateral deviations, ranging from 1.32 mm (among boys with kyphosis < 42°) to 2.99 mm (among patients with kyphosis ≥ 42° rehabilitated solely according to Vojta’s method). Conclusions Neurophysiological rehabilitation of patients with postural defects produced positive effects by improving the angle of thoracic kyphosis, spinal rotation and lateral deviation of the spine. Children with reduced thoracic kyphosis achieved less improvement in the kyphosis angle, lateral spinal deviation and spinal rotation than children with kyphosis ≥ 42°. The DIERS Formetric System enables precise monitoring of therapeutic outcomes. Int J Occup Med Environ Health. 2019;32(1):25–32
Źródło:
International Journal of Occupational Medicine and Environmental Health; 2019, 32, 1; 25-32
1232-1087
1896-494X
Pojawia się w:
International Journal of Occupational Medicine and Environmental Health
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Load of the hydrostatic slipper in axial piston pumps
Obciazenie stopek hydrostatycznych maszyn wielotloczkowych osiowych
Autorzy:
Zloto, T.
Kowalski, K.
Powiązania:
https://bibliotekanauki.pl/articles/793539.pdf
Data publikacji:
2011
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
piston pump
hydrostatic slipper
hydraulic piston machine
reliability
twisting moment
working pressure
mathematical relationship
MathCad software
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2011, 11
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oil leaks intensity in variable-height gaps
Natężenie przepływu przecieków oleju w szczelinach o zmiennej wysokości
Autorzy:
Zloto, T.
Kowalski, K.
Powiązania:
https://bibliotekanauki.pl/articles/792722.pdf
Data publikacji:
2013
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
variable height gap
hydraulic machine
Navier-Stokes equation
hydraulic oil
oil leakage
flow intensity
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2013, 13, 2
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oil pressure distribution in conical ring gaps
Rozklady cisnienia oleju w szczelinach pierscieniowych stozkowych
Autorzy:
Zloto, T.
Kowalski, K.
Powiązania:
https://bibliotekanauki.pl/articles/793712.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
piston-cylinder pump
pressure distribution
oil pressure distribution
conical ring gap
piston pump
hydraulic motor
Navier-Stokes equation
viscosity
hydraulic system
computational model
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 2
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oil pressure distribution in variable height gaps
Rozklady cisnienia oleju w szczelinach plaskich o zmiennej wysokosci
Autorzy:
Zloto, T.
Kowalski, K.
Powiązania:
https://bibliotekanauki.pl/articles/792863.pdf
Data publikacji:
2011
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
variable height gap
pressure distribution
hydraulic oil
hydraulic machine
Navier-Stokes equation
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2011, 11C
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pressure distributions in oil film in the front gap of a hydrostatic thrust bearing
Rozklady cisnienia w filmie olejowym szczeliny czolowej lozyska hydrostatycznego wzdluznego
Autorzy:
Zloto, T.
Kowalski, K.
Powiązania:
https://bibliotekanauki.pl/articles/793238.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
hydrostatic thrust bearing
pressure distribution
oil film
Navier-Stokes equation
geometrical dimension
exploitation parameter
front gap
geometrical parameter
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 2
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies