Wszystkie pola: Han, J. Y. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Selective reduction of PbSO4 to PbS with carbon and flotation treatment of synthetic galena
Autorzy:: Zheng, Y.-X.
Liu, W.
Qin, W.-Q.
Han, J.-W.
Yang, K.
Luo, H.-L.
Powiązania:: https://bibliotekanauki.pl/articles/110717.pdf
Data publikacji:: 2015
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: wastes
lead sulfate
reduction
carbon
lead sulfide
flotation
Opis:: In order to recover lead from the zinc leaching residues, a new technology involving selective reduction of lead sulfate to lead sulfide with carbon followed by flotation was investigated. The reduction thermodynamics of PbSO4 was discussed and the effects of molar ratio of C to PbSO4, reaction temperature and time were examined by thermogravimetry (TG) and XRD. Verification tests were further carried out to prove the conclusions of thermodynamic and TG analyses, and the transformation extent could reach 86.45% under the optimal roasting conditions. The prepared galena was then subjected to micro-flotation tests, and the highest lead recovery could reach up to 75.32%.
Źródło:: Physicochemical Problems of Mineral Processing; 2015, 51, 2; 535-546
1643-1049
2084-4735
Pojawia się w:: Physicochemical Problems of Mineral Processing
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: The Interaction of Water with Glycine: A Combined Inelastic Neutron Scattering and Raman Spectra Studies
Autorzy:: Zhang, P.
Zhang, Y.
Han, S.
Yan, Q.
Li, J.
Powiązania:: https://bibliotekanauki.pl/articles/2044762.pdf
Data publikacji:: 2006-03
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 36.20.Ng
87.64.Je
25.40.Fq
82.30.Rs
Opis:: The vibrational dynamics of water around glycine was investigated by using Raman spectroscopy and inelastic neutron scattering. Experiments of deuterated glycine versus deuterium were performed as comparison. The study shows that for glycine, the exchange of proton-deuteron on the active NH$\text{}_{3}^{+}$ side was easy, whereas there was hardly exchange on the CH$\text{}_{2}$ side. Comparing different proportion of glycine vs. water molecules we obtained that the presence of water hardly changes the main features of glycine illustrating its hydrophobic character. The intralayer hydrogen bonds of glycine crystal are difficult to be replaced due to its stronger bond than water.
Źródło:: Acta Physica Polonica A; 2006, 109, 3; 399-404
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Effect of calcination temperature on activation behaviors of coal-series kaolin by fluidized bed calcination
Autorzy:: Yuan, S.
Han, Y.
Li, Y.
Gao, P.
Yu, J.
Powiązania:: https://bibliotekanauki.pl/articles/109800.pdf
Data publikacji:: 2018
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: coal-series kaolin
fluidized bed calcination
calcination temperature
activation behaviors
Opis:: This paper is aimed at investigating activation behaviors for coal-series kaolin using fluidized bed calcination as a novel method. The properties of calcined products at different temperature by fluidized bed calcination were evaluated by determination of weight loss rate, whiteness, chemical oxygen demand (COD), aluminum dissolution degree. The thermal behaviors and reaction mechanism were characterized by thermo gravimetric-differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), particle size distribution (PSD) and scanning electron microscopy (SEM). The results showed that calcination temperature was essential factor determining the properties and crystallinity of calcined products using fluidized bed calcination. Coal-series kaolin transformed into irregular and amorphous metakaolin with excellent properties as calcined at 600-900 °C, which attributed to the dehydroxylation of kaolinite and combustion of carbon/organic matter. Calcined kaolin eliminated activity ascribed to the recrystallization into mullite when calcination temperature was over 1000 °C. It was believed that fluidized bed calcination was an efficient thermal activation technology for coal-series kaolin and the calcination temperature should be controlled accurately.
Źródło:: Physicochemical Problems of Mineral Processing; 2018, 54, 2; 590-600
1643-1049
2084-4735
Pojawia się w:: Physicochemical Problems of Mineral Processing
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: An innovative methodology for recycling iron from magnetic preconcentrate of an iron ore tailing
Autorzy:: Yu, J.
Han, Y.
Gao, P.
Li, Y.
Yuan, S.
Li, W.
Powiązania:: https://bibliotekanauki.pl/articles/110888.pdf
Data publikacji:: 2018
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: magnetic preconcentrate
iron ore tailing
iron recycling
fluidized magnetization roasting
magnetic separation
Opis:: Iron ore tailing is a kind of hazardous solid waste produced by iron and steel industry. In order to separate and recycle iron from the magnetic preconcentrate of an iron ore tailing, an innovative technological route of fluidized magnetization roasting followed by low-intensity magnetic separation was proposed in this paper. The effects of roasting temperature, dosages of reducing gas CO and fluidizing gas N2 on recovery rate of iron were carried out and optimized. The results showed that the hematite was almost reduced to magnetite by a gas mixture of 4 m3/h CO and 1 m3/h N2 at roasting temperature of 540 °C. Under the optimized conditions, a magnetic concentrate assaying 61.4 wt% Fe with a recovery rate of 81.8% was obtained from the magnetic preconcentrate of an iron ore tailing. The iron chemical phase, X-ray diffraction (XRD), and optical metallographic microscope analyses revealed that siderite was converted to magnetite successfully after roasting, and some coarse magnetite-hematite interlocking particles were formed due to insufficient reaction time, which could also be recovered by magnetic separation after liberating from gangue minerals.
Źródło:: Physicochemical Problems of Mineral Processing; 2018, 54, 3; 668-676
1643-1049
2084-4735
Pojawia się w:: Physicochemical Problems of Mineral Processing
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Identification and analysis of the SAURs in Prunus sibirica
Autorzy:: Yan, X.
Yi, R.
Bao, W.
Rula, S.
Bai, Y.
Chen, J.
Lin, Y.
Huang, H.
Han, D.
He, Y.
Powiązania:: https://bibliotekanauki.pl/articles/29430753.pdf
Data publikacji:: 2024
Wydawca:: Polska Akademia Nauk. Instytut Dendrologii PAN
Źródło:: Dendrobiology; 2024, 91; 42-55
1641-1307
Pojawia się w:: Dendrobiology
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Effect of experimental infections of various Tembusu virus strains isolated from geese, ducks and chickens on ducklings
Autorzy:: Xu, T.
Huang, X.
Li, Y.
Liu, Q.
Liu, X.
Han, K.
Liu, Y.
Yang, J.
Zhao, D.
Bi, K.
Sun, W.
Powiązania:: https://bibliotekanauki.pl/articles/2087719.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: goose-derived
duck-derived
chicken-derived
Tembusu virus
pathogenicity
Źródło:: Polish Journal of Veterinary Sciences; 2018, 21, 2; 389-396
1505-1773
Pojawia się w:: Polish Journal of Veterinary Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Annealing Study of Al/GaSb Contact with the Use of Doppler Broadening Technique
Autorzy:: Wang, H. Y.
Weng, H. M.
Ling, C. C.
Ye, B. J.
Zhou, X. Y.
Han, R. D.
Powiązania:: https://bibliotekanauki.pl/articles/2043365.pdf
Data publikacji:: 2005-05
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 78.70.Bj
68.35.Ct
73.40.Sx
Opis:: Using a monoenergetic positron beam, annealing study of the Al/n-GaSb system was performed by monitoring the Doppler broadening of the annihilation radiation as a function of the positron implanting energy. The S-parameter against positron energy data was successfully fitted by a three-layer model (Al/interface/GaSb). The annealing out of the open volume defects in the polycrystalline Al layer was revealed by the decrease in the S-parameter and the increase in the effective diffusion length of the Al layer. For the as-deposited samples, a 5 nm interfacial region with S-parameter larger than those of the Al overlayer and the bulk was identified. After the 400ºC annealing, this interfacial region extends to over 40 nm and its S-parameter dramatically drops. This is possibly due to the new phase formation at the interface. Annealing behaviors of S$\text{}_{B}$ and L$\text{}_{+,B}$ of the GaSb bulk showed the annealing out of positron traps (possibly the V$\text{}_{Ga}$-related defect) at 250ºC. However, a further annealing at 400ºC induces the formation of positron traps, which are possibly of another kind of V$\text{}_{Ga}$-related defect and the positron shallow trap GaSb antisite.
Źródło:: Acta Physica Polonica A; 2005, 107, 5; 874-879
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Reduction of Thermal Conductivity Through Complex Microstructure by Dispersion of Carbon Nanofiber in p-Type Bi0.5Sb1.5Te3 Alloys
Autorzy:: Sharief, P.
Madavali, B.
Sohn, Y.
Han, J. H.
Song, G.
Hong, S. J.
Powiązania:: https://bibliotekanauki.pl/articles/2049341.pdf
Data publikacji:: 2021
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: bismuth telluride
carbon nano fiber
grain size
Thermal conductivity
ZT
Opis:: The influence of nano dispersion on the thermoelectric properties of Bi2Te3 was actively investigating to wide-spread thermoelectric applications. Herein this report, we have systematically controlled the microstructure of Bi0.5Sb1.5Te3 (BST) alloys through the incorporation of carbon nanofiber (CNF), and studied their effect on thermoelectric properties, and mechanical properties. The BST/x-CNF (x-0, 0.05, 0.1, 0.2 wt.%) composites powder was fabricated using high energy ball milling, and subsequently consolidated the powder using spark plasma sintering. The identification of CNF in bulk composites was analyzed in Raman spectroscopy and corresponding CNF peaks were recognized. The BST matrix grain size was greatly reduced with CNF dispersion and consistently decreased along CNF percentage. The electrical conductivity was reduced and Seebeck coefficient varied in small-scale by embedding CNF. The thermal conductivity was progressively diminished, obtained lattice thermal conductivity was lowest compared to bare sample due to induced phonon scattering at interfaces of secondary phases as well as highly dense fine grain boundaries. The peak ZT of 0.95 achieved for 0.1 wt.% dispersed BST/CNF composites. The Vickers hardness value of 101.8 Hv was obtained for the BST/CNF composites.
Źródło:: Archives of Metallurgy and Materials; 2021, 66, 3; 803-808
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Morphology Change Of Si Deposit In Molten Salt Electrorefining
Zmiana morfologii osadu Si podczas elektrorafinacji w stopionych solach
Autorzy:: Ryu, H. Y.
Kwon, S. C.
Han, M. H.
An, Y. S.
Lee, J. S.
Lee, J. H.
Powiązania:: https://bibliotekanauki.pl/articles/354346.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: molten salt
silicon
morphology
electrorefining
current density
sól stopiona
krzem
morfologia
elektrorafinacja
gęstość prądu
Opis:: The effects of processing parameters on the morphology change in a Si deposit recovered by means of molten salt electrorefining are evaluated using electrochemical techniques such as cyclic voltammetry and chronopotentiometry at 800°C. It was found that concentration of K₂SiF₆ and current density were important parameters in determining deposit size. Higher concentrations of K₂SiF₆ were effective in coarsening the silicon deposit and decreasing the cell potential. Silicon nanofiber was recovered at 5 wt% of K₂SiF₆ whereas dense particles were prepared at 30 and 50 wt% of K₂SiF₆. The morphology of the Si deposit was determined by the concentration of Si in the electrolyte which is related to the formation of crystal and growth of Si. The formation mechanism of the Si deposit was interpreted by using high resolution TEM as well as electrochemical properties.
Źródło:: Archives of Metallurgy and Materials; 2015, 60, 2B; 1491-1497
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: An active fault-tolerant control framework against actuator stuck failures under input saturations
Autorzy:: Qi, X.
Theilliol, D.
He, Y.
Han, J.
Powiązania:: https://bibliotekanauki.pl/articles/331084.pdf
Data publikacji:: 2017
Wydawca:: Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:: fault tolerant control
actuator stuck failure
actuator constraints
reference redesign
linear matrix inequality
sterowanie tolerujące uszkodzenia
projekt odniesienia
liniowa nierówność macierzowa
Opis:: In this paper, a control framework including active fault-tolerant control (FTC) and reference redesign is developed subject to actuator stuck failures under input saturations. FTC synthesis and reference redesign approaches are proposed to guarantee post-fault system safety and reference reachability. Then, these features are analyzed under both actuator stuck failures and constraints before fault-tolerant controller switches. As the main contribution, actuator stuck failures and constraints are unified so that they can be easily considered simultaneously. By means of transforming stuck failures into actuator constraints, the post-fault system can be regarded as an equivalent system with only asymmetrical actuator constraints. Thus, methods against actuator saturations can be used to guarantee regional stability and produce the stability region. Based on this region, stuck compensation is analyzed. Specifically, an unstable open-loop system is considered, which is more challenging. Furthermore, the method is extended to a set-point tracking problem where the reachability of the original reference can be evaluated. Then, a new optimal reference will be computed for the post-fault system if the original one is unreachable. Finally, simulation examples are shown to illustrate the theoretical results.
Źródło:: International Journal of Applied Mathematics and Computer Science; 2017, 27, 4; 749-761
1641-876X
2083-8492
Pojawia się w:: International Journal of Applied Mathematics and Computer Science
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Development of Hydrophobic Surgical Forceps using Powder Injection Molding and Surface Treatment
Autorzy:: Park, D. Y.
Park, B. R.
Gal, C. W.
Lin, D.
Han, J. S.
Jeong, M.-S.
Bollina, R.
Hwang, W.
Park, S. J.
Powiązania:: https://bibliotekanauki.pl/articles/352093.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: powder injection molding
hydrophobic
debinding
sintering
surface treatment
Opis:: Hydrophobic surgical forceps of end-effectors for laparoscopic operations or minimally invasive surgery were developed through powder injection molding (PIM) and surface treatment. Processing conditions for mixing, debinding, and sintering were investigated to produce defect-free components. An optimum solid loading was determined by torque rheometry experiments. The optimized processing conditions for debinding and sintering were designed through the measurement of weight loss and shrinkage behavior by thermogravimetric analysis and dilatometry experiments. After producing the surgical forceps based on the optimized processing conditions via PIM, surface treatment was carried out to generate the hydrophobic structure on the surface.
Źródło:: Archives of Metallurgy and Materials; 2018, 63, 1; 473-480
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Simultaneous removal of SO2 and NOx from sintering flue gas using ammonia-Fe(II)EDTA combined with electrolytic regeneration
Autorzy:: Liang, Y.
Yao, X.
Quin, L.
Chen, W.
Han, J.
Powiązania:: https://bibliotekanauki.pl/articles/208117.pdf
Data publikacji:: 2018
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: ammonia
desulfurization
flue gases
nitrogen oxides
nitrogen removal
sintering sulfur dioxide
amoniak
odsiarczanie
gazy odlotowe
tlenki azotu
usuwanie azotu
spiekanie
ditlenek siarki
Opis:: Sulfur dioxide and nitrogen oxide are health hazardous gases, which contribute to the formation of submicron acidic particulates. To reduce SO₂ and NO_x emission from the sintering flue gas, the combination of ammonia-Fe(II)EDTA solution scrubbing with Fe(III) electrolytic regeneration is proposed. The above method has the following advantages: direct conversion of NO_x and SO₂ to harmless N₂ and SO₄ ²⁻, recovery of the by-product (NH₄)₂SO₄), simultaneous removal of NO_x and SO₂ emission from flue gas in the reactor. The effect of the pH, initial Fe(II)EDTA concentration, and voltage on the desulfurization and denitration efficiencies was investigated using a bench-scale reactor. The maximal desulfurization and denitration efficiencies were 98% and 52%, respectively. The optimum parameters were pH ˃ 5.0, 2.1 V, and 0.05 mol·dm^–3 Fe(II)EDTA concentration. SO₂ and NO_x removal from the sintering flue gas by ammonia-Fe(II)EDTA solution scrubbing combined with electrolytic regeneration was also demonstrated in a pilot-scale reactor.
Źródło:: Environment Protection Engineering; 2018, 44, 2; 19-36
0324-8828
Pojawia się w:: Environment Protection Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Identification of medicinal plant Schisandra chinensis using a potential DNA barcode ITS2
Autorzy:: Li, X.-K.
Wang, B.
Han, R.-C.
Zheng, Y.-C.
Yin, H.-B.
Xu, L.
Zhang, J.-K.
Xu, B.-L.
Powiązania:: https://bibliotekanauki.pl/articles/56996.pdf
Data publikacji:: 2013
Wydawca:: Polskie Towarzystwo Botaniczne
Tematy:: identification
internal transcribed spacer
medicinal plant
Schisandra chinensis
DNA barcode
Opis:: To test whether the internal transcribed spacer 2 (ITS2) region is an effective marker for using in authenticating of the Schisandra chinensis at the species and population levels, separately. And the results showed that the wild populations had higher percentage of individuals that had substitution of C→A at site 86-bp than the cultivated populations. At sites 10-bp, 37-bp, 42-bp and 235-bp, these bases of the Schisandra sphenanthera samples differed from that of S. chinensis. Two species showed higher levels of inter-specific divergence than intra-specific divergence within ITS2 sequences. However, 24 populations did not demonstrate much difference as inter-specific and intra-specific divergences were concerned. Both S. chinensis and S. sphenanthera showed monophyly at species level, yet the samples of different populations shown polyphyly at population level. ITS2 performed well when using BLAST1 method. ITS2 obtained 100% identification success rates at the species level for S. chinensis, with no ambiguous identification at the genus level for ITS2 alone. The ITS2 region could be used to identify S. chinensis and S. sphenanthera in the “Chinese Pharmacopoeia”. And it could also correctly distinguish 100% of species and 100% of genera from the 193 sequences of S. chinensis. Hence, the ITS2 is a powerful and efficient tool for species identification of S. chinensis.
Źródło:: Acta Societatis Botanicorum Poloniae; 2013, 82, 4
0001-6977
2083-9480
Pojawia się w:: Acta Societatis Botanicorum Poloniae
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Antioxidant activity and mechanism in flower of Hylocereus undatus (Haw.) Britt. et Rose
Autorzy:: Li, X.
Gao, Y.
Han, W.
Lin, J.
Hu, Q.
Chen, D.
Powiązania:: https://bibliotekanauki.pl/articles/19838.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:: Hylocereus undatus flower is commonly used as food or for medicinal purposes in south China. To study its antioxidant activity and mechanism we used antioxidant and chemical assays to compare two commercial samples from different locations (Shenjing, Qixing). The difference in antioxidant levels corresponded with differences in chemical content (including total phenolics, total flavonoids, kaempferol and quercetin) between Shenjing and Qixing. The antioxidant ability of H. undatus flower seems attributable to total phenolics (mainly total flavonoids). Kaempferol is one of the main bioactive components. H. undatus flower exerts its antioxidant effects through metal chelation and radical scavenging via hydrogen atom (H•) and electron (e) donation.
Źródło:: Acta Biologica Cracoviensia. Series Botanica; 2013, 55, 1
0001-5296
Pojawia się w:: Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:: Biblioteka Nauki