Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

English (EN)·Polski (PL)·Yкраїнський (UK)
Przejdź do strony domowej biblioteki Centralna Biblioteka Wojskowa Link otwiera się w nowym oknie Logo biblioteki Prolib Integro - strona głównaCentralna Biblioteka Wojskowa

Wyszukujesz frazę "composite design" wg kryterium: Temat

  Lista filtrów
Wyrównaj
Wyświetlanie 1-15 z 39
Tytuł:
Central composite design application in oil agglomeration of talc
Autorzy:
Polowczyk, I.
Kozlecki, T.
Powiązania:
https://bibliotekanauki.pl/articles/109551.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
talc
oil agglomeration
optimization
central composite design
design of experiment
Opis:
Talc has many applications in various branches of industry. This material is an inert one with a naturally hydrophobic surface. Talc agglomeration is within the wide interest of pharmaceutical industry. Oil agglomeration experiments of talc were carried out to find out and assess the significance of experimental factors. Central composite design (CCD) was used to estimate the importance and interrelation of the agglomeration process parameters. Four experimental factors have been evaluated, i.e. concentration of cationic surfactant and oil, agitation intensity as well as time of the process. The median size of agglomerates (D50) and the polydispersity span (PDI) were used as the process responses. Logarithmic transformations of the responses provide better description of the model, than untransformed responses, with the reduced cubic model for D50 and quadratic model for PDI. This was supported by the Box-Cox plots. It was shown that there were many statistically important factors, including the concentration of cationic surfactant and stirring rate for D50, concentration of oil and stirring rate for PDI, as well as various interactions, up to third order for D50. Optimal conditions for minimum values of reagent amounts as well as mixing time and intensity for the maximum size of agglomerates but of rather narrow size distribution were found.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 1061-1078
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of Acetaminophen and Methylparaben Removal within Subsurface Batch Constructed Wetland Systems
Autorzy:
Mutar, Zahraa Hasan
Mohammed, Ahmed A.
Al-Baldawi, Israa Abdulwahab
Powiązania:
https://bibliotekanauki.pl/articles/2025734.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
phytoremediation
ornamental plant
constructed wetland
PPCPs
central composite design
Opis:
The response surface methodology accompanied by Central Composite Design (CCD) was employed in this study to optimize the Alternanthera spp-based phytoremediation process for the individual removal of acetaminophen and methylparaben. Two operational variables, including concentration (A) (20, 60,100 mg/L) and sampling time (B) (7, 14, 21, and 35 days) were involved in the study for removal efficiency (Y) as response. CCD had required a total of 18 experiments for each compound. Analysis of variance (ANOVA) was conducted to verify the adequacy of the proposed mathematical models and revealed good agreement with the experimental data. The observed R2 values (0.9732 and 0.9870), adjusted R2 (0.9620 and 0.9816) and predicted R2 (0.9383 and 0.9721) for AC and MP, respectively, indicated that the developed models were significant at the 95% probability level. Concentration factor was found to be insignificant in the mathematical models; in contrast, sampling time was found to be of a crucial role. The removal of AC and MP were 89.23% and 64.48% under optimum conditions of A = 100 mg/L and B = 35 days respectively. The validation test confirmed the predicted results obtained by Central Composite Design, as the removals achieved under optimum conditions were 91.04% and 59.17% for AC and MP, respectively, which were in good agreement with the results proposed by the theoretical design.
Źródło:
Journal of Ecological Engineering; 2022, 23, 1; 228-239
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the central composite design to optimization of petroleum hydrocarbons removal from oilfield water using advanced oxidation process
Autorzy:
Farzadkia, M.
Ghorbanian, M.
Biglari, H.
Gholami, M.
Mehrizi, E. A.
Powiązania:
https://bibliotekanauki.pl/articles/204881.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
advanced oxidation processes
optimizing
total oil hydrocarbons
central composite design
Opis:
In the last few years, RSM method has been used widely to analyze, optimize and evaluate the interaction of independent factors for chemical, biochemical, and environmental processes. This study examined and evaluated the applicability of this method to manage Oilfield Produced Water to prevent marine environment due to the presence of hard degradable compounds by ozonation process. In this study simulated oil-water sample and a homogenizer reactor was used. The main reactor used in this study was impeinger equipped with sintered glass filter through which the treated oil-water was entered to reactor in the form of discontinuous flow. After ozonation and at the end of the reaction time (60 min), the concentration of oil hydrocarbons was determined by a gas chromatography device equipped with a flame ionization detector. The performance of the central composite design (CCD) approach was evaluated by the F-Value, P-Value, R2, lack of fit test and Adequate Precision parameters to determine the influence of effective factors, including ozonation time, pH, ozone dose, and TPH concentration on the TPH removal efficiency. The mean TPH efficiency obtained from the design of the 30-step experiment resulting from surface-response method was 49.903%, with a standard deviation of 12.47. This study showed the high power of model adopted from the central composite design to predict the hydrocarbons removal from oilfield water using advanced oxidation process, and it was proved that this model can be used alone to determine the design space nature.
Źródło:
Archives of Environmental Protection; 2018, 44, 4; 22-30
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Strength Analysis of Cu/α−Al2O3 Interfaces as a Key for Rational Composite Design
Analiza wytrzymałości interfaz Cu/α−Al2O3 jako klucz do racjonalnego projektowania kompozytów
Autorzy:
Nalepka, K.
Sztwiertnia, K.
Nalepka, P.
Pęcherski, R. B.
Powiązania:
https://bibliotekanauki.pl/articles/355920.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
analisis
strength interfaces
composite design
analiza
wytrzymałość interfaz
projektowanie kompozytów
Opis:
Electron back-scattered diffraction (EBSD) studies carried out for the Cu/α−Al2O3 composites manufactured by pulsed laser deposition method and by the powder metallurgy enable to uncover a set of orientation relationships characteristic for materials of this type. The identified interfaces are categorized according to the bonding strength. Additionally, their microstructure is reproduced by molecular dynamic (MD) simulations. The obtained classification of the phase boundaries constitutes key information for effective composite design.
Badania EBSD (Electron Back-Scattered Diffraction) przeprowadzone dla kompozytów Cu/α−Al2O3 wytworzonych metodą ablacji laserowej (Pulsed Laser Deposition) oraz metalurgii proszków umożliwiły odkrycie zbioru związków orientacji charakterystycznych dla tego typu materiałów. Zidentyfikowane warstwy przejściowe skategoryzowano zgodnie z wytrzymałością wiązania. Dodatkowo, ich mikrostrukturę odtworzono za pomocą symulacji dynamiki molekularnej (MD). Otrzymana klasyfikacja granic fazowych stanowi kluczową informację do efektywnego projektowania kompozytów.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 3A; 1953-1956
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Batch and Continuous Photo-Fenton Oxidation of Reactive-Red Dye from Wastewater
Autorzy:
Hassan, Ali A.
AlJaberi, Forat Yasir
Al-Khateeb, Raid T.
Powiązania:
https://bibliotekanauki.pl/articles/2025725.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
dye
wastewater treatment
advanced oxidation process
central composite design
optimization
Opis:
This paper aims to investigate the ability of photo-Fenton technology to remove Reactive Red dye (RR-dye) from wastewater using batch and continuous operating modes. The batch mode of photo-Fenton removal of organic content was conducted under the influence of solution pH (3–10), hydrogen peroxide (25–100 ppm), irradiation time (20–90 min), ferrous sulphate (5–20 ppm), and temperature (25–60 °C). For comparison, the continuous treatment was conducted under the influence of the flow rate of the contaminated solution (10, 20, 30, 40, and 50 mL/min). The results revealed that the treatability of the batch mode was more effective compared to the continuous mode. In the batch process, the organic contaminant was completely removed compared to that of 82% obtained when the continuous system was performed. The optimization process showed that the optimal values of the operating variables in the case of the batch removal of RR-dye were 3, 78 ppm, 90 min, 20 ppm, and 60 °C for pH, hydrogen peroxide, irradiation time, ferrous sulphate, and temperature, respectively. Moreover, the reversion F-value was 21.69, the probability P value was less than 0.001, and the correlation coefficient was (R2 = 0.9455), which illustrative the significance of the model obtained for the batch process.
Źródło:
Journal of Ecological Engineering; 2022, 23, 1; 14-23
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parametric optimization of coal desulfurization through Alkaline leaching
Autorzy:
Rehman, F.
Ahmad, S. W.
Zafar, M. S.
Ahmad, S.
Zia-Ul-Haq, M.
Powiązania:
https://bibliotekanauki.pl/articles/779964.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Desulfurization
Alkaline leaching
Response surface methodology
ANOVA
Central Composite design
Opis:
Desulfurization of Pakistani coal has been carried out through alkaline leaching. During present experimental investigation, the effect of operating parameters like alkali concentration, time, temperature and particle size has also been analyzed, graphically represented and critically discussed. Parametric optimization of leaching process has been carried out by using response surface methodology (RSM) based on central composite design (CCD). The analysis of variance (ANOVA) was performed in order to assess the highest level interactions of variables and three way interactions were observed significant. Further, the optimum value of total sulfur removal was observed as 53% when the operatic conditions fixed at 10% W/V, 60 min, 80°C and 140 mesh for alkaline concentration, leaching time, temperature and particle size, respectively.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 3; 103-109
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of Injection Moulding Process via Design of Experiment (DOE) Method based on Rice Husk (RH) Reinforced Low Density Polyethylene (LDPE) Composite Properties
Autorzy:
Jaya, Haliza
Zulkepli, Nik Noriman
Omar, Mohd Firdaus
Abd Rahim, Shayfull Zamree
Nabiałek, Marcin
Jeż, Kinga
Al Bakri Abdullah, Mohd Mustafa
Powiązania:
https://bibliotekanauki.pl/articles/2106601.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
injection moulding
design of experiments
DOE
central composite design
response surface methodology
RSM
shrinkage
tensile strength
Opis:
Optimal parameters setting of injection moulding (IM) machine critically effects productivity, quality, and cost production of end products in manufacturing industries. Previously, trial and error method were the most common method for the production engineers to meet the optimal process injection moulding parameter setting. Inappropriate injection moulding machine parameter settings can lead to poor production and quality of a product. Therefore, this study was purposefully carried out to overcome those uncertainty. This paper presents a statistical technique on the optimization of injection moulding process parameters through central composite design (CCD). In this study, an understanding of the injection moulding process and consequently its optimization is carried out by CCD based on three parameters (melt temperature, packing pressure, and cooling time) which influence the shrinkage and tensile strength of rice husk (RH) reinforced low density polyethylene (LDPE) composites. Statistical results and analysis are used to provide better interpretation of the experiment. The models are form from analysis of variance (ANOVA) method and the model passed the tests for normality and independence assumptions.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 2; 719--727
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parametric optimization of rice bran oil extraction using response surface methodology
Autorzy:
Ahmad, S. W.
Javed, F.
Ahmad, S.
Akram, M.
Rehman, A.
Powiązania:
https://bibliotekanauki.pl/articles/778979.pdf
Data publikacji:
2016
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
solvent extraction
rice bran oil
response surface methodology (RSM)
central composite design (CCD)
Opis:
Use of bran oil in various edible and nonedible industries is very common. In this research work, efficient and optimized methodology for the recovery of rice bran oil has been investigated. The present statistical study includes parametric optimization, based on experimental results of rice bran oil extraction. In this study, three solvents, acetone, ethanol and solvent mixture (SM) [acetone: ethanol (1:1 v/v)] were employed in extraction investigations. Response surface methodology (RSM), an optimization technique, was exploited for this purpose. A five level central composite design (CCD) consisting four operating parameter, like temperature, stirring rate, solvent-bran ratio and contact time were examined to optimize rice bran oil extraction. Experimental results showed that oil recovery can be enhanced from 71% to 82% when temperature, solvent-bran ratio, stirring rate and contact time were kept at 55°C, 6:1, 180 rpm and 45 minutes, respectively while fixing the pH of the mixture at 7.1.
Źródło:
Polish Journal of Chemical Technology; 2016, 18, 3; 103-109
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of Factors Influencing Dry Sliding Wear Behaviour of Laser Remelted Plasma Sprayed Mo Coating Using Response Surface Methodology
Autorzy:
Manjunatha, S. S.
Manjaiah, M.
Basavarajappa, S.
Powiązania:
https://bibliotekanauki.pl/articles/356714.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
laser remelting
plasma spray
central composite design (CCD)
response surface methodology (RSM)
Mo coating
Opis:
Plasma spraying is a process widely used to fabricate wear resistant coatings. However, various problems are associated with plasma spraying out of which poor bonding strength between the coating and the substrate and the high porosity in the as sprayed coatings are of major concern. In order to eliminate these problems and enhance wear performance, the laser remelting process has been used. The laser remelting of plasma sprayed Mo coatings alters the wear mechanism and improves the wear resistance. The wear mechanism and wear volume loss depend on the applied load, sliding speed and sliding distance. Hence, an effort has been made to investigate the effect of process parameters on volume loss using Response Surface Methodology (RSM) based mathematical models. The experiments were planned as per Central Composite Design (CCD). The investigations revealed that the applied load was the most dominant factor affecting the volume loss of the coating. The sliding speed, sliding distance and interaction effects were considered as the next important parameters influencing the volume loss. The investigation also reveals that, the wear volume loss depends on two wear mechanisms, one being the formations of grooves along surface tribo films and other being fracture of splats with delamination of the coating.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 217-225
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorption of lead ions onto chemically activated carbon from waste tire char and optimization of the process using response surface methodology
Autorzy:
Rutto, Hilary
Seidigeng, Tumisang
Malise, Lucky
Powiązania:
https://bibliotekanauki.pl/articles/204781.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
waste tire pyrolysis char
chemical activation
central composite design
CCD
adsorption capacity
numerical optimization
Opis:
Tires play an important role in the automobile industry. However, their disposal when worn out has adverse effects on the environment. The main aim of this study was to prepare activated carbon from waste tire pyrolysis char by impregnating KOH onto pyrolytic char. Adsorption studies on lead onto chemically activated carbon were carried out using response surface methodology. The effect of process parameters such as temperature (°C), adsorbent dosage (g/100 ml), pH, contact time (minutes) and initial lead concentration (mg/l) on the adsorption capacity were investigated. It was found out that the adsorption capacity increased with an increase in adsorbent dosage, contact time, pH, and decreased with an increase in lead concentration and temperature. Optimization of the process variables was done using a numerical optimization method. Fourier Transform Infrared Spectra (FTIR) analysis, X-ray Diffraction (XRD), Thermogravimetric analysis (TGA) and scanning electron microscope were used to characterize the pyrolytic carbon char before and after activation. The numerical optimization analysis results showed that the maximum adsorption capacity of 93.176 mg/g was obtained at adsorbent dosage of 0.97 g/100 ml, pH 7, contact time of 115.27 min, initial metal concentration of 100 mg/and temperature of 25°C. FTIR and TGA analysis showed the presence of oxygen containing functional groups on the surface of the activated carbon produced and that the weight loss during the activation step was negligible.
Źródło:
Archives of Environmental Protection; 2019, 45, 4; 92-103
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization and optimization of spectrophotometric colour removal from dye containing wastewater by Coagulation-Flocculation
Autorzy:
Obiora-Okafo, I. A.
Onukwuli, O. D.
Powiązania:
https://bibliotekanauki.pl/articles/779809.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
coagulation-flocculation
natural organic polymer
fibre-metric analysis
spectrophotometer
face-centred central composite design
Opis:
The performance of Vigna unguiculata coagulant (VUC) for colour removal from acid dye was investigated in this study. The proximate, structure and morphology of the coagulant were investigated using standard official methods, Fourier-Transform Infrared (FTIR) spectrometer and scanning electron microscopy (SEM), respectively. Response surface methodology (RSM) using face-centred central composite design (FCCD) optimized four process variables including pH, coagulant dosage, dye concentration and time. The colour removal efficiency obtained from the optimization analysis was 99.26% at process conditions of pH 2, coagulant dosage 256.09 mg/l, dye concentration 16.7 mg/l and time 540 min. The verification experiments agreed with the predicted values having a standard error value of 1.96%. Overlay contour plot established optimum areas where the predicted response variable is in an acceptable range (≥ 70%) with respect to optimum conditions. The FCCD approach was appropriate for optimizing the process giving higher removal efficiency when compared to the main effect plots.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 4; 49-59
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on the Pore and Fibre metric Characteristics of Natural Organic Polymer for Colour Degradation in Wastewater: Face-Centred Central Composite Design
Autorzy:
Obiora-Okafo, Ifeoma Amaoge
Onukwuli, Okechukwu Dominic
Powiązania:
https://bibliotekanauki.pl/articles/1193490.pdf
Data publikacji:
2021
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Biebrich scarlet
Coagulation-flocculation
Face-centred central composite design
Natural organic polymer
Overlaid contour plot
Vigna subterranean
Opis:
The use of natural organic polymer (NOP) coagulants in the removal of pollutants from industrial wastewater has been the subject of continuous research. The importance of applying Vigna subterranean coagulant (VSC) for colour removal from crystal Ponceau 6R dye was investigated in this study. The precursor's proximate analysis, structure, surface morphology, fibre metric, and pore size distribution were examined. The pH, coagulant dosage, dye concentration, and time were optimized using response surface methodology (RSM) and face-centred central composite design (FCCD). For the coagulant precursor, the proximate analysis gave high protein content of 18.15 %, the Fourier Infra-Red (FTIR) analysis confirmed the existence of O-H, N-H, and C=H, the SEM image revealed polymer rough surfaces, the most occurring pore size of 0.41 μm2, different fibre length between 2.11 μm -17.94 μm, and a compact net structure. As can be seen in the main effects plots, pH has the greatest impact on colour removal, followed by time. Coagulant dosages and dye concentration have less influence on the process. The colour removal efficiency obtained from the optimization analysis was 99.60% at process conditions of pH 2.11, coagulant dosage 293.32 mg/L, dye concentration 13.75 mg/L and time 533.3 min. The projected values were confirmed in the verification experiments, with a standard error of 2.10 %. Overlay contour plot established optimum areas where the predicted response variable is in an acceptable range (≥ 80%) with respect to optimum conditions. When compared to the main effect plots, the FCCD approach proves more appropriate for improving the process and yielding higher removal efficiency. As a result, protein extract from Vigna subterranean seed has the potential to be used as an effective coagulant for colour removals from industrial wastewaters.
Źródło:
World Scientific News; 2021, 159; 20-44
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Roughness Reduction in A Fused Filament Fabrication (FFF) Process using Central Composite Design Method
Autorzy:
Kandananond, Karin
Powiązania:
https://bibliotekanauki.pl/articles/23966673.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
średnia chropowatość powierzchni
centralna konstrukcja kompozytowa
metoda przyrostowa FFF
average surface roughness
central composite design
fused filament fabrication
Opis:
The objective of this study is to optimize the fabrication factors of a consumer-grade fused filament fabrication (FFF) system. The input factors were nozzle temperature, bed temperature, printing speed, and layer thickness. The optimization aims to minimize average surface roughness (Ra) indicating the surface quality of benchmarks. In this study, Ra was measured at two positions, the bottom and top surface of benchmarks. For the fabrication, the material used was the Polylactic acid (PLA) filament. A response surface method (RSM), central composite design (CCD), was utilized to carry out the optimization. The analysis of variance (ANOVA) was calculated to explore the significant factors, interactions, quadratic effect, and lack of fit, while the regression analysis was performed to determine the prediction equation of Ra. The model adequacy checking was conducted to check whether the residual assumption still held. The total number of thirty benchmarks was fabricated and measured using a surface roughness tester. For the bottom surface, the analysis results indicated that there was the main effect from only one factor, printing speed. However, for the top surface, the ANOVA signified an interaction between the printing speed and layer thickness. The optimal setting of these factors was also recommended, while the empirical models of Ra at both surface positions were also presented. Finally, an extra benchmark was fabricated to validate the empirical model.
Źródło:
Production Engineering Archives; 2022, 28, 2; 157--163
2353-5156
2353-7779
Pojawia się w:
Production Engineering Archives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Production of Spindle Palm Petiole Fiber Reinforced High Density Polyethyele Composites
Autorzy:
Nneka, Ejikeugwu L.
Monday, Omotioma
Nnaemeka, Omeje B.
Uzoma, Eke R.
Powiązania:
https://bibliotekanauki.pl/articles/1839868.pdf
Data publikacji:
2021
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Spindle palm petiole fiber
Sodium hydroxide
cellulose
chemical composition
Central Composite Design
Response Surface Methodology
tensile strength
polyethylene
Opis:
The work is on the production of spindle palm petiole fiber reinforced high density polyethylene (HDPE) composites. The Spindle Palm Petiole Fiber (SPPF) and HDPE composites were produced using injection molding machine. SPPF were characterized to determine their chemical compositions. Central Composite Design (CCD) was applied as an optimization tool of RSM for cellulose and tensile strength. The chemical composition of the SPPF is cellulose (65%), hemicelluloses (17.1%) and lignin (14.1%). Surface modifications of the fiber enhanced the properties of the fiber. Quadratic model adequately described the relationship between percentage cellulose yield and variables: chemical concentration, mass/volume ratio and time. The cellulose content at optimal level is 60.3% at 3.5wt% concentration, 4g/l mass/volume ratio and time of 16hr. Also for the composite, the quadratic model described the relationship between tensile strength and temperature, fiber/polymer ratio and time. The optimum tensile strength of 42.0 Mpa was obtained at fiber/polymer ratio of 29wt%, temperature of 172 °C and time of 10 min. Water absorbed by the untreated fiber was high compared to the chemically treated fiber. The chemical treatment created a better interfacial bonding of SPPF/HDPE and this could be responsible for the observations.
Źródło:
World News of Natural Sciences; 2021, 38; 98-119
2543-5426
Pojawia się w:
World News of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design and mechanical analysis of a composite T-type connection structure for marine structures
Autorzy:
Li, Xiaowen
Zhu, Zhaoyi
Li, Yan
Hu, Zhe
Powiązania:
https://bibliotekanauki.pl/articles/260625.pdf
Data publikacji:
2020
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
T-type connection structure
composite structure design
test
mechanical analysis
marine structure
Opis:
A new T-type connection structure consisting of composite sandwich plates, reinforced cores and adhesive was proposed for the construction of lightweight ships to resolve connection problems between bulkheads and decks of composite lightweight ship superstructures. Based on the design principles and mechanical properties of composite structures, the mechanical behaviour of the structure under a dangerous loading condition was investigated. In addition, the ultimate bearing capacities and damage modes were examined, the results of which demonstrated that the strength of the structure is weak, and that the adhesive and reinforced core between the face plate and the web plate is the primary weakness of the structure. A numerical simulation method was verified using the results of the mechanical tests, and five characteristic paths at the connection area were established. The stresses and displacements along the five paths were calculated using the numerical method. Then, variations in the geometric parameter and the strength and weight of the connection were summarised. The optimal angle of the adhesive bonding area is approximately 60°, which supports the optimal design and practical application of the lightweight ship adhesive-bonded connection structure.
Źródło:
Polish Maritime Research; 2020, 2; 145-157
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Wyświetlanie 1-15 z 39

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies