Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Diesel engines" wg kryterium: Temat


Tytuł:
BMD ecofuel for diesel engines
Autorzy:
Struś, M.
Sitnik, L.
Piętak, A.
Powiązania:
https://bibliotekanauki.pl/articles/243008.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
ecofuels
biomixdiesel
BMD
engines
diesel engines
Opis:
The World is strongly dependent on crude oil for its transport needs. In order to diminish this dependence, we need to introduce clean, CO2-efficient, secure and affordable transportation fuels. The current production of liquid biofuels in the EU25 is less than 1% of the market. Recent assessments have concluded that the 2010 targets, 18 Mtoe used in the transport sector, are unlikely to be achieved. There can be three basic possibilities of accomplishing this target: i) use of alcohols (first of all ethanol) and their mixing with petrol; ii) use of fatty acids esters (methyl or ethyl) of vegetable oils and their mixing with diesel fuel, iii) use of synthetic hydrocarbons of the synthetic gas coming from biomass resources and eventually their mixing with other "classical" hydrocarbons. This paper presents a novel way of utilizing alcohols as fuels for a diesel engine. It is proposed to use heavy alcohols as a mix with vegetable oils and conventional diesel fuel. It is presented the way to use alcohols. Namely, the use of heavy alcohols as a solvent for vegetable oil (named the biomix or BM) and after the obtainment of the thickness, which would be approximate to diesel fuel, mixing the biomix with diesel fuel to obtained biomixdiesel (BMD). This solution will be shown for example with butanol as heavy alcohol, rape oil as vegetable oil and conventional diesel fuel. The investigations are carried out with a simple diesel engine on the engine test bed. Main parameters of engine (power output, torque, specifically fuel consumption) and the main exhaust gas component (in this case CO, NOx, PM) will be investigated. There were better results achieved than one expected. Opposed to existing experiences, the maximum of power output and the torque of engine are higher in the whole range of the rotational speed of the engine crankshaft when the engine biomixdiesel (BMD) is reinforced. The addition of the component biomix to fuel influences the specific fuel consumption. Generally, with the larger part of the component biomix the specific fuel consumption grows. Because the power of engine also grows up one should expect that in exploitation the specific fuel consumption should not increase. Very important is that this fuel could be used to reinforce old, existing now and the future diesel engines. The production of butanol is known (from biomass and in other way with electrolysis of ethanol). The possibility to get butanol from ethanol gives a very good perspective for the use of ethanol from today's overproduction and moreover without the essential change of infrastructure. All this leads to the conclusion that fulfilling of the expected requirements of European Union regarding the ecofuels is fully possible.
Źródło:
Journal of KONES; 2012, 19, 4; 589-599
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An analysis of cause and effect relations in diagnostic relations of marine Diesel engine turbochargers
Autorzy:
Adamkiewicz, A.
Powiązania:
https://bibliotekanauki.pl/articles/359843.pdf
Data publikacji:
2012
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
diagnostic relations
turbocharger
Diesel engines
Opis:
The article justifies the need to analyse diagnostic relations for turbocharger operation purposes. Types of turbochargers most frequently used in modern marine engines have been presented. Turbocharger decomposition has been conducted on a selected example. The influence of typical inefficiencies in respect to symptom value changes has been worked out for each heat engine and sub-system. Validation of selected cause and effect relations has been based on operational experience in the technical scale.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2012, 31 (103); 5-13
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Self-regeneration method of diesel particulate filter
Autorzy:
Mitianiec, W.
Powiązania:
https://bibliotekanauki.pl/articles/950135.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engines
exhaust emission
DPF
Opis:
Compression ignition engines have no possibility for self-regeneration of DPF and regeneration requires additional energy for soot combustion (additional fuel or electric energy) after some period of the engine work as a result of closing of substrate pores by soot. The innovation method takes into account a self-regeneration of diesel particle filter by use of special heat recovery system. The paper shows one of possible design of DPF self-regeneration. The exhaust temperature behind the turbine and catalytic converter is very low and for an increasing of gas temperature before DPF, the heat from soot combustion can be used. The preliminary studies show a possibility of using the special design of DPF with heat recovery system. The paper presents results obtained from simulations based on one-dimensional model of such system and analysis of increasing the heat recovery ratio by change of geometry of DPF. The gas heat exchange formulas between DPF and the heat exchange model are partly included in the paper. The preliminary results of calculations show the possibility of increase of exhaust gases in front of DPF about 20%, which enables a continuous regeneration of DPF. Heat recovery ratio is depends on soot combustion rate on the wall of DPF monolith. The method enables to recover some part of energy which is lost in the conventional DPF. The paper is a part of further work in European project FP6 IPSY.
Źródło:
Journal of KONES; 2010, 17, 1; 273-281
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of the combustion process in the electronically controlled marine diesel engine
Autorzy:
Kluj, S.
Powiązania:
https://bibliotekanauki.pl/articles/243056.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
marine diesel engines
simulation
combustion engines
electronically controlled engines
Opis:
The introduction of the electronically controlled low-speed diesel engines has raised a number of new problems - caused mainly by the influence of these electronic system settings on the combustion process. The wide set of the combustion press settings is now available for the chief engineers on the board of the ship and for the shipyard experts during the sea trials. This opens many new possibilities for the combustion process optimization but also causes the danger of the serious engine malfunction due to the improper settings. The paper presents the mathematical model of the electronically controlled low-speed marine diesel engine ant the special attention is paid to the available settings of the combustion process. The effective compression ratio, the injection timing and the exhaust valve setting can be adjusted in a similar manner like in the actual engine. The combustion pressure curves, the mean indicated pressure, the exhaust gas temperature can be observed when changing the combustion settings. The paper describes in detail the results of the several most typical simulations like change of the given combustion pressure increase, the change of the effective compression ratio, the change of the exhaust valve opening timing and the change of the maximum load setting.
Źródło:
Journal of KONES; 2014, 21, 4; 233-238
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vert particle filter test procedure and quality standard for new and in-use diesel engines
Autorzy:
Mayer, A.
Czerwinski, J.
Kasper, M.
Leutert, G.
Heeb, N. V.
Ulrich, A.
Jaussi, F.
Powiązania:
https://bibliotekanauki.pl/articles/247808.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
internal combustion engines
diesel engines
ecology
filters
particulates
Opis:
A new approach is needed to test particle filters for retrofitting Diesel engines. Considering the toxicity of the particles as also the physical and chemical attributes of particle filters, the optimal scheme is to test the components themselves independent of the deployment. That scheme ensures the highest effectiveness with least effort. It also enables evaluation of worst-case situations and assesses the hazards of secondary emissions. The Swiss standard SNR 277 205, which mandates the VERT test procedure, is a first step in that direction. The solution is derived from the physics of the filter media. The filtration of fine particles essentially depends on the particle size and the space velocity. The attributes of the emitting engine are only insignificantly relevant. Hence the physics and chemistry of particle filters can be investigated independent of the engine and its deployment duty. This concept facilitates a very thorough investigation of the size-dependent filtration, aging susceptibility, secondary emissions and extreme situations. Filter systems, which pass this detailed test, perform equally well in every retrofit configuration. This filter test concept was implemented 1998 in the VERT project and is successful for assessing retrofltting [4]. VERT approved fllter systems are already deployed in the Low Emission Zones of Europe, North and South America.
Źródło:
Journal of KONES; 2010, 17, 4; 313-322
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental test of common rail diesel engine supplied with diesel fuel - rape seed oil mixtures
Autorzy:
Klimkiewicz, M.
Mruk, R.
Oleszczak, P.
Powiązania:
https://bibliotekanauki.pl/articles/246559.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
Diesel engines
common rail
biofuels
rapeseed oil
Opis:
In the next few decades, the resources of oil will be depleted. From the other hand, growing market and usage of oils cause increase of oil price. Additionally, only some countries have oil deposits large enough to be independent from foreign suppliers. All these reasons show need for searching and development of new fuels, which can replace traditional ones produced from oil. One of the solutions for Diesel engines are bio-fuels produced from various vegetable oils like rapeseed, coconut or palm oil. Nowadays, the majority of new Diesel engines are equipped with Common Rail fuel injections system. It enables to achieve higher power of the engine, lower emissions and lower fuel consumption. This suggests that the Common rail system should be also utilized in Diesel engines supplied with bio-fuels, produced from various plants, as it was mentioned above. However, the bio-fuels have some properties much different from those of conventional Diesel fuel, for example they usually have significantly higher viscosity. In consequence, the fuel supply and fuel injection systems require some modifications. The paper presents results of the experimental test of Common Rail Diesel engine supplied with four fuels: standard Diesel fuel, rapeseed oil and two mixtures of these fuels: 70 percent of Diesel with 30 percent of rape seed oil and 50 percent of Diesel fuel with 50 percent of rape seed oil. For the research, a new test bench was built in Faculty of Production Engineering, Warsaw University of Life Sciences. The main element of the test bench is one cylinder, direct injection engine Farymann Diesel 18W. Originally, the engine was equipped with mechanical Bosh direct injection system, which was replaced with Common Rail system. The test bench enables measurements of various parameters: torque, pressure inside the cylinder, temperature of cooling water and exhaust gases, emissions etc. The tests of the modified engine were conducted with use of several types of piston and injector.
Źródło:
Journal of KONES; 2012, 19, 3; 213-224
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of chosen parameters of water fuel microemulsion on combustion processes, emission level of nitrogen oxides and fuel consumption of CI engine
Autorzy:
Jankowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/247478.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engines
combustion process
ecology
emulsion
microemulsions
Opis:
The microemulsion is the emulsion with dimension of molecules approx. micrometre and smaller. Such microemulsion of water and diesel oil creates new quality and lets on obtainment ecological and economic of effects, as well as eliminates the disadvantageous influence common emulsions, or unprofitable effects of the injection of water to inlet system of the engine, direct to combustion chambers, as well as the sequential injection of water direct to combustion chambers. The essence of apply of the microemulsion is also improve catalytic influence of small molecules of water on combustion process, what, beside decreasing temperature combustion gases, influences both emission level components of toxic combustion gases, as and the level of the specific fuel consumption. The paper presents different ways of microemulsion production, novel way of microemulsion production, which does not demand apply of mixers and suffers obtainment of microemulsion with the volumetric content of water in diesel oil do 40% under conditions of laboratory and stabile the microemulsion with content of water in diesel oil to 25%. Results of laboratory research involving basic parameters of the microemulsion and engine researches with measurements emission ingredients of toxic exhaust gases and fuel consumptions are presented involving basic parameters of the microemulsion and engine researches with measurements emission ingredients (NOx, soot, fuel consumption) of toxic exhaust gases and fuel consumptions are presented in the paper.
Źródło:
Journal of KONES; 2011, 18, 4; 593-600
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Transestrification of biofuel, yes but why?
Autorzy:
Sitnik, L. J.
Powiązania:
https://bibliotekanauki.pl/articles/242003.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
diesel engines
fuels
alternative fuels
biofuel
Opis:
This paper presents a novel way of utilizing alcohols as fuels for a diesel engine. It is proposed to use heavy alcohols as a mix with vegetable oils and conventional diesel fuel. It is presented the another way to use alcohols. Namely, the use of heavy alcohols as a solvent for vegetable oil (named the biomix or BM) and after the obtainment of the thickness, which would be approximate to diesel fuel, mixing the biomix with diesel fuel to obtained biomix diesel (BMD). This solution will be shown for example with butanol as heavy alcohol, rape oil as vegetable oil and conventional diesel fuel. The investigations are carried out with a simple diesel engine on the engine test bed. Main parameters of engine (power output, torque, specifically fuel consumption) and the main exhaust gas component (in this case CO, NOx, PM) will be investigated. There were better results achieved than one expected. Opposed to existing experiences, the maximum of power output and the torque of engine are higher in the whole range of the rotatory speed of the engine crankshaft when the engine biomix diesel (BMD) is reinforced. The addition of the component biomix to fuel influences the specific fuel consumption. Generally with the larger part of the component biomix the specific fuel consumption grows. Because the power of engine also grows up one should expect that in exploitation the specific fuel consumption should not increase. Transestrification process in the proposed solution does not appear. This has large economic meaning. The investment amount (the transestrification plant) is not necessary. The power consumption to get fuel is lower. Vegetable oils are fully used (glycerine is not produced). BMD has stable parameters. The usage of existing infrastructure to this transportation is enough. Very important is that this fuel could be used to reinforce old, existing now and the future diesel engines. The production of butanol is known. It will be interesting to use for the production an electrolysis process, especially in the proposed new plant where the electrolysis process is connected with the process to get the electrical energy from byproducts of electrolysis (i.e. hydrogen and oxygen) in the fuel cell. It seems to be more efficient. The possibility to get butanol from ethanol gives a very good perspective for the use of ethanol from today's overproduction and moreover without the essential change of infrastructure.
Źródło:
Journal of KONES; 2008, 15, 4; 537-544
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Real road tests - exhaust emission results from passenger cars
Autorzy:
Merkisz, J.
Powiązania:
https://bibliotekanauki.pl/articles/245491.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
exhaust emission
road tests
Diesel engines
diesel particulate filters
Opis:
The paper presents the results of on-road exhaust emission tests of passenger car fitted with diesel engine, and a DPF (diesel particulate filter). Under such conditions the author could determine the actual vehicle emissions. The tests were performed on a road portion of a fifty kilometres or so - these tests provide information on the on-road emissions and are a basis for their ecological evaluation. For the measurement of the exhaust emissions the authors used a portable exhaust emissions analyzer SEMTECH DS by Sensors Inc. The analyzer measured the concentration of the exhaust components at the same time measuring the exhaust mass flow. The measurements of the particulate matter (mass) were done with the use of particle analyzer by AVL. The obtained data were used to calculate the relations that characterize the influence of the dynamic engine parameters on the exhaust emissions. These properties were taken into account indirectly using the whole range of speeds and accelerations of the vehicle (engine speeds and loads of the engine) for the preparation of the matrices of the emissions rate. The used data were averaged within individual speed and acceleration ranges thus obtaining the characteristics of the share of operation in individual ranges and the characteristics of the emission matrices of the individual emission components. The above results served for defining of the emission level indicator of the vehicles that can be used for classification of vehicle fleet in terms of their emission level.
Źródło:
Journal of KONES; 2011, 18, 3; 253-260
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aging processes of biodiesel and biodiesel/diesel fuel blends
Autorzy:
Jankowski, A.
Baczewski, K.
Powiązania:
https://bibliotekanauki.pl/articles/246930.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engines
biofuels
FAME
fuel aging
emissions
Opis:
There has been increasing interest in recent years in the use of biodiesel as a substitute for petroleum-based diesel fuel. Fatty acids methyl esters (FAME) in a pure form are applied as a biodiesel B100 or as blends with diesel fuels named as the B10 biodiesel, the B20 biodiesel etc. FAME is susceptible to oxidation and to changes of other essential parameters during aging processes, which have an essential influence the NOx emission. Change of biodiesel parameters results in deterioration of fuel working properties and in increase of the NOx emission level. The increased NOx emission level is accompanied with high viscosity. Experiments with the PDPA laser-equipment showed that high content of biodiesel in a fuel increases the Sauter Mean Diameter (D32) of a fuel spray. The Sauter Mean Diameter increases with time of the aging process of biodiesel, what additionally can unfavourably influence the level of emission of exhaust gases. The research results of samples of aging processes of Rapeseed Methyl Ester (RME) accomplishing requirements of the EN 14214 European Biodiesel Standard, diesel fuel accomplishing requirements of the EN 590 (for based diesel fuel and blends of based diesel fuel and RME containing 1%, 5%, and 20% RME) are presented in the paper. Determination of influence of the fuel properties and the aging process on the acid number, kinematic viscosity, cloud point, cold filter plugging point, and pour point of fuel samples was an aim of performed research, as well the aging RME effect on elastomers comparatively with fresh RME. The process of fuel samples aging was enforced by the daylight (sun) effect, air, the elevated temperature and water. Fuel samples were aged in laboratory conditions during 15 and 60 weeks. Then the changes of fuels properties with relation to the same properties in initial conditions were determined. The water presence intensifles the process of the RME aging, especially in longer contact. An essential novel aspect of the paper is a relation determined between changes of biodiesel properties during aging and the NOx emission level that is connected mostly with increased viscosity. Rise of viscosity increases size of droplets of spray ed fuel, which results in increased emission level. Prevention of viscosity changes is an efficient way of the NOx emission decrease.
Źródło:
Journal of KONES; 2010, 17, 2; 167-180
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some aspects using of micro emulsion fuel-water for supply of combustion engines
Autorzy:
Jankowski, A.
Sowa, K.
Zabłocki, M.
Powiązania:
https://bibliotekanauki.pl/articles/245346.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engines
combustion processes
ecology
emulsion
microemulsions
Opis:
The emulsion is a mixture of two or more insoluble liquids. Microemulsion is the emulsion with particles dimension in a range of one micrometer and smaller. Such a microemulsion of water and diesel fuel will create a novel quality and allows one to simultaneously achieve environmental and economic effects, as well as eliminate the adverse impact of normal emulsions, or adverse effects of water injection into the engine intake system or directly into the combustion chamber, as well as the sequential injection of water directly into the combustion chamber. Application of microemulsion of water and diesel to fuel diesel engine positively affects the combustion process through the catalytic impact of microparticles of water and to improve the process of preparation of the microemulsion injection into the combustion chamber as a result of water microparticles microexplosions. This article presents the investigation results of an internal combustion engine fuelled by an emulsion of water and diesel fuel and also fuelled by emulsion of FAME and water. It therefore seems appropriate to a strong increase in the degree of dispersion of water droplets in the emulsion by applying the methods to obtain the size of water droplets on nanometric range. This should dramatically improve both the stability of emulsion and its influence on the chemical effects of combustion in diesel engine. The performed analysis and investigation is the first stage of work, which is aimed to reduce emissions of PM and NOx simultaneously. It seems that the simultaneous reduction in emissions is possible through the usage of a stable emulsion, i.e. water-fuel microemulsion.
Źródło:
Journal of KONES; 2009, 16, 4; 531-538
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heat release characteristics in combustion chamber of CI engine
Autorzy:
Jankowski, A.
Lagowski, P.
Slezak, M.
Powiązania:
https://bibliotekanauki.pl/articles/244001.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
internal combustion engines
diesel engines
combustion processes
heat release
Opis:
On the basis of the internal heat balance of CI engine with direct fuel injection, the quantity of heat transported during the combustion process from the combustion zone was determined. The real indicator diagrams are the bases for determination of the heat release Characteristics during the combustion process and making up of the internal heat balance. These diagrams were worked out for the engine fuelled with diesel oil for three sets of the injection timing and for work of the engine according to the full load engine Characteristics, and the load Characteristics taken at the engine speedb for the maximum engine torque. Tests with the three different injection timing were carried out. Tests with the load characteristics of the compression-igniting engine for five values of the power were carried out. The pressure in the cylinder of the engine during combustion process was recorded by means of liąuid cooled a piezo-electric quartz sensor with a load amplifier. Characteristics of heat release depended on the composition, temperature and the mol quantity of the working charge in the cylinder during the combustion process. Characteristics of the heat release were determined with the use of the novel calculation program. The program was worked out by authors at the assumption that the process of complete combustion was finished at the moment of the opening of the engine exhaust valve. For purpose of simplification calculation of the quantity of heat lost into the cooling system, the radiation, dissociation and incomplete combustion, were assumed to change during the combustion process in a linear way.
Źródło:
Journal of KONES; 2010, 17, 3; 155-164
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problems of determining mean indicator pressure of piston combustion engines from developed indicator diagrams
Autorzy:
Monieta, J.
Powiązania:
https://bibliotekanauki.pl/articles/244070.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
marine diesel engines
indicator diagrams
mean indicated pressure
Opis:
The paper presents methods for processing and analysis of in-cylinder pressure course in the combustion chamber of marine engines. In literature are described determinate methods ofmean indicator pressure from closed diagrams, with are but rarely recorded than developed diagrams. There have been showed on limitations occurrence at measurements fast-changed pressures of marine diesel engines in operating conditions and measuring errors the attendants. Mean indicated pressure determined from the indicated timing or angular pressure courses in the cylinders is still a reliable diagnostic symptom. The paper presents too the results of experimental measurement of in-cylinder pressure signals, medium speed marine engines with application resistive sensor and using the photo-optical sensor of crankshaft position, and without the marker position of the crankshaft. Not always possible to altach the marker for the position of the crankshaft, and even there is no way of stopping the engine when you need to diagnose it. The top dead centre of the piston can be determined then analytically. The work developed a method of determining the mean indicated pressure of the developed indicator diagrams. Based on calculations ofmean indicator pressure made many of diagnosis of the medium speed marine diesel engines in the operating conditions.
Źródło:
Journal of KONES; 2010, 17, 3; 301-306
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efficiency of diesel engine fuelled with biofuels of second generation biox
Autorzy:
Struś, M.
Rewolte, M.
Rogula, J.
Powiązania:
https://bibliotekanauki.pl/articles/243380.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
biofuels
Bioxdiesel
Diesel engines
engine test
drive test
Opis:
Paper presents schematic description of the research covering production mechanism of Fatty Acid Ethyl Esters (FAEE) from waste vegetable and animal fats, which are creating a base for multi-component fuel BIOXDIESEL as well as results of physical, chemical analysis and results of engine and vehicles tests. The characteristic of wasted material used for production of fatty acid ethyl esters is showed. Cybernetic chain of biofuel BIOXDIESEL, system analysis and structure and scheme of the chemical reaction of Ethanol esterification of fatty acids is presented. Basic properties of exemplary BIOXDIESEL and Diesel fuel were compared. Caloric values of investigated BIOXDIESELS are shown. Mixtures of the BIOXDIESEL fuels with various composition have been tested and compared with Diesel fuel during engine tests on the engine test bench, vehicle test dyno and drive tests. The diesel engines of Fiat 1.3 Multijet, Mercedes300D, Landrover and ADCR compression ignition engine were tested with biofuels. Functional schema of the measurement set up is described. Cyclodynes obtained during testing of the ADCR engine fuelled with Diesel and BIOXDIESEL fuels with their centres of gravity are presented. Obtained and described results in the form of tables and graphs can be summarized with conclusions, that the performance of engines fuelled with BIOX-DIESELS is similar to engines fuelled with Diesel fuel.
Źródło:
Journal of KONES; 2015, 22, 4; 311-317
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Particle filter test procedure and quality standard for diesel engines
Autorzy:
Mayer, A.
Czerwinski, J.
Kasper, M.
Leutert, G.
Heeb, N.
Ulrich, A.
Jaussi, A.
Powiązania:
https://bibliotekanauki.pl/articles/242255.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
diesel engines
particle filters
quality air standards
air pollution
Opis:
A new approach is needed to test particle filters for retrofitting Diesel engines. Considering the toxicity of the particles as also the physical and chemical attributes of particle filters, the optimal scheme is to test the components themselves independent of the deployment. That scheme ensures the highest effectiveness with least effort. It also enables evaluation of worst-case situations and assesses the hazards of secondary emissions. The Swiss standard SNR 277 205, which mandates the VERT test procedure, is a first step in that direction. Occupational health specialists have studied the toxicity of ultraflne particles for more than 100 years. Extremely toxic are the particles intruding into the lung. Larger particles, which are always naturally present, are intercepted in the upper respiratory paths. The body then expels these larger particles rapidly via the mucus and cilia. The new manmade particles less-than l mi m, however massively intrude into the fine pulmonary alveoli, which do not have the cleansing mechanism. The targeted efficiencies for evaluating modern filters are evident from the progress achieved. Many filters have filtration rates exceeding 99.9%, albeit the directives [4] only require 97%.
Źródło:
Journal of KONES; 2009, 16, 2; 305-314
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies