Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Cho, K. J." wg kryterium: Autor


Wyświetlanie 1-6 z 6
Tytuł:
Application of an artificial neural network and morphing techniques in the redesign of dysplastic trochlea
Autorzy:
Cho, K. J.
Müller, J. H.
Erasmus, P. J.
Dejour, D.
Scheffer, C.
Powiązania:
https://bibliotekanauki.pl/articles/307312.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
artificial neural network
trochlea redesign
trochlear dysplasia
trochleoplasty
trochlea morphing
sztuczna sieć neuronowa
bloczek
biomechanika
Opis:
Segmentation and computer assisted design tools have the potential to test the validity of simulated surgical procedures, e.g., trochleoplasty. A repeatable measurement method for three dimensional femur models that enables quantification of knee parameters of the distal femur is presented. Fifteen healthy knees are analysed using the method to provide a training set for an artificial neural network. The aim is to use this artificial neural network for the prediction of parameter values that describe the shape of a normal trochlear groove geometry. This is achieved by feeding the artificial neural network with the unaffected parameters of a dysplastic knee. Four dysplastic knees (Type A through D) are virtually redesigned by way of morphing the groove geometries based on the suggested shape from the artificial neural network. Each of the four resulting shapes is analysed and compared to its initial dysplastic shape in terms of three anteroposterior dimensions: lateral, central and medial. For the four knees the trochlear depth is increased, the ventral trochlear prominence reduced and the sulcus angle corrected to within published normal ranges. The results show a lateral facet elevation inadequate, with a sulcus deepening or a depression trochleoplasty more beneficial to correct trochlear dysplasia.
Źródło:
Acta of Bioengineering and Biomechanics; 2014, 16, 2; 75-84
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study on Propagation Property of Fatigue Crack at Composite with Another Material
Autorzy:
Choi, K. K.
Cho, J. U.
Powiązania:
https://bibliotekanauki.pl/articles/353600.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
fatigue crack propagation
composite
matrix
another material
crack propagation
compact tension specimen CT
Opis:
In this study, the fatigue crack propagation in composite material is investigated by experimental result. When another material exists at fatigue crack propagation in case of composite, the durability against fatigue crack is smaller or greater than in case of matrix without another material. As another material is composite material, it refers to steel or material. Another material influences the crack propagation. As the experimental results can be agreed with simulation data, all experimental data in this study are verified. These experimental and analysis results can be applied into real field effectively. The estimation of safety design and life will be of great value industrially.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1363-1366
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Study On Fracture Property Of Double Cantilever Beam Specimen With Aluminum Foam
Doświadczalne badanie pękania mimośrodowo rozciąganej próbki z bocznym karbem wykonanej z piany aluminiowej
Autorzy:
Kim, Y. C.
Choi, H. K.
Cho, J. U.
Powiązania:
https://bibliotekanauki.pl/articles/351465.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminium foam
double cantilever beam
fracture energy
adhesively bonded structure
piana aluminiowa
podwójna belka wspornikowa
energia pękania
Opis:
This study aims to investigate double cantilever beam specimen with aluminum foam bonded by spray adhesive to investigate the fracture strength of the adhesive joint experimentally. The fracture energy at opening mode is calculated by the formulae of British Engineering Standard (BS 7991) and International Standard (ISO 11343). For the static experiment, four types of specimens with the heights (h) of 25 mm, 30 mm, 35 mm and 40 mm are manufactured and the experimental results are compared with each other. As the height becomes greater, the fracture energy becomes higher. After the length of crack reaches 150 mm, the fracture energy of the specimen (h=35 mm) is greater than that of the specimen (h=40 mm). Fatigue test is also performed with DCB test specimen. As the height decreases, the fracture energy becomes higher. By the result obtained from this study, aluminum foam with adhesive joint can be applied to actual composite structure and its fracture property can possibly be anticipated.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1151-1154
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Anther and microspore cultures of barley and wheat
Autorzy:
Kasha, K J
Ziauddin, A
Cho, U H
Simion, E
Petroski, R
Cistue, L
Powiązania:
https://bibliotekanauki.pl/articles/2046611.pdf
Data publikacji:
1997
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
transformation
isolated microspore
doubled haploid
wheat
microspore culture
barley
anther culture
Opis:
This paper briefly cites the various procedures for the production of doubled haploids in barley and wheat. Various associated terms are defined and the factor involved in haploid production are outlined. Isolated microspore cultures offer some advantages over anther culture. Our current procedures for isolated microspore culture of barley and wheat are presented and compared.
Źródło:
Journal of Applied Genetics; 1997, 38, 4; 373-380
1234-1983
Pojawia się w:
Journal of Applied Genetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of Carbon Nanotubes On The Properties Of Spark Plasma Sintered ZrO2/CNT Composites
Wpływ nanorurek węglowych na właściwości spiekanych metodą sps kompozytów ZrO2/CNT
Autorzy:
Shim, D. H.
Jung, S. S.
Kim, H. S.
Cho, H.
Kim, J. K.
Kim, T. G.
Yoon, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/351266.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
CNT
ZrO2
composite
SPS
kompozyty
Opis:
Zirconia matrix ZrO2/CNT composite materials reinforced with multiwall carbon nanotubes were fabricated using a spark plasma sintering technique. The effects of the amount of CNTs addition, sintering temperature and sintering pressure on the properties of the resulting ZrO2/CNT composites were examined. 0 to 9 vol. % CNTs were dispersed in zirconia powder, and the resulting mixture was sintered. The electrical conductivity, hardness, flexural strength, and density were measured to characterize the composites. The friction and wear properties of the composites were also tested. The flexural strength and friction coefficient of the composites were improved with up to 6 vol.% of CNT addition and the flexural strength showed a close relationship with the relative density of the composite. The electrical conductivity increased with increasing proportion of the CNTs, but the efficiency was reduced at more than 6 vol.% CNTs.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1315-1318
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and Characterization of CoCrFeNiMn High Entropy Alloy Powder Processed by Gas Atomization
Autorzy:
Park, T. G.
Lee, S. H.
Lee, B.
Cho, H. M.
Choi, W. J.
Kim, B. S.
Shin, K. S.
Kim, T.-S.
Powiązania:
https://bibliotekanauki.pl/articles/353649.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high entropy alloy
gas atomization
spark plasma sintering
CoCrFeNiMn
Opis:
In this study, precisely controlled large scale gas atomization process was applied to produce spherical and uniform shaped high entropy alloy powder. The gas atomization process was carried out to fabricate CoCrFeNiMn alloy, which was studied for high ductility and mechanical properties at low temperatures. It was confirmed that the mass scale, single phase, equiatomic, and high purity spherical high entropy alloy powder was produced by gas atomization process. The powder was sintered by spark plasma sintering process with various sintering conditions, and mechanical properties were characterized. Through this research, we have developed a mass production process of high quality and spherical high entropy alloy powder, and it is expected to expand applications of this high entropy alloy into fields such as powder injection molding and 3D printing for complex shaped components.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 1055-1059
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-6 z 6

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies