Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kogut, S" wg kryterium: Autor


Wyświetlanie 1-7 z 7
Tytuł:
Adsorptive properties of natural water surfactant films. Dead Vistula catchment water studies
Autorzy:
Pogorzelski, S.J.
Kogut, A.D.
Powiązania:
https://bibliotekanauki.pl/articles/48236.pdf
Data publikacji:
2003
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
temporal variability
natural water
inland water
natural film
surface isotherm
scaling procedure
spatial variability
surfactant
adsorption kinetics
Vistula River
catchment area
Opis:
The paper contains the results of natural film experiments carried out on inland waters in the Dead Vistula (Martwa Wisła) catchment area during 1999–2002 using the integrated Langmuir trough-Wilhelmy plate system,w hich ‘cuts out’ an undisturbed film-covered area without any physicochemical sample processing. The static film parameters result from the generalized scaling procedures applied to the surface pressure-area isotherms. They appear to correspond well to observations of the film composition (Alim, MW, Eisoth),film solubility and the miscibility of its components (via R, ΔSc and y factors),and surface concentration (πeq, Γeq). A novel approach is presented for the adsorption dynamics on the basis of the mixed kinetic-diffusion model and analyses of the dynamic surface pressure plots,whic h leads to the determination of the effective relative diffusion coefficient Deff/D and activation energy barrier Ea/RT . There is reason to believe that certain classes of film-forming components or ‘end-members’ may dominate the static and dynamic surface properties. Some of these substances can be used as source-specific surface-active biomarkers to trace temporal and spatial changes due to environmental factors or the production of biological matter. The concept was tested for the Dead Vistula river and its tributaries. The results demonstrate that natural films are a complex mixture of biopolymeric molecules covering a wide range of solubilities,sur face activities and molecular masses with an apparent structural film architecture. Such studies could lead to the development of film structure parameters – indicators of ecosystem quality and the state of the environment.
Źródło:
Oceanologia; 2003, 45, 3
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetics of marine surfactant adsorption at an air-water interface. Baltic Sea studies
Autorzy:
Pogorzelski, S.J.
Kogut, A.D.
Powiązania:
https://bibliotekanauki.pl/articles/48394.pdf
Data publikacji:
2001
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
coastal water
water interface
surface adsorption
marine film
kinetics
Baltic Sea
adsorption barrier
adsorption
Opis:
The paper contains the results of studies of natural surface film adsorption kinetics carried out in inland waters and in shallow offshore regions of the Baltic Sea during 2000–01 under calm sea conditions. The novel approach presented here for the adsorption dynamics is based on the mixed kinetic-diffusion model and analyses of the surface pressure-time plots at short (t → 0) and long (t→∞) adsorption time intervals. Values of the effective relative diffusion coefficient Deff/D (= 0.008 − 0.607) and energy barrier for adsorption Ea/RT (= 0.49 − 7.10) agree well with the data reported for model non-ionic surfactant solutions of pre-cmc concentrations. Wind speed is one of the factors affecting the adsorption barrier via the increased surface pressure of the natural film exposed to wind shear stress (∼ U10 2),a nd enters the relation Ea/RT = 1.70U10 1/3.
Źródło:
Oceanologia; 2001, 43, 4
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Static and dynamic properties of surfactant films on natural waters
Autorzy:
Pogorzelski, S.J.
Kogut, A.D.
Powiązania:
https://bibliotekanauki.pl/articles/49159.pdf
Data publikacji:
2001
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
natural water
Mediterranean Sea
dynamic property
water condition
surfactant
marine film
Baltic Sea
viscoelasticity
static property
Opis:
The paper contains the results of natural surface film surface pressure – area experiments carried out in inland waters and shallow offshore regions of the Baltic and Mediterranean Seas during 1990–99 under calm water conditions using the Langmuir trough – Wilhelmy filter paper plate system, which ‘cuts out’ an undisturbed film-covered sea area without any initial physico-chemical sample processing. The limiting specific area Alim (268–3157 ˚A2/molecule−1) and mean molecular mass (0.65–9.7 kDa) of microlayer surfactants were determined from the 2D virial equation of state applied to the isotherms. Film structure signatures were derived from π − A isotherm hysteresis and application of the 2D polymer scaling theory. The stress-relaxation measurements revealed a two-step relaxation process at the interface with characteristic times τ1 (1.1–2.8) and τ2 (5.6–25.6) seconds suggesting the presence of diffusion-controlled and structural organization relaxation phenomena. The results demonstrate that natural films are a complex mixture of biomolecules covering a wide range of solubilities, surface activity and molecular mass with an apparent structural organization exhibiting a spatial and temporal variability.
Źródło:
Oceanologia; 2001, 43, 2
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sound transmission of sandwich beams with the dynamic vibration absorbers
Transmisja dźwięku poprzez płyty warstwowe z dynamicznymi absorberami drgań
Autorzy:
Diveyev, B.
Kernytskyy, I.
Kopytko, M.
Konyk, S.
Kogut, V.
Powiązania:
https://bibliotekanauki.pl/articles/886602.pdf
Data publikacji:
2015
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
sound transmission
beam
dynamic vibration absorber
noise
vibration
industrial machine
Źródło:
Scientific Review Engineering and Environmental Sciences; 2015, 24, 2[68]
1732-9353
Pojawia się w:
Scientific Review Engineering and Environmental Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of foam-breaking measures after removing liquid contamination from wells and flowlines by using surface-active substances
Autorzy:
Volovetskyi, V. B.
Doroshenko, Ya. V.
Stetsiuk, S. M.
Matkivskyi, S. V.
Shchyrba, O. M.
Femiak, Y. M.
Kogut, G. M.
Powiązania:
https://bibliotekanauki.pl/articles/2201061.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
well
gas
flowline
liquid removal
gas-fluid flow
foam breaking
odwiert
gaz
linia przepływu
usuwanie cieczy
przepływ gaz-ciecz
Opis:
Purpose The purpose is to consider the complications that arise during the operation of gas condensate wells, in particular, the accumulation of liquid contamination. Development of new approaches to improve the efficiency of the separation equipment performance of gas gathering and treatment systems when a multiphase flow enters. Development of a foam breaking method in a gas-liquid flow after removal of liquid contaminants from wells and flowlines using surfactants. Design/methodology/approach An analysis was made of the complications that may arise when removing liquid contaminants from wells and flowlines using surfactants. Measures have been developed that will make it possible to timely prevent the ingress of foam into the separation equipment of gas gathering and treatment systems. Using computational fluid dynamics (CFD) modelling, an effective foam-breaking device was developed by supplying stable hydrocarbon condensate. Findings A method to minimize the negative impact of foam on the operation of separation equipment after fluid removal from wells and gas condensate field flowlines using a surfactant solution was elaborated. A method for its breaking was proposed to prevent the flow of foam into the gas processing unit. This method foresees the application of the technological scheme layout for supplying a stable hydrocarbon condensate to a gas-liquid flow entering the separators of the first of separation, both the main line and the measuring line. CFD modelling was used to study the process of foam breaking by feeding hydrocarbon condensate into it. The influence of the hydrocarbon condensate supplying method on gas-dynamic processes (distribution of pressure, velocity, volumetric particles of phases), and the efficiency of foam breaking was estimated. It was established that the supply of hydrocarbon condensate from one branch pipe to the pipeline through which the foam moved did not ensure its complete breaking. To increase the efficiency of foam breaking, a device with designed four nozzles for supplying hydrocarbon condensate was developed. CFD modelling made it possible to substantiate that in this case, a pressure reduction zone appeared at the place of condensate supply. Because of a sharp change in pressure, a strong improvement in the effect of foam breaking occurred. The understanding of the regularities of foam breaking processes by hydrocarbon condensate was obtained, and the design of a device for the complete foam breaking was developed. Research limitations/implications The obtained results of laboratory studies have shown that a sharp decrease in the stability of the foam occurs under the condition of an increase in the volume of stable hydrocarbon condensate added to the studied model of mineralized formation water. Based on the results of CFD modeling, a device for breaking foam by stable hydrocarbon condensate has been worked out, the effectiveness of which will be confirmed experimentally and in field conditions. Practical implications The results of the performed laboratory studies and CFD modelling allow a more reasonable approach to using various available methods and measures to prevent the ingress of foam with a gas-liquid flow into the separation equipment of gas gathering and treatment systems. This approach makes it possible to develop new effective ways and measures to prevent this complication. Originality/value Based on CFD modelling, it was found that when a stable hydrocarbon condensate is supplied into a gas-liquid flow, foam breaks. A method for breaking foam in a gas-liquid flow has been developed, which is original and can be introduced in practice.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2022, 114, 2; 67--80
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nanostructure features, phase relationships and thermoelectric properties of melt-spun and spark-plasma-sintered skutterudites
Autorzy:
Kogut, Iu.
Nichkalo, S.
Ohorodniichuk, V.
Dauscher, A.
Candolfi, C.
Masschelein, P.
Jacquot, A.
Lenoir, B.
Powiązania:
https://bibliotekanauki.pl/articles/1052685.pdf
Data publikacji:
2018-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
72.15.Eb
72.15.Jf
72.20.Pa
66.70.Df
81.20.Ev
81.16.-c
81.40.Gh
Opis:
Reduction of thermal conductivity remains a main approach relevant to enhancement of figure-of-merit of most thermoelectric materials. Melt spinning combined with spark plasma sintering appears to be a vital route towards fine-grain skutterudites with improved thermoelectric performance. However, upon high-temperature processing the Fe_{4-x}Co_{x}Sb_{12}-based skutterudites are prone to decompose into multiple phases, which deteriorate their thermoelectric performance. In this study we addressed the effects of combined melt spinning and spark plasma sintering on the phase composition and microstructural properties of filled Fe_{4-x}Co_{x}Sb_{12} as well as their influence on thermoelectric characteristics of these compounds. The crystallites of filled Fe_{4-x}Co_{x}Sb_{12} were effectively reduced to sizes below 100 nm upon melt spinning, but also severe decomposition with weakly preserved nominal phase was observed. Spark plasma sintering of melt spun skutterudites resulted in even further reduction of crystallites. Upon short annealing and sintering the n-type materials easily restored into single-phase filled CoSb₃ with nanoscale features preserved, while secondary phases of FeSb₂ and Sb remained in p-type compounds. Relatively high figure-of-merit ZT_{max} of 0.9 at T ≈ 400°C has been gained in nanostructured Yb_{x}Co₄Sb_{12}, however, no significant reduction of thermal conductivity was observed. Abundant impurities in p-type filled Fe_{4-x}Co_{x}Sb_{12} led to drastic drop in their ZT, which even further degraded upon thermal cycling.
Źródło:
Acta Physica Polonica A; 2018, 133, 4; 879-883
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Production of ethanol from wheat straw
Autorzy:
Smuga-Kogut, M.
Wnuk, A. D.
Zgórska, K.
Kubiak, M. S.
Wojdalski, J.
Kupczyk, A.
Szlachta, J
Luberański, A.
Powiązania:
https://bibliotekanauki.pl/articles/778125.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
wheat straw
chemical processing
enzymatic hydrolysis
reducing sugars
ethanol
Opis:
This study proposes a method for the production of ethanol from wheat straw lignocellulose where the raw material is chemically processed before hydrolysis and fermentation. The usefulness of wheat straw delignification was evaluated with the use of a 4:1 mixture of 95% ethanol and 65% HNO3 (V). Chemically processed lignocellulose was subjected to enzymatic hydrolysis to produce reducing sugars, which were converted to ethanol in the process of alcoholic fermentation. Chemical processing damages the molecular structure of wheat straw, thus improving ethanol yield. The removal of lignin from straw improves fermentation by eliminating lignin’s negative influence on the growth and viability of yeast cells. Straw pretreatment facilitates enzymatic hydrolysis by increasing the content of reducing sugars and ethanol per g in comparison with untreated wheat straw.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 3; 89-94
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies