Temat: combustion pressure - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Evaluation of current developments and trends in the diagnosis of marine diesel engines based on the indicator diagrams analysis
Autorzy:: Pawletko, R.
Polanowski, S.
Powiązania:: https://bibliotekanauki.pl/articles/244253.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion pressure sensor
indicator diagram analysis
Opis:: The paper analyses the current offer of combustion pressure sensors for use on marine engines under operating conditions, methods of data acquisition, methods of determining TDC position and methods of obtaining diagnostic information from the indicator diagrams. Terms of continuous work on marine engines themselves only: new ABB cylinder pressure sensor, the piezoelectric sensors from KISTLER and AVL companies, but with limitations, the main ones being stability at high temperature. Another important issue for the accuracy of mean indicated pressure and heat released characteristics determination is referred to TDC position on the indicator diagrams. TDC is appropriate thermodynamic point, it is hardly determinable in the presence of interference and lack of sufficient information – but is used, for example in ABB solution. One of the sources of diagnostic information is to analyse trends in some parameters, which, unfortunately, is very difficult in environments with varying engine loads. Further progress in the diagnostic use of indicator diagrams should be associated with the use of the heat released characteristics and the net internal efficiency, which as shown by the results of preliminary tests can be used to assess the accuracy of the injection and combustion of fuel, including gas fuel. Supplementing these methods may be the use of vibration and noise to detect certain malfunctions.
Źródło:: Journal of KONES; 2014, 21, 4; 389-396
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Combustion pressure appraisal in marine diesel engine
Autorzy:: Borkowski, T.
Kowalak, P.
Marcinek, M.
Bonisławski, M.
Powiązania:: https://bibliotekanauki.pl/articles/247275.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
in-cylinder pressure analysis
combustion pressure measurement
Opis:: The practical design of the marine engine multi in-cylinder pressure acquisition system has been presented. The system operational properties and measurement methodology is aimed the online marine diesel engine applications. The design of engine combustion pressure recording system is based on piezoelectric sensors set that comprises quartz pressure element and charge amplifier, mounted on the indicator pipes, equipped with valves. The required crank degree signal is obtained from shaft encoder that is installed on the test bed engine shaft-line (free end of the hydraulic break). The encoder's TDC dedicated reference pulse is able generate simultaneously at the cylinder 1 and 6 in TDC position. The accuracy of the static crankshaft position calibration was evaluated. Additionally, a complex timing system was developed for individual cylinder TDC and crankshaft positioning definition. Before real time data acquisition starts, the number of engine cycles is defined for recording and the first pulse of each crankshaft revolution is used as trigger signal, so that all instantaneous pressure and crank angle signals acquisition can be started at the identical crankshaft position. The method provides required numbers of combustion cycles to be measured for time domain averaging and off line processing.
Źródło:: Journal of KONES; 2011, 18, 4; 25-32
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: In cylinder pressure assessment from marine diesel engine
Autorzy:: Borkowski, T.
Kowalak, P.
Powiązania:: https://bibliotekanauki.pl/articles/242200.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: marine diesel engine
in-cylinder pressure analysis
combustion pressure measurement
Opis:: This paper explores the feasibility ofusing in-cylinderpressure-based variables in terms of certain class of errors, caused by indirect pressure measurement. Experimental direct in-cylinder measurement pressure setup was constructed, to make comparisons with standard indicator channel and indicator valve design. Zero-dimensional model was used for particular combustion system design. Subsequently, paper describes the application of a zero-dimensional combustion model for pressure signal analysis in cylinder head indicating passage of medium speed marine diesel engine. Recording of engine cylinder pressure development and its qualified evaluation is common aid for maintenance. Especially the outline of experimental test-bed, the injector nozzle equipped with piezoelectric pressure transducer, measurement system specification, B type uncertainty -mean angular speed characteristic, wavelet "denoising" setting and signals comparison, engine cylinder indicator model channel, cylinder pressure traces influenced by engine speed and load, cylinder pressure traces influenced by engine load and speed with two different indicator channel lengths, Indicated engine cylinder power in motoredmode of operation are presented in the paper.
Źródło:: Journal of KONES; 2009, 16, 3; 39-46
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Diagnostic of malfunction of four stroke marine engine using harmonic components of combustion pressure waveforms
Autorzy:: Drewing, S.
Dereszewski, M.
Powiązania:: https://bibliotekanauki.pl/articles/241605.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: technical diagnostics
marine engines
FFT
harmonic components
combustion pressure
Opis:: The paper presents results of experimental measurements and analysis of combustion pressure and fuel pressure in high-pressure line before fuel valve. The aim of conducted experiments was detection of failures of high-pressure fuel system. Both pressure signals were recorded simultaneously and subsequently processed using FFT decomposition of obtained wavelets. The idea of comparison of both fuel and gas pressures came after observations of occurrence changes of wavelets form of fuel high pressure, probably caused by malfunction of injector's sprayer. The engine from test bed is very well armoured with sensors, what enable observations of fuel and combustion pressure in real time. Unfortunately, such equipment is very unlike in real objects, what created un idea to find out whether run of combustion pressure wavelet reflects fuel pressure deviations and whether is possible to detect such kind of deviations in way of decomposition of indicated pressure wavelet. Experiment was carried out in laboratory of Gdynia Maritime University, using medium speed diesel engine. Simulation of malfunctions of fuel valve was obtained by installation of specially prepared spraying nozzles. All measurements were carried out at reference load of 75% of MCR (Maximum Continuous Rating). In order to get reliable results and avoid errors due to omitting outer atmospheric conditions, registrations were repeated several times, in days characterized by different temperature and atmospheric pressure.
Źródło:: Journal of KONES; 2018, 25, 2; 97-103
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: The impact of a place for the measurement of cylinder pressure of marine piston engine on the indicator diagrams and indicator parameters
Autorzy:: Witkowski, Kazimierz
Wysocki, Jacek
Powiązania:: https://bibliotekanauki.pl/articles/241929.pdf
Data publikacji:: 2019
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: diagnostics
marine piston engines
self-ignition engines
indication
middle indicated pressure
combustion pressure
Opis:: The article discusses one of the most popular methods of diagnosing selected damages of marine piston engines, which is the indication or measurement of pressure changes in the engine’s combustion chamber. Improving the quality of indicator diagrams may contribute to the increase in the efficiency of using the parameters indicated in the diagnostics of marine piston engines. Measurement errors during engine indication are primarily caused by measuring channels that connect the combustion chamber to the pressure sensor. One way to avoid these errors is to install the pressure sensor directly in the combustion chamber. It seems that it is possible to eliminate these errors. However, there is a risk that the pressure sensor will be damaged by the effect of high temperature on it during combustion of the fuel-air mixture in the engine’s combustion chamber. The article presents the results of tests that indicate that the measured temperatures in the place where the sensor was installed (in the combustion chamber) did not exceed the critical value specified by the pressure sensor manufacturer. The article also presents the results of cylinder pressure measurement not only in the combustion chamber but also in two other points - on the thread of the indicator cock and in the measuring channel between the indicator cock and the cylinder head. The tests were carried out in a wide range of engine load technically efficient and with simulated damage in the fuel injection system. The article presents a comparative analysis of the parameters read out of the indicator diagram for the three abovementioned pressure measurement locations. It was shown that the pressure measurements carried out directly in the combustion chamber are free from errors resulting from the influence of measuring channels and indicator cock.
Źródło:: Journal of KONES; 2019, 26, 2; 181-188
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: The application of spectrum analysis of course of pressure in combustion chamber for diagnosis of medium speed marine diesel engines
Autorzy:: Monieta, J.
Rutkowski, J.
Powiązania:: https://bibliotekanauki.pl/articles/243650.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: piston marine diesel engine
course of combustion pressure
diagnosis
spectrum analysis
Opis:: In this work has been undertaken a study test the application course of combustion pressure signals in combustion chamber the marine medium-speed engine to diagnostic. In research has been used active experiment. The pressure signals analysis in cylinder has been carried out in amplitude and frequency domain, as new method for result processing. In preliminary research has been carried out with used marine engine 5BAH22 with current generator, be present in Engines Room Laboratory the Maritime Academy in Szczecin. Preliminary research has consisted in measurement the course of combustion pressure signals in individual cylinders and analysis the combustion pressure signals in time, amplitude and frequency domain at different engine load the combustion engine and has been checked that diagnostic parameters will be correlate with engine load. The current generator has been loaded with water resistor. The purpose of this work have been selected sensitive diagnostic symptoms and checked their usability in diagnosis marine diesel engine. In principal research has been simulated inability the turbocharger air filter as his mechanical impurities. Useful diagnostic symptoms have been determined. The method were being verified, execute operating research on working marine diesel engines at port and shipyard.
Źródło:: Journal of KONES; 2008, 15, 3; 367-374
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Pressure measurement in the cylinder of four-stroke marine engine - simulation analysis
Autorzy:: Cuper-Przybylska, Dominika
Powiązania:: https://bibliotekanauki.pl/articles/133664.pdf
Data publikacji:: 2019
Wydawca:: Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:: diesel engine
marine engine
combustion pressure
indicator channel
silnik wysokoprężny
silnik okrętowy
ciśnienie spalania
Opis:: The measurement of combustion pressure relies on connecting a pressure sensor to a four-stroke marine engine cylinder by a channel led out from the engine cylinder. The geometry of the channel distorts the results of combustion pressure measurements. The purpose of the work is to create a model of combustion processes in engine cylinders. The model uses a mathematical description of the indicator channel on one of the engine cylinders. The input data to the model and the data necessary for its verification came from the direct measurements on the research facility. The test object was a four-stroke Sulzer 3AL25/30 engine loaded by an electric power generator. During calculations, different diameters and lengths of measurement channel were simulated. The obtained results allowed to formulate the conclusion that the geometry of the measurement channel has a significant impact on the measurement results. The increase of the length of the measuring channel as well as the diameter of the channel causes disturbances in the measurement of the maximum pressure.
Źródło:: Combustion Engines; 2019, 58, 2; 36-39
2300-9896
2658-1442
Pojawia się w:: Combustion Engines
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: The evaluation of the regularity of the combustion process in the SI engine fueled with petrol and ethanol
Autorzy:: Stelmasiak, Z.
Pietras, D.
Powiązania:: https://bibliotekanauki.pl/articles/133367.pdf
Data publikacji:: 2017
Wydawca:: Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:: ethyl alcohol
overall efficiency
engine smoothness
combustion pressure
indicated pressure
alkohol etylowy
sprawność ogólna
równomierna praca silnika
ciśnienie spalania
ciśnienie indykowane
Opis:: In the paper are presented results of a research work concerning automotive spark ignition engine fueled with ethyl alcohol. The research was performed on a Fiat 1100 MPI engine adapted to dual fuel feeding. Injection of ethyl alcohol was accomplished in area near inlet valve with use of original injectors, the same as used in case of gasoline feeding. The subject-matter of the study was to compare smoothness of engine operation fueled with alcohol in relation to parameters of the engine fueled traditionally with gasoline. There were analyzed combustion parameters calculated on the basis of recorded indicated diagrams of successive individual combustion cycles and averaged diagrams of successive 50 cycles. Performed investigations are pointing at smooth engine operation running on neat alcohol, and on improvement of performance parameters such as effective power and overall efficiency.
Źródło:: Combustion Engines; 2017, 56, 1; 94-99
2300-9896
2658-1442
Pojawia się w:: Combustion Engines
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Zastosowanie analizy przebiegu ciśnienia w cylindrach okrętowych silników spalinowych w różnych dziedzinach do diagnostyki w warunkach eksploatacji
The application in-cylinder pressure course in different domains for diagnostics of medium speed marine diesel engines in operation conditions
Autorzy:: Monieta, J.
Powiązania:: https://bibliotekanauki.pl/articles/133349.pdf
Data publikacji:: 2013
Wydawca:: Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:: silniki okrętowe
silniki tłokowe
przebieg ciśnienia w cylindrach
diagnostyka
przydatne symptomy
piston marine diesel engine
course of combustion pressure
diagnostics
useful symptoms
Opis:: W artykule przedstawiono wyniki zastosowania analizy przebiegu ciśnienia w cylindrach okrętowych średnioobrotowych silników tłokowych w dziedzinie czasu, amplitudy, częstotliwości oraz analizy falkowej do ich diagnozowania w celu wyboru racjonalnej metody. Przeprowadzono wstępne i zasadnicze badania eksperymentalne z wykorzystaniem metod planowania eksperymentu. Wstępne badania zostały przeprowadzone na okrętowych silnikach Sulzer napędu prądnic, występujących w siłowniach masowców i polegały na pomiarze sygnałów ciśnienia w poszczególnych cylindrach i analizie ich przy różnych obciążeniach silnika oraz sprawdzaniu ich korelacji z obciążeniem. W badaniach zasadniczych oceniano stan techniczny poszczególnych cylindrów przy stałym obciążeniu. Przydatne symptomy diagnostyczne zostały wyselekcjonowane, a metodę zweryfikowano lokalizując uszkodzenia elementów silnika.
In this work has been presented the results of the the application in-cylinder pressure signal analysis of the marine medium-speed engine to diagnostics. In-cylinder pressure signals analysis has been carried out in amplitude, time and frequency domain as well wavelet analysis for their diagnostics to select a rational method. There have been carried out preliminary and principal investigations using experiment planning. The preliminary research have been done on marine diesel engines Sulzer type drive generators, occurring in engine rooms of bulk carriers and rely on the measurement of pressure signals in each cylinder and analyzing them under different engine loads and verify their correlation with the load. In principal research has been diagnosis technical state of individual cylinders at constant loading. Useful diagnostic symptoms have been selected. The method was being verified locating failures of engine elements.
Źródło:: Combustion Engines; 2013, 52, 3; 153-160
2300-9896
2658-1442
Pojawia się w:: Combustion Engines
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Modyfikacja układu do pomiaru przebiegu ciśnienia spalania okrętowego silnika tłokowego Sulzer AL25/30
Modification of the System for Measuring Combustion Pressure in the Ship Piston Engine Sulzer AL25/30
Autorzy:: Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/342392.pdf
Data publikacji:: 2018
Wydawca:: Uniwersytet Morski w Gdyni. Wydawnictwo Uniwersytetu Morskiego w Gdyni
Tematy:: indykowanie
wykresy indykatorowe
średnie ciśnienie indykowane
maksymalne ciśnienie spalania
ciśnienie cylindrowe
diagnostyka
okrętowe silniki tłokowe
indication
indicator diagrams
average indicated pressure
maximum combustion pressure
cylinder pressure
diagnostics
marine piston engines
Opis:: Artykuł przedstawia wybrane problemy analizy przebiegów ciśnień cylindrowych w okrętowych silnikach tłokowych. Prawidłowo sporządzony i przeanalizowany wykres indykatorowy pomaga w formułowaniu wniosków diagnostycznych, za pomocą których można doprowadzić do optymalnej, pod kątem ekonomicznym i ekologicznym, regulacji silnika okrętowego. Pomiary ciśnień cylindrowych zaliczane są do trudnych, a także obarczonych wieloma błędami, dlatego też głównym tematem artykułu jest przedstawienie nowej koncepcji pomiarów przebiegów ciśnień cylindrowych.
The article presents selected problems regarding the correct analysis of cylinder pressures in ship piston engines. Correctly prepared and the analyzed indicator diagram helps in formulating appropriate diagnostic conclusions, with the help of which it is possible to achieve the optimal, in economic and environmental terms, regulation of the ship's engine. Cylinder pressure measurements are classified as difficult and also burdened with many errors. Therefore, the main topic of the article is to present a new concept for cylinder pressure measurements.
Źródło:: Zeszyty Naukowe Akademii Morskiej w Gdyni; 2018, 108; 168-180
1644-1818
2451-2486
Pojawia się w:: Zeszyty Naukowe Akademii Morskiej w Gdyni
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Pulse powered turbine engine concept – numerical analysis of influence of different valve timing concepts on thermodynamic performance
Autorzy:: Tarnawski, P.
Ostapski, W.
Powiązania:: https://bibliotekanauki.pl/articles/200911.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: pressure gain combustion
PGC
constant volume combustion
CVC
turbine engine
CFD analysis
valve timing
spalanie
silnik turbinowy
analiza CFD
Opis:: The present work is an attempt to create the concept of an engine that will combine the benefits of a pulse powered piston engine and continuously powered turbine engine. The paper focuses on the subject of pressure gain combustion (PGC). A turbine engine concept with stationary constant volume combustors, working according the Humphrey cycle, is presented. Its work has to be controlled by valve timing system. Four different valve timing concepts were analyzed. Their influence on thermodynamic performance of engine was evaluated. Different valve constructions were researched by means of 3D numerical computational fluid dynamics (CFD) simulation.
Źródło:: Bulletin of the Polish Academy of Sciences. Technical Sciences; 2018, 66, 3; 373-382
0239-7528
Pojawia się w:: Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Premixed combustion of acetylene-hydrogen fuel mixtures for thermodynamic state generation in a constant volume combustion vessel
Autorzy:: Johnson, S.
Nesbitt, J.
Lee, S. -Y.
Naber, J. D.
Powiązania:: https://bibliotekanauki.pl/articles/242374.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
diesel engine
combustion processes
pressure vessel
preborn
Opis:: Flammability limits and flame speeds of dilute-lean fuel mixtures of hydrogen (H2) and acetylem premixed with oxygen (02) and nitrogen (N2) were examined with a detailed kinetics model. These mixtures are used in a preburn in a constant volume combustion vessel to create elevated temperatures and pressures with gas compositions that represent the thermodynamic state in a diesel engine combustion chamber at fuel injection and auto ignition. A mixture of hydrogen and acetylene with combined atomic hydrogen to carbon ratio (HCR) of 1.85 was used to match that of typical diesel fuel and results are shown in comparison to a previously used mixture with a HCR of 1.17. The lower flammability limit (LFL) of the HCR 1.85 fuel mixture was found at an equivalence ratio of 0.235, while flame speed and adiabatic combustion temperatures were also predicted for post preburn product oxygen levels between O and 21 percent. Flame speeds were shown to decrease with a reduction in oxygen concentration, an increase in nitrogen dilution, while combustion temperatures increased over most of this range. Trends for this relation of flame speed and temperature are presented and a new premixed fuel mixture with an HCR of 1.85 is proposed.
Źródło:: Journal of KONES; 2009, 16, 2; 199-208
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: The lean mixture combustion of simulated producer gas in SI engine
Autorzy:: Przybyła, G.
Szlęk, A.
Ziółkowski, Ł.
Powiązania:: https://bibliotekanauki.pl/articles/244387.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: micro CHP
combustion engine
in-cylinder pressure
Opis:: In this paper the experimental results of spark ignited (SI) engine fuelled with lean mixture of simulated producer gas compared with chosen gaseous fuels are presented. The SI engine test fuelled with simulated producer gas, natural gas and simulated biogas with variable value of excess air ratio has been done. The experiments were carried out on the petrol engine with a low engine displacement. Typical SI engine was selected in order to evaluate the potential application of gaseous fuel (i.e. producer gas, natural gas or biogas). These types of engines are available on a wide scale and commonly used in automotive sector because of the low purchase price and operating costs. It is expected that after minor modifications, the engine can easily operate in micro CHP system. The main goal of this work is to determine the performance of the engine and its impact on the environment during the combustion of the lean producer gas mixtures. The study shows the impact of both the excess air ratio and the type of fuel used for engine performance and emission index. Combustion of lean mixtures of producer gas leads to an increase of carbon monoxide in the exhaust. Increasing the value of excess air ratio affects the growth of indicated efficiency of the engine
Źródło:: Journal of KONES; 2013, 20, 3; 331-338
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Theoretical and real working cycle of four stroke piston engine
Autorzy:: Ambrozik, A.
Jankowski, A.
Slezak, M.
Powiązania:: https://bibliotekanauki.pl/articles/243165.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
thermodynamics
working cycle
cylinder pressure
Opis:: The most important problems concerning analyses of generalized computational thermodynamical working cycle of the four-stroke combustion engine are result of the identification of real indicating diagram. The analysis of working cycle of the four-stroke combustion engine is realized from point of view heat efficiency, the average theoretical cycle pressure, as well as of the influence of the organization working cycle on the value of the maximum pressure in the cylinder of a combustion engine. A novel mathematical model reflecting elementary processes occurring in the cylinder of a combustion engine and connected with it intake and exhaust systems of engine were proposed. Thermodynamical working cycles of four-stroke piston engines, theoretical working cycle of a four-stroke piston engine, thermal efficiency of the theoretical thermodynamic generalised engine work cycle, mean theoretical pressure of the generalised thermodynamic work cycle of a combustion engine, maximum pressure of the theoretical thermodynamic work cycle of a combustion engine, comparative working cycles of piston engines, real working cycle of four-stroke piston engines are presented In het paper. The methods of analyses and calculations referring these engines work cycles were presented. These method show advisability and needs of using them to theoretical calculations and analyses of real work cycles. Generalized engine work cycle was proposed.
Źródło:: Journal of KONES; 2007, 14, 2; 9-18
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: The heat transfer coefficient calculation in the ice cylinder based on in-cylinder pressure data
Autorzy:: Przybyła, G.
Postrzednik, S.
Żmudka, Z.
Powiązania:: https://bibliotekanauki.pl/articles/247975.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: heat transfer coefficient
combustion engines
in-cylinder pressure
Opis:: In this paper the calculations algorithm of heat-transfer coefficient in the combustion chamber of the internal combustion engine is presented. Developed algorithm is based on the in cylinder pressure data. The proposed algorithm can be helpful to determine the average values of heat-transfer coefficient from working medium to the combustion chamber walls (crown of a cylinder head, cylinder walls and piston head) during combustion process. The calculation method includes modified one zone heat release model in combustion chamber of SI engine. Proposed method consists in closing the energy balance equation by the coefficient which expresses the heat losses to the walls of the combustion chamber. The average value of the heat losses during combustion process is calculated by two steps. Firstly, the integration of the energy balance equation (without specifying the heat losses) leads to designation of the so-called net value of heat released in cylinder. In the next step the amount of the total energy supplied to the cylinder is determined taking into account the chemical energy of the supplied fuel. The difference between the supplied value of chemical energy and heat released net value allows to determine the heat losses average value. In last stage, the heat flow equation leads to calculate the mean value of heat transfer coefficient during combustion process.
Źródło:: Journal of KONES; 2013, 20, 4; 382-388
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "combustion pressure" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język