Autor: Rybak, W. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Numerical and experimental research on the dynamic loads in military vehicles
Autorzy:: Rybak, P.
Borkowski, W.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/949498.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: military vehicle
armoured vehicle
load
research
modelling
experiment
Opis:: The work presents the fragments of research on the dynamic loads acting on selected military vehicles. Designing new armoured vehicles or introducing modifications is preceded by model tests carried out under various conditions, analysing the effect of dynamic loads which may result during the use of the vehicle, e.g. due to the roughness of the road, firing, IED explosions or the vehicle being hit by a shell. The main purpose of conducting model research and verifying their findings in experimental research is to improve the effectiveness and safety of operation of systems and installations of military vehicles, increase the dynamics of the movement, improve the protection and ensure that the crew is not killed. Among the used models of military vehicles, discrete models are applied, formulated in the adjusted Lagrange description, as well as the models based on the fine element method for highly nonlinear problems and forces acting for a very short time. Due to the unique selection of military equipment, the methods of calculation and analysis of model research (simulations) and experimental research presented in the work are considered qualitative rather than quantitative.
Źródło:: Journal of KONES; 2016, 23, 4; 435-441
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Testing the results of a passenger vehicle collision with a rigid barrier
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/245925.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road safety barrier
crash tests
computer simulation
LS-DYNA
Opis:: High accident index in Poland, including one of the highest death rates in EU, forces undertaking the intense works in order to improve traffic safety. Published road accident statistics indicate that the most dangerous accidents include a vehicle collision with a tree, post or other road object. The road safety barriers make the road infrastructure elements that can signiflcantly protect against that type of accidents. The work presents basie tasks and requirements imposed on the barriers. Problems related to a proper selection of the barriers have been also highlighted. The tools facilitating the barrier design include numerical modelling. The modelling has been done by means of the LS-DYNA software, using the finite element method. A general structure and a developed barrier model as well as vehicle model have been presented. The conditions of the numerical tests have been also specifled. The work presents the results of influence of car impact angle with a rigid safety barrier. Presented results refer to a car o f mas s of 900 kg, making a bas is for the tests of the limiting systems for several limiting levels: including normal limit N2 (according to EN 1317-2). Compared to standard requirements, the scope of numerical tests has been extended by other car impact angle values. The work presents vehicle trajectories and deformations of their bodies. It also includes examples of velocities and acceleration courses and acceleration severity indexes (ASI) calculated on their basis. Obtained results indicate that the barrier location angle has a high influence on the safety level ofthe car passengers as well as on the car motion trajectory after collision
Źródło:: Journal of KONES; 2010, 17, 1; 51-57
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Simulation tests on shaping the working width of the concrete protective systems
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/247035.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Opis:: The work addresses the road traffic safety issue related to the use of road safety barriers. It describes the tasks that have to be fulfilled by the protective system. It presents the barrier assessment conditions according to the requirements ofthe existing standards as far as the working barrier width is concerned. The objective of the work is to evaluate the possibilities of shaping the working width of the concrete protective systems. They have been executed on the basis of a concrete barrier equipped with a prototype joint linking individual barrier segments. It allowed defining the maximum angle of relative angle displacement of the adjacent segments. The model tests have been performed with a 900kg passenger car which allows performing TB11 test according to EN1317-2 standard The modelling has been performed with LS-DYNA software, which uses the finite element method. The work presents the numerical test results, vehicle motion trajectory and barrier displacement. It also includes examples of speed and acceleration courses of selected vehicle elements and the ASI index calculated on that basis which is used to assess the danger level for the vehicle passengers. Obtained results indicate that there is a possibility of shaping the dynamic bending and the working barrier width depending on assumed joint (boundary angle) parameters. Further areas of the analysis have been also defined.
Źródło:: Journal of KONES; 2010, 17, 2; 43-50
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Experimental crash tests involving passenger cars and the prototype concrete protective barrier
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/247037.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: experimental tests
test track
concrete protective barrier
crash test
experimental verification
Opis:: The work describes the experimental test methodology and results obtained during the experimental crash tests involving passenger cars and the prototype concrete protective barrier, which was built according to the original design prepared by the authors of this article. The crash tests involving a vehicle and the protective barrier cover the experiment results in three basic areas: severity ofthe collision impact on vehicle passengers, the impact on a vehicle and deformation of the road protective system. Applied testing procedures meet the requirements of the national standards, that make the equivalents of the European standards EN-1317-1:1998, EN-1317-2:1998, EN-J 317-3:2000. The tests have been performed for selected crash criteria (TB11 and TB32), for a normal restrain level (N2), using three passenger's cars (Dodge Neon and 2 units of Suzuki Swift). Applied testing procedures meet the requirements of the national standards [1-5]. The work presents examples of experimental test results in three basie areas: intensity of the crash impact on the vehicle passengers, the impact on a vehicle and deformation of the road protective system. The test results have been presented in a form of courses of speeds and accelerations along the vehicle body axes x, y, z. Acceleration severity index (ASI), theoretical head impact velocity (THIV), post-impact head delay (PHD), vehicle cabin deformation index (VCDI) and deformation levels of the road protective system (W) have been also defined.
Źródło:: Journal of KONES; 2010, 17, 2; 35-42
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Numerical simulation of the standard TB11 and TB32 tests for a concrete safety barrier
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/247654.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road safety barrier
crash tests
computer simulation
LS-DYNA
Opis:: The work presents the traffic safety issue related to a use of the road protective barriers. It describes a purpose and tasks that should be fulfilled by the safety system. Conditions of crash tests and their evaluation according to the requirements of the existing standard documents are also presented. The purpose of the work was to evaluate the influence of applied barrier type on the car collision process. A barrier composed of the segments that can move on the ground due to the impact force and a barrier fixed to the road surface were assumed for the model tests. The modelling was carried out by means of the LS-DYNA sofrware, using the finite element method. The tests were performed for two types of cars, mass of 900 kg and 1500 kg. The work includes the numerical test results, deformations of car bodies and barrier displacement. Examples of velocities and acceleration courses of selected vehicle elements and the ASI index, calculated on their basis, used for evaluation of the passenger danger level were also presented. Obtained results indicate a significant influence of the barrier installation method (joint with the road) on the collision process course and dynamic loads affecting the car passengers. They also indicate directions of safety improvement.
Źródło:: Journal of KONES; 2010, 17, 4; 63-71
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Studies on possibilities of increasing the impact resistance of KTO Rosomak
Autorzy:: Borkowski, W.
Rybak, P.
Hryciów, Z.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/241711.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: wheeled armoured carrier
loads
mine explosion
Opis:: Military vehicles are mostly designed in order to provide effective execution of tasks in regions of expected actions and operation conditions. During execution of projects, resulting from participation in peace making and stabilization missions, military vehicles are subject to the impact of various mines and improvised explosives. In many cases, the explosive material mass included in the explosive charges affecting the vehicles significantly exceeds the values specified in standards defining the required protection levels assumed at the design stage. The above determines the search for additional shields or energy-absorbing elements reducing the effects of such influence. Information concerning design solutions is usually classified or very limited. Majority of companies dealing with that issue provides information concerning the scope of their business, highlighting the military area thus high efficiency of their protective solutions, possibly presenting a general outline of a particular solution. This paper presents selected results of analyses and studies being carried out and obtained results of solutions to problems included in the study tasks covering a considered subject. Proposed solutions of protective shields against mines and IED for the KTO Rosomak are presented.
Źródło:: Journal of KONES; 2012, 19, 4; 101-110
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Prototype articulated joint in connections of the concrete protective barrier
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/244656.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
road safety
concrete protective barrier
crash test
articulated joint
Opis:: The work describes methodology of selection of a prototype articulated joint used to connect the segments of the concrete protection barrier. The barrier and the joint have been made according to the original project of the authors of this paper. Dimensions of the component elements of the joint were defined on the basis of numerical calculations in LS-DYNA system, using finite element method. They also allowed to identify places sensible to damage. Based on the project, the experimental tests have been performed for the joint strength to stretching. The tests performed on the resistance machine showed improper technology and poor quality of welds joining individual elements, particularly the bolt with connecting steel. Results of these tests made the basis for introducing the changes to the project. Repeated tests confirmed their rightness. The final evaluation of quality and usefulness of the prototype articulated joint in the connections of movable protection barrier were defined during the crash tests on the test track of the Certified Research Laboratory of the Research Institute for Roads and Bridges. The crash tests were performed for selected collision criteria (TB11 and TB32), normal restrain level (N2), using three passengers cars. Applied concrete barrier test procedures are in accordance with the requirements of national standards, that make the equivalents of the European standards.
Źródło:: Journal of KONES; 2011, 18, 1; 85-92
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Selection of elastic suspension elements for the special use vehicle
Autorzy:: Borkowski, W.
Michalowski, B.
Paplinski, K.
Rybak, P.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/242198.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: special vehicle
suspension
spring
elastic element
lateral tilt stabilizer
Opis:: The work analyzes the possibility of using a truck chassis in terms of installing a specific device. As part ofwork was selected the vehicle, identified the necessary geometric parameters and the mass allowing of modernization, with particular emphasis on the required structural changes in the front and rear suspension. To this were used, the developed two phase methodology of calculation of the metal elastic elements (springs) and mechanical lateral tilt stabilizers. Results of numerical calculations are presented in the form of recommendations to redesign of the front and rear suspension. However, in the front suspension should be made a new spring and a mechanical lateral tilt stabilizer, while rear spring suspension meets the requirements in terms of elastic characteristics (adequate the coefficient of rigidity) is requiredonly adjustment of the static deflection of the suspension for example by adjusting the radii of leaf of the spring. Because of the design solution of the driving rear axle (so called driving axle trolley) was not proposed mechanical lateral tilt stabilizer. Paper present diagram of the forces acting on a vehicle with special equipment, results of the calculation loads acting on the suspension components fitted to a lorry with a special device, results of the calculation loads acting on the base vehicle suspension components, the basic parameters of a lorry with special hull and performance graph of the front suspension leaf spring resilience.
Źródło:: Journal of KONES; 2009, 16, 3; 47-54
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Experimental researches of dynamic loads of armoured personnel carrier and its crew during collision with rigid obstacle and all - terrain vehicle
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Wiśniewski, A.
Powiązania:: https://bibliotekanauki.pl/articles/242892.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: armoured personnel carrier
dynamic load
dummy
crash test
passive safety
Opis:: The paper presents problems related to dynamic loads of armoured personnel carriers design as well as soldiers located inside them. During tactical operation, there is often the need for ramming other vehicles or terrain obstacles in order to provide road possibility. The lack in armoured vehicles, commonly used in cars crumple zones, will result in large values of accelerations. This can cause significant risk to the crews of vehicles. In order to assess the exposure of soldiers while overcoming terrain and engineering obstacles experimental studies were performed covering a carrier’s collision with a rigid barrier and ramming of all-terrain vehicle. In the paper the research conditions and used measurement equipment were described. A four-wheel SKOT personnel carrier and Tarpan Honker car, out of service, was used for the tests. The tests were carried out within the area of the Military Institute for Armoured and Automotive Technology in Sulejówek. During crash tests, anthropomorphic measurement equipment – Hybrid III 50th Male Dummy type – was used for recording the values of loads affecting the soldiers. The article presents some results of experimental studies. The values of the carrier’s body accelerations in driver’s and landing troop compartment were compared as well as dynamic loads of test dummies. The results obtained during vehicle ramming prove that these types of actions do not cause serious threats for the members of the carrier crew.
Źródło:: Journal of KONES; 2013, 20, 3; 71-78
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Analysis of the influence of concrete safety barrier segment length on road safety
Analiza wpływu długości segmentu betonowej bariery ochronnej na bezpieczeństwo ruchu drogowego
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Wiśniewski, A.
Powiązania:: https://bibliotekanauki.pl/articles/1364492.pdf
Data publikacji:: 2014
Wydawca:: Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:: passive safety
crash tests
concrete safety barrier
computer simulation
LS-DYNA
bezpieczeństwo bierne
testy zderzeniowe
betonowe bariery ochronne
symulacja komputerowa
Opis:: The paper presents problems related to road safety in terms of the development of the concrete barriers system, dispersing energy of car collision on the roads with high traffic and high accident risk. Particular attention was paid to barriers' basic parameters - weight and length of the segment. The main objective of the numeric researches was to assess the qualitative and quantitative effects of the car collision with a concrete road barrier in accordance with the standard EN 1317. To the model tests a 900 kg passenger car has been used which allowed to perform TB11 test according to EN 1317-2 standard (initial velocity - 100 km/h). Numerical studies were carried out for concrete segments lengths: 2, 4, 6, 8 m for two selected impact points. Detailed comparisons of simulation test results obtained for individual variants were made on the basis of the acceleration courses of selected car bodywork points, calculated indicators, the trajectory of vehicle movement after collision as well as on the basis of the behaviour of the concrete barriers.
Niniejsza praca stanowi rozwinięcie problematyki bezpieczeństwo ruchu drogowego w aspekcie opracowania systemu betonowych barier ochronnych, rozpraszających energią zderzenia samochodu na drogach o dużym natężeniu ruchu i wysokim zagrożeniu wypadkowym, ze szczególnym uwzględnieniem jej podstawowych parametrów konstrukcyjnych (masy i długości segmentu). Głównym celem przeprowadzonych badań numerycznych było dokonanie oceny jakościowej i ilościowej skutków zderzenia samochodu z betonową barierą drogową zgodnie z obowiązującą normą EN 1317. Obliczenia przeprowa-dzono w systemie LS - DYNA wykorzystującego metodę elementów skończonych. Pojazd badany o masie 900 kg poruszał się z prędkością początkową 100 km/h, a następnie uderzał w system barier. Badania numeryczne zrealizowano dla segmentów betonowych o długościach: 2, 4, 6, 8 m, dla dwóch wybranych punktów zderzenia. Szczegółowych porównań wyników badań symulacyjnych, otrzymanych dla poszczególnych wariantów obliczeniowych, dokonano na podstawie przebiegów czasowych przyspieszeń wybranych punktów nadwozia samochodu, obliczonych na ich podstawie wskaźników, trajektorii ruchu pojazdu po zderzeniu, a także na podstawie zachowania się betonowej bariery ochronnej.
Źródło:: Archiwum Motoryzacji; 2014, 63, 1; 25-34
1234-754X
2084-476X
Pojawia się w:: Archiwum Motoryzacji
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Obciążenia dynamiczne gąsienicowego wozu bojowego
Dynamic loads of tracked combat vehicle
Autorzy:: Borkowski, W.
Rybak, P.
Hryciów, Z.
Wysocki, J.
Michałowski, B.
Powiązania:: https://bibliotekanauki.pl/articles/210283.pdf
Data publikacji:: 2010
Wydawca:: Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:: budowa i eksploatacja maszyn
gąsienicowy wóz bojowy
obciążenia
structure and operation of machines
tracked combat vehicle
dynamic loads
Opis:: Wśród gąsienicowych wozów bojowych szczególnie wysokimi walorami wyróżniają się czołgi i wozy bojowe piechoty. Są one uniwersalnymi środkami walki, działającymi skutecznie zarówno w działaniach zaczepnych jak i w obronie, w różnych warunkach, stanowiąc podstawowy środek walki wojsk lądowych. O przydatności gąsienicowych wozów bojowych decydują ich główne cechy bojowe, do których zalicza się siłę ognia, opancerzenie i ruchliwość. Ruchliwość odzwierciedla zdolności dynamiczne i manewrowe. To od niej przede wszystkim zależy tempo działań bojowych, możliwość manewru wojskami oraz zdolności przekraczania różnych przeszkód, zarówno naturalnych jak i sztucznych. Właściwości dynamiczne wozów bojowych to głównie ich prędkości maksymalne i średnie w terenie oraz zdolność przyspieszania. Na ruchliwość duży wpływ ma silnik, układ napędowy i gąsienicowy układ jezdny. Aby zapewnić dużą ruchliwość, układ napędowy powinien charakteryzować się wysokim wskaźnikiem mocy jednostkowej, układ jezdny natomiast powinien stwarzać warunki płynnej jazdy oraz amortyzację wstrząsów i szarpnięć. Ruchliwość wozów bojowych ma istotny wpływ na żywotność czołgu oraz prawdopodobieństwo ich trafienia, jest elementem tzw. obrony czynnej. Wzrost ruchliwości bardzo ściśle wiąże się ze wzrostem obciążeń dynamicznych, które działają na kadłub pojazdu i jego załogę oraz wyposażenie wewnętrzne. W pracy podjęto próbę oceny wpływu niektórych parametrów na obciążenia dynamiczne gąsienicowego wozu bojowego, w oparciu o analizę stanu zagadnienia jak i badania własne.
Tanks and infantry fighting vehicles stand out with especially high advantages from among other tracked combat vehicles. They are universal combat means, operating effectively in offensive operations as well as in defence, in various weather conditions, providing the most essential combat weapons of the army. Usefulness of those vehicles is determined by their fire power, armour and mobility, which rank among the main combat features. Mobility represents dynamic and manoeuvre capabilities. On mobility first of all depends military action pace, possibility of troops movement and ability of clearing various, natural or artificial obstacles. Dynamic capabilities of combat vehicles include their peak and mean velocities in field as well as acceleration ability. Significant influence on mobility of the vehicles have the proper engine, power drive and suspension system. To provide suitable mobility of the vehicle, the power drive system should be characterized by high power ratio, whereas suspension system should ensure conditions of fluent motion and absorption of shocks and rattles while moving. Mobility of combat vehicles has real influence on their survival at battlefield and probability of avoiding the hit by enemy means. Increase in mobility is strictly connected with the increase in the dynamic loads, which affect the hull, equipment and the crew of the vehicle. In the paper, an attempt to estimate the influence of chosen parameters of the vehicle on its dynamical loads was undertaken. The analysis of professional literature, as well as the results of authors' own research were considered.
Źródło:: Biuletyn Wojskowej Akademii Technicznej; 2010, 59, 1; 333-345
1234-5865
Pojawia się w:: Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Influence of operation conditions on the wheeled armoured carrier characteristics
Autorzy:: Borkowski, W.
Rybak, P.
Hryciów, Z.
Wysocki, J.
Michałowski, B.
Powiązania:: https://bibliotekanauki.pl/articles/245920.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: wheeled armoured carrier
characteristics
traction features
loads
Opis:: Participation of Polish military contingent in peach and stabilization missions resulted in the need for new vehicles. Special vehicles - multiaxle ones of good protection abilities and high motion dynamics - have to be adjusted to operation in various climate and terrain conditions. The work presents operation conditions of the wheeled armoured carriers resulting from the execution of required tasks. Threats resulting from driving on unpaved roads and wilderness have been presented as well as their influence on the motion dynamics, technical condition of vehicle chassis, durability and reliability. It is particularly important for the passenger safety. A mathematical vehicle model, imitating special multiaxle vehicle, have been presented. Calculation abilities of original numerical software for the analysis of vehicle traction characteristics have been presented. Mechanical and hydromechanical drive vehicles can be analysed. Examples of calculation results, illustrated on the diagrams, have been also included. Influence of selected technical - structural parameters on a multiaxle vehicle has been shown. Their influence on traction characteristics and dynamic loads affecting the vehicle, its internat equipment and the passengers has been estimated.
Źródło:: Journal of KONES; 2010, 17, 1; 59-65
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Traction properties of the tracked combat vehicle at lowered power of the driving engine
Autorzy:: Borkowski, W.
Rybak, P.
Michałowski, B.
Wysocki, J.
Hryciów, Z.
Powiązania:: https://bibliotekanauki.pl/articles/246171.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combat vehicle
tank
renewable fuel
drive characteristic
mobility
Opis:: Contemporary and future battlefield may be characterized by a great dynamism of action in both defensive and offensive operations. It is possible, that armoured and mechanized troops, acting at first attack, will suffer from shortages of supplies of materials and other equipment, especially propellants. It concerns particularly a fuel to engines of driving vehicles. Therefore in many cases for engine powering (as multi-propellant engines or adapted to work on substitute fuels) may be used substitute fuel. The fuel parameters sometimes may be much different from parameters of diesel. So it is substantially important to estimate their dynamics during the planning stage of combat missions. Paper includes attempt to estimate dynamic features of the combat vehicles using substitute propellants. Applying substitute propellants leads to reducing the power of the engine up to 10 % comparing to diesel. It has essential impact on lowering the dynamic ratio at similar level. That leads to lower maximum drive speed at given resistance ofmotion and reducing the ability to climb slopes. There also appears deterioration of spurt, extending the time of reaching speeds at about 17%. Paper shows results of traction calculations of combat vehicles and the influence of powering them with renewable fuel on their effectiveness.
Źródło:: Journal of KONES; 2009, 16, 1; 59-68
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Experimental researches of safety of armoured personnel carrier crew during collision with obstacle
Badania eksperymentalne bezpieczeństwa załogi transportera opancerzonego podczas zderzenia z przeszkodą
Autorzy:: Hryciów, Z.
Borkowski, W.
Wysocki, J.
Rybak, P.
Wiśniewski, A.
Powiązania:: https://bibliotekanauki.pl/articles/263268.pdf
Data publikacji:: 2013
Wydawca:: Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:: HYBRID III
passive safety
dynamic loads
cash tests personnel carrier
bezpieczeństwo bierne
obciążenia dynamiczne
testy zderzeniowe
transporter opancerzony
Opis:: The paper presents problems related to dynamic loads of armoured personnel carriers design as well as soldiers located inside them. In order to assess the exposure of soldiers while overcoming terrain and engineering obstacles experimental studies were performed covering a carrier's collision with a concrete obstacle. The scope of the tests included a collision of the armoured personnel carrier with obstacle for two speeds: 6 and 12 km/h. During crash tests, anthropomorphic measurement equipment - Hybrid III 50th Male Dummy type - was used for recording the values of loads affecting the soldiers. During crash tests, two fast video cameras were used for recording motion of the carrier and obstacle's plates. The vehicle body accelerations were recorded as well. ln the paper the research conditions and used measurement equipment were described. Same results of experimental studies were presented. Typical phases of motions of dummies located in driving and landing troop compartment were presented. The values of the carrier's body accelerations in driving and landing troop compartment were compared, displacements of barrier's segments were described. Obtained results indicated that carrier's driver is subjected to higher loads. During crash test at law velocities, the limit values were not exceeded in any analysed case.
W pracy przedstawiono problematykę związaną z obciążeniami dynamicznymi, jakim podlega konstrukcja transportera opancerzonego, jak również znajdującej się w nim załogi w trakcie realizacji misji. W celu oceny narażenia żołnierzy podczas pokonywania przeszkód i zapór inżynieryjnych wykonano badania eksperymentalne polegające na zderzeniu transportera z barierą złożoną z płyt betonowych. Badania wykonano dla dwóch prędkości zderzenia: 6 i 12 km/h. Do badań użyto dwa manekiny badawcze Hybrid III, które umożliwiły m.in. pomiar przyspieszeń głowy oraz sił i momentów działających w górnym odcinku kręgosłupa. W trakcie badań rejestrowano ponadto przemieszczenia transportera i bariery za pomocą szybkich kamer jak również wartości przyspieszeń kadłuba transportera. W artykule scharakteryzowano użytą aparaturę pomiarową. Przedstawiono wybrane wyniki badań eksperymentalnych. Zamieszczono fazy ruchu manekina w przedziale kierowania i przedziale desantowym dla charakterystycznych momentów. Zestawiono wartości opóźnień kadłuba transportera w przedziale kierowania i przedziale desantowym oraz opisano przemieszczenia barier. Otrzymane wyniki wskazują, że większym obciążeniom podlega kierowca pojazdu. Dla analizowanych zderzeń z małymi prędkościami nie zaobserwowano przekroczenia wartości dopuszczalnych obciążeń.
Źródło:: Archiwum Motoryzacji; 2013, 3; 3-12, 87-96
1234-754X
2084-476X
Pojawia się w:: Archiwum Motoryzacji
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Studies on the effectiveness of the innovative road safety system
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Wiśniewski, A.
Powiązania:: https://bibliotekanauki.pl/articles/242956.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road safety barrier
crash tests
computer simulation
LS-DYNA
FEM
Opis:: The paper evaluates the effectiveness of the innovative road safety system equipped with prototype component segments composed of a body made of a plastic filled with reinforced concrete. Main advantages of the new safety barrier include increased resistance to corrosion as well as easy transport and assembly directly on a road section being secured. Model tests were performed on a car of 900 kg weight allowing for carrying out the TB11 tests according to the EN 1317-2 standard. LS-DYNA software was applied for modelling, using the finite element method. The work presents the numerical test results, trajectory of vehicle movement after collision as well as the concrete barrier displacement. It also includes examples of stress in steel bars and joint coupling. Detailed assessing of simulation test results were made on the basis of ASI, THIV and PHD index. They were calculated on the basis of velocity and acceleration courses of selected car bodywork points. Numerical test results confirm the fact that this system meets the normative requirements. They allow for qualifying that system for B impact severity level and W4 working width. The results presented in the paper make the initial stage of the study and further calculations will be oriented towards a possibility of meeting the requirements for higher restraint levels.
Źródło:: Journal of KONES; 2014, 21, 2; 27-32
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Rybak, W." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język