Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "vehicle range" wg kryterium: Temat


Wyświetlanie 1-14 z 14
Tytuł:
Range and acceleration analyze of an electric driven city car with advanced energy storage
Autorzy:
Juda, Z.
Powiązania:
https://bibliotekanauki.pl/articles/242384.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
electric vehicle
DC motor
supercapacitor
vehicle range
simulation
Opis:
For short distance (neighborhood) city transport of people, electric driven vehicle with advanced energy storage and electronic control system could assure fulfill essential requirements. range, acceleration ability and grade ability of electric driven small size city vehicle depend on: total vehicle mass, energy storage type and size, vehicle exploitation conditions (motorway, city traffic). Energy storage type and size optimization and full utilization of regenerative braking system leads to significant amount energy saving. Regenerative braking is particularly important in city traffic, where a lot of acceleration/braking cycles occur. Advanced secondary energy source consist of electrochemical battery and stack of supercapacitors. Using supercapacitors as an additional energy source makes it possible to improve battery life cycle and simultaneously to decrease the exploitation costs of electric vehicle. Short charging and discharging times of supercapacitors give ability to quick accept large amount of energy. In order to cooperate with batteries, a power electronic converter is necessary. Knowledge of vehicle energetic parameters could be obtained by model based simulation than verified by research testing. To estimating the energy consumption, energy recovery, range, acceleration and grade ability, simulation in MATLAB environment has been performed applying special low speed vehicle drive cycle based on ECE-15 driving cycle. The results of simulation are presented in this paper
Źródło:
Journal of KONES; 2009, 16, 2; 209-215
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical evaluation of the effect of operating parameters on electric vehicle energy consumption and driving range
Autorzy:
Gołębiewski, W.
Lisowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/246974.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
energy consumption
vehicle-driving range
electric car
Opis:
The paper presents theoretical evaluation of the effect of operating parameters on electric vehicle energy consumption and driving range. The objective of this study was to analyse the effect of temperature (at constant pressure) and traction properties on the energy consumption and driving range related to it of a chosen electric vehicle. The test methods assumed the analysis of parameters of the test object based on a simulation model. The evaluation involved a Nissan Leaf vehicle equipped with an electric motor, the torque characteristic curve of which was used in the test model. The values of basic and additional resistance to motion for the adopted conditions: external temperature and pressure-dependent air density, and vehicle technical parameters, such as its weight, capacitance of batteries, vehicle dimensions, type of drive system, drag coefficient and tyre dimensions, were determined. Basing on these data and the characteristic curve of engine torque, electric vehicle energy consumption and driving range were determined. The following relationships were obtained because of the analysis: vehicle energy consumption / vehicle driving range and external temperature, vehicle energy consumption / vehicle driving range and vehicle acceleration, vehicle energy consumption / vehicle driving range and acclivity slope. It was proven that the operating parameters could considerably increase the energy consumption and the driving range of an electric vehicle.
Źródło:
Journal of KONES; 2016, 23, 4; 117-125
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design considerations of a linear generator for a range extender application
Autorzy:
Seo, U.
Riemer, B.
Appunn, A.
Hameyer, K.
Powiązania:
https://bibliotekanauki.pl/articles/141103.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
linear generator
free piston engine
range extender electric vehicle
Opis:
The free piston linear generator is a new range extender concept for the application in a full electric vehicle. The free piston engine driven linear generators can achieve high efficiency at part and full load which is suitable for the range extender application. This paper presents requirements for designing a linear generator deduced from a basic analysis of a free piston linear generator.
Źródło:
Archives of Electrical Engineering; 2015, 64, 4; 581-592
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative analysis of frontal zone of deformation in vehicles with self-supporting and framed bodies
Autorzy:
Prochowski, L.
Żółtowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/247110.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
road safety
vehicle safety
crash tests
body deformation range
Opis:
The work considers changes occurred in the features of the supporting structure in three categories of cars, namely: with the self-supporting body, framed body an intermediate structures between these two solutions. The area of analysis includes the length of deformation (crush) of the front al part of the car after collision with a rigid obstacle (barrier). The range of deformation is a significant factor of the passive car safety and indicates the efficiency of fulfilling the protective function for the passengers. The work shows absolute and relative (percentage and unit) variations of the car deformation, depending on the year of manufacture, including the period of 1980 - 2010. Marked trend lines indicated general nature of the deformation range variations together with the improvement of the car supporting system structures. The course of the trend line has been calculated on the basis of average deformation length values, calculated in defined periods of vehicle manufacture. Selected sections of time result from the division of the period of analysis 1980 - 2010 into six parts. The analysis of the deformation length of the frontal part of passenger cars, SUVs and pickups has been combined with simultaneous evaluation of total car length variations and their weight values. The car weight directly affects the kinetic energy of the impact so it has a significant influence on the range of deformation of the car front during collision with an obstacle.
Źródło:
Journal of KONES; 2011, 18, 4; 397-407
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical analysis of the effect of traction parameters on electric vehicle energy consumption and driving range
Analiza teoretyczna wplywu parametrow trakcyjnych na zuzycie energii i zasieg pojazdu elektrycznego
Autorzy:
Golebiewski, W.
Powiązania:
https://bibliotekanauki.pl/articles/792024.pdf
Data publikacji:
2016
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
traction parameter
electrical vehicle
driving range
energy consumption
motor vehicle
carbon dioxide emission
theoretical analysis
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2016, 16, 1
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multi-parametric and multi-objective thermodynamic optimization of a spark-ignition range extender ICE
Autorzy:
Toman, R.
Brankov, I.
Powiązania:
https://bibliotekanauki.pl/articles/243112.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
Range Extender
hybrid electric vehicle
battery electric vehicle
internal combustion engine
spark ignition
thermodynamic optimization
genetic algorithm
Opis:
The current legislation pushes for the increasing level of vehicle powertrain electrification. A series hybrid electric vehicle powertrain with a small Range Extender (REx) unit – comprised of an internal combustion engine and an electric generator – has the technical potential to overcome the main limitations of a pure battery electric vehicle: driving range, heating, and air-conditioning demands. A typical REx ICE operates only in one or few steady-states operating points, leading to different initial priorities for its design. These design priorities, compared to the conventional ICE, are mainly NVH, package, weight, and overall concept functional simplicity – hence the costeffectiveness. The design approach of the OEMs is usually rather conservative: parting from an already-existing ICE or components and adapting it for the REx application. The fuel efficiency potential of a one-point operation of the REx ICE is therefore not fully exploited. This article presents a multi-parametric and multi-objective optimization study of a REx ICE. The studied ICE concept uses a well-known and proven technology with a favourable production and development costs: it is a two-cylinder, natural aspirated, port injected, four-stroke SI engine. The goal of our study is to find its thermodynamic optimum and fuel efficiency potential for different feasible brake power outputs. Our optimization tool-chain combines a parametric GT-Suite ICE simulation model and modeFRONTIER optimization software with various optimization strategies, such as genetic algorithms, gradient based methods or various hybrid methods. The optimization results show a great fuel efficiency improvement potential by applying this multi-parametric and multi-objective method, converging to interesting short-stroke designs with Miller valve timings.
Źródło:
Journal of KONES; 2018, 25, 3; 459-466
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simultaneous synthesis-immobilization of nano ZnO on perlite for photocatalytic degradation of an azo dye in semi batch packed bed photoreactor
Autorzy:
Khani, A.
Sohrabi, M.R.
Powiązania:
https://bibliotekanauki.pl/articles/778943.pdf
Data publikacji:
2012
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Natural gas vehicle
driving range
compressed natural gas (CNG)
thermodynamic properties
CNG fuelling station
Opis:
A novel, simple and simultaneous synthesis-immobilization of nano ZnO on perlite (nZnO-P) as a photocatalyst for photocatalytic degradation of Acid orange 7 (AO7) in aqueous solution was investigated. The effect of operational parameters such as initial dye concentration, initial pH, flow rate, photocatalyst granule size, temperature and the kinetic of the removal of AO7 in terms of the Langmuir-Hinshelwood model in a designed semi batch packed bed photoreactor connected to an on-line sampling UV-Vis spectrophotometer was studied. The results showed that AO7 removal efficiency increased with nZnO-P using the designed setup and the proposed photocatalyst was more efficient than TiO2 as a standard catalyst. Our results confirmed the pseudo-first-order kinetics model. The values of the adsorption equilibrium constant, KAO7, the kinetic rate constant of surface reaction, kc, and the activation energy (Ea) were found to be 0.57 (mg.l-1)-1, 0.41 mg.l-1.min-1 and 11.44 kJ/mol, respectively.
Źródło:
Polish Journal of Chemical Technology; 2012, 14, 4; 69-76
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of important parameters on the natural gas vehicles driving range
Autorzy:
Farzaneh-Gord, M.
Rahbari, H.R.
Nikofard, H.
Powiązania:
https://bibliotekanauki.pl/articles/778945.pdf
Data publikacji:
2012
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Natural gas vehicle
driving range
compressed natural gas (CNG)
thermodynamic properties
CNG fuelling station
Opis:
One of the most important issues regarding Natural Gas Vehicles (NGVs) is the Driving Range, chich is defi ned as capability of a NGV to travel a certain distance after each refueling. The Driving Range is a serious obstacle in the development and growth of NGVs. Thus the necessity of studying the effects of various parameters on the Driving Range could be realized. It is found that the on-board storage capacity and the natural gas heating value have the greatest effect on the Driving Range. The charge mass of NGV cylinders is varied due to the natural gas composition and the fi nal in-cylinder values (temperature and pressure). Underfi lling of NGV cylinders, during charging operations, is a result of the elevated temperature which occurs in the NGV storage cylinder, due to compression and Rother processes could be overcome by applying extensive over-pressurization of the cylinder during the fuelling operation. Here, the effects of the most important parameters on the Driving Range have been investigated. The parameters are natural gas composition, engine effi ciency and fi nal NGV on-board in-cylinder temperature and pressure. It is found that, the composition has big effects on the Driving Range. The results also show that as fi nal in-cylinder pressure decreases (or temperature increases), the Driving Range will be increased.
Źródło:
Polish Journal of Chemical Technology; 2012, 14, 4; 61-68
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Modelling, Simulation and Validation of the SPS and PS Systems under 6 kg TNT Blast Shock Wave
Autorzy:
Świerczewski, M.
Klasztorny, M.
Dziewulski, P.
Gotowicki, P.
Powiązania:
https://bibliotekanauki.pl/articles/386965.pdf
Data publikacji:
2012
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
pojazd wojskowy
fala uderzeniowa
symulacja cyfrowa
test
military vehicle
passive shield
range stand
protected plate
blast shock wave
numerical modelling
simulation
range tests
validations
Opis:
The paper develops a new methodology of FE modelling and simulation of the SPS and SP systems under 6 kg TNT blast shock wave. SPS code refers to the range stand – protected plate – protective shield ALF system, while PS code refers to the range stand – protected plate system. The multiple – use portable range stand for testing protective shields against blast loadings was developed under Research and Development Project No. O 0062 R00 06. System SPS uses high strength M20 erection bolts to connect the protective shield to the protected plate. In reference to the SPS system, validation explosion test was performed. It has pointed out that the developed methodology of numerical modelling and simulation of SPS and PS systems, using CATIA , HyperMesh, LS-Dyna, and LS-PrePost software, is correct and the ALF protective shield panels have increased blast resistance and high energy – absorption capability
Źródło:
Acta Mechanica et Automatica; 2012, 6, 3; 77-87
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Driving Style on Battery Electric Vehicle Range
Wpływ stylu jazdy na zasięg samochodu elektrycznego
Autorzy:
Błaszczyk, Piotr
Kopeć, Michał
Powiązania:
https://bibliotekanauki.pl/articles/2203475.pdf
Data publikacji:
2023
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
battery electric vehicle
driving style
driving range
energy consumption
samochód elektryczny
styl jazdy
zasięg pojazdu
zużycie energii
Opis:
The demand for electric vehicles is high due to the fact of their low travel costs. Meanwhile, an increase in the car driving range is expected. Hence, this paper examines different concepts related to driving a battery electric vehicle. The driving scenarios were divided into two parts. The first part consisted of four stages: driving in a mixed cycle, charging the battery, driving a very short distance, and driving distances that were within the maximum theoretical range of the batteries. The second part involved driving a distance until the range extender system was activated. The outcomes of these experimental investigations are described and the key findings are presented in the discussion.
Popyt na pojazdy elektryczne jest duży ze względu na niskie koszty podróży. Jednocześnie spodziewany jest wzrost zasięgu. Dlatego w niniejszym artykule przeanalizowano różne koncepcje związane z prowadzeniem pojazdu elektrycznego. Scenariusze jazdy zostały podzielone na dwie części. Pierwsza część składała się z czterech etapów: jazdy w cyklu mieszanym, ładowania pakietu bateryjnego, przejazdu bardzo krótkiego odcinka oraz przejazdu odcinków o różnej długości, mniejszej niż maksymalny zasięg teoretyczny. Druga część polegała na przejechaniu odcinka do momentu aktywacji systemu REx. Wyniki przeprowadzonych badań zostały zaprezentowane, a kluczowe ustalenia przedstawiono w sekcji dyskusji.
Źródło:
Pomiary Automatyka Robotyka; 2023, 27, 1; 85--92
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
S-band and Ku-band SAR system development for UAV-based applications
Autorzy:
Kaniewski, Piotr
Komorniczak, Wojciech
Leśnik, Czesław
Cyrek, Jacek
Susek, Waldemar
Serafin, Piotr
Łabowski, Michał
Powiązania:
https://bibliotekanauki.pl/articles/221666.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
unmanned aerial vehicle
UAV
synthetic aperture radar
SAR
Range–Doppler algorithm
RDA
imagery intelligence system
IMINT system
Opis:
This paper describes a synthetic aperture radar system for tactical-level imagery intelligence installed on board an unmanned aerial vehicle. Selected results of its tests are provided. The system contains interchangeable S-band and Ku-band linear frequency-modulated, continuous wave radar sensors that were built within a frame of a research project named WATSAR, conducted by the Military University of Technology and WB Electronics S.A. One of several algorithms of radar image synthesis, implemented in the scope of the project, is described in this paper. The WATSAR system can create online and off-line radar images.
Źródło:
Metrology and Measurement Systems; 2019, 26, 1; 53-64
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The creation of energy efficient hybrid vehicles in the Russian Federation
Autorzy:
Karpukhin, A.
Terenchenko, A.
Powiązania:
https://bibliotekanauki.pl/articles/133501.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
hybrid vehicle
range extender
traction battery
energy efficiency
climatic conditions
pojazd hybrydowy
zasięg
bateria trakcyjna
efektywność energetyczna
warunki klimatyczne
Opis:
The paper shows the development of the NAMI Russian State Scientific Research Center associated with advanced research in the field of hybrid vehicles. The stages of design, creation and testing of hybrid vehicles with range extender system. The paper presents the results of bench and road tests of hybrid vehicles with range extender system. The peculiarities of creation and operation of hybrid vehicles for countries with difficult climatic conditions, for example, the Russian Federation.
Źródło:
Combustion Engines; 2017, 56, 1; 145-148
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the internal combustion engine as a range-extender for electric vehicles
Zastosowanie silnika spalinowego w celu zwiększenia zasięgu pojazdów z napędem elektrycznym
Autorzy:
Noga, M.
Powiązania:
https://bibliotekanauki.pl/articles/133991.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
internal combustion engine
electric vehicle
range extender
exhaust emission
noise
vibration
silnik spalinowy
pojazd elektryczny
zasięg
emisja spalin
hałas
drgania
Opis:
The article reviews the available solutions of range-extenders with internal combustion engines designed for use in electric vehicles. The using of the on-board range-extender aims to increase the range of an electric vehicle, which is still significantly limited. This fact is connected with relatively small capacity of currently used electric energy storage systems. The development of secondary cells with performances allowing the driving range of electric car to be comparable to average car with combustion engine still faces considerable difficulties. For this reason, the use of the internal combustion engine for propulsion of range-extenders for electric vehicles becomes nowadays more and more popular. In this paper range-extenders from the following companies are described: FEV Aachen, Kolbenschmidt Pierburg together with FEV, AVL list GmbH, Lotus Engineering with Fagor Ederlan, Mahle Powertrain Ltd. and General Motors for Chevrolet Volt / Opel Ampera. High efficiency, low exhaust emission and low noise & vibration obtained with a compact dimensions are priority in the development of these devices.
W artykule dokonano przeglądu dostępnych rozwiązań pomocniczych generatorów prądu o napędzie spalinowym z zastosowaniem dla pojazdów elektrycznych. Użycie dodatkowego pokładowego generatora spalinowego ma na celu zwiększenie zasięgu pojazdu elektrycznego, który w dalszym ciągu jest w istotny sposób ograniczony. Fakt ten jest związany z ograniczoną pojemnością dostępnych akumulatorów energii elektrycznej. Opracowanie ogniw o parametrach pozwalających samochodom elektrycznym uzyskać zasięg jazdy porównywalny z przeciętnym samochodem z napędem spalinowym napotyka spore trudności. Z tego względu wykorzystanie silnika spalinowego do napędu generatora energii elektrycznej w samochodach konstruowanych pierwotnie jako czysto elektryczne staje się obecnie coraz powszechniejsze. W materiale opisano m.in. konstrukcje generatorów energii elektrycznej opracowane przez FEV Aachen, Kolbenschmidt Pierburg wspólnie z FEV, AVL list GmbH, Lotus Engineering razem z Fagor Ederlan, Mahle Powertrain Ltd. oraz General Motors dla pojazdu Chevrolet Volt / Opel Ampera. Priorytetem w konstrukcji tego typu urządzeń jest uzyskanie wysokiej sprawności, niskiej emisji spalin, hałasu i drgań przy zachowaniu kompaktowych wymiarów.
Źródło:
Combustion Engines; 2013, 52, 3; 781-786
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of the range extender for a 48 V electric vehicle
Autorzy:
Noga, Marcin
Gorczyca, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/133579.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
electric vehicle
range extender
spark ignition engine
overall efficiency
three-way catalyst
pojazd elektryczny
silnik o zapłonie iskrowym
sprawność ogólna
katalizator trójdrożny
Opis:
The article deals with the concept, development and results of preliminary tests of a range extender for an electric light commercial vehicle Melex with a 48 V electrical system. The purpose of the project is to build a prototype of the range extender powered by an internal combustion engine that will increase the range of the vehicle with electric drive, and at the same time will be characterized by a high efficiency and low exhaust emissions. The developed range extender is a combination of a 163cc single-cylinder combustion engine with a generator joined through a ribbed belt transmission. The 3-phase generator from a heavy-duty vehicle was used. In order to match the output voltage of the generator to the system voltage of the electric vehicle, an external adjustable regulator and a rectifier bridge with an increased operating voltage were used. The range extender was attached to a body of the electric vehicle by means of a welded frame made of thin-walled steel profiles. Initial tests of the developed range extender showed its proper interaction with both the lead-acid battery of the vehicle as well as with the nickel-metal hydride battery (NiMH) adapted to 48 V voltage from a hybrid electric vehicle. A maximum output power exceeding 2 kW was obtained. Maximum value of the overall efficiency of the range extender reaches up to 18.8%, which is a high value considering the small size of the used engine and the type of generator. The directions for further development of the range extender were also revealed in this paper.
Źródło:
Combustion Engines; 2019, 58, 2; 113-121
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-14 z 14

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies