- Tytuł:
- Investigations of the Thickness of Protective Coatings Deposited on Moulds and Cores
- Autorzy:
-
Jamrozowicz, Ł.
Kolczyk-Tylka, J.
Siatko, A. - Powiązania:
- https://bibliotekanauki.pl/articles/380191.pdf
- Data publikacji:
- 2018
- Wydawca:
- Polska Akademia Nauk. Czytelnia Czasopism PAN
- Tematy:
-
protective coating
coating thickness
coating viscosity
foundry core
foundry mold
powłoka ochronna
grubość powłoki
lepkość powłoki
rdzeń odlewniczy
masa odlewnicza - Opis:
- This article presents measurements of the thickness of alcohol-based coatings on sand foundry cores and moulds. These coatings were applied using two methods, the dipping method and the painting method. For the purposes of the study, a zircon alcohol-based coating was prepared with three different levels of nominal viscosity; very thin at 10s, average at 20s, and thick at 30s. The coating was applied to a core made of quartz sand and furan resin. The cores were made of sand with three different grain sizes; dL = 0.22 mm – fine sand, dL = 0.33 mm medium sand, and dL = 0.47 mm coarse sand. In the study, the thickness of the coating obtained to the core was measured immediately after application as well as after drying. Additionally, the extent of penetration into the intergranular spaces of the core matrix was measured. On the basis of this study, the impact of the grain size of the core matrix on the thickness of the coating and its penetration into the core was assessed. The thickness of coatings obtained using different application methods was also assessed.
- Źródło:
-
Archives of Foundry Engineering; 2018, 18, 4; 131-136
1897-3310
2299-2944 - Pojawia się w:
- Archives of Foundry Engineering
- Dostawca treści:
- Biblioteka Nauki
Artykuł