Autor: Z. P. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Influence of the shape of the explosive charge on blast profile
Autorzy:: Hryciów, Z.
Borkowski, W.
Rybak, P.
Wysocki, Z.
Powiązania:: https://bibliotekanauki.pl/articles/247727.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: cylindrical and rectangular charge
blast overpressure
blast impulse
LS-DYNA
ALE
Opis:: When an explosive charge is fired, the nature and mass of the explosive are the only parameters of importance usually considered. The shape however, also plays a major role in the effect of an explosive charge. Knowledge of shape effect can be important before the use of the explosive (in order to create a maximum effect with a given mass of explosive), or in post-explosion damage assessment. The shape effect however is only significant within a certain range from the charge. At longer distance, the produced blast wave tends to be spherical. The shock wave parameters studied in this work are the peak overpressure and the first positive impulse. A series of numerical test has been performed in order to determine the range of influence of the charge shape. Different locations of initiation were compared. A hemispherical charge was point detonated at its centre whereas a cylindrical shape was detonated at the centre of an upper or lower plane. Numerical simulations of near field burst were conducted using LS-DYNA software. During numerical tests a pressure fields were determined for different shapes of explosive charges as well as the pressure waveforms at points located 1000 mm from a centre. Additionally, reference pressure history curves from LOAD_BLAST_ENHANCED procedure were calculated.
Źródło:: Journal of KONES; 2014, 21, 4; 169-176
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Modele częściowe w analizie obciążeń struktur nośnych wozów bojowych
Partial models in stress analysis of supporting structure of combat vehicles
Autorzy:: Borkowski, W.
Rybak, P.
Hryciów, Z.
Powiązania:: https://bibliotekanauki.pl/articles/208431.pdf
Data publikacji:: 2006
Wydawca:: Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:: bojowy wóz piechoty
struktura
obciążenie
modele częściowe
wytężenie
infantry fighting vehicle
supporting structure
loading
partial model
effort
Opis:: W pracy przedstawiono wyniki badań modelowych bojowego wozu piechoty. Model pojazdu oraz modele częściowe opracowano w oparciu o metodę elementów skończonych. Analizę wytężenia struktury pojazdu realizowano wykorzystując modele częściowe. Wykazano, że do analizy zagadnień dynamiki konstrukcji można dobrać taki model częściowy, który wystarczająco dokładnie odwzorowuje zachowanie modelu pełnego.
The paper presents some results of model investigation of a combat vehicle model. The vehicle model of and its partial model were developed on the basis of finite elements method. Stress analysis of a supporting structure of vehicle was performed using partial models. It was proved, that partial models are useful for dynamic analysis. Comparisons of the results for a complete combat vehicle and a partial model of its construction are executed as well.
Źródło:: Biuletyn Wojskowej Akademii Technicznej; 2006, 55, 4; 221-232
1234-5865
Pojawia się w:: Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Researches of protective structures of combat vehicles loaded by explosion
Badania struktur ochronnych pojazdów bojowych przed eksplozją
Autorzy:: Borkowski, W.
Rybak, P.
Hryciów, Z.
Powiązania:: https://bibliotekanauki.pl/articles/241719.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: wóz bojowy
modelowanie
struktura ochronna
ładunek wybuchowy
combat vehicle
modelling
protective structures
blowing charge
Opis:: In the paper were described the threats of combat vehicles during realizing tasks in frames of stabilization and peacekeeping missions. The map of menaced by conflicts regions of the world was presented. These regions can be a field of combat operations in the feature. It the basis of available materials and results of experimental researches the effects of acting of blowing charge on combat vehicles during fights in urbanized and mountain terrain were presented. The general directions of research and development were described particularly from the point of view of possibility of increasing a protection level of combat vehicles crews against combat means. These means are characteristic in stabilization and peacekeeping missions as well as in combat operations. The chosen results of model researches of worked out protective structures were presented. The protective structures were loaded by shock wave generated by hypothetic, unconventional blowing charge or mine. In the paper was evidenced the possibility and urgency of selection of the most profitable structure parameters of protected part of combat vehicles against expected threats as well.
W pracy opisano zagrożenia wozów bojowych podczas realizacji zadań w ramach misji stabilizacyjnych i pokojowych. Przedstawiono mapę regionów świata zagrożonych konfliktami. Regiony te mogą być obszarami przyszłych działań wojsk. W oparciu o dostępne materiały i wyniki własnych badań eksperymentalnych przedstawiono efekty oddziaływania ładunków wybuchowych na pojazdy wojskowe podczas walk w terenie zurbanizowanym i górzystym. Opisano ogólne kierunki prac badawczych i rozwojowych prowadzące w efekcie do podwyższenia poziomu ochrony załóg wozów bojowych przed środkami bojowymi, charakterystycznymi dla działań pokojowych i misji stabilizacyjnych, ale mogące występować również w działaniach bojowych. Przedstawiono wybrane rezultaty badań modelowych opracowanych struktur ochronnych dla wozów bojowych. Strukturę ochronną poddawano oddziaływaniu fali uderzeniowej generowanej hipotetycznym, niekonwencjonalnym ładunkiem wybuchowym lub miną. W pracy wskazano również możliwość i potrzebę doboru najkorzystniejszych parametrów struktury dla ochranianych części wozu bojowego przed spodziewanym zagrożeniem.
Źródło:: Journal of KONES; 2007, 14, 1; 101-110
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Testing the results of a passenger vehicle collision with a rigid barrier
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/245925.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road safety barrier
crash tests
computer simulation
LS-DYNA
Opis:: High accident index in Poland, including one of the highest death rates in EU, forces undertaking the intense works in order to improve traffic safety. Published road accident statistics indicate that the most dangerous accidents include a vehicle collision with a tree, post or other road object. The road safety barriers make the road infrastructure elements that can signiflcantly protect against that type of accidents. The work presents basie tasks and requirements imposed on the barriers. Problems related to a proper selection of the barriers have been also highlighted. The tools facilitating the barrier design include numerical modelling. The modelling has been done by means of the LS-DYNA software, using the finite element method. A general structure and a developed barrier model as well as vehicle model have been presented. The conditions of the numerical tests have been also specifled. The work presents the results of influence of car impact angle with a rigid safety barrier. Presented results refer to a car o f mas s of 900 kg, making a bas is for the tests of the limiting systems for several limiting levels: including normal limit N2 (according to EN 1317-2). Compared to standard requirements, the scope of numerical tests has been extended by other car impact angle values. The work presents vehicle trajectories and deformations of their bodies. It also includes examples of velocities and acceleration courses and acceleration severity indexes (ASI) calculated on their basis. Obtained results indicate that the barrier location angle has a high influence on the safety level ofthe car passengers as well as on the car motion trajectory after collision
Źródło:: Journal of KONES; 2010, 17, 1; 51-57
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Simulation tests on shaping the working width of the concrete protective systems
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/247035.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Opis:: The work addresses the road traffic safety issue related to the use of road safety barriers. It describes the tasks that have to be fulfilled by the protective system. It presents the barrier assessment conditions according to the requirements ofthe existing standards as far as the working barrier width is concerned. The objective of the work is to evaluate the possibilities of shaping the working width of the concrete protective systems. They have been executed on the basis of a concrete barrier equipped with a prototype joint linking individual barrier segments. It allowed defining the maximum angle of relative angle displacement of the adjacent segments. The model tests have been performed with a 900kg passenger car which allows performing TB11 test according to EN1317-2 standard The modelling has been performed with LS-DYNA software, which uses the finite element method. The work presents the numerical test results, vehicle motion trajectory and barrier displacement. It also includes examples of speed and acceleration courses of selected vehicle elements and the ASI index calculated on that basis which is used to assess the danger level for the vehicle passengers. Obtained results indicate that there is a possibility of shaping the dynamic bending and the working barrier width depending on assumed joint (boundary angle) parameters. Further areas of the analysis have been also defined.
Źródło:: Journal of KONES; 2010, 17, 2; 43-50
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Experimental crash tests involving passenger cars and the prototype concrete protective barrier
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/247037.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: experimental tests
test track
concrete protective barrier
crash test
experimental verification
Opis:: The work describes the experimental test methodology and results obtained during the experimental crash tests involving passenger cars and the prototype concrete protective barrier, which was built according to the original design prepared by the authors of this article. The crash tests involving a vehicle and the protective barrier cover the experiment results in three basic areas: severity ofthe collision impact on vehicle passengers, the impact on a vehicle and deformation of the road protective system. Applied testing procedures meet the requirements of the national standards, that make the equivalents of the European standards EN-1317-1:1998, EN-1317-2:1998, EN-J 317-3:2000. The tests have been performed for selected crash criteria (TB11 and TB32), for a normal restrain level (N2), using three passenger's cars (Dodge Neon and 2 units of Suzuki Swift). Applied testing procedures meet the requirements of the national standards [1-5]. The work presents examples of experimental test results in three basie areas: intensity of the crash impact on the vehicle passengers, the impact on a vehicle and deformation of the road protective system. The test results have been presented in a form of courses of speeds and accelerations along the vehicle body axes x, y, z. Acceleration severity index (ASI), theoretical head impact velocity (THIV), post-impact head delay (PHD), vehicle cabin deformation index (VCDI) and deformation levels of the road protective system (W) have been also defined.
Źródło:: Journal of KONES; 2010, 17, 2; 35-42
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: The effect of suspension technical condition on multi-axis vehicle dynamic loads
Autorzy:: Borkowski, W.
Rybak, P.
Hryciów, Z.
Michałowski, B.
Powiązania:: https://bibliotekanauki.pl/articles/247096.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
multi-axial special vehicles
combat vehicles
reliability
dynamic loads
Opis:: The paper describes the operating conditions of multi-axial special vehicles presents the tasks and risks during the so-called peacekeeping and stabilization mission. Given are described risks of travel on the roads and unpaved roads, in towns and hilly terrain. To be able to carry out driving in difficult conditions, the main components of fighting vehicles must have a high reliability. This also applies to the burden of combat. The paper presents a method to assess the condition of the suspension, consequently, its influence on dynamic loads on the crew and the internal equipment of the vehicle, presents a mathematical model of the vehicle similar to the multi-axis wheeled armoured personnel carrier. Describes the numerical model developed on the basis of it. It concerns on performed research for the most common cases. Are examples of the results of numerical estimates of the impact on the failure of the suspension, including damage to the wheels and suspension components, on the level of dynamic loads acting on the vehicle, its equipment and people stay in it. The model vehicle is a versatile tool for analyzing the dynamics of different types of vehicles, including tracked combat vehicles and multiaxial vehicles.
Źródło:: Journal of KONES; 2011, 18, 4; 421-426
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Numerical simulation of the standard TB11 and TB32 tests for a concrete safety barrier
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/247654.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: road safety barrier
crash tests
computer simulation
LS-DYNA
Opis:: The work presents the traffic safety issue related to a use of the road protective barriers. It describes a purpose and tasks that should be fulfilled by the safety system. Conditions of crash tests and their evaluation according to the requirements of the existing standard documents are also presented. The purpose of the work was to evaluate the influence of applied barrier type on the car collision process. A barrier composed of the segments that can move on the ground due to the impact force and a barrier fixed to the road surface were assumed for the model tests. The modelling was carried out by means of the LS-DYNA sofrware, using the finite element method. The tests were performed for two types of cars, mass of 900 kg and 1500 kg. The work includes the numerical test results, deformations of car bodies and barrier displacement. Examples of velocities and acceleration courses of selected vehicle elements and the ASI index, calculated on their basis, used for evaluation of the passenger danger level were also presented. Obtained results indicate a significant influence of the barrier installation method (joint with the road) on the collision process course and dynamic loads affecting the car passengers. They also indicate directions of safety improvement.
Źródło:: Journal of KONES; 2010, 17, 4; 63-71
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Studies on possibilities of increasing the impact resistance of KTO Rosomak
Autorzy:: Borkowski, W.
Rybak, P.
Hryciów, Z.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/241711.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: wheeled armoured carrier
loads
mine explosion
Opis:: Military vehicles are mostly designed in order to provide effective execution of tasks in regions of expected actions and operation conditions. During execution of projects, resulting from participation in peace making and stabilization missions, military vehicles are subject to the impact of various mines and improvised explosives. In many cases, the explosive material mass included in the explosive charges affecting the vehicles significantly exceeds the values specified in standards defining the required protection levels assumed at the design stage. The above determines the search for additional shields or energy-absorbing elements reducing the effects of such influence. Information concerning design solutions is usually classified or very limited. Majority of companies dealing with that issue provides information concerning the scope of their business, highlighting the military area thus high efficiency of their protective solutions, possibly presenting a general outline of a particular solution. This paper presents selected results of analyses and studies being carried out and obtained results of solutions to problems included in the study tasks covering a considered subject. Proposed solutions of protective shields against mines and IED for the KTO Rosomak are presented.
Źródło:: Journal of KONES; 2012, 19, 4; 101-110
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Numerical research on the special container of increased technical and design requirements
Autorzy:: Rybak, P.
Borkowski, W.
Hryciów, Z.
Michałowski, B.
Wiśniewski, A.
Wysocki, P.
Powiązania:: https://bibliotekanauki.pl/articles/242624.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: numerical research
dynamical loads
simulation
Opis:: This paper presents issues related to the process of designing a 30-feet container to be used as a mobile laboratory for collecting the environmental samples and identification of biological threats. Tactical and technical assumptions for the container, taking into account the requirements of the transport and movement of the army at long distances and in the difficult areas by means of transport characterized by increased traction properties, made the starting point. A possible way of relocation on the land roads using commonly available and military means of transport, possibilities of loading and unloading using the autonomic system and automatic levelling system are described. It describes the process of creating the MES model of the supporting structure and assumptions taken for that purpose. The basic assumption included invariability of shape, geometry and dimensions of a container compared to containers recognized in the world as the standard ones. Some results of numerical calculations carried out at two stages are presented. At the first stage, the issues on the own values were solved. Frequencies of own vibrations and associated forms of vibrations were identified. At the second stage, forced container vibrations were analysed. Resistance calculations were performed for the supporting structure of the container in the aspect of evaluation of the strain condition of the whole structure, as well as its components for assumed load variants. A variability of resistance calculations takes into account such cases as the influence of the under-container trailer riding on the uneven ground, loading and unloading a container from a trailer using autonomous system, diversity of loads on the supports resulting from the change of the ground density under the supports. A preliminary analysis of container transport possibilities and transport unit traction properties have been also carried out.
Źródło:: Journal of KONES; 2013, 20, 3; 347-352
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Wieloosiowy pojazd specjalny w warunkach obciążenia wybuchem
Multi-axle special-purpose vehicle in blast load conditions
Autorzy:: Borkowski, W.
Rybak, P.
Hryciów, Z.
Michałowski, B.
Powiązania:: https://bibliotekanauki.pl/articles/387001.pdf
Data publikacji:: 2008
Wydawca:: Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:: pojazd wieloosiowy
obciążenie wybuchem
pojazd
badania konstrukcji
multi-axle vehicle
vehicle
blast load conditions
Opis:: W pracy opisano zagrożenia wieloosiowych pojazdów specjalnych w działaniach wojennych oraz w ramach misji pokojowych i stabilizacyjnych. Szczególną uwagę zwrócono na zagrożenia wynikające z tzw. naziemnej wojny minowej oraz z realizacji zadań patrolowo – interwencyjnych. Przedstawiono założenia przyjęte do budowy modelu matematycznego obiektu badań oraz modelu obciążenia wybuchem. Model obiektu badań zbudowano przy wykorzystaniu metody elementów skończonych. Modele zweryfikowano w oparciu o rezultaty własnych badań eksperymentalnych. Badania konstrukcji pojazdu specjalnego zrealizowano dla wybranych, najczęściej spotykanych przypadków oddziaływań improwizowanych ładunków wybuchowych. Zaprezentowana metodyka badań pozwala na wielowariantowe analizowanie konstrukcji nadwozi i struktur nośnych pojazdów specjalnych obciążonych oddziaływaniem powybuchowych fal uderzeniowych.
In the paper there were described threats to multi-axle special-purpose vehicles in combat environment as well as within the confines of peace and stabilization missions. Into particular account was taken threats resulting from either so-called ground mine war or realization of patrol and intervention tasks. There were presented assumptions accepted in the process of creating mathematical model of the object and also the model of the blast load. Both models were built using finite elements method. Verification was accomplished based on the results of our own experimental tests. Testing the model of the vehicle structure was realized for most often encountered cases of improvised explosives applications. Presented methodology of research empowers to multivariate analysis of body structure as well as carrier chassis of specialized vehicles under the influence of explosive shock wave loads.
Źródło:: Acta Mechanica et Automatica; 2008, 2, 1; 9-12
1898-4088
2300-5319
Pojawia się w:: Acta Mechanica et Automatica
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Testing of protective covers for special vehicles
Autorzy:: Rybak, P.
Borkowski, W.
Michałowski, B.
Hryciów, Z.
Powiązania:: https://bibliotekanauki.pl/articles/243297.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combat vehicle
transportation vehicle
explosive charge
modelling
protective structure
Opis:: In the paper were presented threats happen to special and transportation vehicles while task performing within the confines of peace forcing and keeping missions on world areas threatened by conflicts and that could be areas of unitfuture actions. Based on available materials and authors results of numerical and experimental tests, effects of various explosive charges action on special vehicles were presented. Such explosive charges could be used during fighting in urban and mountainous areas as well as other with limited area. Were presented directions of research and development leading to increase protection level for people, inside special and transportation vehicle, against combat agents characteristic for peace keeping and stabilization missions that could be used also while warfare. In the paper were presented numerical model of protection structure, which were worked out on the basis of the Finite Element Method. There are presented some results of experimental and modelling tests of after blast shock wave action on armoured shell and prepared protection structures for special and transportation vehicles. The maximum deformations of research objects and stress in construction were put. The comparisons of results for numerical and experimental researches were introduced. Protecting structure was loaded by shock wave pressure generated by hypothetical unconventional explosive charge (improvise explosive device or non-contact mine). In the paper were also made effort to point at possibility and necessity to choose the most effective parameters of structure for protected part of combat vehicle against potential threats.
Źródło:: Journal of KONES; 2008, 15, 1; 219-226
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Prototype articulated joint in connections of the concrete protective barrier
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/244656.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
road safety
concrete protective barrier
crash test
articulated joint
Opis:: The work describes methodology of selection of a prototype articulated joint used to connect the segments of the concrete protection barrier. The barrier and the joint have been made according to the original project of the authors of this paper. Dimensions of the component elements of the joint were defined on the basis of numerical calculations in LS-DYNA system, using finite element method. They also allowed to identify places sensible to damage. Based on the project, the experimental tests have been performed for the joint strength to stretching. The tests performed on the resistance machine showed improper technology and poor quality of welds joining individual elements, particularly the bolt with connecting steel. Results of these tests made the basis for introducing the changes to the project. Repeated tests confirmed their rightness. The final evaluation of quality and usefulness of the prototype articulated joint in the connections of movable protection barrier were defined during the crash tests on the test track of the Certified Research Laboratory of the Research Institute for Roads and Bridges. The crash tests were performed for selected collision criteria (TB11 and TB32), normal restrain level (N2), using three passengers cars. Applied concrete barrier test procedures are in accordance with the requirements of national standards, that make the equivalents of the European standards.
Źródło:: Journal of KONES; 2011, 18, 1; 85-92
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Experimental researches of dynamic loads of armoured personnel carrier and its crew during collision with rigid obstacle and all - terrain vehicle
Autorzy:: Borkowski, W.
Hryciów, Z.
Rybak, P.
Wysocki, J.
Wiśniewski, A.
Powiązania:: https://bibliotekanauki.pl/articles/242892.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: armoured personnel carrier
dynamic load
dummy
crash test
passive safety
Opis:: The paper presents problems related to dynamic loads of armoured personnel carriers design as well as soldiers located inside them. During tactical operation, there is often the need for ramming other vehicles or terrain obstacles in order to provide road possibility. The lack in armoured vehicles, commonly used in cars crumple zones, will result in large values of accelerations. This can cause significant risk to the crews of vehicles. In order to assess the exposure of soldiers while overcoming terrain and engineering obstacles experimental studies were performed covering a carrier’s collision with a rigid barrier and ramming of all-terrain vehicle. In the paper the research conditions and used measurement equipment were described. A four-wheel SKOT personnel carrier and Tarpan Honker car, out of service, was used for the tests. The tests were carried out within the area of the Military Institute for Armoured and Automotive Technology in Sulejówek. During crash tests, anthropomorphic measurement equipment – Hybrid III 50th Male Dummy type – was used for recording the values of loads affecting the soldiers. The article presents some results of experimental studies. The values of the carrier’s body accelerations in driver’s and landing troop compartment were compared as well as dynamic loads of test dummies. The results obtained during vehicle ramming prove that these types of actions do not cause serious threats for the members of the carrier crew.
Źródło:: Journal of KONES; 2013, 20, 3; 71-78
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Experimental research on identifying data for modelling special purpose vehicles
Autorzy:: Rybak, P.
Wysocki, J.
Hryciów, Z.
Michałowski, B.
Wiśniewski, A.
Powiązania:: https://bibliotekanauki.pl/articles/245056.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: special purpose vehicle
combat vehicle
loads
experimental research
modelling
Opis:: The work presents selected results of experimental research on special purpose vehicles used on military training grounds, and bench tests of their main structural elements. The results are connected mainly with identifying the main vibration parameters of those vehicles (regarding weight, resilience and damping), and with the assessment of the level of dynamic loads. The more output data experimental research provides, the more input data we have for designing models. Determined in laboratory tests, weight parameters (regarding weight and moments of inertia), coefficients of stiffness and damping, as well as selected resilience and damping characteristics, are applied in the process of creating the numerical models of assemblies, systems, and complete vehicles. The numerical models created are subject to full verification in order to minimize the differences between the real objects and their representations. The models are applied in multivariate simulation tests of the existing design solutions, upgrading them, or creating new designs. Due to a certain sensitivity of the range of special purpose vehicles, the results of experimental tests and simulation analyses presented in the work are mainly qualitative rather than quantitative.
Źródło:: Journal of KONES; 2017, 24, 3; 245-252
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Z. P." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język