Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Markowska, J." wg kryterium: Autor


Tytuł:
Mściwojów Reservoir – study of a small retention reservoir with an innovative water self-purification system
Autorzy:
Dąbrowska, J.
Kempa, O.
Markowska, J.
Sobota, J.
Powiązania:
https://bibliotekanauki.pl/articles/123235.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
surface water quality
eutrophication
dam reservoir
phosphorus retention
Opis:
The study presents the characteristics of the Mściwojów Reservoir equipped with a unique pre-reservoir structure that supports the process of self-purification of waters. The authors present more than ten years of studies, focusing mainly on the issues of water quality and the concentration of phosphorus, which is considered as the main factor influencing water eutrophication process. Quite a high concentration of phosphates was noted in the outflow from the main reservoir, in spite of a lower concentration of these compounds in the water leaving the pre-reservoir. Basing on the conducted analyses, the catchment of the reservoir was qualified as group 4, being very prone to the movement and supply of material to the reservoir. The negative value of the retention coefficient of phosphorus obtained for the main part of the reservoir points to the existence of an internal source of phosphorus supply to the reservoir. During over 10 years of studies, new directions of the development of the rural areas were determined. Future works should be extended so as to cover all elements of the ecosystem of the reservoir. In a longer term it seems natural to extend the research works to cover the whole catchment of Wierzbiak River.
Źródło:
Journal of Ecological Engineering; 2014, 15, 2; 7-16
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Relationship between DNA replication and DNA repair in human lymphocytes proliferating in vitro in the presence and in absence of mutagen
Autorzy:
Szyfter, K
Wiktorowicz, K.
Wielgosz, M.S.
Zajaczek, S.
Kujawski, M.
Jaloszynski, P.
Czub, M.
Markowska, J.
Powiązania:
https://bibliotekanauki.pl/articles/2048210.pdf
Data publikacji:
1995
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
genotoxicity
DNA replication
human lymphocyte
DNA repair
lymphocyte proliferation
mutagenesis
in vitro
Opis:
The effects of mutagens on DNA replication and DNA repair were studied in peripheral blood lymphocytes (PBL) obtained from 21 healthy subjects, 2 samples from healthy heterozygote of Xeroderma pigmentosum (XP) and 2 samples from patient with clinically recognised XP. Inter-individual variations were found in DNA replication and in the level of spontaneous DNA repair measured under standard culture condition. Exposure of human PBL proliferating in vitro to B(a)P was followed by a partial inhibition of replicative DNA synthesis in all subjects and by an induction of DNA repair in healthy subjects. In XP patients DNA repair synthesis remained at the level attributed to spontaneous DNA repair. The response to mutagen varied individually. Results were analysed statistically. It was established that the studied indices of DNA synthesis correlate well with each other. The highest correlation was found between the levels of spontaneous and B(a)P-induced DNA repair. It is concluded that the level of spontaneous DNA repair is predictive for an estimation of cells ability to repair DNA damage. Inter-individual variations in the inhibition of DNA replication and in DNA repair synthesis are also dependent on the type of mutagen as shown by effects of other mutagens. Different effects of mutagen exposure on the inhibition of DNA replicative synthesis and induction of DNA repair can be explained by genetically controlled differences in the activity of enzymes responsible for mutagen processing and lesion removal.
Źródło:
Journal of Applied Genetics; 1995, 36, 4; 379-388
1234-1983
Pojawia się w:
Journal of Applied Genetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza wybranych czynników molekularnych i klinicznych u pacjentek leczonych z powodu raka jajnika taksanami i cisplatyną
Analysis of selected molecular and clinical factors in patients with ovarian cancer treated with taxanes and cisplatin
Autorzy:
Ziółkowska-Seta, I.
Derlatka, P.
Sobiczewski, P.
Panek, G.
Kraszewska, E.
Kupryjańczyk, J.
Bidziński, M.
Mądry, R.
Markowska, J.
Powiązania:
https://bibliotekanauki.pl/articles/908278.pdf
Data publikacji:
2006
Wydawca:
Medical Communications
Tematy:
BAX
BCL-2
TP53
ovarian cancer
taxanes
Opis:
Introduction: Paclitaxel and platinum analogs are standard drugs implemented as first-line therapy in advanced ovarian cancer, after previous surgery. One of causes of resistance to therapy is, among others, disruption of mechanisms leading to cell apoptosis. Aim of the paper is to determine the significance of expression of TP53, BAX and BCL-2 in response to first-line chemotherapy using paclitaxel in patients with advanced ovarian cancer, as well as to assess the role of TP53 as a prognostic and predictive factor in ovarian cancer. Material and method: The study included 164 patients with advanced ovarian cancer. Immunohistochemical staining was performed on histological specimens obtained from paraffin blocks. Monoclonal antibodies anti-BAX, anti-BCL-2 and anti-p53 were used. Results: Accumulation of TP53 was noticed in 60% of tumors. BCL-2 was absent in half of tumors studied. Significant expression of BCL-2 was noticed in 24% of tumors, while that of BAX was seen in 34% of tumors. There was a correlation of histological grade, volume of residual tumor left after surgery and BAX expression with overall survival. Enhanced expression of BAX correlated directly with increased death risk. Accumulation of none of proteins studied had any influence on disease-free survival. Complete remission was obtained in 106 patients. Size of residual tumor has a significant impact on disease-free survival. Conclusions: 1) In ovarian cancer patients, clinical factors clearly have far greater prognostic value than molecular factors. 2) There was no correlation between TP53 expression and clinical response to first-line chemotherapy using paclitaxel, cisplatin or platinum analogs. 3) TP53 expression is not a prognostic or predictive factor in ovarian cancer.
Wstęp:Paklitaksel i analogi platyny są standardem postępowania w pierwszej linii leczenia w zaawansowanym raku jajnika, po uprzedniej chirurgii. Przyczyną oporności na leczenie jest między innymi uszkodzenie mechanizmów prowadzących do apoptozy. Celem naszej pracy jest określenie znaczenia ekspresji TP53, BAX i BCL-2 w odpowiedzi na chemioterapię pierwszej linii z zastosowaniem paklitakselu u pacjentek z zaawansowanym rakiem jajnika, jak również ocena TP53 jako czynnika prognostycznego i predykcyjnego w raku jajnika. Materiał i metody: Badanie przeprowadzono u 164 chorych z zaawansowanym rakiem jajnika. Barwienia immunohistochemiczne zostały wykonane na materiale z bloczków parafinowych. Stosowano przeciwciała monoklonalne anty-BAX, anty-BCL-2 i anty-p53. Wyniki: Akumulację TP53 stwierdzono w 60% guzów. Obecności BCL-2 nie wykazano w połowie badanych guzów. Silną ekspresję BCL-2 stwierdzono w 24%, zaś silną ekspresję BAX – w 34% guzów. Wykazano wpływ histologicznego stopnia zaawansowania, wielkości pozostawionych resztek oraz ekspresji BAX na całkowite przeżycia. Przy silnej ekspresji BAX ryzyko zgonu było większe. Akumulacja żadnego białka nie miała wpływu na długość czasu wolnego od choroby. Całkowitą remisję uzyskano u 106 pacjentek. Wielkość pozostawionych resztek miała znaczący wpływ na długość czasu wolnego od choroby. Wnioski: 1) Czynniki kliniczne mają zdecydowanie większe znaczenie prognostyczne niż czynniki molekularne w raku jajnika. 2) Nie zaobserwowano związku pomiędzy stanem TP53 a odpowiedzią na leczenie pierwszej linii chemioterapii z zastosowaniem paklitakselu i cisplatyny lub analogów platyny. 3) Nie wykazano znaczenia TP53 jako czynnika prognostycznego i predykcyjnego w raku jajnika.
Źródło:
Ginekologia Onkologiczna; 2006, 4, 4; 220-229
1731-5379
Pojawia się w:
Ginekologia Onkologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The analysis of the kinematic accuracy of the actual harmonic drive on a test bench
Analiza dokładności kinematycznej przekładni falowej na stanowisku badawczym
Autorzy:
Pacana, J.
Markowska, O.
Powiązania:
https://bibliotekanauki.pl/articles/175599.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
harmonic drive gear
angle deviation
kinematic accuracy
bench testing
przekładnia falowa
odchyłka kątowa
dokładność kinematyczna
badania stanowiskowe
Opis:
The article presents the results of experimental harmonic drive gear. An analysis of the accuracy of the rotary motion of the transmission was made. The analysis included determining the kinematic deviations in various measuring ranges. The study was conducted on a specially prepared test bench, on a physical model of a harmonic drive. The transmission has been designed, made and tested for the geometric correctness in accordance with applicable standards. The measurements of the angles of the rotation of the passive shaft were carried out with high accuracy using the optical dividing head and compared with the theoretical values. On that basis, according to the Polish PN-ISO 1328-1: 2000, they were determined kinematic displacement values, which were compared with the limit values.
W artykule przedstawiono wyniki badań eksperymentalnych zębatej przekładni falowej. Prowadzono analizę dokładności ruchu obrotowego przekładni, poprzez określanie wartości odchyłki kinematycznej dla różnych zakresów wartości pomiarowych. Badania wykonano na specjalnie przygotowanym stanowisku pomiarowym, dla fizycznego modelu zębatej przekładni falowej. Przekładnię zaprojektowano, wykonano oraz sprawdzono pod względem poprawności geometrycznej, zgodnie z obowiązującymi normami. Pomiar wartości kąta obrotu wałka biernego prowadzono przy zastosowaniu podzielnicy optycznej. Wykonano analizę porównawczą z uwzględnieniem ustalonych wartości teoretycznych kąta obrotu. Była podstawą określenia zgodnie z PN-ISO 1328-1:2000 wartości odchyłek kinematycznych, które porównywano z wartościami dopuszczalnymi.
Źródło:
Advances in Manufacturing Science and Technology; 2016, 40, 1; 47-54
0137-4478
Pojawia się w:
Advances in Manufacturing Science and Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The flexspline of the harmonic drive with different tooth profile
Koło podatne przekładni falowej o różnych zarysach zębów
Autorzy:
Pacana, J.
Markowska, O.
Powiązania:
https://bibliotekanauki.pl/articles/176285.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
harmonic drive
flexspline
finite element method
FEM
ADINA
zębata przekładnia falowa
koło podatne
metoda elementów skończonych
MES
Opis:
This article presents the process of determining reduced stress which occurs during the deformation of the flexspline of the toothed harmonic drive. The discussed issue is complex as the stress distribution results from the deformation of the flexspline by the generator and from the load it carries. The article takes into account flexsplines of various tooth profiles: involute, rectilinear and convexo-concave (BBW). The flexspline was deformed by the double-roll generator. To conduct numerical calculations ADINA software, based on the Finite Element Method (FEM), was used. The calculation results for each tooth profile were put together for comparison and evaluation.
W pracy zaprezentowano proces wyznaczania naprężeń zredukowanych powstających w odkształcanym kole podatnym falowej przekładni zębatej. Dotyczy to złożonego zagadnienia – występujące naprężenia są skutkiem zarówno odkształceń koła na skutek działania generatora, jak również przenoszonego obciążenia. W pracy uwzględniono koła o różnym zarysie zębów: ewolwentowym, prostoliniowym i kołowo-łukowym (BBW). Koło podatne poddano odkształceniu przy użyciu generatora dwurolkowego. Do obliczeń numerycznych przyjęto metodę elementów skończonych (MES) i program ADINA. Przeprowadzono analizę porównawczą wyników obliczeń dla różnych zarysów zębów. Wyniki obliczeń otrzymanych dla różnych zarysów zębów zostały zestawione ze sobą w celu ich porównania i oceny.
Źródło:
Advances in Manufacturing Science and Technology; 2017, 41, 4; 23-30
0137-4478
Pojawia się w:
Advances in Manufacturing Science and Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estimation of the load carrying capacity of the timber beams strengthened with FRP strips
Szacowanie nośności belek drewnianych wzmacnianych taśmami FRP
Autorzy:
Brol, J.
Markowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/9545.pdf
Data publikacji:
2014
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Opis:
This article presents general rules of determining load carrying capacity of timber beams strengthened with FRP materials with accordance to the American Standard PCF-5100 with relevance to the European. In addition, the conclusions from the comparison of the theoretical load carrying capacity and deflections evaluated on basis of PCF-5100 and PCF-6046 with the results of the laboratory tests conducted on full-scale beams are presented.
Szacowanie nośności belek drewnianych wzmacnianych taśmami FRP. W artykule przedstawiono metodykę wyznaczania nośności belek drewnianych wzmacnianych FRP według amerykańskiej normy PCF-5100 z uwzględnieniem uwarunkowań Europejskich. Przedstawiono również wnioski z porównania wyznaczania nośności i wielkości ugięć wg norm PCF-5100 i PCF-6046 z badaniami laboratoryjnymi na belkach w skali technicznej.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology; 2014, 88
1898-5912
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An evaluation of GIS tools for generating area cartograms
Autorzy:
Markowska, A.
Korycka-Skorupa, J.
Powiązania:
https://bibliotekanauki.pl/articles/92528.pdf
Data publikacji:
2015
Wydawca:
Oddział Kartograficzny Polskiego Towarzystwa Geograficznego
Tematy:
cartogram
area cartograms
GIS
Opis:
The purpose of this article is to report a study aimed at systematic assessment of the functionality of commercially available software for the automatic generation of area cartograms. The issue of the wide choice of algorithms developed over the years for generating various types of surfaces has also been raised. Cartograms (called also anamorphic maps) are constructed by changing the surface area of each spatial unit in step with the corresponding value of the mapped thematic variable (area cartogram) or changing accordingly the distance between the preselected focal point and other points on the map (distance cartogram). Depending on the shape of mapping units, the following three types of area cartograms can be distinguished: - proportional symbol cartograms were the original shapes of mapping units have been replaced with simple geometric shapes such as squares, rectangles or circles (for example, Dorling Circle Cartograms, square cartogram); - continuous regular cartograms where the shapes of areal units on the map resemble the actual shapes of the mapped units but their boundaries have been geometrized to consist of perpendicular sections; - continuous irregular cartograms where the shapes of areal units on the map resemble the actual shapes of the mapped units but unit boundaries are not straight lines. Cartograms can also be constructed to preserve spatial contiguity (continuous cartograms) or not (noncontinuous cartograms), with the latter often preserving the underlying neighborhood relationships to some degree. While constructing area cartogram, one needs to decide first the type of a surface to be developed, and therefore, the algorithm to be applied. The next step in map construction is the choice of software, where tool selection depends often on the predetermined type of the cartogram. The study surveyed five programs for the construction of area cartograms – all available free of charge. Each of those software tools was used to generate area cartograms portraying data from the 2010 presidential election in Poland. Two groups of area cartograms where generated for the purpose of this study: maps of the entire Poland by voivodships, showing the number of valid votes cast for the two presidential candidates in each voivodship, and maps of the Mazowieckie voivodship by county, portraying the number of valid votes cast for the individual candidates in each county. The subsequent in-depth assessment of surveyed programs took into account eleven criteria including the number of cartogram types that might be developed using each program, availability of tools for the proper legend construction and display, possibility of supplementing the cartogram with complementary choropleth maps, the option for inserting map labels, the type of spatial data that can be used in the software (reference to points, lines, polygons) and so on. The study has demonstrated that the tool included in the ArcGIS (Cartogram Utility for ArcGIS) best met the survey criteria scoring 9 points. The application Scape Toad placed second (7.5 pts.), while MapViewer 7 came third (6.25 pts.). When generating cartograms in the available GIS programs, one should also pay attention to the visual qualities of the generated maps, and in particular, to the resemblance of shapes of spatial units on the map to the their actual geographic boundaries. Since the shape outlines obtained on the map vary depending on the underlying geodetic reference system, the best coordinate system for the mapped area should be selected. However, if such system cannot be used within a given cartogram generating tool, then the obtained cartogram should be exported and refined with some general software package for graphic editing.
Źródło:
Polish Cartographical Review; 2015, 47, 1; 19-29
2450-6974
Pojawia się w:
Polish Cartographical Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Hydrothermal Conditions on Oats Yields in East-Central Poland (1975–2005)
Autorzy:
Radzka, E.
Jankowska, J.
Markowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/125480.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
hydrothermal coefficient
growing season
oats
yield
central-eastern Poland
Opis:
The objective of the work was to evaluate the effect of hydrothermal conditions on oats yields produced in east-central Poland. Hydrothermal conditions were determined based on the Sielianinov’s hydrothermal coefficient for nine IMGW (Institute of Meteorology and Water Management) stations located in the study area. The second data set consisted of oats yields compiled and published by the Main Statistical Office. Average yields as well as minimum and maximum yields were analysed. The relationship between oats yields and hydrothermal conditions was examined using a step-wise linear regression model. Correlation coefficients were negative in April and positive in June at all the stations. The relationships were confirmed by an analysis of regression equations. The regression equations also included coefficients for May and June which, however, were not statistically significant. Yield variation, described by regression equations of the dependence of oats yield on Sielianinov’s hydrothermal coefficient value was accounted for from 19 (Siedlce, Biała Podlaska) to 50% (Ostrołeka).
Źródło:
Journal of Ecological Engineering; 2015, 16, 3; 184-188
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Interrelations between selected physical and technological properties of wheat grain
Autorzy:
Warechowska, M.
Warechowski, J.
Markowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/298001.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
wheat
grain
physical properties
technological properties
geometrical properties
Opis:
The aim of this work was to determine selected physical properties of wheat grain which are of significance in transport, separation and storage processes as well as to assess the correlations between them and the technological properties of wheat. The grain of two wheat varieties (Eta and Banti) which are popular in Poland was used as research material. The tested properties included: vitreousness, test weight, thousand kernel weight, true density, geometric parameters (thickness, width, length), static friction coefficient of wheat kernels against steel and glass, protein and gluten content and the Zeleny sedimentation value. The grain of the investigated wheat varieties differed in most physical and technological properties. The average length, width and thickness kernels were 6.31 mm, 3.31 mm and 3.03 mm for vr. Banti and 6.05 mm, 3.33 mm, 2.97 mm for vr. Eta. The test weight ranged from 75.68 (Banti) to 78.29 kg • hl-1 (Eta), the thousand kernel weight from 36.3 (Eta) to 39.2 g (Banti) and vitreousness was from 13 (Banti) to 81% (Eta). A correlation between the physical and technological properties of wheat was found. The vitreousness of the wheat grain was positively correlated with protein content (the correlation indices were 0.58 for Banti variety and 0.67 for Eta) and the volume was positively correlated with the true density of grain (r = -0.69 Eta, r = -0.64 Banti). The static coefficient of the friction of wheat grains of two structural materials (metal or glass) is insufficient to predict its technological properties.
Źródło:
Technical Sciences / University of Warmia and Mazury in Olsztyn; 2013, 16(4); 281-290
1505-4675
2083-4527
Pojawia się w:
Technical Sciences / University of Warmia and Mazury in Olsztyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of moisture on external friction coefficient and basic physical properties of Astoria variety wheat grain
Autorzy:
Markowska, A.
Warechowska, M.
Warechowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/298369.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
wheat grain
angle of repose
tilting box method
moisture content
coefficient of external friction
Opis:
This paper analyzed the effect of moisture content on selected physical properties of Astoria variety wheat grain using six levels of grain moisture content (14%, 16%, 18%, 20%, 22% and 24%). The following were determined for each level of moisture content: angle of repose, static angle of repose (SAR), bulk density and thousand kernel weight. The friction coefficients for four different construction materials (CEF) were also determined: acid-resistant steel, wear-resistant steel, plastic (PPLD) and rubber. It was found that an increasing moisture content in grains was accompanied by an increase in the thousand kernel weight, angle of repose, SAR, as well as the CEF against each of the surfaces used in the study. The highest value of the CEF was recorded for a rubber surface (0.782) and the smallest was for a polypropylene surface (0.443). The highest values of the angle of repose and the SAR were recorded for the grain with the highest moisture content: 37.15o and 39.44o, respectively. An increase in the moisture content in kernels reduced their bulk density from 79.870 kg · hl–1 (moisture content: 14%) to 68.783 kg · hl–1 (moisture content 24%).
Źródło:
Technical Sciences / University of Warmia and Mazury in Olsztyn; 2016, 19(1); 17-26
1505-4675
2083-4527
Pojawia się w:
Technical Sciences / University of Warmia and Mazury in Olsztyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stability of selenium diet supplement
Autorzy:
Grzechulska-Damszel, J.
Markowska-Szczupak, A.
Morawski, A. W.
Powiązania:
https://bibliotekanauki.pl/articles/777921.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
selenium supplementation
chemical analysis
microbial analysis
stability
Opis:
Selenium is one of the trace elements playing a crucial role in a proper function of living organisms. Selenium intake varies, largely based on the selenium content of food. The daily Se intake recommended for adults amounts to 55 μg per day. The mean level of selenium in the population varies considerably between countries. Recent studies on the selenium dietary intakes in Poland showed that it is not sufficient to meet the daily requirement for this microelement so it is strongly recommended to employ selenium supplementation. The commercial product SEL-BRCA1®  being a selenium diet supplement was subjected to chemical and microbial analysis to determine its stability in storage time and conditions. Basing on the obtained results it can be stated that the stability of studied supplement, stored in the closed bottles, can be confirmed for the period of time up to 45 months after the production date and it is not recommended to store opened bottles for the period of time longer than 12 months. The studied supplement showed a very high microbial stability what underscores its usefulness as human medicines.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 4; 84-87
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heuristic algorithms applied to the problems of servicing actors in supply chains
Autorzy:
Izdebski, M.
Jacyna-Gołda, I.
Markowska, K.
Murawski, J.
Powiązania:
https://bibliotekanauki.pl/articles/224087.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
supply chain
genetic algorithm
ant algorithm
łańcuchy dostaw
algorytm genetyczny
algorytm mrówkowy
Opis:
The paper discusses main decision problems analysed in the subject matter of servicing actors operating in the supply chains, i.e. the vehicle routing problem, vehicles-to-task assignment problem and the problem of entities’ localization in the supply chain. The input data used to describe supply chains is given as well as the basic constraints and the criterion functions used in the development of mathematical models describing the supply chains. Servicing actors in supply chains is the complex decision making problem. Operators in the supply chains are constrained by: production capacity of the suppliers, the demand of the customers in particular working days, storage capacities of warehouses, handling capacities of warehouses, suppliers’ and warehouses’ time windows and other. The efficiency of supply chain is described by cost of transport between operators, costs of passing cargoes through warehouses and delivery time to the recipient. The heuristic algorithms, like genetic and ant algorithms are detailed and used to identify issues related to the operation of actors operating in the supply chains are described. These algorithms are used for solving localization problems in supply chains, vehicle routing problems, and assignment problems. The complexity of presented issues (TSP is known as NP-hard problem) limits the use of precise algorithms and implies the need to use heuristic algorithms. It should be noted that solutions generated by these algorithms for complex decision instances are sub-optimal solutions, but nonetheless it is accepted from the practical point of view.
Źródło:
Archives of Transport; 2017, 44, 4; 25-34
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selection of a Container Storage Strategy at the Rail-road Intermodal Terminal as a Function of Minimization of the Energy Expenditure of Transshipment Devices and CO2 Emissions
Dobór strategii składowania kontenerów w lądowym terminalu intermodalnym w funkcji minimalizacji wydatku energetycznego urządzeń przeładunkowych i emisji CO2
Autorzy:
Jachimowski, R.
Szczepański, E.
Kłodawski, M.
Markowska, K.
Dąbrowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/1813739.pdf
Data publikacji:
2018
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
intermodal transport
rail-road intermodal terminal
containers storage strategies
CO2 emission
simulation analysis
FlexSim
transport intermodalny
terminal intermodalny kolejowo-drogowy
strategie składowania kontenerów
emisja CO2
analiza symulacyjna
Opis:
The article presents the problem of containers storage on a storage yard in an rail-road intermodal land and the emission of harmful exhaust gases into the atmosphere. This issue was considered from the point of view of the distance traveled by transshipment devices, the duration of loading work and the resulting energy expenditure and CO2 emissions. The research was dictated by the current limited number of publications in the area of the distribution of containers on storage yards in rail-road intermodal terminals. The vast majority of the literature is devoted in this field to marine intermodal terminals, which operating characteristics are different from inland terminals. The importance of this problem resulting from the growing turnover of containers transported by rail transport was also pointed out. The systematic increase of this type of transport and the depletion of the intermodal services' operating capability makes it necessary to improve the processes taking place in the storage area. The possibility of improving these processes in addition to the use of computer tools is also realized through the use of modern transshipment devices. Depending on the area of their operation and the scope of their application, these devices use various types of power supply, which affect environmental pollution. In the case of gantry cranes considered in this article, their power supply may come from both combustion engines, hybrids and electric engines. Therefore, from the point of view of minimization of harmful exhaust gases emissions into the atmosphere, in the article, the problem of choosing the device for carrying out transshipment tasks was also taken up. For the purposes of the research, the processes of container handling in the rail-road intermodal terminal have been presented in detail. A review of literature in the field of container storage methods and strategies was carried out. The considered container reloading processes in the wagon-yard relation were modeled in the FlexSim simulation environment. The constructed simulation model was used to develop 5 variants of the distribution of containers on the storage yard as a function of their location on the train. Container deployments on the storage yard were carried out for both random and fixed distribution of containers on the train. In the case of a random arrangement of containers on the train, the tests were carried out for 100 replications. On the basis of simulation tests, the distance covered by the transshipment device (RTG crane) and the time of carrying out the loading tasks in particular variants were determined. Using the crane data provided by the crane manufacturer, the energy expenditure was calculated in individual variants for different power supply methods (combustion engine, hybrid, electric engine). The obtained results allowed the selection of the best strategy for containers storage, taking into account the amount of CO2 emitted to the atmosphere by transshipment devices.
W artykule przedstawiono problematykę składowania kontenerów na placu składowym w lądowym terminalu intermodalnym i związaną z tym emisją szkodliwych związków spalin do atmosfery. Zagadnienie to rozważano z punktu widzenia dystansu pokonywanego przez urządzenia ładunkowe, czasu trwania prac ładunkowych oraz wynikającego z tego wydatku energetycznego i emisją CO2. Przeprowadzone badania podyktowane były dotychczasową niewielką liczbą publikacji na temat badania rozmieszczenia kontenerów na placach składowych w lądowych, kolejowo-drogowych terminala intermodalnych. Zdecydowana większość literatury poświęcona jest w tym zakresie morskim terminalom intermodalnym, których charakterystyka pracy różni się od tej w terminalach lądowych. Wskazano także na istotność tego problemu wynikającą z rosnących obrotów kontenerów przewożonych transportem kolejowym. Systematyczny wzrost tych przewozów i wyczerpywanie się zdolności obsługowych terminali intermodalnych powoduje konieczność usprawniania zachodzących tam procesów. Możliwość usprawniania tych procesów oprócz zastosowania narzędzi komputerowych realizowana jest także dzięki wykorzystaniu nowoczesnych urządzeń przeładunkowych. Urządzenia te w zależności od obszaru ich działania i zakresu ich zastosowania wykorzystują różne rodzaje zasilania, które w większym, bądź mniejszym stopniu wpływają na zanieczyszczenia środowiska. W przypadku rozważanych w niniejszym artykule suwnic jezdniowych, zasilanie to pochodzić może zarówno z silników spalinowych, hybrydowych jak i silników elektrycznych. Stąd też z punktu widzenia minimalizacji wielkości emisji szkodliwych związków spalin do atmosfery w artykule podjęto także problematykę wyboru urządzenia do realizacji zadań przeładunkowych. Na potrzeby badań szczegółowo przedstawiono procesy obsługi kontenera w lądowym terminalu intermodalnym. Dokonano przeglądu literatury w zakresie metod i strategii składowania kontenerów. Rozważane procesy przeładunku kontenerów w relacji wagon-plac składowy zamodelowano w środowisku symulacyjnym FlexSim. Zbudowany model symulacyjny posłużył do opracowania 5 wariantów rozmieszczenia kontenerów na placu w funkcji ich rozmieszczenia na pociągu. Badania rozmieszczenia kontenerów na placu składowym wykonywano zarówno dla losowego jak i ustalonego rozmieszczenie kontenerów na pociągu. W przypadku losowego rozmieszczenia kontenerów na pociągu próby wykonywano dla 100 powtórzeń. Na podstawie badań symulacyjnych określono dystans pokonywany przez urządzenie przeładunkowe (suwnicę RTG) oraz czas realizacji prac ładunkowych w poszczególnych wariantach. Wykorzystując podawane przez producenta suwnic dane o wielkości zużywanej przez suwnicę energii obliczono jej wydatek energetyczny w poszczególnych wariantach dla różnych sposobów zasilania (silnik spalinowy, hybrydowy, elektryczny). Uzyskane wyniki pozwoliły na wybór najlepszej spośród rozważanych, strategii składowania kontenerów na placu przy uwzględnieniu wielkości emitowanego przez urządzenia przeładunkowe CO2 do atmosfery.
Źródło:
Rocznik Ochrona Środowiska; 2018, Tom 20, cz. 2; 965-988
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Health-Related Physical Fitness, BMI, physical activity and time spent at a computer screen in 6 and 7-year-old children from rural areas in Poland
Autorzy:
Ciesla, E.
Mleczko, E.
Bergier, J.
Markowska, M.
Nowak-Starz, G.
Powiązania:
https://bibliotekanauki.pl/articles/50158.pdf
Data publikacji:
2014
Wydawca:
Instytut Medycyny Wsi
Opis:
The objective of the study was determination of the effect of various forms of physical activity, BMI, and time devoted to computer games on the level of Health-Related Physical Fitness (H-RF) in 6–7-year-old children from Polish rural areas. The study covered 25,816 children aged 6–7: 12,693 girls and 13,123 boys. The evaluations included body height and weight, and 4 H-RF fitness components (trunk strength, explosive leg power, arm strength and flexibility). The BMI was calculated for each child. The Questionnaire directed to parents was designed to collect information concerning the time devoted by children to computer games, spontaneous and additional physical activity. The strength of the relationships between dependent and independent variables was determined using the Spearman’s rank correlation (RSp), and the relationship by using the regression analysis. The BMI negatively affected the level of all the H-RF components analysed (p=0.000). The negative effect of computer games revealed itself only with respect to flexibility (p=0.000), explosive leg power (p=0.000) and trunk muscle strength (p=0.000). A positive effect of spontaneous activity was observed for flexibility (p=0.047), explosive leg power (p=0.000), and arm strength (p=0.000). Additional activity showed a positive relationship with trunk muscles strength (p=0.000), and explosive leg power (p=0.000). The results of studies suggest that it is necessary to pay attention to the prevention of diseases related with the risk of obesity and overweight among Polish rural children as early as at pre-school age. There is also a need during education for shaping in these children the awareness of concern about own body, and the need for active participation in various forms of physical activity.
Źródło:
Annals of Agricultural and Environmental Medicine; 2014, 21, 3
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Low genetic differentiation between two morphotypes of the gastropod Nacella concinna from Admiralty Bay, Antarctica
Autorzy:
Chwedorzewska, Katarzyna J.
Korczak, Małgorzata
Bednarek, Piotr T.
Markowska-Potocka, Marta
Powiązania:
https://bibliotekanauki.pl/articles/2051614.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Antarctica
Nacella concinna
genetic diversity
AFLP
Źródło:
Polish Polar Research; 2010, 2; 195-200
0138-0338
2081-8262
Pojawia się w:
Polish Polar Research
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies