Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Su, M." wg kryterium: Autor


Wyświetlanie 1-8 z 8
Tytuł:
Modified pid control design for roll fin actuator of nonlinear modelling of the fishing boat
Autorzy:
Alarçin, F.
Demirel, H.
Su, M. E.
Yurtseven, A.
Powiązania:
https://bibliotekanauki.pl/articles/258902.pdf
Data publikacji:
2014
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
stability analyses
nonlinear roll motion
modified PID
CFD
Opis:
This study aims to reduce roll motion of a fishing boat which arises from disturbing hydrodynamic effects by means of fin roll stabilizer. It is assured that roll motion with nonlinear damping and restoring moment coefficients are down to the desired level through classical PID and modified PID algorithms. At the time of sailing, stability, a very important concept, was examined using Lyapunov direct method taking initial conditions into consideration, and it was noted that the system was generally stable. In addition, NACA 0015 model was used for the fin roll stabilizer, and flow analysis was carried out with Computational Fluid Dynamics (CFD) method. In the simulation results, when the same gains were used, modified PID controller algorithms were relatively more effective compared to PID in the fin roll stabilizer system.
Źródło:
Polish Maritime Research; 2014, 1; 3-8
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Friction and Wear Behavior of 201HT Cast Aluminum Alloy with Various Competitive Material
Autorzy:
Li, R.
Chen, L. J.
Su, M.
Zeng, Q.
Li, H.
Liu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/382627.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
casting
aluminum alloy
friction and wear
competitive material
odlewanie
stop aluminium
tarcie i zużycie
materiał konkurencyjny
Opis:
The friction and wear properties of 201HT aluminum alloys and the corresponding competitive coupons were tested on an electro-hydraulic servo face friction and wear testing machine (MM-U10G). The microstructures of the competitive coupons were investigated by scanning electron microscopy (SEM) and consequently the corresponding friction and wear mechanisms were studied. The results demonstrated that: (1) the best competitive material of friction and wear performance of the 201HT was the 201HTC. (2) the 201HTC modified by carbon following the initial mill for oil storage of the micro-groove to be produced, increased the corresponding lubrication performance reduced the friction coefficient and wear rate effectively. (3) the 201HT-201HTC could obtain both better friction and wear mainly due to the initial process of grinding following the 201HT plastic deformation occurred in the surface and the formation of a series of re-melting welding points, whereas the 201HT material hardness would be similar to the 201HTC material hardness, which led into the competitive material friction and wear performance improvement.
Źródło:
Archives of Foundry Engineering; 2017, 17, 2; 55-62
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Changes in the polarization states of random electromagnetic vortex beams propagating in biological tissues
Autorzy:
Duan, M.
Wu, Y.
Su, N.
Powiązania:
https://bibliotekanauki.pl/articles/174047.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
random electromagnetic vortex beam
biological tissue
state of polarization
Opis:
The changes in the on-axis polarization state of random electromagnetic Gaussian Schell-model vortex beams propagating in biological tissues have been studied. In different media propagation, the bigger Cn2 is, the earlier the appearance of the inflexion points in the on-axis degree of the polarization P(0, 0, z) is. As the propagation distance increases, the values of the on-axis orientation angle θ(0, 0, z) undergo several processes: at the beginning they are positive, then gradually increase to the maximum, jump to a negative value, finally tend to a fixed value. The bigger Cn2 corresponds to previous jumping position. In the entire propagation, the values of the on-axis ellipticity ε(0, 0, z) are larger than the initial one. There exists a phenomenon that the values of P(0, 0, z), θ(0, 0, z) and ε(0, 0, z) keep their extremes in a length of propagation distances for the far infrared beams. The maximum of P(0, 0, z) is the smallest and the jumping range of θ(0, 0, z) is the largest for the ultraviolet beams. Compared with σyy > σxx, the changes in magnitudes in P(0, 0, z) are more obvious when σyy < σxx, the changes in θ(0, 0, z) are just the reverse for σyy < σxx.
Źródło:
Optica Applicata; 2018, 48, 2; 297-309
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative growth kinetic study of Newcastle disease virus, infectious bursal disease virus and avian influenza virus in chicken embryo fibroblast and DF-1 cell lines
Autorzy:
Anam, S.
Rahman, S.U.
Ali, S.
Saeed, M.
Goyal, S.M.
Powiązania:
https://bibliotekanauki.pl/articles/2087170.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cytopathic effect
titer
growth kinetic
vaccine production
Źródło:
Polish Journal of Veterinary Sciences; 2021, 24, 2; 287-292
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Response patterns of phytoplankton growth to variations in resuspension in the German Bight revealed by daily MERIS data in 2003 and 2004
Autorzy:
Su, J.
Tian, T.
Krasemann, H.
Schartau, M.
Wirtz, K.
Powiązania:
https://bibliotekanauki.pl/articles/48702.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
chlorophyll a
phytoplankton production
spatial pattern
coastal sea water
German Bight
North Sea
MERIS data
photosynthesis
Źródło:
Oceanologia; 2015, 57, 4
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of synthesis conditions on the synthesis of carbon nanofibers by ethanol catalytic combustion
Wpływ warunków syntezy na syntezę nanowłókien węglowych metoda katalitycznego spalania etanolu
Autorzy:
Cheng, J.
Zou, X. P.
Zhu, G.
Wang, M. F.
Su, Y.
Yang, G. Q.
Lu, X. M.
Powiązania:
https://bibliotekanauki.pl/articles/354282.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
synteza
nanowłókna węglowe
spalanie
etanol
carbon nanofibers
ethanol catalytic combustion
influence factors
Opis:
In this paper, the effects of position of substrates in flames, preparation time, stability of flames and catalyst precursors on the synthesis of carbon nanofibers (CNFs) by ethanol catalytic combustion (ECC) were investigated. For investigating the effects of these influence factors on the synthesis of CNFs, several sets of controlled experiments were performed, such as preparation experiments with different position of substrates in flames, different preparation time, stable and unstable flames, and different catalyst precursors. In our experiments, the catalyst precursors were iron nitrate, cobalt nitrate, nickel nitrate, and iron chloride, cobalt chloride, nickel chloride. The as-synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. Our results indicate that the optimal position of substrates in flames is more than 1cm and less than 2.5cm, the optimal preparation time is more than 5min and less than 30min for massive yield, stable flames would be tent to synthesize CNFs with mainly single-type morphology and could improve the graphitization of CNFs, and the catalyst precursors obviously have effects on the synthesis of CNFs.
W niniejszej pracy zbadany został wpływ położenia substratów w płomieniach, czasu przygotowania, stabilności płomieni i prekursorów katalizatora na syntezę nanowłókien węglowych (CNFs) metodaą katalitycznego spalania etanolu (ECC). W celu zbadania wpływu tych czynników na syntezę nanowłókien węglowych przeprowadzono kilka zestawów kontrolowanych eksperymentów, przy różnej pozycji podłoży w płomieniach, różnym czasie przygotowania, płomieniach stabilnych i niestabilnych i przy użyciu różnych prekursorów katalizatora. W naszych eksperymentach jako prekursory katalizatora stosowano azotany: żelaza, kobaltu i niklu oraz chlorki żelaza, kobaltu i niklu. Tak otrzymane produkty syntezy scharakteryzowano za pomocą skaningowej mikroskopii elektronowej (SEM), transmisyjnej mikroskopii elektronowej (TEM) i spektroskopii Raman'a. Nasze wyniki wskazują, że optymalna pozycja podłoży w płomieniach to więcej niż 1 cm i mniej niż 2,5 cm, a optymalny czas przygotowania to więcej niż 5 min i mniej niż 30 min dla dużej wydajności. Stabilność płomieni będzie sprzyjać syntezie nanowłókien o morfologii jednego typu i może poprawić ich grafityzacje, a rodzaj prekursora katalizatora ma wpływ na syntezę nanowłókien.
Źródło:
Archives of Metallurgy and Materials; 2012, 57, 3; 745-751
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation on Stripping-down TNT from Waste Munitions by Supercritical CO2 Fluid Extraction under Low Temperature Conditions
Autorzy:
Yang, T.-M.
Li, J.-S.
Su, C.-S.
Lu, K.-T.
Yeh, T.-F.
Powiązania:
https://bibliotekanauki.pl/articles/358681.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
treatment of waste munitions
supercritical fluid extraction technique
TNT
stripping-down
low temperature conditions
Opis:
The traditional methods of waste munitions treatment are expensive and also have potential risks during the treatment process. The supercritical fluid extraction technique has been a rapidly developing technique in the chemical industry in recent years. CO2 is used as the solvent, which has some advantages, such as low pollution, low cost, good chemical stability and can be operated under low temperature conditions. This research explored the feasibility of reclaiming TNT from waste munitions by supercritical CO2 fluid extraction. It was found interestingly that the melting point of TNT can be lowered in supercritical CO2 fluid. Therefore, the melting process of TNT was observed under different temperature and pressure conditions to determine the best operating conditions for stripping-down TNT from waste munitions. Afterwards, simulated warheads with weight loadings of 60 g, 500 g and 1 kg of TNT were prepared and stripping-down tests from the simulated warheads were carried out using supercritical CO2 fluid at temperatures lower than the normal melting point of TNT. The results showed that TNT could be completely removed from the simulated warheads and the optimum operating conditions were determined as 55 °C and 25 MPa. This study will contribute to the feasibility evaluation of stripping-down TNT-based high explosives.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 1; 191-205
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Role of ammonium phosphate in improving the physical characteristics of malachite sulfidation flotation
Autorzy:
Ibrahim, Ayman M.
Jia, Xiaodong
Cai, Jinpeng
Su, Chao
Yu, Xingcai
Zheng, Qifang
Peng, Rong
Shen, Peilun
Liu, Dianwen
Powiązania:
https://bibliotekanauki.pl/articles/2200339.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
malachite sulfidation
sample preparation
ammonium phosphate
sodium sulfide
floatability
physical characteristics
Opis:
In this study, ammonium phosphate ((NH4)3PO4) was employed to realize improvement by modifying the physical characteristics of the malachite surface, ensuring sustainable flotation throughout the flotation operations, and enhancing the flotation process to be more stable. Furthermore, various techniques, including X-ray photoelectron spectroscopy, were intensely used to investigate the configuration and physico-chemical surface characteristics through micro-flotation experiments, contact angle and zeta potential measurements, and XRD, ToF-SIMS, EPMA, and FTIR spectrum analyses. The FTIR findings showed that new characteristic peaks of -C(=S)-N.H. groups formed and adsorbed on the surfaces of malachite at 1636 cm-1. The -CH2 groups throughout the flotation process, further promoted the attachment of the CH3 ligand to the Cu2+ ion, and the XPS analysis confirmed this. Consequently, it can be concluded that (NH4)3PO4 played a substantial part in the improved recovery rate, as demonstrated and confirmed by the methods carried out in this study. Thus, it was used to modify the physical properties surface before adding Na2S to efficiently enhance malachite floatability and reduce the loss rate of malachite. Regarding the alterations in the physical characteristics which occurred to the malachite surface, and as a consequence of increasing the recovery results of flotation, the malachite sample treated initially with (NH4)3PO4 exhibited micro flotation results with a considerably greater flotation recovery than malachite treated initially with only Na2S ions.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 1; art. no. 161510
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-8 z 8

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies