Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "temperature sensor" wg kryterium: Temat


Tytuł:
Utilization of telecommunication optical routes to power fiber-optic polarization sensors
Autorzy:
Vyležich, Zdeněk
Kyselák, Martin
Powiązania:
https://bibliotekanauki.pl/articles/2172859.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
power supply
optical route
polarization
temperature sensor
Opis:
A single-mode telecommunication optical route can be used for reliable power supplies of a remote non-electric temperature fiber-optic polarization sensor, but the optical route, due to many physical factors, affects an immediate state of polarization during the transmission. This negative phenomenon changes the sensitivity of the sensor itself. The thesis proposes two main approaches to solving that problem. The first approach is based on the suitable connection of a depolarizer and linear polarizers. The second approach is based on signal interference, which takes place in a polarization-maintaining fiber coupler. This article also evaluates the advantages and disadvantages of the two approaches and graphically demonstrates the functionality of the fiber-optic sensor, which was tested by applying a container with water of different temperatures. A big advantage of this type of sensor is that it is not necessary to have components, that are dependent on electricity, near the monitored place, where there may be no access to electricity, or the place may be sensitive to an electric charge. Paper demonstrates the possibility of successfully powering the non-electric sensor via a classical optical route.
Źródło:
Optica Applicata; 2022, 52, 4; 565--574
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Passive UHF RFID-enabled sensor system for detection of products exposure to elevated temperature
Autorzy:
Janeczek, K.
Jakubowska, M.
Kozioł, G.
Jankowski-Mihułowicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/220717.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
RFID
temperature sensor
printed antenna
screen printing
printed electronics
Opis:
Temperature change is one of key factors which should be taken into account in logistics during transportation or storage of many types of goods. In this study, a passive UHF RFID-enabled sensor system for elevated temperature (above 58°C) detection has been demonstrated. This system consists of an RFID reader and disposable temperature sensor comprising an UHF antenna, chip and temperature sensitive unit. The UHF antenna was designed and simulated in an IE3D software. The properties of the system were examined depending on the temperature level, type of package which contains the studied objects and the type of antenna substrate.
Źródło:
Metrology and Measurement Systems; 2013, 20, 4; 591-600
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A weakly coupled multi-core fibre-based Michelson interferometer composed of an in-fibre coupler
Autorzy:
Mumtaz, Farhan
Dai, Yutang
Wenbin, Hu
Abbas, Lashari Ghulam
Parveen, Rashda
Ashraf, Muhammad Aqueel
Powiązania:
https://bibliotekanauki.pl/articles/2063883.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Elektryków Polskich
Tematy:
Michelson interferometer
in-fibre coupler
seven core fibre
temperature sensor
Opis:
A compact temperature measuring device using a weakly coupled multi-core fibre in the Michelson interferometer structure is proposed and experimentally demonstrated. The device is manufactured by an easy and simple splicing approach which consists of a multi-core fibre segment and an in-fibre coupler. In-fibre coupler is made of a cascaded single-mode fibre and multi-core fibre balls. It enhances the interference phenomenon of light nergy between the central core and the outer cores of a multi-core fibre. The sensor shows a high quality fringe visibility of about 14–18 dB in the wavelength spectrum. Multi-core structure presents multi-path interferences and exhibits a maximum temperature sensitivity of 70.6 pm/°C in the range of 20–90°C with an insensitive response to the refractive index in the range of 1.334 to 1.354. The device has the advantages of compact size, easy manufacturing, and it solves cross-sensitivity between temperature and refractive index making it an authentic real-time temperature monitoring solution.
Źródło:
Opto-Electronics Review; 2021, 29, 4; 117--125
1230-3402
Pojawia się w:
Opto-Electronics Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of dual-core photonic crystal fiber based temperature and pressure sensor for oceanic applications
Autorzy:
Jegadeesan, Subramani
Dhamodaran, Muneeswaran
Sri Shanmugapriya, Swaminathan
Powiązania:
https://bibliotekanauki.pl/articles/175134.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
dual core
photonic crystal fiber
birefringence
temperature sensor
pressure sensor
finite element method
Opis:
In this paper, a microstructured optical fiber with dual core was proposed which is known as photonic crystal fiber. Specific optical properties of a dual-core photonic crystal fiber were used to obtain high birefringence, small beat length, flattened dispersion, for different values of structural parameters varied over a wide range of wavelength and analyzed for application such as temperature and pressure sensors. The sensitivity of the temperature sensor is calculated as 20 pm/°C for 6 cm fiber, the sensitivity of the pressure sensor for a range from 0 to 1000 kPa is calculated as –10.5 nm/MPa.
Źródło:
Optica Applicata; 2019, 49, 2; 249-264
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The study of temperature measurement based on the transmission of fixed wavelengths for helical long-period grating
Autorzy:
Bai, Yunfeng
He, Zelong
Dang, Suihu
Powiązania:
https://bibliotekanauki.pl/articles/2060686.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
helical long-period grating
fixed wavelength
dual-wavelength ratio
temperature sensor
Opis:
This research involves a fixed wavelength and dual-wavelength ratio temperature measurement for helical long-period grating. There are two resonant dips near 1475 and 1520 nm, with the pitch length 782 μm. The temperature sensitivity of resonance wavelengths is about 0.06 nm/°C. Both theoretical simulation and experiment results show that the transmission of a fixed wavelength linearly changes with the temperature. It has a high application value for measuring temperature. Besides, the dual-wavelength ratio is studied to eliminate the influence of light source. The temperature sensitivity of transmission intensity ratio of I1469.6nm/I0 and I1469.6nm/I1526.5nm are about 1.0076/°C and 0.0155/°C, respectively, so the dual-wavelength ratio is more practical. And the 0.0155 times intensity change could be much more easily measured than the 0.06 nm wavelength change for each degree Celsius. So the dual-wavelength ratio of the helical long-period gratings is very suitable for temperature sensors.
Źródło:
Optica Applicata; 2022, 52, 1; 129--137
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of selected factors on shaping of milk temperature during cow machine milking
Wpływ wybranych czynników na kształowanie się temperatury mleka w czasie doju maszynowego krów
Autorzy:
Jędruś, A.
Beba, J.
Powiązania:
https://bibliotekanauki.pl/articles/334064.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
temperature sensor
diagnostics
machine milking
temperature
milk
czujnik temperatury
diagnostyka
dój maszynowy
temperatura
mleko
Opis:
In the research the assessment of the impact of sensors found in the milking unit during the process of machine cow milking on selected metrological properties of temperature sensors installed in a milking cluster has been done. The analyses have been made on the basis of the temperature curves of milk flow in cows’ udder quarters obtained during the cowshed tests. In the research a microprocessor measuring system has been used. The system has been designed in the Institute of Biosystem Engineering at the University of Life Sciences in Poznan. The system is cooperating with thermistors installed in teat cups. The results of variance analysis has shown statistically highly essential influence of the thermistor’s initial temperature and sort of a quarter on the time of establishing the maximum milk temperature.
W pracy dokonano oceny wpływu czynników występujących na stanowisku udojowym w czasie doju maszynowego krów na wybrane własności metrologiczne czujników temperatury zamontowanych w aparacie udojowym. Analiz dokonano w oparciu o uzyskane w trakcie testów oborowych termogramy spływu mleka z ćwiartek wymion krów. Do badań wykorzystano opracowany w Instytucie Inżynierii Biosystemów Uniwersytetu Przyrodniczego w Poznaniu mikroprocesorowy system pomiarowy współpracujący z termistorami zamontowanymi w kubkach udojowych. Wyniki analizy wariancji wykazały statystycznie wysoko istotny wpływ temperatury początkowej termistora oraz rodzaju ćwiartki na czas ustalenia wartości maksymalnej temperatury mleka.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2014, 59, 1; 48-51
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Automatic measurement of time constant for temperature sensors
Autorzy:
Boguta, A.
Horynski, M.
Powiązania:
https://bibliotekanauki.pl/articles/793627.pdf
Data publikacji:
2013
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
time constant
temperature sensor
automatic measurement
quick cooling
measuring cylinder
heat capacity
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2013, 13, 1
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fiber Bragg grating-based high temperature sensor and its low cost interrogation system with enhanced resolution
Autorzy:
Mamidi, V R
Kamineni, S
Ravinuthala, L N S P
Madhuvarasu, S S
Thumu, V R
Pachava, V R
Putha, K
Powiązania:
https://bibliotekanauki.pl/articles/949414.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fiber Bragg grating (FBG)
long period grating
fiber optic temperature sensor
optical intensity modulation
Opis:
A fiber Brag grating-based high temperature sensor together with a low cost, high speed and compact size interrogation system using a long period grating was designed, developed and tested. The designed sensor measures the temperature from room temperature to 550 °C. The sensor head was configured by encapsulating an fiber Brag grating (type-I) of Bragg resonance wavelength at 1552.88 nm in a capillary tube made of copper. Long period grating with peak transmission loss at 1550 nm was employed to convert the wavelength information from fiber Brag grating into an intensity modulated signal. Temperature related optical intensity information was again converted into its equivalent electrical signal by using a photodiode. The achieved resolution of the sensor was found to be 0.5 °C.
Źródło:
Optica Applicata; 2014, 44, 2; 299-308
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parallel temperature measurement system for electric vehicle
Równoległy pomiar temperatury akumulatorów w pojazdach elektrycznych
Autorzy:
Wojtkowski, W.
Lewczuk, R.
Powiązania:
https://bibliotekanauki.pl/articles/269025.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
Digital temperature sensor
temperature measurement
CAN bus
1-Wire bus
cyfrowy czujnik temperatury
pomiary temperatury
CAN
1-Wire
Opis:
A parallel temperature measurement system for monitoring a battery stack in an electric vehicle is presented in the paper. The proposed system utilizes parallel multi-channel temperature measurements with digital temperature sensors operating on separate serial buses. An FPGA device collects data from sensors and translates it into CAN bus frames. The CAN bus is incorporated for communication with car Battery Management System. The described system can parallel measure 8 temperatures but it can be extended in case of additional needs. The structure of the system as well as particular devices are described in the paper. Selected results of experimental investigations which show proper operation of the system are presented as well.
W artykule przedstawiono system równoległego pomiaru temperatury zestawu akumulatorów stosowanego w pojazdach elektrycznych EV lub hybrydowych HEV. Podczas ładowania lub rozładowywania akumulatorów Li-ion, może dochodzić do nadmiernego nagrzewania a nawet do pożaru. Aby tego uniknąć stosuje się układy nadzorowania akumulatorów pełniące także funkcje balansowania ładunku. Takie układy potrzebują do działania informacji o temperaturze zewnątrznej poszczególnych akumulatorów. Cyfrowe czujniki temperatury wyposażone w interfejs szeregowy komunikują się z procesorem nadzorującym w sposób sekwencyjny. Przy większej liczbie czujników czas odczytu wszystkich wartości jest nadmiernie wydłużony. W prezentowanym rozwiązaniu zastosowano oddzielne magistrale szeregowe dla każdego czujnika. W związku z tym czas pełnego odczytu nie zależy od liczby czujników. Aby to było możliwe, wykorzystano układ FPGA z zaimplementowanymi interfejsami 1-Wire. Całość jest kontrolowana przez procesor programowy NIOS, który dodatkowo zapewnia komunikację z systemami pojazdu przez magistralę CAN. W artykule przedstawiono strukturę proponowanego systemu oraz zostały przedstawione wybrane wyniki badań laboratoryjnych.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2017, 54; 237-240
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The control of fan speed using FPGA boards
Sterowanie prędkością wentylatora przy użyciu bezpośrednio programowalnej macierzy bramek (FPGA)
Autorzy:
Daboul, M.
Nouman, Z.
Powiązania:
https://bibliotekanauki.pl/articles/408300.pdf
Data publikacji:
2014
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
fan speed control
FPGA
PWM
VHDL
digital temperature sensor
sterowanie prędkością wentylatora
cyfrowy czujnik temperatury
Opis:
This article describes the implementation of a DC fan controller using a field-programmable gate array (FPGA). Hardware description language (VHDL) is used to design and implement the processor of this controller. The processor is composed of a memory block that has a function of generation a Look up Table (LUT). Data saved in the memory block are used to generate a triangular signal. A carried signal can be added. This signal can be generated from digital temperature sensors. A comparator compares between the triangular signal and the carried signal to generate a Pulse-Width Modulation (PWM) output that controls the fan speed. The fan speed depends on the digital temperature sensor output. When the output signal of the sensor equals the output of the triangular wave, the fan speed is maximal and the temperature is high. This design requires a FPGA board and software ISE 14.4.
Artykuł przedstawia implementację sterownika DC wentylatora używając bezpośrednio programowalnej macierzy bramek - FPGA (ang. Field programmable gate array). Język VHDL (ang. Very High Speed Integrated Circuits Hardware Description Language ) użyto do projektowania i implementacji procesora tego kontrolera. Procesor składa się z bloku pamięci, mającej funkcję generowania struktury nazywanej tablicą (ang. Look up Table – LUT). Dane zapamiętane w bloku pamięci używane są do generowania przebiegów trójkątnych. Komparator porównuje sygnał użyteczny, ten wygenerowany przez cyfrowy czujnik temperatury, z sygnałem trójkątnym, aby sygnał wyjściowy modulowany szerokością impulsu (ang. PWM) regulował prędkość wentylatora. Prędkość wentylatora zależy od sygnału wyjściowego z cyfrowego czujnika temperatury. Kiedy sygnał wyjściowy czujnika jest równy fali trójkątnej, wtedy prędkość wentylatora jest maksymalna a temperatura jest wysoka. Takie projektowanie wymaga FPGA i software ISE 14.4.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2014, 3; 54-57
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problems of temperature sensor checking at the exploitation place with the calibrators usage
Problemy weryfikacji sensorów temperatury na miejscu eksploatacji z wykorzystaniem kalibratorów
Autorzy:
Stadnyk, B
Jacuk, J.
Parakuda, V.
Powiązania:
https://bibliotekanauki.pl/articles/155036.pdf
Data publikacji:
2006
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
kalibrator temperatury
weryfikacja
półprzewodnikowy czujnik temperaturowy
unifikacja charakterystyk przetwarzania
temperature calibrator
verification
semiconducting temperature sensor
unification of transducer characteristics
Opis:
The problems of temperature sensor checking at the exploitation place with the calibrator's usage are presented in this paper. We came to conclusion to fix the moments of entrance and exit to/from a temperature platform that correspondent to phase transition of fixed-point material. The usage of small sized semiconducting sensors which are placed on inner surfaces of temperature calibrator receiving camera is stipulated. The structural scheme, mathematical models and job algorithm of digital thermometer which provide unification of transducer characteristics for semiconducting sensors are described too.
W artykule przeanalizowano problem weryfikacji czujników temperatury w miejscu ich zainstalowania i opracowano podstawową koncepcje jego rozwiązania na podstawie wykorzystania wbudowanych temperaturowych punktów stałych MST-90. W celu ujawnienia momentu nastąpienia przejścia fazowego materiału referencyjnego na tylnej powierzchni komory kalibratora temperatury zainstalowane są dwa półprzewodnikowe mikroczujniki temperatury. Opisano również strukturę, modele matematyczne oraz algorytm przetwarzania termometru cyfrowego, zabezpieczającego unifikację jego charakterystyk.
Źródło:
Pomiary Automatyka Kontrola; 2006, R. 52, nr 12, 12; 38-40
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Telematics based concept focused to avoid engine and vehicle trouble due to overheating
Autorzy:
Szpytko, J.
Udoji, C.
Powiązania:
https://bibliotekanauki.pl/articles/393539.pdf
Data publikacji:
2019
Wydawca:
Polskie Stowarzyszenie Telematyki Transportu
Tematy:
transport telematics
transport device availability
overheating
temperature sensor
telematyka transportu
dostępność urządzenia transportowego
przegrzanie
czujnik temperatury
Opis:
Overheating of vehicles is gradually becoming a common problem especially in tropical areas and during tropical seasons in the world. Although there are so many factors can cause overheating, hot weather is the most common cause of overheating. Coolants and thermostats in the radiator are no longer sufficient anymore. Traditional solutions preventing an engine from becoming overheated are: coolant levels must be maintained and without leaks; the oil level and viscosity must have the required properties; accepted technical conditions of radiator hoses and the radiator fan; the engine temperature must be acceptable. Modern cars are equipped with the systems supporting the operation process. The aim of this article is the concept of a solution that uses telematics to minimize engine failures due to overheating and to increase the operational readiness of transport means.
Źródło:
Archives of Transport System Telematics; 2019, 12, 4; 31-35
1899-8208
Pojawia się w:
Archives of Transport System Telematics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Power semiconductor devices temperature monitoring system
System monitorowania temperatury półprzewodnikowych przyrządów mocy
Autorzy:
Wojtkowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/266661.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
digital temperature sensor
temperature measurement
1-Wire bus
semiconductor power devices
cyfrowe czujniki temperatury
pomiary temperatury
magistrala 1-Wire
półprzewodnikowe przyrządy mocy
Opis:
The temperature measurement system, for parallel monitoring of temperatures of the power semiconductors devices in power converters is presented in the paper. The system was implemented in a power electronics converter for rapid recognition of the power losses level generated by individual power components. This information is important when evaluating system efficiency, current flow symmetry, and allowable output power in a given inverter configuration. The proposed system utilizes parallel multi-channel temperature measurements with digital temperature sensors operating on separate serial 1-Wire buses. FPGA device collects data from the temperature sensors and sends them through wireless interface to a PC terminal. The structure of the system as well as particular devices are described in the paper. Selected results of experimental investigations which show proper operation of the system are presented as well.
W artykule przedstawiono system równoległego pomiaru temperatury półprzewodnikowych przyrządów mocy w przekształtnikach energoelektronicznych. Prezentowany system jest użyteczny podczas badania laboratoryjnego nowych topologii przekształtników energoelektronicznych. System ten umożliwia szybkie wykrycie nadmiernego nagrzewania jednego z monitorowanych przyrządów półprzewodnikowych i jednocześnie może automatycznie włączyć sygnał dźwiękowy oraz przesłać informację do sterownika przekształtnika. Otrzymywana informacja związana z poziomem strat mocy wydzielanej w poszczególnych monitorowanych elementach jest cenna przy badaniu sprawności układu, symetrii rozpływu prądów oraz przy badaniu dopuszczalnej mocy wyjściowej przekształtnika w danej konfiguracji. Cyfrowe czujniki temperatury wyposażone w interfejs szeregowy 1-Wire komunikują się z procesorem nadzorującym w sposób sekwencyjny. Przy większej liczbie czujników czas skanowania wszystkich wartości jest nadmiernie wydłużony. W prezentowanym rozwiązaniu zastosowano oddzielne magistrale szeregowe dla każdego czujnika. W związku z tym czas pełnego odczytu nie zależy od liczby czujników. Aby to było możliwe, wykorzystano układ FPGA z zaimplementowanymi interfejsami 1-Wire. Prezentowany system ułatwia wykrywanie wielu nieprawidłowości występujących w badanym przekształtniku i w przebiegach sterujących, gdyż większość z nich wiąże się z nadmiernym nagrzewaniem zagrożonego przyrządu mocy.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2017, 54; 233-236
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The comparing of the selected temperature sensors compatible with the Arduino platform
Autorzy:
Škultéty, E.
Pivarčiová, E.
Karrach, L.
Powiązania:
https://bibliotekanauki.pl/articles/409599.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
temperature
sensor
measurement
Arduino
Opis:
One of the most frequently measured quantity is temperature, which is also one of the most important physical quantities. Temperature has influence on the almost all states and processes in the nature as well as in technique. A wide range of temperature sensors is currently available on the market. They use different measurement principles and exist in many designs. According to the location of the sensing element in the measured environment, they are divided into two main groups: contact and non-contact. Further, we can divide the temperature sensors according to the physical principle on which they work. The article deals with the analysis and comparison of selected Arduino-compatible contact temperature sensors. The temperature measurement of machine functional nodes and its diagnostics are part of maintenance and engineering diagnostics. At present, NC and CNC machine diagnostics are an important trend in machine condition monitoring and machine status prediction to maintain production quality. Machine status monitoring allows reducing of machine service costs as well as maintaining the high production quality.
Źródło:
Management Systems in Production Engineering; 2018, 3 (26); 168-171
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of variation in measurement chain on temperature measurement calibration with resistant temperature sensors
Autorzy:
Deutsch, Jessica
Riedel, Mirko
Müller, Jens
Ihlenfeldt, Steffen
Powiązania:
https://bibliotekanauki.pl/articles/99818.pdf
Data publikacji:
2019
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
temperature measurement
calibration
PRT sensor
Opis:
Temperature is one of the most important key parameter to consider in measurement and mechanical engineering, because every measurement has to be conducted with reference to standard temperature conditions (20°C, ISO 1). Strictly speaking, almost every measurement depends on the accuracy of the temperature measurement, which requires proper calibration. Therefore, standards list detailed criteria to fulfil temperature calibration with high precision. In fact, any calibration is only valid, if the whole measurement chain is taken into account. This would make recalibration necessary with each variation of the components in the measuring set-up (varying cable length, different measurement channel etc.), which is time-consuming or even impossible in practice. For that reason, this paper presents a practicable calibration strategy, which specifies each component individually and later combines the calibration results according to the composition of the measurement chain. This provides a fast and useful way to achieve the required accuracy of temperature measurement. The examined, exemplary measurement chain consists of an industrial platinum resistance thermometer (IPRT), cables with different lengths, an electrical amplifier and a reference temperature calibrator.
Źródło:
Journal of Machine Engineering; 2019, 19, 3; 56-65
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies