Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "fitting analysis" wg kryterium: Temat


Wyświetlanie 1-5 z 5
Tytuł:
Research on ship trajectory extraction based on multiattribute DBSCAN optimisation algorithm
Autorzy:
Xu, Xiaofeng
Cui, Deqaing
Li, Yun
Xiao, Yingjie
Powiązania:
https://bibliotekanauki.pl/articles/1551877.pdf
Data publikacji:
2021
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
clustering algorithm
abnormal route
DBSCAN
feature trajectory extraction
fitting analysis
Opis:
With the vigorous development of maritime traffic, the importance of maritime navigation safety is increasing day by day. Ship trajectory extraction and analysis play an important role in ensuring navigation safety. At present, the DBSCAN (density-based spatial clustering of applications with noise) algorithm is the most common method in the research of ship trajectory extraction, but it has shortcomings such as missing ship trajectories in the process of trajectory division. The improved multi-attribute DBSCAN algorithm avoids trajectory division and greatly reduces the probability of missing sub-trajectories. By introducing the position, speed and heading of the ship track point, dividing the complex water area and vectorising the ship track, the function of guaranteeing the track integrity can be achieved and the ship clustering effect can be better realised. The result shows that the cluster fitting effect reaches up to 99.83%, which proves that the multi-attribute DBSCAN algorithm and cluster analysis algorithm have higher reliability and provide better theoretical guidance for the analysis of ship abnormal behaviour.
Źródło:
Polish Maritime Research; 2021, 1; 136-148
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the effects of farm fitting out with the installation for horticultural crops irrigation
Analiza efektów wyposażenia gospodarstwa w instalację do nawadniania upraw ogrodniczych
Autorzy:
Gaworski, M.
Florczak, M.
Powiązania:
https://bibliotekanauki.pl/articles/56250.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
effect analysis
farm fitting
cost
installation
horticultural crop
horticultural production
irrigation
Opis:
Analysis of the effects of farm fi tting out with the installation for horticultural crops irrigation. The effects of fitting out the horticultural farm with irrigation installation are presented. The scope of work covered the labour inputs and exploitation costs. The total production profit analyzed in 2012, resulted from irrigation system implementation, amounted to about 30 000 PLN, when compared to the previous year without irrigation. The calculated predicted refunding of investment cost inputs will occur in the third year of irrigation system utilization; it is a significant argument that proves the rightness of fitting out the farm with overhauling hose-reel sprinkling machine and with auxiliary assisting devices.
Analiza efektów wyposażenia gospodarstwa w instalację do nawadniania upraw ogrodniczych. W pracy przedstawiono analizę efektów wyposażenia gospodarstwa ogrodniczego w instalację do nawadniania. Zakresem pracy objęto nakłady pracy i koszty eksploatacyjne. Rozpatrywany w 2012 r. zysk z całkowitej produkcji, wynikający z wdrożenia systemu nawadniania, kształtował się na poziomie ok. 30 000 zł w porównaniu do roku poprzedniego, bez deszczowania. Obliczono, że przewidywany zwrot kosztów poniesionych na inwestycję nastąpi już w trzecim roku użytkowania systemu nawadniania, co jest ważnym argumentem przemawiającym za słusznością zakupu deszczowni szpulowej oraz urządzeń wspomagających jej pracę.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Agriculture; 2013, 61 Agric.Forest Eng.
0208-5712
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Agriculture
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Semi-quantitative analysis study of the impact of microwave treatment on fly ash
Autorzy:
Ma, Xian Yun
Nie, Yi Miao
Guo, Jia Le
Chen, Yang
Chang, Zhen Jia
Wang, Ling
Liu, Shu Xian
Wang, Long
Powiązania:
https://bibliotekanauki.pl/articles/27323647.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
microwave
fly ash
semi-quantitative analysis
adsorption
XRD refinement
infrared fitting
NMR
Opis:
Pre-processing provides an effective way for fly ash's high value-added utilization. However, the shortcomings of pre-processing methods such as grinding and flotation are apparent with many disadvantages that make it more challenging to use efficiently. Microwave heating helps the SiO2-Al.2O3 bond break, not only can make the structural change of the material can also promote the chemical reaction process. In the article, XRD, SEM, FT-IR, ammonia nitrogen adsorption, and other methods were used to analyze the changes in the properties of fly ash before and after microwave pre-treatment, the change in adsorption performance of fly ash before and after microwave treatment was analyzed. The study found that under microwave conditions of 600 W and 15 min, the adsorption rate of ammonia nitrogen by fly ash reached a maximum of 29.67%. The intensity of mullite and amorphous diffraction peaks decreased after 20 min at 600 W. The Si-O-(Si, Al) and Si-O-(Si) bonds showed significant changes at 15 min and 20 min under 600 W conditions. Based on the results, the microwave conditions were selected at 600 W for different periods, and semi-quantitative analysis was carried out by XRD-Rietveld, infrared peak fitting, and nuclear magnetic resonance. The XRD-Rietveld analysis showed that the amorphous phase content reached 46.18% at 15 min. In the infrared peak fitting, the fitting area at 1300-900 cm-1 and 600-400 cm-1 peaks at 56.92% at 25 min and 17.5% at 15 min, respectively. The silicon-oxygen network's degree of connection and polymerization was reduced after 15 min of microwave treatment for the nuclear magnetic resonance analysis. By combining specific surface area measurements, it was discovered that the maximum specific surface area attained a value of 3.122 m2/g at 15 min.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 6; art. no. 174897
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Time-dependent reliability analysis of corroded RC beams based on the phase-type fitting method
Autorzy:
Li, Junxiang
Chen, Jianqiao
Zhang, Xinxin
Wu, Zijun
Powiązania:
https://bibliotekanauki.pl/articles/27320977.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
chloride penetration
uncertainties
time-dependent reliability analysis
PH fitting method
corroded reinforced concretebeams
Opis:
It remains an important challenge to quantitatively describe the corrosion of reinforced concrete (RC) structures under chloride penetration. When considering the uncertainties encountered throughout the life cycle of RC structures exposed to a corrosive environment and evaluating their safety and reliability, the complexity of the problem intensifies. To address these issues, this paper focuses on the time-dependent reliability analysis of corroded RC beams, utilizing the phase-type (PH) fitting method. Initially, a model for the time-dependent reliability of corroded RC beams is established, incorporating the time-dependent chloride diffusion coefficient. Subsequently, a novel PH fitting method is proposed. The effectiveness of this new method is demonstrated through numerical examples. Furthermore, the time-dependent reliability analysis of corroded RC beams is compared using both the PH fitting method and the Monte Carlo simulation. The results reveal that the proposed method can accurately and efficiently deal with time-dependent reliability problems.
Źródło:
Eksploatacja i Niezawodność; 2023, 25, 4; art. no. 172442
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mimicking speaker’s lip movement on a 3D head model using cosine function fitting
Autorzy:
Lüsi, I.
Anbarjafari, G.
Powiązania:
https://bibliotekanauki.pl/articles/199798.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
3D lip movement modelling
mathematical modelling
depth information analysis
cosine function fitting
human-computer interaction
modelowanie ruchu warg 3D
modelowanie matematyczne
funkcja cosinus
interakcja człowiek-komputer
Opis:
Real-time mimicking of human facial movement on a 3D head model is a challenge which has attracted attention of many researchers. In this research work we propose a new method for enhancing the capturing of the shape of lips. We present an automatic lip movement tracking method which employs a cosine function to interpolate between extracted lip features in order to make the detection more accurate. In order to test the proposed method, mimicking lip movements of a speaker on a 3D head model is studied. Microsoft Kinect II is used in order to capture videos and both RGB and depth information are used to locate the mouth of a speaker followed by fitting a cosine function in order to track the changes of the features extracted from the lips.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2017, 65, 5; 733-739
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-5 z 5

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies