Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Madej, K." wg kryterium: Autor


Tytuł:
Oil and gas fields in the Carpathians and the Carpathian Foredeep
Autorzy:
Górka, A.
Gliniak, P.
Madej, K.
Maksym, A.
Powiązania:
https://bibliotekanauki.pl/articles/2066022.pdf
Data publikacji:
2007
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
gas fields
oil fields
Carpathian Foredeep
Carpathians
sub-miocene basement
reserves
activity in the South of Poland
Opis:
Southeastern Poland is one of the oldest petroleum provinces in the world. Although hydrocarbon production has been conducted in this region since the middle of 19th century, there is still a good potential for more discoveries. 9 billion cubic meters of high methane gas reserves reported in the years 2000-2006, when combined with the previously discovered gas fields, essentially satisfy gas demand for this area. Currently, Miocene deposit of the Carpathian Foredeep is the most prolific exploration target area with more than 100 discoveries of high methane gas. The total reserves of these fields are 138 billion cubic meters, and the cumulative production is more than 90 billion cubic meters of natural gas. Large gas fields in terms of area and reserves that have already been discovered are followed by present discoveries of fields with relatively smaller area, their reserves are up to 2 billion cubic meters. Current exploration efforts are focused on good understanding of the sub-miocene basement configuration as well as detecting of seismic anomalies directly related to natural gas accumulations. Another very important element of exploration strategy for Southern Poland is the Mesozoic and Paleozoic deposits of the Carpathian Foredeep. The most prospective for discovering of sizeable hydrocarbon fields are Cretaceous (Cenomanian) sandstones and Upper Jurassic carbonates, locally also Middle Jurassic sandstone as well as Lower Carboniferous and Devonian carbonates. So far 13 gas fields and 10 oil fields have been discovered in the Mesozoic and Paleozoic of the Carpathian Foredeep and the sub-Carpathian basement with booked reserves of 7.5 billion cubic meters of natural gas and 4.7 million tons of oil. The cumulative production amounts to 6.1 billion cubic meters of gas and 4.3 million tons of oil. Different exploration problems have been encountered in the Carpathians. Most of the fields which have been discovered in the Flysch Carpathians occur in shallow, steep, narrow, commonly thrusted and faulted folds. Oil and gas fields discovered so far in the Carpathians have small reserves. Additionally, discovered and booked reserves of existing oil and gas fields are depleted to a large extent. 17 gas fields and 67 oil fields have been discovered in the Carpathians. Booked reserves amount to 16.6 billion cubic meters of natural gas and 12.3 million tons of oil. Cumulative production has been 15.2 billion cubic meters of gas and 11.9 million tons of oil. To sum up, it should be emphasized that the bulk of gas reserves discovered, booked and developed recently in Southern Poland comes from the autochthonous Miocene deposits. This trend, which involves high methane gas, is expected to continue for the next few years. Potential oil discoveries can be attributed mainly to the flysch Carpathians and Paleozoic, but requires more research and further exploration on a larger scale.
Źródło:
Przegląd Geologiczny; 2007, 55, 12/1; 993-998
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of influence of the martensite volume fraction on DP steels behavior during plastic deformation
Analiza numeryczna wpływu ułamka objętości martenzytu na zachowanie stali DP podczas odkształcenia plastycznego
Autorzy:
Perzyński, K.
Madej, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/350830.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pękanie
stal dwufazowa
cyfrowa reprezentacja materiału
fracture
dual-phase steel
digital material representation
Opis:
Development of a comprehensive fracture model, which takes into account crack initiation and propagation behavior at the microscale level in the Dual Phase (DP) steels is presented in the present paper. At this stage of the research Authors proposed a numerical model, which takes into account ductile crack initiation and propagation through the ferrite phase. Developed model is based on digital material representation (DMR) of DP microstructure, which takes opportunity for modeling crack phenomena in an explicit manner. Proposed model of ductile crack behavior in the ferritic phase is based on the Johnson-Cook model. Particular attention is put on investigation of influence of martensite volume fraction in microstructure on failure behavior. Obtained results for two significantly different martensite volume fractions in the investigated microstructure are presented in this work.
Celem niniejszej pracy jest opracowanie kompleksowego wieloskalowego modelu pękania uwzględniającego mechanizmy inicjalizacji oraz propagacji uszkodzeń na poziomie mikrostruktury w stalach dwu fazowych typu dual-phase (DP). Na tym etapie pracy zaproponowano model numeryczny, który uwzględnia mechanizmy powstawania i propagacji pęknięć o charakterze ciągliwym. Opracowany model bazuje na jawnej cyfrowej reprezentacji mikrostruktury, która pozwala na dokładne odzwierciedlenie zjawiska pękania występującego w materiale. W modelu wykorzystano podejście oparte o model Johnsona-Cooka do opisu ciągliwego pękania propagującego się w ferrycie. Głównym celem pracy jest analiza wpływu ułamka objętości martenzytu w mikrostrukturze na charakter propagacji pęknięć. Opracowany model oraz uzyskane wyniki obliczeń dla dwóch mikrostruktur o diametralnie różnym ułamku objętościowym martenzytu przedstawiono w niniejszej pracy.
Źródło:
Archives of Metallurgy and Materials; 2013, 58, 1; 211-215
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected problems of abrasion resistance of aluminized steel tubes
Wybrane problemy odporności na ścieranie aluminiowych rur stalowych
Autorzy:
Żaba, K.
Madej, M.
Powiązania:
https://bibliotekanauki.pl/articles/352689.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminiowa rura stalowa
powłoki
grubość
chropowatość
ścieranie
aluminized steel tube
coatings
thickness
roughness
abrasion
Opis:
The results of investigations, performed both under industrial and laboratory conditions, of the selected problems concerning the abrasion resistance of the aluminized steel strips and tubes are presented in the paper. Steel strips and tubes of the DX52D+AS120 grade with the Al-Si coating (of a silica content 9-12% and thickness ca 20 žm), hot dip on both sides were tested. The coating surfaces on the charge strip used for production of welded tubes were observed. Tests of thickness and roughness changes carried out on fragments of open-joint tube and on the finished product constituted the bases for laboratory investigations. An influence of various lubricating-cooling mediums on the abrasion resistance of the Al-Si coating was determined in laboratory tests. Investigations allowed to select the medium, which fulfils the expectations considering the coating surface quality in relation to its abrasion resistance. Devices for non-destructive coating thickness and roughness measurements were applied. The digital photo apparatus and optical microscope were used for illustrating coating changes due to abrasion tests.
Źródło:
Archives of Metallurgy and Materials; 2011, 56, 4; 859-869
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical modeling of fracture during nanoindentation of the TiN coatings obtained with the PLD process
Autorzy:
Perzyński, K.
Madej, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/202038.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
crack
nanoindentation
nanolayers
TiN
XFEM
Opis:
In order to improve mechanical, frictional or biocompatibility behavior of well know materials like titanium (Ti) or titanium nitride (TiN) scientists are trying to develop new manufacturing and processing operations. One of those methods, that provide interesting results, is called deposition process. During deposition a material is upgraded with new surface layers that are characterized by specific required properties. These layers have usually different mechanical properties in comparison with a substrate material. A combination of different properties of the deposited layers can significantly change behavior of the structure under an exploitation condition. However, layers have usually nanometer scale, which causes problems with performing standard plastometric tests. One of the possibilities to solve this issue is an application of specially designed tests like nanoindentation. Nanoindentation can provide valuable information regarding mechanical and strength behavior of nanostructure components. These investigations are of importance to properly identify and design properties of the mentioned deposited materials. Unfortunately, experimental analyses at these scales are usually very expensive. That is why Authors decided to develop a numerical model of the nanoindentation test to investigate material behavior under loading conditions that can support experimental research. The overall aim of this research is development of a failure model, which can take into account morphology of microstructure of ceramic TiN layer deposited on the silicon substrate. Modeling of crack behavior was realized on the basis of the extended finite element method (XFEM).
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2013, 61, 4; 973-978
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Usability of fly ash for filtration barriers
Przydatność popiołów lotnych do wykonywania barier przeciwfiltracyjnych
Autorzy:
Gruchot, A.
Madej, A.
Kos, K.
Powiązania:
https://bibliotekanauki.pl/articles/81587.pdf
Data publikacji:
2014
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Opis:
The results of permeability and compressibility tests of the fly ash from Skawina Power Plant were presented in the paper. These tests were carried out in the aspect of its usage in filtration barriers in municipal and industrial waste landfi lls. It was stated that the tested fly ash can not be used for fi ltration barriers, mainly because of granulation and fi ltration criteria. Although, the addition of another soil or a hydraulic binding agent would improve its granulation and would increase impermeability.
W pracy przedstawiono wyniki badań współczynników filtracji i ściśliwości popiołów lotnych pochodzących ze zsypów przy elektrofiltrach Elektrowni „Skawina”. Badania były prowadzone w aspekcie oceny możliwości wykorzystania popiołów do budowy barier przeciwfiltracyjnych składowisk komunalnych i przemysłowych odpadów. Stwierdzono, że przedmiotowe popioły lotne nie mogą stanowić materiału do formowania barier przeciwfiltracyjnych, głównie ze względu na kryterium uziarnienia i filtracji. Stosując jednak zabiegi związane z doziarnieniem popiołów lub stosując spoiwa hydrauliczne, można polepszyć ich uziarnienie i zwiększyć szczelność.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation; 2014, 46, 2
0208-5771
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of Material Flow During Incremental Forming Process on the Basis of Digital Material Representation Concept
Autorzy:
Szyndler, J.
Perzynski, K.
Madej, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/100177.pdf
Data publikacji:
2015
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
forging
numerical modelling
aluminum
Opis:
The main goal of the work is development of the multiscale numerical model of the incremental forming process for manufacturing integral elements applicable in the aerospace industry. Description of the proposed incremental forming concept based on division of large die into a series of small anvils pressed into the material by a moving roll is presented. A complex multi scale numerical model of mentioned incremental forging process based on the digital material representation (DMR) concept was developed and is also described within the paper. Finally, obtained results in the form of strain distribution are presented and compared with the outcome from conventional forging at the macro and micro scale, respectively.
Źródło:
Journal of Machine Engineering; 2015, 15, 1; 81-89
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Silicon-Doped Diamond-Like Carbon Coating on the Wear of Ionic Liquid Lubricated Friction Pairs
Wpływ powłoki diamentopodobnej domieszkowanej krzemem na zużycie węzłów tarcia smarowanych cieczą jonową
Autorzy:
Milewski, K.
Madej, M.
Kowalczyk, J.
Ozimina, D.
Powiązania:
https://bibliotekanauki.pl/articles/187857.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
DLC coating
100Cr6 steel
ionic liquid
friction
wear
powłoka diamentopodobna
stal 100Cr6
ciecz jonowa
tarcie
zużycie
Opis:
This article reports the results of the study of an a-C:H:Si coating doped with silicon and produced by chemical deposition (PACVD). The effect of the coating on the tribological behaviour of IL-lubricated friction pairs was evaluated. The properties of the 100Cr6 steel specimens with and without the coating were compared. Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis were used for imaging the morphology of the coating surfaces and cross-sections and for identifying the elements in the coating composition. The contact angle of the investigated surfaces was measured with an optical tensiometer. Friction tests were performed on a ball-on-disc tribometer under dry friction and when lubricated with trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl) amide ionic liquid. The geometrical structure of the surfaces before and after the tribological tests was measured using an optical profilometer. The ionic liquid used with the silicon-doped diamond-like coating under friction conditions reduced the coefficient of friction and wear. The results obtained from the tests and analysis allow for the conclusion that the use of DLC coatings a-C:H:Si lubricated with trihexyltetradecylphosphonium Bis(trifluoromethylsulfonyl) amide contributes towards the improvement of tribological properties of sliding surfaces under friction.
Artykuł poświęcony jest badaniom powłoki diamentopodobnej domieszkowanej krzemem typu a-C:H:Si uzyskanej w procesie chemicznego osadzania z fazy gazowej wspomaganego plazmą PACVD. Ocenie poddano wpływ powłoki na właściwości tribologiczne węzłów tarcia smarowanych cieczą jonową (Ionic Liquid) IL. W analizie porównano próbki ze stali 100Cr6 bez powłoki oraz pokryte powłoką diamentopodobną. Przy użyciu skaningowego mikroskopu elektronowego SEM (Scanning Electron Microscopy) wyposażonego w mikroanalizator rentgenowski EDS (X-ray Energy Dispersive Spectroscopy), zobrazowano morfologię powierzchni powłok, ich przekroje poprzeczne oraz dokonano identyfikacji pierwiastków wchodzących w skład powłoki. Wykonano również pomiary kąta zwilżania badanych powierzchni na optycznym tensjometrze. Badania tarciowe przeprowadzono na tribotesterze pracującym w skojarzeniu trącym kula–tarcza w warunkach tarcia technicznie suchego oraz z zastosowaniem smarowania cieczą jonową triheksyltetradecylphosphonium bis(triffluoromethylsulfonyl) amide. Charakterystykę struktury geometrycznej próbek przed oraz po badaniach tribologicznych przeprowadzono na profilometrze optycznym. Wyniki badań wskazały, że użyta ciecz jonowa w skojarzeniu trącym z powłoką diamentopodobną domieszkowaną krzemem wpłynęła na zmniejszenie współczynnika tarcia oraz zużycia. Otrzymane wyniki wskazują, że zastosowanie powłok diamentopodobnych typu a-C:H:Si smarowanych triheksyltetradecylphosphonium bis(triffluoromethylsulfonyl) amidem sprzyja poprawie właściwości tribologicznych węzłów tarcia w ruchu ślizgowym.
Źródło:
Tribologia; 2018, 282, 6; 97-106
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Properties of a Tribological System with a Diamond-Like Carbon Coating Lubricated with Environmentally Friendly Cutting Fluid
Właściwości systemów tribologicznych z powłokami diamentopodobnymi smarowanymi wybranymi proekologicznymi cieczami
Autorzy:
Kowalczyk, J.
Milewski, K.
Madej, M.
Ozimina, D.
Powiązania:
https://bibliotekanauki.pl/articles/190082.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
non-toxic cutting fluid
a-C:H:Si coating
100Cr6 steel
friction
wear
nietoksyczne chłodziwo
powłoka a-C:H:Si
stal 100Cr6
tarcie
zużycie
Opis:
This article presents experimental results obtained for an a-C:H:Si coating deposited on a 100Cr6 steel disc in sliding contact with a 100Cr6 steel ball in the presence of zinc aspartate-based cutting fluid. The study involved scanning electron microscopic examinations, contact angle measurements, tribological tests, and surface texture analysis. The experimental data suggest that the tribological properties of the diamond-like carbon (DLC) coating are satisfactory and that the non-toxic cutting fluid is well-suited to replace conventional fuels, which are toxic.
Przedstawiono wyniki badań tribologicznych powłoki a-C:H:Si naniesionej na stali 100Cr6. Badania te przeprowadzono na testerze T-01 M pracującym w skojarzeniu trącym kula–tarcza w ruchu ślizgowym. Testy zrealizowano w warunkach tarcia technicznie suchego i ze smarowaniem chłodziwem zawierającym asparginian cynku oraz konwencjonalnym chłodziwem na bazie oleju mineralnego. Ponadto wykonano badania identyfikacji pierwiastków wchodzących w skład powłoki a-C:H:Si, pomiar kąta zwilżania oraz analizę struktury geometrycznej powierzchni tarcz przed oraz po testach tribologicznych. Zastosowane w badaniach nietoksyczne chłodziwo wpłynęło na zmniejszenie zużycia liniowego, co bezpośrednio wpłynęło na mniejsze ślady wytarcia. Powłoka a-C:H:Si charakteryzowała się zadowalającymi właściwościami tribologicznymi.
Źródło:
Tribologia; 2018, 281, 5; 19-26
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Investigation of the Influence of Pulsed Laser Deposited Tin Thin Film Morphology on Deformation Inhomogeneities
Autorzy:
Perzyński, K.
Zych, D.
Sitko, M.
Madej, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/353619.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thin films
pulsed laser deposition
digital material representation
homogenization
finite element method
Opis:
In vestigation of influence of TiN thin film morphology on deformation inhomogeneities is an overall subject of the research. Numerical modelling approach that was selected for the study is based on the digital material representation concept, which gives an opportunity to directly replicate columnar microstructure morphology of an investigated thin film. Particular attention in this paper is put on the discussion of the influence of cellular automata neighbourhood on thin-film digital morphologies and their further deformation behaviour. Additionally, an evaluation of representativeness aspects of the digital models, in particular, the analysis of the influence of a number of columns, their dimensions and variations in their properties on the material behaviour during compression tests is also presented. The non-periodic boundary conditions are assumed during the investigation. Obtained data in the form of equivalent stress distributions as well as homogenized stress-strain curves from analyzed case studies are presented and discussed within the paper.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 2; 713-720
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
RCAFE Based Numerical Model of Dynamic Recrystallization
Autorzy:
Legwand, A.
Sitko, M.
Perzyński, K.
Madej, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/100012.pdf
Data publikacji:
2016
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
cellular automata
RCAFE
recrystallization
Opis:
The main goal of the paper is dedicated to proper arrangement of the Finite Element (FE) and Random Cellular Automata (RCA) methods in order to develop numerical model of dynamic recrystallization (DRX) and therefore to simulate microstructure morphology changes during plastic deformation at elevated temperatures. In the approach, Finite Element solver provides information on equivalent stress and strain fields after subsequent time steps. Then these data are transferred to RCA model, which is responsible for evaluation of corresponding microstructure morphology evolution and dislocation density changes. Finally, information from the CA part is send back to the FE solver as an input for the next time step. As a result, a fully coupled RCAFE model to simulate progress of DRX is established. The present paper is directly focused on development of algorithms and methods to transfer input/output data between both FE and RCA models. The developed communication protocol is based on the Abaqus VUMAT subroutine. Examples of obtained results from the developed model are also presented to highlight its potential.
Źródło:
Journal of Machine Engineering; 2016, 16, 2; 52-60
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical modelling of innovative manufacturing processes with induced strain path changes
Autorzy:
Muszka, K.
Madej, Ł.
Graca, P.
Majta, J.
Powiązania:
https://bibliotekanauki.pl/articles/100123.pdf
Data publikacji:
2013
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
strain path
accumulative angular drawing
FE modelling
Opis:
A review of various bulk metal forming processes that take into account influence of strain path changes on material flow is presented in this paper. Particular attention is put on computer aided design of innovative angular accumulative drawing (AAD) operation. Research in the area of development of metal forming processes taken advantage of strain path phenomena is conducted in many scientific laboratories as the strain patch change effect influences many crucial properties of the deformed material. As a result it provides a possibility of forming materials, which are e.g. difficult to form in a conventional manner. Advantages and limitations of the AAD process are summarized and presented in this work. Difficulties in development of the complex rheological model that takes in to account strain path changes in the deformed material are also presented and discussed.
Źródło:
Journal of Machine Engineering; 2013, 13, 2; 59-68
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the stress concentration in the nanomultilayer coatings based on digital representation of the structure
Numeryczna analiza koncentracji naprężeń w wielowarstwowych nanopowłokach na bazie cyfrowej reprezentacji materiału
Autorzy:
Perzyński, K.
Major, Ł.
Madej, Ł.
Pietrzyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/351065.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
automaty komórkowe (CA)
TEM
nanomateriał
XFEM
cellular automata (CA)
layers depositions
nanomaterials
Opis:
Investigation of the stress concentration in the nanomultilayer materials under exploitation conditions is the main objective of the work. During loading a failure can initiate and propagate, which have important impact on material strength and reliability. This is of importance when materials for biological applications are considered. Special features of the investigated material, including irregular shape of the boundaries and columnar structure of these layers lead to growth of local stresses in the material and may be responsible for mentioned instabilities. To capture this behavior during numerical modeling an innovative solutions are required. Authors propose numerical simulation, which combines algorithms of the deposition process for realistic digital material representation of coatings and finite element (FE) approach for modeling of material behavior under loading. Algorithm of the deposition process is implemented using the cellular automata (CA) approach. Based on the developed model, a simple plastometric compression tests are simulated to analyze stress distribution in the material and possibility of failure initiation. These results are compared qualitatively with experimental data, including ball-on-test and transmission electron microscope (TEM) observation. Obtained results are the basis for development of a numerical model for fracture propagation with adopted extended finite element method (XFEM).
Głównym celem pracy jest zaproponowanie podejścia numerycznego umożliwiającego analizę koncentracji naprężeń w materiałach o strukturze nanowarstwowej przeznaczonych dla bioinżynierii. Jest to szczególnie istotne w przypadku prowadzenia analizy zachowania się materiałów w warunkach eksploatacji ponieważ umożliwia zlokalizowanie miejsc szczególnie narażonych na uszkodzenia. Do przeprowadzenia szczegółowej analizy numerycznej konieczne jest uwzględnienie typowych cech nanowarstwowego materiału np. nieregularnego kształtu granicy pomiędzy warstwami. W tym celu Autorzy zastosowali model MES sprzężony z jawną reprezentacją mikrostruktury i automatami komórkowym (CA). Model na bazie CA uwzględnia wspomniane specyficzne cechy analizowanych materiałów. W pracy przedstawiono algorytm generowania cyfrowej reprezentacji nanowarstw oraz wyniki symulacji z wykorzystaniem opracowanego modelu numerycznego dla warstw bez uwzględnienia chropowatości granicy międzywarstwowej, jak i z jej uwzględnieniem. Uzyskane wyniki w formie rozkładów naprężeń stały się podstawą do opracowania modelu procesu pękania w analizowanych materiałach z wykorzystaniem metody eXtended Finite Element Method (XFEM). Przykłady uzyskanych wyników również zamieszczono w niniejszej pracy.
Źródło:
Archives of Metallurgy and Materials; 2011, 56, 2; 393-399
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the properties of diamond-like carbon coatings lubricated with ionic liquids
Ocena właściwości powłok diamentopodobnych smarowanych cieczami jonowymi
Autorzy:
Milewski, K.
Madej, M.
Niemczewska-Wójcik, M.
Ozimina, D.
Powiązania:
https://bibliotekanauki.pl/articles/189400.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
diamond-like carbon (DLC) coating
ionic liquid
friction coefficient
powłoka diamentopodobna
ciecz jonowa
współczynnik tarcia
Opis:
The purpose of the study was to evaluate the properties of DLC coatings with ionic liquids used as lubricants. The type a-C: H DLC coatings were deposited onto the 100Cr6 steel substrate by PVD. The surface topography of the DLC coatings was studied with a Bruker's Dimension Icon® Atomic Force Microscope (AFM), and surface morphology testing, cross section and chemical composition analyses were performed using the Jeol JSM-7100F scanning electron microscope, equipped with an EDS microanalyzer. Surface geometry measurements prior to and after tribological tests were performed on a Taylor Hobson's Talysurf CCI contactless optical profilometer. The tribological tests were carried out on an Anton Paar TRB tribotester under technically dry and lubricated friction with an ionic liquid, 1-Butyl-3-methylimidazolium tetrafluoroborate. The results show that DLC coatings and ionic liquids can significantly reduce resistance to motion.
Celem przeprowadzonych badań była ocena właściwości powłok diamentopodobnych DLC smarowanych cieczami jonowymi. Powłoki diamentopodobne typu a-C:H naniesione zostały na stal 100Cr6 za pomocą metody PVD. Wykonano badania topografii powierzchni powłok DLC na mikroskopie sił atomowych AFM – Dimension Icon – Brucker oraz badania morfologii powierzchni, przekrojów poprzecznych oraz analizy składu chemicznego przy użyciu elektronowego mikroskopu skaningowego Jeol JSM –7100F, wyposażonego w mikroanalizator EDS. Pomiary struktury geometrycznej powierzchni przed i po testach tribologicznych wykonano na bezstykowym profilometrze optycznym Talysurf CCI Firmy Taylor Hobson. Testy tribologiczne przeprowadzono na tribotesterze Anton Paar TRB w warunkach tarcia technicznie suchego i tarcia ze smarowaniem cieczą jonową – tetrafluoroboranem 1-butylo-3-metyloimidazoliowym. Przedstawione wyniki badań wykazały, że zastosowanie powłok DLC oraz cieczy jonowej znacznie obniża opory ruchu.
Źródło:
Tribologia; 2017, 275, 5; 37-45
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Evaluation of Gear Ring Behavior During Various Cooling Conditions
Autorzy:
Perzyński, K.
Madej, Ł.
Szajding, A.
Raga, K.
Kubiak, K.
Niechajowicz, A.
Jaskiewicz, K.
Gronostajski, Z.
Pietrzyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/99546.pdf
Data publikacji:
2016
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
bainitic transformation
martensitic transformation
finite element analysis
APDL
Opis:
The phase transformation model incorporated via the user subroutines to the commercial finite element software to accurately predict changes occurring during cooling of metallic components is presented in the paper. The cooling process of steel rings used in airplanes was selected as a case study. Particular attention was put on heterogeneities occurring in temperature field, which influence phase transformations and eventually residual stresses. Developed model was used in the present work to evaluate influence of different cooling conditions on ring behaviour.
Źródło:
Journal of Machine Engineering; 2016, 16, 2; 18-26
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dietary intakes of iron and zinc assessed in a selected group of the elderly: are they adequate?
Autorzy:
Madej, D.
Borowska, K.
Bylinowska, J.
Szybalska, A.
Pietruszka, B.
Powiązania:
https://bibliotekanauki.pl/articles/873701.pdf
Data publikacji:
2013
Wydawca:
Narodowy Instytut Zdrowia Publicznego. Państwowy Zakład Higieny
Tematy:
dietary intake
iron
zinc
elderly
PolSenior project
human nutrition
Opis:
Background. Many studies demonstrate that the elderly consume a nutritionally inadequate diet that includes deficiencies in macro- and microelements; iron and zinc being significant examples of the former. Objectives. To assess the adequacy of dietary iron and zinc intakes in the elderly. Material and methods. The study was conducted on n=102 elderly persons, participating in the PolSenior Project, aged over 65, of which 44 were women and 58 men. Consumption data were collected by using 3 day dietary record from which a usual intakes of energy, macroelements (iron and zinc) were calculated. The Estimated Average Requirement (EAR) cut point and z-scores methods were used to determine probabilities of whether iron and zinc uptake was adequate per subject. Results. By using the EAR cut-point method it was stated that iron intake was inadequate for 5% of respondents, whereas 44% showed deficits in zinc (34% women and 52% men). The z-scores demonstrated that 3% of subjects had high probabilities of deficiencies in iron and 52% in zinc. Indeed, very high zinc deficiencies were observed in 20% of cases. Conclusions. The insufficient energy intake observed among respondents contributes to a high risk of zinc deficiency necessary to ensure health in the elderly. In most cases, the low risk of iron deficiency shows that there is no need to increase this nutrient uptake in the examined group of elderly. The study highlights the need for educating the elderly, especially focused on improving zinc intake without changing iron intake. It can be done through appropriate dietary choices so as to include products such as dairy products, wheat bran, pumpkin and sunflower seeds, beans, lentils and nuts.
Wprowadzenie. Wyniki wielu badań wskazują, że dieta osób starszych jest często nieadekwatna do ich zapotrzebowania. Istotne znaczenie ma odpowiednie spożycie makro- i mikroelementów w tym, m.in. żelaza i cynku. Cel. Celem niniejszych badań była ocena spożycia żelaza i cynku przez osoby starsze. Materiał i metody. Badania przeprowadzono wśród 102 osób w wieku ponad 65 lat (44 kobiety, 58 mężczyzn), uczestników projektu PolSenior. Dane o spożyciu zostały zebrane metodą 3-dniowego bieżącego notowania, na podstawie których obliczono wartość energetyczną racji pokarmowych oraz zwyczajowe spożycie makroskładników, żelaza i cynku. Ocenę adekwatności spożycia żelaza i cynku przeprowadzono metodą punktu odcięcia (Estimated Average Requirement - EAR cut-point) oraz określając prawdopodobieństwo nieprawidłowego spożycia żelaza i cynku na poziomie indywidualnym z wykorzystaniem współczynnika z-score. Wynik. Ocena adekwatności spożycia badanych pierwiastków metodą EAR cut-point wykazała w przypadku żelaza, iż dla 5% badanych zwyczajowa dieta nie pozwoliła na realizację normy na żelazo na poziomie średniego zapotrzebowania w grupie (EAR), natomiast w przypadku cynku aż u 44% badanych (34% wśród kobiet i 52% wśród mężczyzn). Oceniając prawdopodobieństwo niedostatecznego spożycia wykazano, że duże prawdopodobieństwo niedoborów żelaza wystąpiło jedynie u 3% osób, natomiast w przypadku cynku u około 52% osób, przy czy bardzo wysokie ryzyko dotyczyło 20% badanej populacji. Wnioski. Zbyt niska wartość energetyczna diet badanych osób powyżej 65 roku życia stwarza ryzyko wystąpienia niedoborów cynku w diecie osób starszych. Ze względu na niewielkie ryzyko wystąpienia niedoboru żelaza w diecie osób starszych nie ma potrzeby poprawy spożycia tego składnika wśród badanych osób. W celu zwiększenia pobrania cynku przez te osoby bez zmiany pobrania żelaza zaleca się większe spożycie produktów, takich jak mleko i przetwory mleczne, otręby pszenne, nasiona dyni i słonecznika, fasola, soczewica czy orzechy.
Źródło:
Roczniki Państwowego Zakładu Higieny; 2013, 64, 2
0035-7715
Pojawia się w:
Roczniki Państwowego Zakładu Higieny
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies