Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "81.65.-b" wg kryterium: Wszystkie pola


Tytuł:
Aluminium Morphological Modification by Nitrogen-Argon Mixture PIII
Autorzy:
Muñoz-Castro, A.
López-Callejas, R.
Valencia Alvarado, R.
Peña-Eguiluz, R.
Mercado-Cabrera, A.
Barocio, S.
Rodríguez-Méndez, B.
de la Piedad-Beneitez, A.
Powiązania:
https://bibliotekanauki.pl/articles/1504099.pdf
Data publikacji:
2011-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
52.40.Hf
52.77.Dq
81.65.-b
61.05.cp
62.20.Qp
68.37.Hk
Opis:
With incident fluences of ≈ $10^{12}$ atoms/$cm^2$ aluminium samples have been plasma immersion ion implanted with either pure nitrogen or argon/nitrogen mixtures at temperatures around 450°C. X-ray diffraction studies have validated the formation of the cubic phase of AlN, in samples treated with both the gas mixtures and pure nitrogen. Likewise, the presence of the hexagonal phase of AlN has been detected when either pure nitrogen or a 70%N/30%Ar mixture have been used. The signature peak of AlN has also been confirmed by the Raman spectroscopy. The maximal microhardness values were found in samples treated with the mixture. The maximal roughness was achieved with the equal part mixture in all cases, although increasing with the implantation pulse width up to a 300 nm peak at 150 μs. The latter critical value remains invariant under the pure nitrogen plasma treatment, provided that implantation periods in the order of 4.5 h are carried out.
Źródło:
Acta Physica Polonica A; 2011, 120, 1; 167-170
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Investigation on Surface and Electrical Properties of Electrical Discharge Machined AISI D2 Tool Steel
Autorzy:
Durmus, A.
Bayram, A.
Gunes, S.
Akay, S.
Powiązania:
https://bibliotekanauki.pl/articles/1182843.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
52.80.-s
81.65.-b
Opis:
The effects of pulse-on duration and finishing operation on the surface roughness and electrical resistivity of AISI D2 tool steel machined by the electrical discharge machining process are investigated. Experimental results indicate that surface roughness increased depending on the pulse-on duration. However, after the specific value, surface roughness is decreased. It can be seen that there are no notable effects of the pulse-on duration on the electrical resistivity, but the resistivity values are affected by the heat treatment and the finishing operation. Also, light microscopy and scanning electron microscopy have been used to study the characteristics of the surfaces.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 515-517
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Carbon Monolith Surface Chemistry Influence on the Silver Deposit Amount and Crystallite Size
Autorzy:
Vukčević, M.
Kalijadis, A.
Jovanović, Z.
Laušević, Z.
Laušević, M.
Powiązania:
https://bibliotekanauki.pl/articles/1503488.pdf
Data publikacji:
2011-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.U-
81.65.-b
68.35.Dv
81.15.-z
Opis:
The surface of carbon monolith (CM) was chemically treated in order to obtain antibacterial filters with silver deposit for water treatment. The chemical treatment involved submerging the as-received CM in $HNO_{3},$ $KOH$ and $H_{2}O_{2}$ solution. The specific surface area was examined by $N_{2}$ adsorption. Silver deposition at the surface of CM samples was performed using cheap and simple procedure of immersing CM samples in aqueous solution of $AgNO_{3}$. Temperature programmed desorption method has been used in order to investigate the nature and thermal stability of surface oxygen groups before and after silver deposition. The composition and crystalinity of silver deposits have been examined by X-ray diffraction. Chemical treatment does not cause any drastic changes of CM specific surface area, but increases a total amount of surface oxides. Amount of deposited silver is several times higher for all chemically treated samples. The results show that increasing the amount of CO yielding groups on CM surface leads to increased amount of Ag deposit and decreases its crystallite sizes
Źródło:
Acta Physica Polonica A; 2011, 120, 2; 284-288
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of Fe-Nb-B Base Hardfacing of Steel
Autorzy:
Kilinc, B.
Cegil, O.
Abakay, E.
Sen, U.
Sen, S.
Powiązania:
https://bibliotekanauki.pl/articles/1311693.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.65.Kn
68.55.J-
81.65.Lp
Opis:
Recently hardfacing by welding has become a commonly used technique for improvement of material performance in extreme (high temperature, impact/abrasion, erosion, etc.) conditions. In the present study, three different alloy compositions of the Fe-Nb-B were used for hardfacing of the AISI 1020 steel by tungsten inert gas welding process and analyzed. The coatings were produced from a mixture of ferrous niobium, ferrous boron and iron powders in the range of - 45 μm particle size with different ratio. The coatings' thickness was set to 2-3 mm on the substrate. Microstructure, phase analysis and hardness of the manufactured hardfacing alloys were characterized. Deposition results indicate good quality thick coating and porosity free of the hardfacings. X-ray diffraction analyses showed that the alloyed layers include iron borides, FeNbB and iron phases. It was shown that surface alloyed layer has composite structure including steel matrix and well distributed boride phases.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 656-658
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative Morphological Analysis of Graphene on Copper Substrate obtained by CVD from a Liquid Precursor
Autorzy:
Weiss, M.
Walkowiak, M.
Wasiński, K.
Półrolniczak, P.
Kokocińska, B.
Strupiński, W.
Powiązania:
https://bibliotekanauki.pl/articles/1032380.pdf
Data publikacji:
2017-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.65.Pq
81.05.ue
Opis:
Graphene film has been produced on untreated Cu substrate by a chemical vapor deposition technique in ambient pressure with liquid ethanol serving as the carbon precursor. The obtained material has been subjected to morphological study, directly on Cu substrate, by means of optical microscopy, scanning electron microscopy, atomic force microscopy, and a detailed Raman analysis. As a benchmark material, graphene obtained on Cu by a conventional CVD from gaseous methane was used. This simple experimental setup has proved to enable obtaining large area graphene samples with nearly 100% substrate coverage and large domains of one carbon layer. As compared to graphene from gaseous precursor, the presented approach resulted in visibly more defects and impurities. These imperfections are due to more complex precursor molecular structure and lack of Cu pretreatment with hydrogen, the later cause being easy to eliminate in course of further optimization of the method. The described approach can be regarded as a viable, low-cost, and experimentally simple alternative for the existing techniques of producing large area graphene. By providing direct comparison with the conventional method, the paper's intention is to provide deeper insight and to fill gap in the understanding of mechanisms involved in graphene formation on copper.
Źródło:
Acta Physica Polonica A; 2017, 131, 6; 1497-1506
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Corrosion Behavior of Nitride and Cr-Al-N Coatings Formed on AISI D2 Steel
Autorzy:
Kılınc, B.
Demirkiran, S.
Sen, U.
Sen, S.
Powiązania:
https://bibliotekanauki.pl/articles/1399749.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.65.Kn
68.55.J-
81.65.Lp
Opis:
In the present work, the corrosion behavior of Cr-Al-N coating formed on the pre-nitrided AISI D2 cold work tool steel by thermo-reactive diffusion technique in the powder mixture consisting of ferro-chromium, aluminum, ammonium chloride and alumina at 1000C for 2 h was investigated. The phases formed in the coating layers were $Cr_2N$, $(Cr,Fe)_2N_{1-x}$, $AlN$, and $Fe_2N$ which were confirmed by X-ray diffraction analysis. The uncoated, nitrided, and Cr-Al-N coated specimens were placed in corrosive media (3.5 wt% salt solution). A standard saturated calomel electrode was used as a reference and graphite as a counter or auxiliary electrode. The effectiveness of the coatings in preventing corrosion was tested in the NaCl solution by electrochemical impedance studies using the Nyquist plots and potentiodynamic studies as well. Conclusively, the application of nitride and Cr-Al-N layers on AISI D2 steel increased its surface hardness and corrosion resistance. The corrosion resistance of Cr-Al-N coatings is higher than that of uncoated and nitrided steels.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 268-270
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Corrosion Properties of CrAlN and TiAlN Coatings Deposited by Thermoreactive Deposition Process
Autorzy:
Cegil, O.
Kılınc, B.
Sen, S.
Sen, U.
Powiązania:
https://bibliotekanauki.pl/articles/1194669.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
82.45.Bb
81.65.Kn
81.15.-z
Opis:
In the present study, the corrosion behaviors of chromium aluminum nitride (CrAlN) and titanium aluminum nitride (TiAlN) coatings deposited on AISI D2 steel samples are reported. Steel samples were pre-nitrided at 575C for 8 h in the first step of the coating process, and then TiAlN and CrAlN coatings were performed by thermoreactive deposition process in a powder mixture consisting of alumina, ammonium chloride, aluminum and ferrous titanium or ferrous chromium for TiAlN or CrAlN, respectively. Coating treatments were realized at 1000C for 2 h. Coated samples were characterized by X-ray diffraction analysis, optical microscopy, scanning electron microscopy, and microhardness tester. The corrosion properties of uncoated and coated samples were characterized by potentiostatic polarization test. CrAlN and TiAlN coated steel specimens exhibited the higher corrosion resistance than uncoated steels in a 0.5 M NaCl solution.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 359-361
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of the Temperature Dependent Thermal Expansion Coefficients of Bulk AlN by HRXRD
Autorzy:
Kröncke, H.
Figge, S.
Hommel, D.
Epelbaum, B.
Powiązania:
https://bibliotekanauki.pl/articles/1811948.pdf
Data publikacji:
2008-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
01.30.Cc
61.05.cp
81.05.Ea
65.40.De
Opis:
We measured the lattice constants of bulk aluminum nitride crystals at various temperatures by high resolution X-ray diffraction. By the use of a high temperature chamber and a X-ray cryostat a temperature regime from 20 to 1210 K was available. Furthermore, the measured data were fitted by Einstein- and Debye models which yield reliable parameters for the calculation of the thermal expansion coefficients of AlN.
Źródło:
Acta Physica Polonica A; 2008, 114, 5; 1193-1200
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of deformation on the transformation temperatures of martensite and bainite structures in Cu-9.97%Al-4.62%Mn alloy
Autorzy:
Aldirmaz, E.
Powiązania:
https://bibliotekanauki.pl/articles/1075528.pdf
Data publikacji:
2016-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.66.Dk
68.37.Hk
81.30.Kf
81.30.Mh
62.20.-x
65.40.-b
Opis:
At present study of Cu-9.97%Al-4.62%Mn alloy system is used. Some physical properties of martensitic and bainite phase transformatios in Cu-9.97%Al-4.62%Mn (wt%) alloy were investigated by means of scanning electron microscopy and differential scanning calorimetry. In scanning electron microscope observations of Cu-9.97%Al-4.62%Mn alloy were noted two kinds of martensitic phases. These phases were defined as β'₁ (M18R) and γ'₁ (2H) martensites structures. According to differential scanning calorimetry measurement results, the deformation induced temperature is expected to be higher than the thermally induced temperature in Cu-9.97%Al-4.62%Mn alloy for martensite and bainite structures.
Źródło:
Acta Physica Polonica A; 2016, 129, 1; 40-42
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of the Silanization Processes on the Properties οf Oxidized Multiwalled Carbon Nanotubes
Autorzy:
Scheibe, B.
Borowiak-Palen, E.
Kalenczuk, R.
Powiązania:
https://bibliotekanauki.pl/articles/1807640.pdf
Data publikacji:
2009-12
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.65.Mq
81.07.De
61.48.De
65.80.-g
68.37.Lp
Opis:
This paper presents the results of the research on the effect of the two different silanization methods on the thermal and structural properties of oxidized multiwalled carbon nanotubes. As-purified material was oxidized in the mixture of nitric and sulfuric acids. An oxidized material was divided into two parts which underwent two silanization treatments by 3-aminopropyltriethoxysilane (APTES). The first experiment (I) was performed at room temperature in acetone (pH 7) for 30 min. The second experiment (II) involved a hydrolysis of APTES at 40°C in water (pH 4) for 3 h. The functionalization extent of the samples at each step of the preparation was investigated by the Raman spectroscopy. The presence of the functional groups on the nanotubes surface have been studied via the Fourier transform infrared spectroscopy (FT-IR). The quantity of the external moieties introduced on multiwalled carbon nanotubes surface after oxidation process was estimated by the Boehms titration method. The high resolution transmission electron microscopy analysis allowed us to observe the changes of the morphology of the investigated carbon nanotubes. The influence of the silanization processes on the thermal stability of multiwalled carbon nanotubes was thoroughly studied by thermogravimetry analysis. There was observed a significant increase of the thermal stability of the multiwalled carbon nanotubes samples upon silanization treatment in respect of pristine and oxidized multiwalled carbon nanotubes.
Źródło:
Acta Physica Polonica A; 2009, 116, S; S-150-S-155
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Enhanced Corrosion Resistance of Silicone-Coated Stents by Plasma Treatment
Autorzy:
Kim, H.
Baik, K.
Moon, M.
Sung, C.
Powiązania:
https://bibliotekanauki.pl/articles/1187325.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.65.-b
Opis:
The interfacial bonding of silicone-coated stents was characterized by field emission scanning electron microscopy and anodic potentiodynamic polarization tests. The coaxial in-lens secondary electron imaging revealed partial bonding between silicon rubber and nitinol alloy strips in both primer-treatment and plasma-treatment cases. Several strands between the polymer and stent substrate were observed in both cases and it seems that the bonding strength is the same. However, potentiodynamic polarization tests have shown that the corrosion rates of the plasma-treated nitinol stents were less than half of that of the primer-treated stents, indicating higher corrosion resistance. This enhanced corrosion resistance may be attributed to the modification of the physical properties of the surface of the stents by plasma treatments, making the oxide layer more effective than that of the primer-treated stents.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 857-860
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Enrichment of AISI 316L Steel Surface Layer with Rare Earth Elements Using Ion Beams
Autorzy:
Sartowska, B.
Waliś, L.
Starosta, W.
Barlak, M.
Pochrybniak, C.
Kowalska, E.
Powiązania:
https://bibliotekanauki.pl/articles/1400431.pdf
Data publikacji:
2013-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
52.77.Dq
52.77.-j
72.15.Eb
81.65.-b
Opis:
Enrichment of AISI 316L steel surface layers with rare earth elements was carried out using two methods with ion beam applying. The first one was the ion implantation with the doses in the range of $1 \times 10^{15} cm^{-2}$ up to $5 \times 10^{17} cm^{-2}$ where mishmetal (Ce+La) was used as the ion source. The second method was the high intensity pulsed plasma beams. The plasma pulses contained both ions/atoms of Ce+La from the electrodes material (mishmetal). The pulse energy densities $(3 J/cm^2)$ were sufficient to melt the near surface layer of the steel and introduce those elements into the surface layer. The aim of this work was to investigate the changes of stainless steel surface properties (morphology, rare earth elements concentration, presence of identified phases) after the rare earth elements addition with or without melting. Scanning electron microscopy, energy dispersion spectroscopy, and X-ray diffraction analysis were used for initial and modified surface characterisation. Grazing-incidence X-ray diffraction shows differences in the identified phase presence in the modified surface layer connected with the modification method.
Źródło:
Acta Physica Polonica A; 2013, 123, 5; 822-824
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Properties of the Laser Modified Surface Layer
Autorzy:
Bień, A.
Szachnowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/2011025.pdf
Data publikacji:
1999-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.40.-z
81.65.-b
81.70.Fy
Opis:
This research concerns a surface layer formed on 21H12NMFA steel with a continuous wave 6 kW CO$\text{}_{2}$ laser. The purpose of the study was the determination of the physical properties of the layer with chosen methods of identification. Electromagnetic method with a point probe has been used to determine the homogeneity in numerous points of the layer. Optic and electron (TEM) microscopy enabled the identification of the microstructure of the layer, whereas using Hanemann's meter the microhardness on the surface of the sample, and also its distribution in the layer, could be evaluated. The complex characteristic of the laser formed surface layer based on the results of the above methods of investigation is presented. The study has shown that the electromagnetically determined homogeneity of the surface layer (i.e. concerning its permeability and permittivity) can be also related to thickness, structure, and microhardness of the layer.
Źródło:
Acta Physica Polonica A; 1999, 96, 2; 263-273
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Extreme Ultraviolet Surface Modification of Polyethylene Terephthalate (PET) for Surface Structuring and Wettability Control
Autorzy:
Ahad, I.
Fiedorowicz, H.
Budner, B.
Kaldonski, T.
Vázquez, M.
Bartnik, A.
Brabazon, D.
Powiązania:
https://bibliotekanauki.pl/articles/1398827.pdf
Data publikacji:
2016-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.Lg
81.40.Wx
81.16.Rf
81.65.-b
Opis:
The surface modification of polyethylene terephthalate (PET) polymer films has been performed by irradiation of extreme ultraviolet photons to investigate the effect of surface structuring on wettability control. For biomedical engineering applications, surface structuring and wettability control of PET films could enhance the polymer biocompatibility by promoting cell adhesion and consequently proliferation. The PET films are irradiated with laser plasma extreme ultraviolet source based on double stream gas puff target under different environments. The extreme ultraviolet modified PET film surfaces are characterized by atomic force microscopy and WCA goniometer. The extreme ultraviolet surface modification resulted in the formation of nano- and microstructuring on the polymer surfaces. The surface structuring consequently increased WCA making the PET surfaces more hydrophobic. The results demonstrate the direct relationship between surface roughness and hydrophobicity for extreme ultraviolet modified PET samples.
Źródło:
Acta Physica Polonica A; 2016, 129, 2; 241-243
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of High-Density GaN Nanowires through Ammoniating $Ga_2O_3//Nb$ Films
Autorzy:
Zhuang, H.
Li, B.
Zhang, S.
Zhang, X.
Xue, Ch.
Wang, D.
Shen, J.
Powiązania:
https://bibliotekanauki.pl/articles/1813498.pdf
Data publikacji:
2008-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.65.-k
81.05.Ea
81.15.Cd
Opis:
High-density GaN nanowires were successfully synthesized on Si(111) substrates through ammoniating $Ga_2O_3//Nb$ films under flowing ammonia atmosphere at 950°C. The as-synthesized GaN nanowires are characterized by X-ray diffraction, selected-area-electron diffraction, Fourier transform infrared, scanning electron microscopy, and field-emission transmission electron microscopy. The results show that the synthesized nanowires are single-crystal hexagonal wurtzite GaN with diameters ranging from 30 to 100 nm and lengths up to several microns. The photoluminescence spectra measured at room temperature only exhibit a strong and broad emission peak at 367.8 nm. Finally, the growth mechanism of GaN nanowires is discussed.
Źródło:
Acta Physica Polonica A; 2008, 113, 2; 723-730
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies