Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "space charge" wg kryterium: Temat


Wyświetlanie 1-12 z 12
Tytuł:
Space charge dominated beam transport in the K130 cyclotron injection line
Autorzy:
Heikkinen, P.
Powiązania:
https://bibliotekanauki.pl/articles/148727.pdf
Data publikacji:
2003
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
cyclotron
injection
space charge
Opis:
High intensity H- beams are injected into the K130 cyclotron [1] for isotope production and for proton induced fission studies. Earlier, when protons were accelerated as positive ions, the beam intensity was limited by beam losses in the extraction system from the cyclotron. Stripping extraction of negative ions removed this limitation. However, now space charge effects in the injection beam line limit the beam intensity. At present, the maximum practical H- beam intensity at the inflector is about 0.25 mA, which gives 40-50 žA of extracted proton beam. Calculations predict that the injection beam line from the ion source to the matching quadrupoles below the cyclotron can transfer about 1 mA of 6 keV H- beam, which also was measured. The quadrupole section has a smaller transmission. Also a significant portion of the beam is lost during the last 2 m in the axial hole. General rules for maximum beam intensity as a function of beam line parameters such as beam tube aperture, distance of focusing elements, beam charge, mass and energy are given for different kinds of focusing systems (solenoids, FODO and FOFDOD quadrupole structures). As a conclusion, some suggestions to improve the transmission of the injection line are given.
Źródło:
Nukleonika; 2003, 48,suppl.2; 21-24
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computer simulation of the space charge dominated beam dynamics for external injection into the JINR Phasotron
Autorzy:
Onischenko, L.
Samsonov, E.
Powiązania:
https://bibliotekanauki.pl/articles/148731.pdf
Data publikacji:
2003
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
phasotron
external injection
space charge
beam dynamics
Opis:
A project of increasing the beam intensity of the 660 MeV JINR proton Phasotron up to 50 žA by an external injection of the H- beam with energy of 5 MeV is now under design. Computer simulation of the space charge dominated beam dynamics in Phasotron is reported. As follows from the simulation, the capture efficiency does not change too much when the beam space charge is taken into account.
Źródło:
Nukleonika; 2003, 48,suppl.2; 29-34
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of new generation plasma optical devices
Autorzy:
Litovko, I. V.
Goncharov, A. A.
Dobrovolskiy, A. N.
Naiko, L. V.
Naiko, I. V.
Powiązania:
https://bibliotekanauki.pl/articles/971496.pdf
Data publikacji:
2016
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
anode layer
plasma lens
plasma accelerator
plasma jet
space charge
Opis:
The paper presents new generation plasma optical devices based on the electrostatic plasma lens configuration that opens a novel attractive possibility for effective high-tech practical applications. Original approaches to use of plasma accelerators with closed electron drift and open walls for the creation of a cost-effective low-maintenance plasma lens with positive space charge and possible application for low-cost, low-energy rocket engine are described. The preliminary experimental, theoretical and simulation results are presented. It is noted that the presented plasma devices are attractive for many different applications in the state-of-the-art vacuum-plasma processing.
Źródło:
Nukleonika; 2016, 61, 2; 207-212
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Photo-enhanced conduction in inhomogeneous thin film space charge limited conducting systems
Fotowzmocnione przewodnictwo w niejednorodnych układach cienkowarstwowych zdominowanych przez prądy ograniczone ładunkiem przestrzennym
Autorzy:
Bąk, G. W.
Powiązania:
https://bibliotekanauki.pl/articles/296597.pdf
Data publikacji:
2016
Wydawca:
Politechnika Łódzka. Wydawnictwo Politechniki Łódzkiej
Tematy:
space charge limited currents
optical switching
prądy ograniczone ładunkiem przestrzennym
komutacja optyczna
Opis:
Photo-enhancement of space-charge limited currents in deliberately modified thin-film structures is studied using numerical methods. The obtained results suggest that it should be possible to obtain optically induced increase in current density of the order of 107 in modified thin film structures as a result of deliberate modification of trap density at the emitter consisting in formation of high density of traps at the emitter.
Badane są metodami numerycznymi prądy ograniczone ładunkiem przestrzennym w świadomie modyfikowanych strukturach cienkowarstwowych. Otrzymane wyniki sugerują, że powinno być możliwe uzyskanie optycznie indukowanego wzrostu gęstości prądu rzędu 107 w układach z modyfikacją koncentracji pułapek przy emiterze, polegającą na wytworzeniu cienkiej warstwy o dużej koncentracji pułapek.
Źródło:
Scientific Bulletin. Physics / Technical University of Łódź; 2016, 37; 11-20
1505-1013
2449-982X
Pojawia się w:
Scientific Bulletin. Physics / Technical University of Łódź
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Local space charge effect in conventional avalanche counters at moderate specific ionization
Autorzy:
Sernicki, J.
Powiązania:
https://bibliotekanauki.pl/articles/146145.pdf
Data publikacji:
2000
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
avalanche counter
gas amplification
n-heptane vapour
pulse amplitude characteristic
space charge
Opis:
The purpose of this investigation is the determination of a simple criterion of local space charge effect in conventional avalanche counters at moderate specific ionization. Parallel-plate avalanche counters (PPAC) with an electrode spacing d from 0.1 to 0.4 cm have been used to register low-energy alpha particles at n-heptane vapour pressures of p ? 5 Torr. The criterion determined is a simple h/pm function describing the variability of the product of effective gas amplification and actual particle energy loss, where both the numerical h coefficient and the exponent m assume different values for the various values of d. The product variability at higher gas pressures in PPAC detector – having regard to practical side of criterion determined – can be relatively well described by a single linear function. The results obtained are discussed from their veracity point of view.
Źródło:
Nukleonika; 2000, 45, 2; 125-131
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Space-charge-limited currents as an indicator of non-uniform charge traps distribution in thin film dielectrics: numerical solutions
Prądy ograniczone ładunkiem przestrzennym jako wskaźnik przestrzennie niejednorodnego rozkładu pułapek w cienkich warstwach dielektryków: rozwiązania numeryczne
Autorzy:
Bąk, G. W.
Powiązania:
https://bibliotekanauki.pl/articles/296534.pdf
Data publikacji:
2012
Wydawca:
Politechnika Łódzka. Wydawnictwo Politechniki Łódzkiej
Tematy:
prądy ograniczone ładunkiem przestrzennym
warstwy cienkie
pułapka ładunkowa
space charge limited currents
thin films
charge traps
Opis:
Space charge limited currents in inhomogeneous thin film insulating systems are studied by means of numerical methods. Calculations for two spatial distribution of traps are presented. The results confirm that the influence of charge traps at the emitter is much stronger than those at the collector. The case of illumination of the emitter is also analyzed. It turns out that it is possible to find the valued of parameter describing the exponential decay of trap distribution at the emitter and the surface trap concentration for the case of illuminated sample. The paper summarizes the data concerning possibility of determination of trap distribution at the emitter in thin film insulators using photo-enhanced space-charge-limited current measurements.
Przedmiotem pracy jest numeryczna analiza prądów ograniczonych ładunkiem przestrzennym w niejednorodnych układach cienkowarstwowych. Przedstawiono wyniki obliczeń dla dwu przestrzennych rozkładów pułapek. Potwierdzono, że wpływ pułapek przy emiterze jest znacznie większy niż tych przy kolektorze. Pokazano, że stosując fotowzmocnione prądy ograniczone ładunkiem przestrzennym, można niezależnie wyznaczyć wartości stałej zaniku koncentracji pułapek i ich powierzchniowej koncentracji. Praca podsumowuje wyniki dotyczące możliwości wyznaczenia parametrów niejednorodnego rozkładu pułapek w układach cienkowarstwowych.
Źródło:
Scientific Bulletin. Physics / Technical University of Łódź; 2012, 33; 19-29
1505-1013
2449-982X
Pojawia się w:
Scientific Bulletin. Physics / Technical University of Łódź
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Monte Carlo simulation of dispersive carrier transport in disordered solids in the presence of space charge effects
Autorzy:
Tomaszewicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/1954064.pdf
Data publikacji:
1998
Wydawca:
Politechnika Gdańska
Tematy:
Monte Carlo simulations
Monte Carlo methods
dispersive carrier transport
disordered solids
space charge effects
multiple-trapping carrier transport
MT transport equations
Opis:
A Monte Carlo (MC) method of simulation of the multiple-trapping (MT) carrier transport in disordered solids, taking into account the space charge effects, is presented. The main idea is to utilize the ordered binary bees for the storage of sequences of the carrier positions and release times. An exemplary implementation of the MC method in the case of isothermal surface-potential decay is described. Also, modifications of the algorithm for other experimental configurations are indicated. The preliminary simulation results are compared with the approximate solutions of MT transport equations.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 1998, 2, 1; 19-29
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement of sprinkled and encapsulated space charge in homo-multilayer dielectric samples using PEA method
Autorzy:
Florkowski, Marek
Kuniewski, Maciej
Powiązania:
https://bibliotekanauki.pl/articles/2173639.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
space charge
corona discharge
encapsulated charge
PEA
pulsed electroacoustic method
high voltage insulation
diagnostics
ładunek kosmiczny
wyładowanie koronowe
impulsowa metoda elektroakustyczna
izolacja wysokiego napięcia
diagnostyka
ładunek zamknięty
Opis:
High voltage DC insulation plays an important role, especially in power transmission systems (HVDC) but also increasingly on medium voltage levels (MVDC). The space charge behavior under DC voltage has great importance on electrical insulation reliability. This paper reports investigations of encapsulated space charge in homo-multilayer dielectric materials using the pulsed electro-acoustic (PEA) method. The charge has been introduced on the homo-layer interface by corona sprinkling prior to encapsulation. Two doses of charge density were accumulated on the dielectric surface in two types of dielectric materials Kapton and LDPE. The polarization DC voltage was applied in 2 min intervals in steps corresponding to an effective electric field strength in a range of 8–40 kV/mm for Kapton and 10–50 kV/mm for LDPE. The PEA-based detected space charge was compared at the initial, reference stage, prior to charge accumulation, and after corona sprinkling of defined charge density. The evaluation was based on the PEA time-dependent charge distributions and charge profiles referring to the DC polarization field strength. The goal of the experiment was to identify the relationship and the character of the known sprinkled and encapsulated charge inside homo-layered materials using the PEA method. According to the observations, the ratio between sprinkled charge densities is proportional to the encapsulated, charge densities measured by the PEA method on the interfacial homo-layer for the Kapton specimen. In the case of LDPE, a fast decrease of interfacial charge was observed, especially at a higher polarization field above 10 kV/mm. The encapsulation of the known charge amount can be extended to different types of multilayer material. The presented methodology might be used also for extended calibration of the PEA measurement system.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2022, 70, 2; art. no. e140686
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of space charge region width and diffusion length in Cu(In,Ga)(S,Se)2 absorber from solar cell spectral characteristics
Autorzy:
Tivanov, M.
Patryn, A.
Powiązania:
https://bibliotekanauki.pl/articles/118474.pdf
Data publikacji:
2014
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
CdS
CIGSS
space-charge region width
diffusion length
photocurrent spectra
photovoltage spectra
CD
szerokość obszaru ładunku przestrzennego
długość drogi dyfuzji
widma fotoprądu
widma ogniwa słonecznego
Opis:
In this work we present simple non-destructive method for extracting of Cu(In,Ga)(S,Se)2-based solar cell parameters (space-charge region width and diffusion length of minority charge carriers in Cu(In,Ga)(S,Se)2 absorber) from the analysis of solar cell spectral characteristics. This method is based on one-dimensional model of a solar cell when the change of in-depth distribution of the photogenerated carriers and, hence, the change of its photoresponse with the variation of excitation wave-length in solar cell is taking into account. The following assumptions are accepted: the reflection of charge carriers from back contact and the «drawing» fields in the quasi-neutral area of the absorber layers are negligible; window and buffer layers are transparent in the analyzed of spectrum range; the injection level of minority charge carriers is low; the recombination losses at the metallurgical p-n-junction interface of the studied photosensitive structure are dependent linearly on the photocurrent density.
W pracy przedstawiono prostą metodę nieniszczącego wyznaczenia parametrów (szerokość obszaru ładunku przestrzennego i długość drogi dyfuzji mniejszościowych nośników ładunku w absorberze) dla ogniw słonecznych na bazie Cu(In,Ga)(S, Se)2 z analizy charakterystyk widmowych ogniw słonecznych. Metoda opiera się na jednowymiarowym modelu ogniwa słonecznego, kiedy zmiana rozkładu generowanych optycznie nośników jest prostopadła do powierzchni i zmiana fotoodpowiedzi ze zmianą długości fali światła wzbudzającego jest brana pod uwagę. Przyjęto poniższe założenia: odbicie nośników ładunku od tylnego kontaktu oraz zmiana pola profilu w okolicy quasi-neutralne warstw absorbera są nieistotne; warstwy czołowa i buforowa są przezroczyste w analizowanym zakresie widmowym; poziom generacji mniejszościowych nośników ładunku jest niski; straty rekombinacyjne w bazowym n-p złączu badanej struktury są uzależnione światłoczułych liniowo od gęstości fotoprądu.
Źródło:
Zeszyty Naukowe Wydziału Elektroniki i Informatyki Politechniki Koszalińskiej; 2014, 6; 69-76
1897-7421
Pojawia się w:
Zeszyty Naukowe Wydziału Elektroniki i Informatyki Politechniki Koszalińskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of protrusions on the initiation of partial discharges in XLPE high voltage cables
Autorzy:
AlShaikh Saleh, Mohammad
Refaat, Shady S.
Olesz, Marek
Abu-Rub, Haitham
Guziński, Jarosław
Powiązania:
https://bibliotekanauki.pl/articles/2090691.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
FEA
finite elements analysis
protrusions
XLPE
water trees
partial discharge
void
space charge
stress enhancement factor
analiza elementów skończonych
kable XLPE
polietylen kablowy
polietylen sieciowany
wyładowanie niezupełne
ładunek przestrzenny
Opis:
This paper is focusing on 3D Finite Elements Analysis (FEA) based modelling of protrusions as defects or imperfections in the XLPE high voltage cable. This study is aiming to examine the impact protrusions have on the initiation of partial discharges. Spherical and ellipsoidal protrusions with different sizes at the conductor screen of the high voltage cable is an essential content of this paper. In addition, a spherical gas-filled void is placed inside and outside the protrusions, and a water tree produced from protrusions is under consideration. The partial discharge influence taking place at the protrusions and the stress enhancement factor is determined for all the variations mentioned to quantify the rise in the inception of partial discharges due to the protrusions.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 1; e136037, 1--9
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of protrusions on the initiation of partial discharges in XLPE high voltage cables
Autorzy:
AlShaikh Saleh, Mohammad
Refaat, Shady S.
Olesz, Marek
Abu-Rub, Haitham
Guziński, Jarosław
Powiązania:
https://bibliotekanauki.pl/articles/2173562.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
FEA
finite elements analysis
protrusions
XLPE
water trees
partial discharge
void
space charge
stress enhancement factor
analiza elementów skończonych
kable XLPE
polietylen kablowy
polietylen sieciowany
wyładowanie niezupełne
ładunek przestrzenny
Opis:
This paper is focusing on 3D Finite Elements Analysis (FEA) based modelling of protrusions as defects or imperfections in the XLPE high voltage cable. This study is aiming to examine the impact protrusions have on the initiation of partial discharges. Spherical and ellipsoidal protrusions with different sizes at the conductor screen of the high voltage cable is an essential content of this paper. In addition, a spherical gas-filled void is placed inside and outside the protrusions, and a water tree produced from protrusions is under consideration. The partial discharge influence taking place at the protrusions and the stress enhancement factor is determined for all the variations mentioned to quantify the rise in the inception of partial discharges due to the protrusions.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 1; art. no. e136037
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Elimination of the impact of RC constant on transient photocurrents measured in organic layers
Eliminacja wpływu stałej RC w pomiarach fotoprądów przejściowych warstw organicznych
Autorzy:
Kania, S.
Kuliński, J.
Powiązania:
https://bibliotekanauki.pl/articles/296553.pdf
Data publikacji:
2016
Wydawca:
Politechnika Łódzka. Wydawnictwo Politechniki Łódzkiej
Tematy:
organic electronics
circuit time constant
carrier mobility
drift transport
1,5-dihydroxynaphthalene
TOF measurements
electrical characterization
SCLC
space charge limited currents
elektronika organiczna
stała czasowa obwodu
ruchliwość nośników ładunku
transport dryftowy
1,5-dihydroksynaftalen
pomiary TOF
charakterystyka elektryczna
prądy ograniczone ładunkiem przestrzennym
Opis:
We present a calculation method for elimination of the effect of the RC constant of the measuring circuit in the time-of-flight (TOF) measurements where a pulse generation of the photocurrent in a thin layer of low-molecular organic material is exploited. Presented method allows to eliminate the influence of the component of displacement current related to dielectric losses and obtaining the actual conduction current time dependence. The method was tested on the thin layers of 1,5-dihydroxynaphthalene.
Zastosowanie metody eliminacji wpływu stałej RC obwodu pomiarowego do analizy wyników pomiaru fotoprądów przejściowych płynących w cienkiej warstwie niskocząsteczkowego materiału organicznego umożliwia eliminację wpływu składowej prądu przesunięcia związanej ze stratami dielektrycznymi i uzyskanie rzeczywistego przebiegu prądu przewodzenia w funkcji czasu. Pozwala to na wyznaczenie prawidłowej wartości czasu charakterystycznego nawet dla cieńszych warstw, dla których daje się zrealizować pomiar charakterystyki stałoprądowej U-I w zakresie prądów ograniczonych ładunkiem przestrzennym. Otwiera to możliwość pełnej charakteryzacji własności elektrycznych badanego materiału organicznego przy użyciu jednej komórki pomiarowej. Możliwość numerycznego przedstawienia przebiegu przejściowego fotoprądu powinna pozwolić na badanie własności materiału metodą TOF dla uzyskania rozkładu pułapek.
Źródło:
Scientific Bulletin. Physics / Technical University of Łódź; 2016, 37; 65-73
1505-1013
2449-982X
Pojawia się w:
Scientific Bulletin. Physics / Technical University of Łódź
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-12 z 12

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies